MIC2103YML - 75V 15A Adaptive On-Time Buck Controller | Microchip
Артикул: MIC2103YML ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $2.1231 | $2,12 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
MIC2103YML Обзор
A synchronous buck controller is a pulse-width-modulation controller for a step-down DC-DC converter. It drives a high-side switching MOSFET and a low-side synchronous rectifier rather than dissipating conversion energy in a linear element. The controller supplies gate-drive and timing functions, while external MOSFETs, inductors, capacitors, and feedback components determine practical power capability and loop performance. In the system hierarchy, the MIC2103 belongs to DC-DC converters, switching regulators, power-management ICs, and semiconductors.
Key verified characteristics include a 75 V maximum supply, a 4.5 V minimum operating input, adjustable output down to 0.8 V, guaranteed output accuracy of ±1%, constant-frequency operation, adaptive on-time control, and a 200 kHz to 600 kHz programmable switching range. Hyper Light Load operation is identified by distributors and evaluation-board documentation. The controller supports up to 15 A output-current capability when paired with appropriately rated external power components; the IC itself does not carry 15 A continuously.
The adaptive on-time architecture adapts high-side conduction time to operating conditions while retaining constant-frequency behavior. This architecture targets efficient conversion across a wide input range and reduces reliance on a fixed compensation approach. The controller is particularly relevant where a 48 V or higher bus must be reduced efficiently and where converter size, transition behavior, and external power-stage selection are central engineering constraints.
Typical applications include telecom and networking power supplies, industrial 24 V or 48 V rails, server and data-center auxiliary supplies, instrumentation, and distributed power systems. The 75 V input rating provides design margin above common nominal 48 V buses, while the exposed thermal pad and compact 3x3 mm footprint support dense power-converter layouts.
Design starts with selecting external MOSFETs whose voltage ratings, gate charges, and losses support the target rail and switching frequency. Follow the manufacturer datasheet for compensation, bootstrap components, gate-drive settings, current-limit implementation, and exposed-pad layout. Estimated converter dissipation must be calculated from actual MOSFET, inductor, and controller losses because the verified data does not provide a complete thermal-resistance table.
This product page consolidates verified specifications, sourcing information, application guidance, and replacement limitations. No verified pin-compatible substitutes were established from the supplied cross-reference results, so the page avoids presenting unverified drop-in claims and distinguishes controller-only specifications from the external converter design.
Аналоги без доработки для MIC2103YML — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
MIC2104YML
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MIC2103YML Максимальные параметры и электрические характеристики
| Product Type | Synchronous step-down DC-DC buck controller |
| Control Architecture | Constant-frequency adaptive on-time control |
| Input Supply Range | 4.5 V to 75 V |
| Maximum Input Voltage | 75 V |
| Output Current Capability | Up to 15 A with suitable external power components |
| Adjustable Output Voltage | Down to 0.8 V |
| Output Voltage Accuracy | ±1% guaranteed |
| Switching Frequency Range | 200 kHz to 600 kHz programmable |
| PWM Output Count | 1 output |
| Control Scheme | Soft-switching PWM controller |
| Operating Mode | Synchronous buck operation |
| Load Feature | Hyper Light Load operation |
| Корпус | 16-pin VQFN, 3x3 mm, exposed pad |
| Тип монтажа | Surface mount |
| Shipping Package | Tape and reel |
Руководство по цоколевке MIC2103YML в корпусе tape and reel
Цоколевка для MIC2103YML (корпус tape and reel). Этот силовой прибор имеет выводы затвора, стока и истока. Для неполяризованных корпусов обратитесь к техническому описанию производителя для точной ориентации вывода 1 и деталей посадочного места. Типичные применения включают проектирование источников питания, управление двигателями и коммутацию нагрузки.
Нет подробных данных о распиновке для MIC2103YML.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
MIC2103YML подходит для 6 применениеs: 48 V Industrial DC-DC Supply, Telecom and Networking Power Rails, Server and Data-Center Auxiliary Supplies, Test and Instrumentation Power, Distributed Power Conversion, LED and High-Current Driver Stages.
48 V Industrial DC-DC Supply
The MIC2103YML fits 48 V industrial power systems because its verified input range is 4.5 V to 75 V, providing 27 V of headroom above a nominal 48 V bus. Adaptive on-time control and a programmable 200 kHz to 600 kHz switching range support conversion of that bus to lower-voltage rails. Use external MOSFETs with suitable voltage and gate-charge ratings, then validate transient response, efficiency, conducted emissions, and thermal rise against the completed converter rather than the controller alone.
Рекомендуется
Telecom and Networking Power Rails
The MIC2103YML is appropriate for telecom and networking converters that accept a wide industrial bus and produce a regulated lower voltage. Its 75 V rating, adjustable output down to 0.8 V, and ±1% guaranteed accuracy support precise rail generation, while the controller can be paired with external power stages for designs up to 15 A. Hyper Light Load behavior may improve light-load operation, but efficiency curves must be measured at the intended frequency, inductor, and output voltage.
