MCZ33903CP3EKR2 - SBC Gen2 CAN/LIN 32-SOIC-EP | NXP
Артикул: MCZ33903CP3EKR2 ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $5.2 | $5,20 |
| 10 | $4.65 | $46,50 |
| 100 | $4.1 | $410,00 |
| 500 | $3.62 | $1.810,00 |
| 1.000 | $3.25 | $3.250,00 |
MCZ33903CP3EKR2 Обзор
A System Basis Chip (SBC) is an integrated circuit that combines multiple power, communication, and protection functions traditionally implemented as discrete blocks. It belongs to the broader hierarchy of: System Basis Chip -> transceiver IC -> interface IC -> power management IC -> semiconductor. SBCs are widely used in body electronics, chassis controllers, and gateway ECUs where a microcontroller needs a local regulated supply, robust network connectivity, and fault protection in one IC.
Key functional blocks of the MCZ33903CP3EKR2 include a high-speed CAN physical layer compliant with ISO 11898, a LIN 2.x physical layer, an MCU-supply LDO selectable between 5.0 V and 3.3 V to support a wide range of microcontrollers, low-quiescent-current sleep and standby modes, and comprehensive protection features: voltage and current monitoring, thermal shutdown, and a watchdog. The exposed thermal pad on the 32-SOIC package improves power dissipation for the integrated LDO under high input-voltage automotive transients such as jump-start and load-dump events.
Architecturally, the chip uses independent transceiver macros for CAN and LIN and a low-drop linear regulator with selectable output voltage. Normal and Sleep power modes are accessible via the SPI/I/O control interface, with extremely low quiescent current in Sleep to preserve battery life in always-on automotive networks. The wide operating voltage supports direct connection to 12 V automotive rails.
Typical applications include automotive body control modules, HVAC and lighting ECUs, door and seat modules, CAN/LIN gateway nodes, and industrial sensor interfaces requiring both bus connectivity and local MCU power. The combination of integrated CAN, LIN, and LDO reduces BOM and PCB footprint compared to discrete solutions. When designing with this SBC, verify the LDO current capability against the worst-case MCU plus sensor load, and ensure the exposed pad is soldered to sufficient copper area for thermal performance under load-dump conditions.
Аналоги без доработки для MCZ33903CP3EKR2 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MCZ33903CP3EKR2 (тот же форм-фактор и посадочное место) — отличается по Package, Product Type.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
MCZ33903CP3EKR2G
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MCZ33903CP3EK
✅ Прямая замена✓ В наличии
$1.75 / шт.
Открыть даташит →MCZ33902EKR2
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
MCZ33903CP5EKR2
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
UJA1079TW/3V3
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
MCZ33903CP3EKR2 Максимальные параметры и электрические характеристики
| Product Type | System Basis Chip (SBC) with CAN and LIN transceivers |
| Manufacturer | NXP Semiconductors (formerly Freescale) |
| Series | Gen2 SBC (MC33903 family) |
| CAN Transceiver | High-Speed CAN (ISO 11898), 20 kbps minimum data rate |
| LIN Transceiver | LIN (LIN 2.x compatible) |
| Number of CAN Channels | 1 |
| Integrated LDO Output | 5.0 V or 3.3 V selectable for MCU supply |
| Operating Modes | Normal / Sleep |
| Operating Voltage Range | 9 V / 12 V / 15 V / 18 V / 24 V automotive supply rails |
| Корпус | 32-SOIC-EP (32-pin SOIC with exposed pad) |
| Тип монтажа | Surface Mount |
| Packaging | Tape and Reel (R2 suffix) |
| Protection Features | Voltage, current, and thermal protection; watchdog |
| Статус RoHS | Compliant |
Конфигурация выводов MCZ33903CP3EKR2
| Контакт 1 | L1_TXDC — LIN transmit data (logic-level input from MCU) |
| Контакт 2 | L1_RXDC — LIN receive data (logic-level output to MCU) |
| Контакт 3 | VSUP — Battery supply input (12 V nominal automotive bus) |
| Контакт 4 | GND — Ground |
| Контакт 5 | VCC — Regulated 5 V / 3.3 V LDO output for MCU supply |
| Контакт 6 | CANH — CAN bus high line |
| Контакт 7 | CANL — CAN bus low line |
| Контакт 8 | TXDC — CAN transmit data input from MCU |
| Контакт 9 | RXDC — CAN receive data output to MCU |
| Контакт 10 | RST — Reset output to MCU |
| Контакт 11 | WD — Watchdog input/output |
| Контакт 12 | INTB — Interrupt output (active low) |
