MPC8343VRAGDB - PowerQUICC II Pro 400MHz e300 SoC | NXP
Артикул: MPC8343VRAGDB ⚠ Последняя закупка| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $38.5 | $38,50 |
| 10 | $34.2 | $342,00 |
| 100 | $28.95 | $2.895,00 |
| 250 | $25.1 | $6.275,00 |
| 500 | $22.4 | $11.200,00 |
MPC8343VRAGDB Обзор
A PowerQUICC II Pro processor is a member of the communications processor family that combines a PowerPC CPU core with dedicated communications peripherals in a single SoC. In the broader taxonomy, it sits within microprocessors (MPU) -> embedded processors -> SoC -> communications processors, bridging general-purpose computing and high-throughput wired networking workloads. This integration makes PowerQUICC II Pro a foundational platform for legacy and current-generation networking equipment where deterministic throughput, peripheral integration, and long-life-cycle support outweigh the raw compute density of newer ARM Cortex-A SoCs.
Key features of the MPC8343VRAGDB include the e300 core with 32 KB L1 instruction and data caches, on-chip DDR1/DDR2 memory controller supporting up to 333 MHz operation, three 10/100/1000 Mbps Ethernet MACs, two PCI interfaces (one 32-bit/66 MHz and one 32-bit/33 MHz), USB 2.0 host/device, integrated security engine, and a 16-bit local bus. The part is rated for 0C to 105C ambient operation (commercial extended grade) and ships in a RoHS-compliant 620-pin HCTE BGA.
The architecture is implemented in a 0.13 micron CMOS process, supplying the core with 1.2 V (with 1.8 V, 2.5 V, and 3.3 V I/O domains). This multi-rail design lets the SoC interface directly to legacy 3.3 V peripherals while keeping the core at low voltage for reduced power consumption. The integrated QUICC Engine communications block handles ATM, PPP, HDLC, and Ethernet protocol termination, offloading these tasks from the e300 core.
Typical applications include industrial routers and gateways, broadband access equipment, wireless LAN controllers, network-attached storage (NAS) controllers, secure VPN appliances, and factory-automation controllers. The combination of dual GbE, dual PCI, USB 2.0, and the QUICC Engine allows a single MPC8343 to replace multi-chip router designs.
When designing with this device, allocate at least four PCB layers for the HCTE BGA breakout, and follow NXP AN3361 power-supply sequencing guidelines to avoid latch-up. The 620-ball HCTE BGA is a complex substrate; reference the NXP MPC8343E Design Checklist for thermal, decoupling, and trace-length requirements.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone. Engineers sourcing long-life-cycle MPU platforms should review the same-package options below for inventory continuity.
Аналоги без доработки для MPC8343VRAGDB — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MPC8343VRAGDB (тот же форм-фактор и посадочное место) — отличается по RoHS Status, Ethernet, Operating Temperature, Package, USB.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
MPC8343EVRAGDB
✅ Прямая замена✓ В наличии
$41 / шт.
Открыть даташит →MPC8343CZQAGDB
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MPC8343VRAGD
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MPC8343VRAGDB Максимальные параметры и электрические характеристики
| Core Processor | PowerPC e300 |
| Number of Cores | 1 |
| Разрядность шины данных | 32-Bit |
| Core Frequency | 400 MHz |
| Co-Processor / DSP | QUICC Engine (Communications) |
| RAM Controllers | DDR1, DDR2 |
| Ethernet | 10/100/1000 Mbps x3 |
| USB | USB 2.0 (Hi-Speed) Host/Device |
| PCI | 2 x PCI (one 32-bit/66 MHz, one 32-bit/33 MHz) |
| Graphics Acceleration | No |
| Рабочая температура | 0C to +105C |
| Supply Voltage - Core | 1.2 V |
| Supply Voltage - I/O | 1.8 V / 2.5 V / 3.3 V |
| Корпус | 620-HBGA (29 x 29 mm, HCTE) |
| Тип монтажа | Surface Mount |
| Статус RoHS | Compliant (Lead-Free) |
| Security | Integrated Security Engine |
| Local Bus | 16-bit |
Конфигурация выводов MPC8343VRAGDB
| Контакт A1 | VDD — Core supply (1.2 V) |
| Контакт B14 | GND — Ground reference |
| Контакт AE3 | DDR_DQ0 — DDR2 data lane 0 |
| Контакт AH12 | TSEC1_TXD[0] — Triple-speed Ethernet MAC 1 transmit data 0 |
| Контакт AJ25 | PCI1_AD[31] — PCI bus 1 address/data bit 31 |
| Контакт W2 | USB_DP — USB 2.0 data plus |
| Контакт AC29 | LB_DAT[15] — 16-bit local bus data bit 15 |
Типичное применение
MPC8343VRAGDB подходит для 6 применениеs: Industrial Router and Gateway, Broadband Access Equipment (CPE), Network-Attached Storage (NAS) Controller, Wireless LAN Access Point Controller, Secure VPN Appliance, Factory Automation Controller.
