MPC5200CVR266 - PowerPC G2_LE MPU 266MHz 272-BGA | NXP
Артикул: MPC5200CVR266 ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $49.2 | $49,20 |
| 10 | $45.8 | $458,00 |
| 100 | $41.5 | $4.150,00 |
| 500 | $38.2 | $19.100,00 |
| 1.000 | $34.9 | $34.900,00 |
MPC5200CVR266 Обзор
A PowerPC G2_LE MPU is a 32-bit embedded microprocessor based on the PowerPC instruction set architecture (ISA), descended from the original IBM POWER design. Within the broader semiconductor hierarchy, an MPU is a class of integrated circuit -> microprocessor -> 32-bit embedded processor -> PowerPC architecture. The 'LE' (Little Endian) variant specifically supports little-endian byte ordering, simplifying software porting from x86 or ARM code bases. The MPC52xx family was NXP/Freescale's mid-2000s effort to deliver integrated peripherals (ATA, USB, Ethernet, PCI, I2S, Fast Ethernet MAC) on a single PowerPC die, targeting industrial control, automotive infotainment, and printer/MFP applications.
Key features of the MPC5200CVR266 include BestComm DMA engine for high-throughput peripheral transfers, dual CAN 2.0B interfaces, USB 1.1 host/device, ATA/IDE interface, 10/100 Mbit Ethernet MAC, PCI 2.2 interface, I2S audio ports, and a 16-bit DDR memory controller. The device typically pairs with 8-256 MB DDR SDRAM and boots from a 16-bit boot ROM or serial flash via its integrated SPI/I2C boot controllers.
Typical applications include industrial automation controllers, human-machine interface (HMI) panels, point-of-sale terminals, networked printers, automotive infotainment head units, and legacy PowerPC-based embedded systems. The integrated peripherals eliminate the need for companion bridge chips, reducing BOM and PCB complexity.
When designing with the MPC5200CVR266, carefully plan DDR memory trace lengths (matched within +/- 50 mils) and ensure adequate thermal relief on the 27x27 mm BGA. Reference the BestComm programmer's manual for DMA task setup - incorrectly configured BestComm microcode is the most common cause of peripheral lockups on this family.
This page synthesizes current distributor inventory, lifecycle status, parameter data, and pin-compatible alternatives not consolidated on a single NXP or distributor page.
Аналоги без доработки для MPC5200CVR266 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MPC5200CVR266 (тот же форм-фактор и посадочное место) — отличается по Core Architecture, Series.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
MPC5200CVR400B
✅ Прямая замена✓ В наличии
$24.8 / шт.
Открыть даташит →MPC5200CVR400B
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$24.8 / шт.
Открыть даташит →MPC5200CVR266B
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
MPC5200CVR266 Максимальные параметры и электрические характеристики
| Manufacturer | NXP Semiconductors (formerly Freescale Semiconductor) |
| Series | MPC52xx |
| Core Architecture | PowerPC G2_LE |
| Number of Cores | 1 |
| Разрядность шины данных | 32-bit |
| Maximum Clock Speed | 266 MHz |
| Корпус | 272-PBGA (27x27 mm) |
| Тип монтажа | Surface Mount |
| Рабочая температура | -40C to +85C (industrial, 'CVR' suffix) |
| Lead-Free / Pb-Free | Yes (CVR suffix indicates no-lead) |
| Instruction Set | PowerPC |
| Endianness | Little Endian (LE) |
| On-Chip Peripherals | BestComm DMA, Dual CAN 2.0B, USB 1.1, ATA/IDE, 10/100 Ethernet MAC, PCI 2.2, I2S, I2C, SPI |
| Memory Interface | 16-bit DDR SDRAM controller |
| Статус жизненного цикла | Obsolete / End of Life (per GlobalSpec listing) |
| Packaging | Tray |
Руководство по цоколевке MPC5200CVR266 в корпусе 272-pbga (27x27 mm)
Цоколевка для MPC5200CVR266 (корпус 272-pbga (27x27 mm)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для MPC5200CVR266.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
MPC5200CVR266 подходит для 6 применениеs: Industrial Automation Controllers, Human-Machine Interface (HMI) Panels, Automotive Infotainment Head Units, Networked Printers and MFPs, Point-of-Sale (POS) Terminals, Legacy PowerPC Embedded Systems.
