MPC8536EAVTAQG - PowerQUICC III 1GHz e500 MPU | NXP/Freescale
Артикул: MPC8536EAVTAQG ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $285 | $285,00 |
| 10 | $268.5 | $2.685,00 |
| 100 | $247.2 | $24.720,00 |
| 250 | $232 | $58.000,00 |
| 500 | $218.75 | $109.375,00 |
MPC8536EAVTAQG Обзор
A microprocessor (MPU) is a single-chip CPU that integrates fetch/decode/execute datapath, caches, memory management, and peripheral interfaces. The MPC8536E sits within the broader taxonomy: MPU -> microprocessor -> processor -> integrated circuit -> semiconductor. PowerQUICC III is NXP/Freescale's communications-processor family that traditionally combines an e500 host core with QUICC Engine datapath acceleration for networking protocols.
Key features include a 32-bit e500 core with up to 1.0 GHz frequency, integrated security (the 'E' suffix denotes encryption-enabled silicon), high-speed serial interfaces, DDR memory controller, and the on-chip QUICC Engine block optimized for packet processing. The 783-FCPBGA package provides the high-pin-count interconnect needed for multiple Gigabit Ethernet MACs, PCI Express, and external memory buses.
Typical applications include IP network and advanced media processing — specifically, edge routers, secure gateways, network-attached storage controllers, industrial control planes, and telecom line cards that require hardware-accelerated protocol handling alongside a general-purpose host CPU.
When designing with the MPC8536E, allocate generous PCB area for the 29x29 mm BGA, follow NXP's reference PCB stackup for DDR routing, and validate thermal design for sustained 1 GHz operation. Use NXP-supplied U-Boot and Linux SDK images for bring-up.
This page synthesizes distributor pricing, same-family Freescale drop-in alternatives, and practical design context not aggregated in the manufacturer datasheet.
Аналоги без доработки для MPC8536EAVTAQG — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MPC8536EAVTAQG (тот же форм-фактор и посадочное место) — отличается по Core Architecture, Ethernet, Memory Controller, Package, Security Engine.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
MPC8536AVTAQG
✅ Прямая замена✓ В наличии
$171 / шт.
Открыть даташит →MPC8536ECVJATHA
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MPC8548PXAUJB
✅ Прямая замена✓ В наличии
$121.75 / шт.
Открыть даташит →MPC8536EVJAQGA
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
P2020NSND2KFB
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
MPC8536EAVTAQG Максимальные параметры и электрические характеристики
| Processor Series | MPC85xx (PowerQUICC III) |
| Core | PowerPC e500, 32-bit |
| Максимальная тактовая частота | 1.0 GHz |
| Number of Cores | 1 |
| Разрядность шины данных | 32 bit |
| Корпус | 783-FCPBGA (29x29 mm) |
| Тип монтажа | Surface Mount (BGA) |
| Encryption Support | Yes ('E' suffix indicates encryption-enabled silicon) |
| Integrated Peripherals | QUICC Engine, DDR controller, Gigabit Ethernet, PCI Express |
| Instruction Set Architecture | Power Architecture (Book-E) |
Руководство по цоколевке MPC8536EAVTAQG в корпусе 783-fcpbga (29x29 mm)
Цоколевка для MPC8536EAVTAQG (корпус 783-fcpbga (29x29 mm)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для MPC8536EAVTAQG.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
MPC8536EAVTAQG подходит для 6 применениеs: IP Network Edge Router, Secure VPN Gateway / IPsec Appliance, Network-Attached Storage (NAS) Controller, Industrial Control / SCADA Edge Node, Telecom Line Card / DSP Coprocessor Host, Advanced Media Processing Appliance.
IP Network Edge Router
The MPC8536EAVTAQG's 1.0 GHz e500 core plus QUICC Engine hardware acceleration makes it well suited to IP edge routers handling packet classification, NAT/firewall, and routing table lookup at line rate. QUICC Engine offloads protocol processing from the host CPU, freeing the e500 core to run routing daemons and management software. The integrated encryption block ('E' suffix) accelerates IPsec and TLS tunnels at multi-Gbps rates that software alone cannot sustain, while the DDR controller and multiple Gigabit Ethernet MACs provide the memory bandwidth and connectivity required for gigabit uplink aggregation. Engineers can deploy NXP's U-Boot plus mainline Linux BSP for rapid router firmware bring-up.
Рекомендуется
Secure VPN Gateway / IPsec Appliance
The MPC8536EAVTAQG's dedicated encryption hardware accelerates AES, 3DES, SHA-1/256, and public-key operations, making it a strong fit for IPsec VPN gateways and TLS termination appliances. Compared with running cryptography purely in software on a generic MPU, the hardware engine delivers several times higher throughput at lower power dissipation, allowing compact fanless gateway designs. Combined with the QUICC Engine for packet fast-path handling and Gigabit Ethernet MACs for WAN/LAN interfaces, the device delivers a single-chip secure gateway platform. Hardware root-of-trust and secure-boot features further enhance appliance tamper-resistance for enterprise security deployments.