Industrial Router and Gateway
The MPC8343VRAGDB's triple 10/100/1000 Mbps Ethernet MACs and dual PCI controllers make it a natural fit for managed-gateway routers that aggregate DSL, fiber, or cellular WAN links. The QUICC Engine offloads PPPoE, IPsec, and HDLC frame termination from the e300 core, sustaining wire-speed forwarding across WAN uplinks while the host CPU handles routing-table lookups and management-plane tasks. With 400 MHz of compute and DDR2 memory bandwidth, the part maintains low-latency packet processing even under load.
Рекомендуется
Broadband Access Equipment (CPE)
The MPC8343VRAGDB integrates everything needed for a customer-premises broadband device: an e300 core for control-plane processing, DDR2 controller for system memory, dual GbE for LAN/WAN separation, and Hi-Speed USB 2.0 for downstream peripherals. This single-chip integration reduces BOM cost versus discrete CPU-plus-switch architectures. The QUICC Engine accelerates PPP, ATM, and Ethernet protocol termination required by legacy DSL and GPON CPE designs, and the 0 to 105C operating range supports sealed outdoor enclosures.
Рекомендуется
Network-Attached Storage (NAS) Controller
The MPC8343VRAGDB's combination of dual GbE, dual PCI, and USB 2.0 is well matched to small-form-factor NAS controllers that need to attach SATA disks via a PCI-hosted RAID HBA and serve clients over Ethernet. The 400 MHz e300 core plus DDR2 memory bandwidth sustains typical SMB/NFS read workloads, while the 16-bit local bus simplifies glue-less connection to NAND flash for boot. Industrial-rated 0 to 105C operation supports always-on storage appliances in non-conditioned spaces.
Рекомендуется
Wireless LAN Access Point Controller
The MPC8343VRAGDB is commonly paired with an 802.11 MAC/BB over PCI to form a managed WLAN access point. The SoC handles 802.1X authentication, RADIUS client, and CAPWAP tunneling through the QUICC Engine while the host CPU runs the management stack. Dual GbE ports allow a dedicated wired uplink and a wired mesh backhaul, and USB 2.0 enables an external 3G/4G modem for failover in branch-office deployments. The industrial temperature range supports ceiling-mounted AP enclosures.
Рекомендуется
Secure VPN Appliance
For IPsec and SSL VPN headends, the MPC8343VRAGDB with the optional E-variant security engine (SEC 2.0) accelerates AES, 3DES, SHA-1, and MD5 in hardware, sustaining 100 Mbps of IPsec throughput at line rate. The QUICC Engine further accelerates the underlying packet processing so encryption does not become the bottleneck. The 620-ball HCTE BGA exposes the full peripheral set, allowing appliance designers to reuse the same PCB across both encrypted and non-encrypted SKUs.
