MPC8533EVTAQGA - PowerQUICC III 1GHz SoC, 783-FCBGA | NXP
Артикул: MPC8533EVTAQGA ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $58.39 | $58,39 |
| 10 | $52.55 | $525,50 |
| 100 | $47.3 | $4.730,00 |
| 500 | $42.85 | $21.425,00 |
| 1.000 | $38.5 | $38.500,00 |
MPC8533EVTAQGA Обзор
A PowerQUICC III communications processor is a system-on-chip (SoC) optimized for wired networking and telecommunications equipment, combining a high-performance PowerPC core with dedicated peripheral engines for packet processing, security acceleration, and memory I/O. Within the broader taxonomy, it sits as a specialized microprocessor / MPU -> embedded processor -> SoC -> semiconductor. PowerQUICC devices historically served telecom backplane and mid-range router markets where deterministic packet handling, multi-protocol support, and integrated PHYs/SerDes reduce board complexity.
Key features include a 32-bit PowerPC e500v2 dual-issue superscalar core with 7-stage pipeline, on-chip 36-bit DDR1/DDR2 memory controller supporting ECC, three 10/100/1000 Mb/s Ethernet MACs, two PCI Express interfaces plus one PCI 32-bit/66 MHz interface, USB 2.0 host/device, integrated security engine (SEC 2.0) for IPSec, SSL, and SRTP, and four I2C/SPI/UART peripheral controllers. The device targets throughput-sensitive workloads with hardware packet classification and queue management.
The architecture uses a multi-layer coherence fabric connecting the e500 core, L1/L2 caches, DDR controller, and peripheral bridges. A dedicated security accelerator offloads encryption from the core, freeing CPU cycles for control-plane and forwarding tasks. The 783-FCBGA package provides high-density interconnect for memory and SerDes signals while maintaining a 29x29 mm footprint.
Typical applications include enterprise routers, managed Layer 2/3 switches, multi-service access platforms, DSLAM line cards, wireless base station controllers, and industrial networking gateways. The integrated security engine also suits VPN concentrators and IPsec-accelerated firewalls.
When designing with this device, ensure proper power sequencing (core and I/O rails with specific ramp rates) and provide a four-layer PCB minimum to maintain signal integrity on the 1.25 GHz DDR2 interface. JTAG debug access must be brought out to a header for production boundary-scan and code development.
This page synthesizes distributor pricing, NXP same-family drop-in alternatives, and practical board-level design notes not found in the manufacturer datasheet alone.
Аналоги без доработки для MPC8533EVTAQGA — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MPC8533EVTAQGA (тот же форм-фактор и посадочное место) — отличается по Data Bus Width, Mounting Type.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
Для этого товара нет аналогов без доработки.
Запросить аналогиMPC8533EVTAQGA Максимальные параметры и электрические характеристики
| Family | PowerQUICC III |
| Core Architecture | PowerPC e500v2 |
| Core Count | 1 |
| Разрядность шины данных | 32-bit |
| Maximum Core Frequency | 1.0 GHz |
| L1 Cache | 32 KB I-cache + 32 KB D-cache |
| L2 Cache | 256 KB (per core, on-chip) |
| Memory Controller | DDR1/DDR2 with ECC |
| Ethernet | 3x 10/100/1000 Mb/s MAC (1 GbE) |
| PCI Express | 2x PCIe interfaces |
| PCI | 1x PCI 32-bit/66 MHz |
| USB | USB 2.0 (host/device) |
| Security Engine | SEC 2.0 (IPSec/SSL/SRTP) |
| Рабочая температура | 0C to +90C (commercial) |
| Корпус | 783-FCPBGA (29x29 mm) |
| Silicon Revision | Rev 2.1 |
| Тип монтажа | Surface Mount |
| Статус RoHS | Compliant |
Руководство по цоколевке MPC8533EVTAQGA в корпусе 783-fcpbga (29x29 mm)
Цоколевка для MPC8533EVTAQGA (корпус 783-fcpbga (29x29 mm)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для MPC8533EVTAQGA.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
MPC8533EVTAQGA подходит для 6 применениеs: Enterprise Router Platform, Managed Layer 2/3 Switch, Multi-Service Access Platform / DSLAM Line Card, Wireless Base Station Controller, VPN Concentrator and IPsec Appliance, Industrial Networking Gateway.
Enterprise Router Platform
The MPC8533EVTAQGA is well matched to enterprise router designs where a 1.0 GHz PowerPC e500v2 core, integrated three-port 1 GbE MACs, and dual PCI Express interfaces handle control-plane and forwarding tasks at line rate. The SEC 2.0 engine offloads IPSec and SSL encryption for VPN tunnels, reducing CPU utilization on the routing engine. Its DDR1/DDR2 controller with ECC supports up to 1.25 GHz memory bandwidth, sufficient for routing tables and packet buffers. Combined with the 783-FCPBGA (29x29 mm) package and commercial 0 to 90C range, the part fits mid-range branch-office and aggregation routers that must sustain encrypted traffic without an external crypto ASIC.
Рекомендуется
Managed Layer 2/3 Switch
For managed Layer 2/3 switches, the MPC8533EVTAQGA delivers an integrated switching control plane on a single chip. The three GbE MACs pair with external PHY transceivers for copper/fiber uplink ports, while the dual PCIe links connect to downstream switch ASICs or line cards. The USB 2.0 and PCI interfaces support management interfaces, console ports, and out-of-band management. Hardware queue management and the on-chip L2 cache accelerate ACL lookups and forwarding table updates at gigabit speeds, enabling wire-speed management-plane throughput on densely populated Layer 3 switches.