Industrial Automation Controllers
The MPC5200CVR266's 266 MHz PowerPC G2_LE core, dual CAN 2.0B interfaces, and industrial -40C to +85C temperature rating make it well-suited for PLC and motion controller applications. The integrated BestComm DMA engine offloads high-throughput fieldbus communication (CANopen, DeviceNet) from the CPU, while the PCI 2.2 interface can connect to industrial I/O expansion modules. Unlike ARM Cortex-M parts, the PowerPC core provides deterministic interrupt latency needed for real-time control loops, and the large 272-BGA package supports the high pin count required for parallel industrial I/O. Typical designs pair the MPC5200CVR266 with DDR SDRAM, 16-bit boot flash, and CAN transceivers for a complete PLC main board.
Рекомендуется
Human-Machine Interface (HMI) Panels
The MPC5200CVR266's integrated LCD controller, I2S audio, and 10/100 Ethernet MAC support full-featured HMI panel designs without companion bridge chips. The 266 MHz core is sufficient to drive QVGA/WQVGA TFT displays at 30+ fps while running a Linux or VxWorks GUI stack. The BestComm DMA engine can stream I2S audio to external codecs for voice prompts. Compared with newer i.MX parts, the MPC5200CVR266 offers mature mainline Linux support but consumes more power. Typical HMI designs use the PCI bus to connect a graphics controller card, with DDR memory shared between CPU and frame buffer.
Рекомендуется
Automotive Infotainment Head Units
Although superseded by ARM-based i.MX parts, the MPC5200CVR266 was historically used in mid-2000s automotive infotainment head units thanks to its integrated I2S, ATA (for HDD-based media storage), USB host (for iPod/USB stick connectivity), and PCI expansion. The 266 MHz PowerPC core decoded MP3/WMA audio in software while the BestComm DMA streamed decoded PCM to the I2S codec. The wide temperature range ('CVR' suffix) supported in-cabin environments. For new automotive designs, NXP recommends migrating to i.MX6/i.MX8 with Hypervisor support, but existing MPC5200-based units are still serviced in the aftermarket.
Рекомендуется
Networked Printers and MFPs
The MPC5200CVR266 was a popular choice for networked laser printers and multifunction peripherals (MFPs) in the 2005-2012 timeframe. The integrated 10/100 Ethernet MAC, PCI expansion (for scanner modules), USB host/device (for print job transfer), and ATA interface (for the print engine HDD) eliminated external bridge chips. The BestComm DMA engine handled high-bandwidth scanner-to-memory transfers at 30+ pages per minute. The 266 MHz core ran PostScript and PCL interpreters in real time. Modern replacements include the i.MX6ULL or i.MX7D for entry-level printers.
Рекомендуется
Point-of-Sale (POS) Terminals
The MPC5200CVR266's combination of dual CAN (for peripherals like barcode readers), USB host (for receipt printers and cash drawers), 10/100 Ethernet (for store-LAN backhaul), and PCI (for touchscreen controllers) made it a popular POS terminal SoC. The 32-bit PowerPC G2_LE core ran hardened embedded Linux with multi-tasking GUI, while the BestComm DMA ensured USB peripheral traffic did not stall the application. Industrial temperature rating suited the harsh environments of fast-food and retail counters. Compared to newer ARM parts, the MPC5200CVR266's high BOM cost is the main reason it has been retired from new POS designs.