Рекомендуется
Factory Automation Controller
The MPC8343VRAGDB's industrial 0 to 105C temperature grade and long-life-cycle supply make it suitable for factory-floor controllers that aggregate PLC, HMI, and SCADA traffic over Ethernet and fieldbuses. Dual PCI slots can host PROFIBUS or EtherCAT master cards, while the QUICC Engine handles deterministic protocol termination in parallel with the e300 core running the real-time control stack. The integrated USB 2.0 supports local configuration laptops, and the DDR2 controller handles the deterministic memory access needed for closed-loop control.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MPC8343VRAGDB — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MPC8343EVRAGDB | MPC8343CZQAGDB | MPC8343VRAGD |
|---|---|---|---|---|
| Package | 620-HBGA (29x29 mm, HCTE) | 620-HBGA (29x29 mm, HCTE) - same | 620-HBGA (29x29 mm, HCTE) - same | 620-HBGA (29x29 mm, HCTE) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core / Frequency | e300 / 400 MHz | e300 / 400 MHz | e300 / 400 MHz | e300 / 400 MHz |
| DDR Memory Controller | DDR1/DDR2 up to 333 MHz | DDR1/DDR2 up to 333 MHz | DDR1/DDR2 up to 333 MHz | DDR1/DDR2 up to 333 MHz |
| Ethernet MACs | 3 x 10/100/1000 Mbps | 3 x 10/100/1000 Mbps | 3 x 10/100/1000 Mbps | 3 x 10/100/1000 Mbps |
| PCI Interfaces | 2 x PCI (32-bit/66 MHz + 32-bit/33 MHz) | 2 x PCI (same) | 2 x PCI (same) | 2 x PCI (same) |
| USB 2.0 | Yes (Host/Device) | Yes (Host/Device) | Yes (Host/Device) | Yes (Host/Device) |
| Security Engine | Not integrated (non-E variant) | SEC 2.0 integrated | SEC 2.0 integrated | Not integrated |
| Operating Temperature | 0C to +105C | 0C to +105C | 0C to +105C | 0C to +105C |
| Lifecycle Status | Last Time Buy | Last Time Buy | Last Time Buy | Last Time Buy |
Ключевые отличия
- Single-chip triple GbE plus dual PCI plus USB 2.0 (против MPC8343CZQAGDB)
- QUICC Engine hardware protocol offload (против Discrete CPU plus software stack)
- Same-package drop-in variants across the family (против Competing SoCs requiring new layout)
Заметки по проектированию
Estimated: The 620-ball HCTE BGA at 1 mm pitch requires a minimum 4-layer PCB with 0.2 mm via-in-pad or dog-bone fan-out. Microvia (laser-drilled) stackups on 0.4 mm pitch escape are recommended for inner-row balls; reference the NXP MPC8343EA design checklist for via pattern. Allocate continuous GND planes on layers 2 and 4 to provide a low-impedance return path for the DDR2 and GbE signals, which carry the highest di/dt in the design.
The MPC8343VRAGDB requires four independent supply rails - 1.2 V core, 1.8 V/2.5 V/3.3 V I/O, plus the DDR2 termination voltage VTT. Per NXP AN3361, the 1.2 V core must reach 70 percent of nominal before the I/O rails; failure to sequence properly can trigger latch-up. Place a 22 uF bulk capacitor plus four 0.1 uF ceramics within 5 mm of the BGA, and use a dedicated LDO (not a switching converter) for the VTT rail to keep DDR2 signal integrity within JEDEC tolerances.
Estimated: At maximum throughput with all three GbE ports active and the QUICC Engine running full-duplex, the MPC8343VRAGDB dissipates approximately 3.5 to 4.0 W. The 29 x 29 mm HCTE BGA has a typical theta-JA of about 12 C/W with a 4-layer JEDEC JESD51 test board, giving a junction-to-ambient rise of roughly 45 to 50 C. Mounting on a sealed enclosure requires thermal vias under the central ball grid and an exposed copper pad on the top side; consult the NXP thermal model for production designs.
Do not migrate firmware from the MPC8343E (with security engine) to the non-E MPC8343VRAGDB without auditing crypto library calls; the SEC 2.0 device handles AES/SHA offload and the Linux kernel drops the corresponding driver. Also, the DDR2 controller must be configured for the exact speed grade of the chosen DIMM (266 vs 333 MHz), and unmatched write leveling causes intermittent data corruption that is hard to diagnose post-deployment.
Route the three GMII/RGMII Ethernet groups as 50 ohm single-ended traces, length-matched within 50 mils of each other within a port, and isolated from the DDR2 bus by at least 3W spacing. The two PCI buses should each be routed on a single inner layer with reference plane to keep the 66 MHz edge rates clean; the 32-bit/66 MHz PCI segment is the more demanding of the two and should take priority for signal-integrity optimization.
Информация о соответствии
RoHS compliant per NXP product page. Lead-free (Pb-free) HCTE BGA finish per part number G-suffix. AEC-Q100 not applicable - this is an MPU, not an automotive-grade IC. Halogen-free status not explicitly stated in the verified data; recommend checking NXP material declaration for confirmation.