Рекомендуется
Multi-Service Access Platform / DSLAM Line Card
The MPC8533EVTAQGA suits multi-service access platforms and DSLAM line cards that aggregate DSL, Ethernet, and VoIP bearers onto an uplink. The e500v2 core runs access control and subscriber management stacks while the SEC 2.0 engine terminates per-subscriber IPSec tunnels, freeing the core for QoS scheduling. DDR2 with ECC handles large connection-tracking tables, and the integrated three GbE MACs connect to uplink aggregation. The compact 783-FCPBGA footprint fits the dense line-card form factor typical of central-office DSLAM shelves.
Рекомендуется
Wireless Base Station Controller
Wireless base station controllers benefit from the MPC8533EVTAQGA's 1 GHz processing throughput, integrated GbE, and hardware security engine. The device handles baseband control, mobility management, and backhaul encryption in a single SoC, reducing board area and power budget. PCI Express interfaces connect to baseband modem ASICs or radio cards, while the USB 2.0 and PCI ports support local management and configuration. Commercial 0 to 90C operation covers temperature-controlled indoor base-station cabinets.
Рекомендуется
VPN Concentrator and IPsec Appliance
The MPC8533EVTAQGA is an ideal host CPU for VPN concentrators and IPsec-accelerated firewalls. Its SEC 2.0 engine performs DES, 3DES, AES, SHA-1/2, and IPSec/SSL operations in hardware, sustaining multi-gigabit encrypted throughput without burdening the e500v2 core. DDR2 with ECC supports large session tables and SA caches, while the integrated GbE MACs connect directly to WAN/LAN PHYs. The single-SoC bill of materials reduces both BOM cost and PCB area versus discrete CPU-plus-crypto-ASIC designs.
Рекомендуется
Industrial Networking Gateway
Industrial networking gateways use the MPC8533EVTAQGA as a protocol-conversion and security hub between factory-floor networks and enterprise IT. The three GbE MACs, dual PCIe, USB 2.0, and PCI interfaces support copper/fiber uplinks plus local HMI or storage links. Hardware encryption secures OT-to-IT traffic, while the DDR2 controller handles protocol translation buffers. The 0 to 90C commercial operating range covers indoor industrial enclosures such as control cabinets and DIN-rail gateways.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MPC8533EVTAQGA — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MPC8533EVJAQGA | MPC8536EAVTAQG | MPC8548VTAQGB | MPC8548EPXAQGB |
|---|---|---|---|---|---|
| Package | 783-FCPBGA (29x29 mm) | 783-FCPBGA (29x29 mm) - same | 783-FCPBGA (29x29 mm) - same | 783-FCPBGA (29x29 mm) - same | 783-FCPBGA (29x29 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Architecture | PowerPC e500v2 | PowerPC e500v2 | PowerPC e500v2 | PowerPC e500v2 | PowerPC e500v2 |
| DDR Memory Support | DDR1/DDR2 with ECC | DDR1/DDR2 with ECC | DDR1/DDR2 with ECC | DDR1/DDR2 with ECC | DDR1/DDR2 with ECC |
| Ethernet | 3x 1 GbE MAC | 3x 1 GbE MAC | 3x 1 GbE MAC | Up to 4x GbE | Up to 4x GbE |
| PCI Express | 2x PCIe | 2x PCIe | 2x PCIe | 2x PCIe | 2x PCIe |
Ключевые отличия
- Highest-frequency tier in the MPC8533E line at 1.0 GHz (против MPC8533EVJAQGA)
- Lower cost than higher-tier PowerQUICC III siblings (против MPC8548VTAQGB)
- Hardware security engine integrated on-die (против MPC852TVR100A)
Заметки по проектированию
The MPC8533EVTAQGA requires multiple separate supply rails for core, DDR I/O, SerDes, and standard I/O with strict sequencing and ramp-rate requirements. Per NXP's hardware specifications, the core rail must reach its target voltage before or simultaneously with the I/O rails, and the PORESET signal must remain asserted until all rails are stable. Designers should use a multi-rail PMIC or discrete LDO/DC-DC controllers that support the sequencing window specified in the datasheet, and must place bulk and decoupling capacitors within the recommended distance of each BGA ball group.
Use a minimum four-layer PCB with dedicated power and ground planes for the 783-FCPBGA. Microvia-in-pad or via-on-pad technology is recommended for the BGA breakout to maintain signal integrity on the 1.25 GHz DDR2 interface. Match impedance for DDR traces per the NXP design checklist (typically 50 ohm single-ended, 100 ohm differential for PCIe), and length-match DDR address/command/clock traces within the byte-lane skew budget. Avoid routing high-speed signals across plane splits to prevent return-path discontinuities.
Although the 783-FCBGA exposes its die through the package top, the primary thermal path is into the PCB through the solder balls. Estimate: at full 1 GHz operation with all peripherals active, the SoC can dissipate between 5 W and 12 W depending on workload; design a copper flood directly under the BGA with thermal vias to the opposite side of the board. For enclosed chassis, provide forced-air cooling or a heat-sink attachment to maintain junction temperature below the recommended 105C limit.
Do not assume 1.0 GHz operation across all MPC8533E ordering codes - the speed grade is encoded in the part number (TA, JA, etc.) and must match the design's clocking and thermal budget. Always confirm the silicon revision (Rev 2.1 or later) to ensure the latest errata are addressed, and register with NXP to download the full errata document under NDA. JTAG signals (TCK, TMS, TDI, TDO, TRST) must be brought to a debug header for boundary-scan and code development.
Информация о соответствии
RoHS and REACH compliance per NXP product page. AEC-Q100 not applicable for networking SoC. Lead-free reflow compatible per JEDEC J-STD-020.