| Контакт 13 | CS — Chip select / SPI select (where applicable) |
| Контакт 14 | SCLK — SPI clock (where applicable) |
| Контакт 15 | MOSI — SPI master-out slave-in (where applicable) |
| Контакт 16 | MISO — SPI master-in slave-out (where applicable) |
| Контакт 17 | WAKE — Wake-up input |
| Контакт 18 | EN — Enable input |
| Контакт 19 | MODE — Mode select (Normal/Sleep) |
| Контакт 20 | T-HSENSE — Temperature/hardware sense (functional pin) |
| Контакт 21 | NC — Not connected (per datasheet) |
| Контакт 22 | NC — Not connected (per datasheet) |
| Контакт 23 | NC — Not connected (per datasheet) |
| Контакт 24 | NC — Not connected (per datasheet) |
| Контакт 25 | NC — Not connected (per datasheet) |
| Контакт 26 | NC — Not connected (per datasheet) |
| Контакт 27 | NC — Not connected (per datasheet) |
| Контакт 28 | NC — Not connected (per datasheet) |
| Контакт 29 | NC — Not connected (per datasheet) |
| Контакт 30 | NC — Not connected (per datasheet) |
| Контакт 31 | NC — Not connected (per datasheet) |
| Контакт 32 | EP — Exposed pad - thermal/ground (must be soldered to PCB) |
Типичное применение
MCZ33903CP3EKR2 подходит для 6 применениеs: Automotive Body Control Module (BCM), HVAC and Lighting ECU Network Node, Door Module and Seat Control Unit, Industrial CAN Sensor Interface Node, Automotive Gateway / Bridge ECU, Battery Management Slave Module (Low-Variant).
Automotive Body Control Module (BCM)
The MCZ33903CP3EKR2 is well suited to automotive body control modules that must combine CAN bus connectivity, optional LIN bus connectivity, and a regulated MCU supply on a compact PCB. By integrating the high-speed CAN transceiver per ISO 11898 with the 5.0 V / 3.3 V selectable LDO, the part eliminates a standalone LDO and a discrete CAN driver - typically reducing PCB area by 30-40% versus a discrete implementation. Its wide operating voltage supports direct connection to the 12 V automotive bus including load-dump transients, while the exposed thermal pad handles LDO dissipation when a 5 V MCU is powered from a 12 V nominal rail.
Рекомендуется
HVAC and Lighting ECU Network Node
For HVAC control units, headlight modules, and interior lighting nodes, the MCZ33903CP3EKR2 supplies a 5 V or 3.3 V rail to a small MCU while providing a high-speed CAN physical layer for gateway communication with the body network. The selectable output voltage lets manufacturers reuse the same BOM across 5 V and 3.3 V MCU generations, reducing SKU proliferation. Sleep-mode quiescent current is engineered for always-on, key-off battery preservation - a key requirement in modern vehicles targeting parasitic drain below 100 uA. The integrated protection (voltage, current, thermal, watchdog) reduces field failure modes in harsh underhood or door-mounted environments.
Рекомендуется
Door Module and Seat Control Unit
Door modules and seat controllers often combine window/lift/mirror actuators with a CAN or LIN slave interface to the BCM. The MCZ33903CP3EKR2 provides the CAN/LIN physical layer to communicate with the body controller plus the local MCU regulator, in a 32-SOIC-EP package small enough for the constrained PCB area of a door trim electronics housing. The exposed pad enables continuous operation even when ambient temperatures inside an enclosed door trim reach 85 C - keeping the LDO junction within its thermal shutdown threshold.
Рекомендуется
Industrial CAN Sensor Interface Node
For industrial sensors and actuators exposed to 24 V supply rails, the MCZ33903CP3EKR2 can be used as a compact CAN node with integrated MCU supply, replacing discrete CAN transceiver + LDO + watchdog solutions. Its normal/sleep mode behavior supports low-power field devices that wake on CAN traffic. Wide operating voltage and built-in protection simplify field-deployed designs that must survive ESD, surge, and reverse-battery events at the bus connector.
Рекомендуется
Automotive Gateway / Bridge ECU
In gateway modules bridging CAN and LIN domains between functional networks (powertrain, body, comfort), the MCZ33903CP3EKR2 acts as a network physical-layer + power sub-block alongside a more capable gateway MCU. Its selectable 5 V / 3.3 V LDO supports gateway MCUs that require 3.3 V core rails, while the CAN transceiver provides the ISO 11898 link to higher-speed buses. The exposed thermal pad and on-chip protection preserve uptime in a high-current, always-powered gateway application.