Рекомендуется
Server and Data-Center Auxiliary Supplies
The MIC2103YML can control high-current auxiliary converters in server and data-center systems where the input bus may substantially exceed conventional low-voltage rails. The verified 4.5 V to 75 V range and capability to support 15 A output are useful for fan, controller, or intermediate rails. Its 16-VQFN 3x3 mm package supports compact placement, but high-current designs must provide copper paths, electrical and thermal isolation as required, and layout validation for switching-node dv/dt and EMI.
Рекомендуется
Test and Instrumentation Power
The MIC2103YML is suitable for laboratory and test-instrumentation rails where adjustable output, accurate regulation, and programmable switching frequency are useful. Its output can be set down to 0.8 V with ±1% guaranteed accuracy, while the 200 kHz to 600 kHz range allows the power stage, inductor, and output network to be tuned for the required dynamic performance. Designers should verify loop stability, load-transient response, output ripple, and start-up behavior across the intended line and load ranges.
Рекомендуется
Distributed Power Conversion
The MIC2103YML can serve as the PWM controller in a distributed power architecture that converts a wide local bus into one or more isolated or non-isolated intermediate rails. Its 75 V operating ceiling and adjustable output down to 0.8 V provide useful range, while the compact 16-VQFN package fits densely populated converter bricks. A production design must account for magnetics insulation, isolation ratings if applicable, loop compensation, startup sequencing, fault response, and agency requirements not specified in the supplied controller data.
Рекомендуется
LED and High-Current Driver Stages
The MIC2103YML can control a synchronous step-down stage that feeds constant-current LED regulators or other high-current loads. Its verified output-current capability of up to 15 A depends on external MOSFETs, magnetics, and layout, so it can supply the power stage rather than directly regulate LED current. The 4.5 V to 75 V input range is useful for varied input sources. Designers must set current limit correctly, account for inductor saturation, validate dimming behavior, and verify low-voltage and thermal performance.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MIC2103YML — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MIC2104YML |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 16-pin VQFN, 3x3 mm, exposed pad | 16-pin VQFN, 3x3 mm, exposed pad |
| Input Voltage Range | 4.5 V to 75 V | 4.5 V to 75 V as part of MIC2103/04 family |
| Control Architecture | Constant-frequency adaptive on-time | Constant-frequency adaptive on-time as part of MIC2103/04 family |
| Maximum Output Current Capability | Up to 15 A with suitable external components | Up to 15 A family-level capability with suitable external components |
| Output Voltage | Adjustable down to 0.8 V | Adjustable down to 0.8 V as part of MIC2103/04 family |
| Output Voltage Accuracy | ±1% guaranteed | ±1% guaranteed family-level specification |
| Switching Frequency | 200 kHz to 600 kHz programmable | 200 kHz to 600 kHz programmable family-level range |
| Switching Topology | Synchronous step-down buck controller | Synchronous step-down buck controller |
Ключевые отличия
- Wide input-voltage ceiling (против Generic low-voltage PWM controllers)
- High-current system scalability (против Integrated low-current regulator packages)
- Wide programmable switching range (против Single-frequency controller families)
- Compact exposed-pad footprint (против Larger controller packages)
Заметки по проектированию
Select the external high-side and low-side MOSFETs from the complete operating envelope rather than the nominal 48 V bus alone. The controller accepts up to 75 V, so voltage rating, transients, gate-drive level, on-resistance, output charge, and reverse-recovery behavior determine switching and conduction loss. Estimate: P_MOSFET equals conduction loss plus switching loss for each device, and P_conductor equals I_rms squared multiplied by resistance. These estimates require the actual frequency, duty cycle, junction temperature, and component data.
Use the exposed pad as part of the thermal design and follow the manufacturer's layout and solder-mask guidance. Estimated: converter temperature rise depends on total dissipated power and the assembled thermal resistance, neither of which was supplied in the verified data. Do not assume that a compact 3x3 mm controller can dissipate the converter's full output power; most loss occurs in external MOSFETs, the inductor, and the controller. Verify junction temperature, exposed-pad solder coverage, copper area, airflow, and adjacent heat sources.
Keep the high-side MOSFET, switching node, inductor, and input capacitor in a compact current-loop geometry to reduce parasitic inductance and switching-node ringing. Route gate-drive traces away from sensitive feedback nodes, use a continuous ground reference, and place compensation and feedback components according to the official datasheet. The controller's exposed pad must be soldered and connected to the required thermal and electrical plane. Validate ringing, EMI, and current sharing with a high-bandwidth probe and thermal camera.
Информация о соответствии
The supplied verified results identify Microchip's MIC2103 product page and evaluation-board documentation but do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. These fields remain unknown rather than inferred.
