MCZ33905CD3EK - SBC CAN HS 3.3V Dual LIN 54-SOIC-EP | NXP
Артикул: MCZ33905CD3EK ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $9.5 | $9,50 |
| 10 | $8.55 | $85,50 |
| 100 | $7.6 | $760,00 |
| 500 | $6.84 | $3.420,00 |
| 1.000 | $6.08 | $6.080,00 |
MCZ33905CD3EK Обзор
A System Basis Chip (SBC) is an automotive-grade mixed-signal IC that consolidates the power management, communication transceivers, and protective functions a microcontroller needs around it. Instead of placing a stand-alone LDO, CAN transceiver, LIN transceiver, and reset supervisor separately, an SBC merges these blocks behind a single fault-tolerant interface, which simplifies board layout, reduces BOM count, and improves diagnostic coverage for chassis and body electronics modules.
The device operates from a 5.5V to 28V supply range and supports normal/sleep modes with low quiescent current for battery-friendly standby. It integrates enhanced high-speed CAN compliant with ISO 11898-2 and ISO 11898-5, with local and bus failure diagnostics, protection, and fail-safe behavior. Two LIN 2.x transceivers support body-domain slaves such as seat controllers, window lifters, mirror modules, and sensor clusters. A dedicated 3.3V low-dropout regulator powers the host MCU, while a separate tracker/auxiliary output supports additional ICs.
In operation, the MC33905 sits between the 12V automotive battery rail and a 32-bit MCU. The internal 3.3V LDO feeds the MCU core, the CAN bus is routed through the integrated HS-CAN transceiver to bus pins, and the dual LIN channels are exposed for slave-node communication. The exposed pad (EP) of the 54-SOIC-EP provides the thermal path for sustained battery-voltage load transients.
Key applications include automotive body control modules, gateway modules, HVAC controllers, instrument clusters, and industrial CAN nodes that require both LIN master/slave and HS-CAN. Engineers typically select this SBC when a single-chip solution reduces PCB area, BOM cost, and EMC complexity in mixed CAN/LIN networks.
This page synthesizes distributor availability, parametric positioning, and design guidance not found in the manufacturer datasheet, including a curated cross-reference of same-family NXP SBCs that share the same footprint and pinout, enabling drop-in replacement in long-life programs.
When designing, ensure the exposed pad is soldered to a sufficiently large copper pour to meet the thermal and ground-return requirements of automotive load-dump and jump-start transients, and respect the absolute maximum Vbat rating during reverse-battery events.
Аналоги без доработки для MCZ33905CD3EK — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MCZ33905CD3EK (тот же форм-фактор и посадочное место) — отличается по CAN Data Rate, CAN Interface, Function, LIN Interface, Package.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
MCZ33903CD3EK
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$3.9 / шт.
Открыть даташит →MCZ33904CD3EK
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
MCZ33905D3EK
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
MCZ33905CD3EKR2
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MCZ33905CD3EK Максимальные параметры и электрические характеристики
| Product Type | System Basis Chip (SBC) |
| Manufacturer | NXP Semiconductors |
| Series | MC33903/4/5 second-generation SBC |
| Функция | CAN + LIN + 3.3V LDO System Basis Chip |
| Supply Voltage Range | 5.5 V to 28 V |
| On-board MCU Regulator | 3.3 V LDO |
| CAN Interface | High-Speed CAN (ISO 11898-2 and ISO 11898-5) |
| CAN Data Rate | 20 kbps minimum; up to 1 Mbps typical for HS-CAN |
| LIN Interface | Dual LIN 2.x transceivers |
| Operating Modes | Normal / Sleep |
| Корпус | 54-SOIC-EP (54-pin SOIC with Exposed Pad) |
| Тип монтажа | Surface Mount |
| Lead-Free / RoHS | Compliant |
| Operating Temperature (Automotive) | -40C to +125C (Grade 1) |
| Applications | Body Control Modules, Gateway, HVAC, Instrument Cluster, Industrial CAN |
| Diagnostic Features | Local and bus failure diagnostics, protection, fail-safe |
Руководство по цоколевке MCZ33905CD3EK в корпусе 54-soic-ep (54-pin soic with exposed pad)
Цоколевка для MCZ33905CD3EK (корпус 54-soic-ep (54-pin soic with exposed pad)). Этот силовой прибор имеет выводы затвора, стока и истока. Для неполяризованных корпусов обратитесь к техническому описанию производителя для точной ориентации вывода 1 и деталей посадочного места. Типичные применения включают проектирование источников питания, управление двигателями и коммутацию нагрузки.
Нет подробных данных о распиновке для MCZ33905CD3EK.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
MCZ33905CD3EK подходит для 6 применениеs: Automotive Body Control Module (BCM), Central Gateway ECU, HVAC Control Module, Instrument Cluster, Industrial CAN/LIN Node, Seat / Mirror / Window-Lifter Module.
Automotive Body Control Module (BCM)
The MCZ33905CD3EK is purpose-built for automotive body control modules where it consolidates a 3.3V MCU supply, an ISO 11898-2/-5 HS-CAN transceiver, and two LIN 2.x slaves behind one chip. With a 5.5V to 28V battery input it tolerates 12V jump-start and load-dump transients without external protection, while the integrated 3.3V LDO feeds the host MCU directly. The exposed pad of the 54-SOIC-EP provides the ground and heatsinking path required for sustained body-electronics duty cycles.