Рекомендуется
Legacy PowerPC Embedded Systems
The MPC5200CVR266 remains in service across many legacy embedded systems where PowerPC code bases (VxWorks, Green Hills, custom RTOSes) cannot be easily ported to ARM. Long-lifecycle programs in defense, industrial automation, and medical equipment continue to source the MPC5200CVR266 from remaining distributor stock and authorized brokers. The mature U-Boot and mainline Linux support simplifies long-term maintenance. Engineers designing replacement boards for legacy systems can drop the MPC5200CVR266 into existing 272-BGA footprints as a last-time-buy solution while parallel-porting software to a future ARM-based platform.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MPC5200CVR266 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MPC5200CVR400B | MPC5200CVR400 | MPC5200CVR266B |
|---|---|---|---|---|
| Package | 272-BGA (PBGA, 27x27 mm) | 272-BGA (PBGA, 27x27 mm) - same | 272-BGA (PBGA, 27x27 mm) - same | 272-BGA (PBGA, 27x27 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors - same | NXP Semiconductors - same | NXP Semiconductors - same |
| CPU Clock Speed | 266 MHz | 400 MHz | 400 MHz | 266 MHz |
| Core Architecture | PowerPC G2_LE | PowerPC G2_LE | PowerPC G2_LE | PowerPC G2_LE |
| Silicon Revision | Original ('A') | 'B' (with errata fixes) | Original ('A') | 'B' (with errata fixes) |
| Operating Temperature | -40C to +85C (industrial) | -40C to +85C (industrial) | -40C to +85C (industrial) | -40C to +85C (industrial) |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete |
| Integrated Peripherals | Dual CAN, USB, ATA, Ethernet, PCI, I2S, BestComm DMA | Identical | Identical | Identical |
Ключевые отличия
- Highest clock speed at same package in MPC5200 family (против MPC5200CVR266B)
- Industrial temperature rating vs commercial (против MPC5200CVM266 (commercial variant))
- BestComm programmable DMA engine (против Generic ARM Cortex-A SoCs without dedicated DMA)
Заметки по проектированию
The 272-BGA package (27x27 mm, 1.27 mm pitch) requires an 8-layer or 10-layer PCB with via-in-pad or dog-bone fanout. The BGA ball grid is 17x17 (with corner balls depopulated); escape routing for inner rows needs microvias or staggered via fanout. Reference NXP application note AN3357 for the recommended stackup. Power plane integrity under the BGA is mandatory - split grounds cause BestComm DMA timing jitter and CAN bus error frames.
BestComm DMA timing is reference-clock-derived; a noisy 33 MHz PCI clock or unstable DDR clock will cause BestComm task misfires. Place a guard ring around the 33 MHz oscillator and series-terminate the clock trace at 33 ohm. For DDR memory, all data/strobe traces must be length-matched within +/- 50 mils and routed on an inner stripline layer with continuous ground reference planes above and below. Estimated: a 2-inch length mismatch at 266 MHz DDR introduces ~0.5 ns skew which exceeds the tDQSS setup window.
Most MPC5200CVR266 design failures are caused by incorrect BestComm DMA task setup rather than silicon issues. The BestComm engine requires microcode loaded into its internal RAM; if the task descriptor pointers are misconfigured, the DMA engine will silently hang without raising an interrupt. Always initialize BestComm tasks in this order: (1) clear task control register, (2) load microcode, (3) set task enable bit. Use the NXP BestComm task library instead of writing task descriptors from scratch - manual tasks frequently violate the engine's instruction fetch timing.
The 272-BGA package has a theta_JA of approximately 15 C/W with a standard JEDEC 4-layer test board. At 266 MHz full load, the MPC5200CVR266 dissipates roughly 1.5-2.0 W depending on peripheral activity. For industrial -40C to +85C designs at 85C ambient with full peripheral loading, junction temperature can approach 115C, leaving minimal margin. Add thermal vias under the BGA thermal pad area and connect to inner ground planes for heatsinking; do not rely on convection alone in enclosed industrial enclosures.
Place the DDR SDRAM chips as close as possible to the MPC5200CVR266 to minimize DDR trace length. The DDR address/command traces should be routed on a dedicated inner layer with a 50-ohm controlled impedance and referenced to a clean ground plane. Keep DDR clocks short (< 1.5 inches) and guard-band them with ground traces. The ATA interface is highly noise-sensitive; route ATA cables and traces away from switching power converters and use shielded cables for off-board ATA connections.
Информация о соответствии
Lead-Free per 'CVR' suffix indicating no-lead BGA. GlobalSpec cross-reference listing indicates Halogen Free: Not Compliant. RoHS/REACH compliance status not confirmed by NXP material declaration in provided web data - marked unknown pending verification. AEC-Q100 not applicable for industrial-temperature PowerPC MPU; for automotive-grade equivalent consult NXP automotive product line.