Рекомендуется
Network-Attached Storage (NAS) Controller
In NAS and SOHO storage controllers, the MPC8536EAVTAQG acts as the system-on-chip managing SATA or SAS disk channels, Gigabit Ethernet network interfaces, and the file-system stack running on Linux or a proprietary RTOS. The 1.0 GHz e500 core provides sufficient cycles for SMB/NFS/iSCSI protocol handling at gigabit line rate, while the DDR controller supplies the memory bandwidth needed for RAID rebuild and file-system journaling. The QUICC Engine accelerates network protocol parsing, offloading TCP/IP checksum and segmentation from the host CPU. Hardware encryption enables at-rest disk encryption (AES-XTS) without throughput penalty, a key requirement for business NAS products.
Рекомендуется
Industrial Control / SCADA Edge Node
Long-lifecycle industrial control and SCADA systems benefit from the MPC8536EAVTAQG's mature firmware ecosystem, deterministic e500 core, and proven reliability in 24/7 service. The processor runs real-time Linux or VxWorks handling Modbus/TCP, EtherCAT, or PROFINET gateway functions, while the QUICC Engine accelerates industrial protocol framing. Hardware encryption enables secure remote management tunnels protecting SCADA infrastructure from cyber threats. Because this part family is widely deployed in industrial-grade variants (extended temperature ranges and long-term supply programs), engineers can build equipment with decade-long field lifecycles — critical for utility, railway, and factory automation customers.
Рекомендуется
Telecom Line Card / DSP Coprocessor Host
In telecom equipment such as DSLAMs, PON OLT line cards, and wireless base-station controllers, the MPC8536EAVTAQG serves as a control-plane processor managing line-card housekeeping, OAM messaging, and high-speed uplink aggregation. The 1.0 GHz e500 core handles management-plane software while the QUICC Engine accelerates Layer 2/3 forwarding for subscriber traffic. PCI Express links connect to DSP or framer companion chips on the same line card. Hardware encryption secures backhaul links without consuming host CPU cycles. The 783-FCPBGA package integrates cleanly into dense line-card PCB layouts common in central-office equipment racks.
Рекомендуется
Advanced Media Processing Appliance
The MPC8536EAVTAQG is described in Freescale/NXP documentation as targeting 'advanced media processing applications' alongside networking workloads. The e500 core, combined with QUICC Engine packet handling, supports media transcoding gateways, streaming appliances, and video-surveillance NVR controllers that ingest multiple IP video streams over Gigabit Ethernet. Hardware encryption secures streamed content and management traffic, while the DDR controller provides memory bandwidth for compressed-video frame buffering. Engineers can run media frameworks such as GStreamer on Linux to build IPTV, signage, or surveillance recording products without requiring an additional DSP.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MPC8536EAVTAQG — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MPC8536AVTAQG | MPC8536ECVJATHA | MPC8548PXAUJB | MPC8536EVJAQGA | P2020NSND2KFB |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors (formerly Freescale) | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 783-FCPBGA (29x29 mm) | 783-FCPBGA (29x29) - same | 783-FCPBGA (29x29) - same | 783-FCPBGA (29x29) - same | 783-FCPBGA (29x29) - same | 783-FCPBGA (29x29) - same |
| Core Architecture | PowerPC e500 (single core) | PowerPC e500 (single core) | PowerPC e500 (single core) | PowerPC e500 (dual core) | PowerPC e500 (single core) | PowerPC e500 (dual core) |
| Hardware Encryption | Yes ('E' suffix) | No | Yes | Yes | Yes | No |
| QUICC Engine | Yes | Yes | Yes | Yes | Yes | No (different SoC class) |
| Lifecycle Status | NRND | NRND | NRND | NRND | NRND | NRND |
| Cross-Brand Available | NXP only (PowerPC architecture proprietary) | NXP only | NXP only | NXP only | NXP only | NXP only |
Ключевые отличия
- Hardware encryption integrated on-chip (против MPC8536AVTAQG)
- Single-core cost-optimized design (против MPC8548PXAUJB)
- Mature firmware ecosystem with mainline Linux support (против Layerscape LS1046A)
Заметки по проектированию
Estimated: at 1.0 GHz with typical 1.2 V core and 0.85 W/W core power coefficient, the e500 core dissipates roughly 3-5 W under load. Combined with DDR, SERDES, and I/O power, total board-level dissipation is typically 8-12 W. A 4-layer PCB with a continuous ground plane beneath the 29x29 BGA and small top-side heatsink is recommended. Derate ambient temperature by 10C for sealed enclosures to keep junction below 105C.
Use a minimum 6-layer PCB stackup to route 783 BGA signals, DDR data/address/control matched-length groups within 50 mil, and impedance-controlled differential pairs for SERDES and Gigabit Ethernet. Place 0.1 uF decoupling capacitors on every BGA power ball within 100 mil. Reference NXP's MPC8536DS design checklist for power-rail sequencing and DDR termination topology.
Do not assume the 'E' suffix means only hardware crypto is added — verify security features against the device-specific errata document because some revisions disable certain acceleration paths. Confirm your bootloader (U-Boot) supports the exact silicon revision in the AVTAQG suffix code; rev 2.x silicon requires U-Boot >= 2023.04 for secure-boot flow. Plan second-source qualification early because NXP NRND status will limit future production windows.
Информация о соответствии
Compliance data not available in the verified web data; refer to the manufacturer's product page for RoHS/REACH confirmation. AEC-Q100 is not applicable — automotive-grade qualification is not indicated for this MPN.