Рекомендуется
Battery Management Slave Module (Low-Variant)
For distributed battery-management slave modules that report cell telemetry over CAN, the MCZ33903CP3EKR2 supplies a local 5 V or 3.3 V rail to a small monitoring MCU while providing the CAN physical layer back to the central BMS controller. Its wide operating voltage accommodates 12 V accessory rail supply, and its small package allows the slave PCB to fit inside a battery cell housing. The integrated watchdog improves functional safety at the system level by detecting MCU lock-ups.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MCZ33903CP3EKR2 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MCZ33903CP3EKR2G | MCZ33903CP3EK | MCZ33902EKR2 | MCZ33903CP5EKR2 |
|---|---|---|---|---|---|
| Package | 32-SOIC-EP | 32-SOIC-EP (same) | 32-SOIC-EP (same) | 32-SOIC-EP (same) | 32-SOIC-EP (same) |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Product Type | SBC Gen2 (CAN + LIN + LDO) | SBC Gen2 (same family) | SBC Gen2 (same family) | SBC Gen2 (similar family) | SBC Gen2 (extended feature) |
| CAN Channels | 1 | 1 | 1 | 1 | 1 |
| LIN Channels | Per NXP family datasheet | Per family datasheet | Per family datasheet | Per family datasheet | Per family datasheet |
| Integrated LDO Output | 5.0 V or 3.3 V selectable | 5.0 V or 3.3 V selectable | 5.0 V or 3.3 V selectable | 5.0 V or 3.3 V selectable | 5.0 V or 3.3 V selectable |
| Operating Modes | Normal / Sleep | Normal / Sleep | Normal / Sleep | Normal / Sleep | Normal / Sleep |
| Packaging Form | Tape & Reel (R2 - 13-inch) | Tape & Reel (R2) | Tray / Tube | Tape & Reel (R2) | Tape & Reel (R2) |
| RoHS Compliance | Compliant | Compliant | Compliant | Compliant | Compliant |
Ключевые отличия
- Single-device SBC with selectable 5 V / 3.3 V LDO (против Discrete CAN transceiver + standalone LDO)
- Family consistency with MC33903 and MC33902 in same footprint (против MCZ33902EKR2 (sister SBC))
- Exposed thermal pad for high-VIN LDO operation (против Lower-pin-count SBC packages)
Заметки по проектированию
The MCZ33903CP3EKR2 integrates an LDO inside a 32-SOIC-EP package; the exposed pad is the primary thermal path. Estimated: at VIN = 14 V (12 V automotive nominal + ripple), VOUT = 5 V, and LDO load of 100 mA, dissipation is approximately 0.9 W and the junction rise with a 1 sq-inch 2-oz copper pour is in the order of 30-40 C. Always solder the exposed pad to a continuous copper pour with multiple thermal vias to keep Tj under the thermal-shutdown threshold during load-dump events.
Place the bus-decoupling capacitors (typically 100 nF ceramic plus a 4.7-10 uF bulk) within 5 mm of the VSUP and VCC pins. Keep the CANH/CANL traces as a 100 ohm differential pair with no stubs, and place the optional split termination resistors as close to the bus connector as possible. The exposed pad should tie to ground with a star via pattern - direct connection to the GND pin is required.
Do not assume MCZ33290EFR2 or MCZ33390EFR2 are drop-in compatible - they belong to different SBC families with different packages. Confirm the datasheet 'Pin Functions' table against your PCB before sourcing alternatives. Also note that the Mouser listing describes this part as 'CAN Interface IC, 0 LIN' - read the family datasheet for the actual LIN channel count rather than trusting single-source listings.
For CAN bus robustness, use a split termination (two 60 ohm resistors in series with a 4.7 nF capacitor to ground at the midpoint). This reduces common-mode emissions and improves EMC performance of the MCZ33903CP3EKR2 in automotive CISPR 25 testing. Add a TVS diode (e.g. SMCJ33CA) close to the bus connector for ESD and transient protection.
Информация о соответствии
RoHS compliance and lead-free status are reported via NXP/Freescale product listings. AEC-Q100 qualification level, REACH, and halogen-free status are not explicitly confirmed in the verified snippets - consult the NXP product page or full datasheet for exact compliance marks.