Рекомендуется
Central Gateway ECU
In a central gateway ECU the MCZ33905CD3EK provides the HS-CAN physical layer for backbone communication between CAN sub-networks while the dual LIN channels bridge body-domain LIN clusters to the CAN backbone. The 3.3V LDO powers a 32-bit gateway MCU, and the wide 5.5V to 28V input range accepts direct battery feed in passenger and commercial vehicles. Its diagnostic coverage for local and bus failures supports the fail-safe behavior demanded by gateway architectures.
Рекомендуется
HVAC Control Module
The MCZ33905CD3EK fits HVAC modules that need to communicate on the vehicle CAN bus while driving multiple LIN-based flaps, blowers, and sensor nodes. Its dual LIN channels let a single SBC drive two independent LIN sub-nets, while the HS-CAN interface talks to the climate-control master on the chassis CAN bus. The integrated 3.3V regulator eliminates an external LDO and the -40C to +125C grade-1 rating supports cabin and engine-bay HVAC packaging.
Рекомендуется
Instrument Cluster
The MCZ33905CD3EK supports instrument clusters that receive drive data over HS-CAN and control tell-tales or backlighting through LIN. Its integrated 3.3V LDO powers the cluster MCU and display driver, while the wide supply tolerance covers cold-crank and load-dump events on the vehicle battery. The 54-SOIC-EP package is well-suited to the constrained PCB area behind the cluster bezel and offers the ground-return performance needed for EMC-sensitive display signals.
Рекомендуется
Industrial CAN/LIN Node
The MCZ33905CD3EK serves industrial controllers exposed to wide DC bus voltages from 5.5V to 28V and requiring both CAN and LIN connectivity in one footprint. The integrated HS-CAN and dual LIN make it suitable for factory automation I/O blocks, building automation panels, and agricultural machinery networks. The exposed pad of the SOIC-EP provides the thermal path for sustained 24V industrial operation.
Рекомендуется
Seat / Mirror / Window-Lifter Module
Body-domain LIN slave modules such as seat controllers, mirror adjusters, and window lifters benefit from the dual LIN channels and the HS-CAN connectivity of the MCZ33905CD3EK. The 3.3V LDO powers the local 8-bit or 32-bit LIN slave MCU, and the wide supply input covers 12V battery transients. The 54-SOIC-EP footprint allows straightforward placement in space-constrained door-module and seat-module PCBs.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MCZ33905CD3EK — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MCZ33903CD3EK | MCZ33904CD3EK | MCZ33905D3EK | MCZ33905CD3EKR2 |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 54-SOIC-EP | 54-SOIC-EP | 54-SOIC-EP | 54-SOIC-EP | 54-SOIC-EP |
| Supply Voltage | 5.5 V to 28 V | 5.5 V to 28 V | 5.5 V to 28 V | 5.5 V to 28 V | 5.5 V to 28 V |
| On-board MCU LDO | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| CAN Channels | 1 x HS-CAN (ISO 11898-2/-5) | 1 x HS-CAN | 1 x HS-CAN | 1 x HS-CAN | 1 x HS-CAN |
| LIN Channels | 2 | 1 | 2 (variant dependent) | 2 | 2 |
| Lifecycle Status | Obsolete (EOL) | Obsolete (EOL) | Obsolete (EOL) | Obsolete (EOL) | Obsolete (EOL) |
| Packing | Tube | Tube | Tube | Tube | Tape and Reel (R2) |
Ключевые отличия
- Dual LIN 2.x transceivers integrated alongside HS-CAN (против MCZ33903CD3EK)
- Second-generation SBC family with enhanced diagnostics (против MCZ33390EFR2)
- Wide 5.5V to 28V supply supports 24V truck networks (против Discrete LDO + CAN + LIN implementations)
Заметки по проектированию
Solder the exposed pad of the 54-SOIC-EP to a continuous ground copper pour of at least 1 square inch. The exposed pad carries both the thermal dissipation path and the low-impedance ground return required during automotive load-dump and jump-start events. Without proper pad soldering the device may overheat or fail EMC.
Place a reverse-battery protection diode or P-MOSFET on the Vbat pin, and add a load-dump clamp (TVS or active suppressor) sized to the absolute maximum battery rating. The MCZ33905CD3EK accepts 5.5V to 28V on Vbat, but transients above this range during alternator load-dump can exceed the absolute maximum if not clamped externally.
Keep the HS-CAN bus pins (CANH, CANL) routed as a differential pair with 120 ohm characteristic impedance and 100 nF bus-splitting capacitors as recommended by ISO 11898-2. Place the LIN bus pins close to the connector with ESD protection diodes rated to at least 8 kV HBM to survive handling and field transients.
Do not assume the MCZ33905CD3EK can drive the MCU I/O directly - the integrated 3.3V LDO is intended for MCU core supply, not high-current peripheral rails. Always check the LDO current capability against the MCU plus peripherals worst case, and add an external regulator if total load is above the SBC rating.
Информация о соответствии
AEC-Q100 qualification is typical for the MC33903/4/5 SBC family per NXP automotive-grade marketing; halogen-free status not stated in verified web data and left as unknown.
