MPC8536EBVJANGA - PowerQUICC III e500 MPU, 800MHz | NXP
Артикул: MPC8536EBVJANGA ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $191.55 | $191,55 |
| 10 | $178.25 | $1.782,50 |
| 100 | $156.4 | $15.640,00 |
| 500 | $138.9 | $69.450,00 |
| 1.000 | $124.75 | $124.750,00 |
MPC8536EBVJANGA Обзор
A PowerQUICC III / PowerPC microprocessor is a category of system-on-chip (SoC) communications processor that combines a high-performance RISC CPU core with sophisticated I/O and accelerator engines. The e500 core uses a Book-E architecture with dual-issue superscalar pipeline, on-chip L1 cache (32KB I-cache + 32KB D-cache), and a 256KB L2 cache. The MPC8536E sits within the broader taxonomy of embedded communications processors: microprocessor -> application processor -> SoC -> communications SoC -> networking/edge MPU. This integrated approach reduces BOM count versus a CPU-plus-discrete-controller architecture.
Key features include 800MHz e500 core frequency, integrated DDR2/DDR3 SDRAM controller with ECC, dual 10/100/1000 Ethernet controllers supporting SGMII, two SATA 2.0 controllers, PCIe and PCI interfaces, USB 2.0, SD/MMC, four UARTs, two I2C, SPI, IEEE 1588 timestamping, and SEC 4.0 crypto acceleration. The part is included in NXP's product longevity program with assured supply for 10+ years post-launch. Per NXP product page, this part is in End-of-Life status with a documented replacement path.
The on-chip interconnect is a multi-master Coherency Fabric with packet-based transactions, and the integrated SEC block handles DES/3DES, AES (128/192/256), SHA-1/256, MD5, HMAC, and Kasumi. The integrated memory controller supports up to DDR3-800 with error correction, reducing external component count.
Typical applications include industrial networking gateways, unified threat management (UTM) appliances, network attached storage (NAS), LTE/4G small cells, and line cards for edge routers. The combination of GbE, SATA, and SEC makes it a single-chip solution for secure storage appliances.
When designing with this part, allocate adequate PCB area for the 29x29 mm FC-PBGA package, use impedance-controlled SDRAM traces with matched lengths, and provide a low-noise 1.0V core supply. Thermal management must account for 4-7W typical dissipation depending on I/O activity.
This page synthesizes distributor pricing, end-of-life status, drop-in alternatives from the same MPC8536E family, and practical design guidance not consolidated on the manufacturer product page.
Аналоги без доработки для MPC8536EBVJANGA — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MPC8536EBVJANGA (тот же форм-фактор и посадочное место) — отличается по Ethernet, Memory Controller, Mounting Type, Operating Temperature, PCI Express.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
MPC8536EAVTANGA
✅ Прямая замена✓ В наличии
$84.75 / шт.
Открыть даташит →MPC8536EAVJANGA
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MPC8536EAVTANG
✅ Прямая замена✓ В наличии
$85.4 / шт.
Открыть даташит →MPC8536EBVJANG
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MPC8536EBVJANGA-R
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MPC8536EBVJANGA Максимальные параметры и электрические характеристики
| Core Architecture | PowerPC e500 |
| Core Count | 1 |
| Разрядность шины данных | 32-Bit |
| Core Frequency | 800 MHz |
| Корпус | 783-FCPBGA (29x29) |
| Рабочая температура | 0C to +105C |
| Process Technology | 0.09 um |
| Напряжение питания | 1.5V / 1.8V / 2.5V / 3.3V |
| Minimum Supply Voltage | 0.95 V |
| L1 Cache | 32KB I-cache + 32KB D-cache |
| L2 Cache | 256 KB |
| Memory Controller | DDR2/DDR3 with ECC |
| Ethernet | 2x 10/100/1000 (eTSEC) with SGMII support |
| SATA | 2x SATA 2.0 (multiplexed with SGMII) |
| PCI Express | PCIe and PCI interfaces |
| USB | USB 2.0 |
| Storage I/O | SD/MMC, SDHC |
| Security Engine | SEC 4.0 (DES/3DES/AES/SHA) |
| Тип монтажа | Surface Mount (FC-PBGA) |
Руководство по цоколевке MPC8536EBVJANGA в корпусе 783-fcpbga (29x29)
Цоколевка для MPC8536EBVJANGA (корпус 783-fcpbga (29x29)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для MPC8536EBVJANGA.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
MPC8536EBVJANGA подходит для 6 применениеs: Industrial Networking Gateway, Unified Threat Management Appliance, Network Attached Storage (NAS), LTE/4G Small Cell Base Station, Edge Router Line Card, Industrial IoT Protocol Bridge.
Industrial Networking Gateway
Industrial networking gateways demand a MPU with high-throughput packet processing, multiple GbE interfaces, and long-term supply assurance. The MPC8536EBVJANGA's dual 10/100/1000 eTSEC ports with SGMII, integrated SEC 4.0 crypto engine (AES-256/SHA-256), and 800MHz e500 core make it well-suited for protocol-conversion gateways translating Modbus/TCP, EtherNet/IP, and PROFINET. The integrated dual SATA ports enable local log storage on gateway hardware, while PCIe supports a hardware accelerator card for deep-packet inspection. The NXP product longevity program's 10-year assured supply is critical for factory-floor deployments with 15-20 year service lifetimes. Designers should provision a PMIC with sequencing (NXP MMPF0100) and use impedance-controlled SDRAM traces with lengths matched within 50 mil across the DDR3 byte lanes.
Рекомендуется
Unified Threat Management Appliance
Unified threat management (UTM) appliances consolidate firewall, VPN, IDS/IPS, and content filtering into a single hardware platform, demanding tight coupling between cryptographic acceleration and packet I/O. The MPC8536EBVJANGA integrates the SEC 4.0 block accelerating AES, 3DES, SHA, and Kasumi at line rate while the dual GbE ports handle North-South traffic with IEEE 1588 hardware timestamping for accurate log correlation. The 800MHz e500 core runs the policy engine, and the 256KB on-chip L2 cache reduces latency for state-table lookups. Compared with discrete CPU-plus-cryptographic-ASIC designs, this SoC approach cuts PCB area by ~40 percent and BOM cost by ~30 percent, per typical industrial reference designs. The robust thermal envelope (0C to +105C) supports fanless chassis designs common in SMB branch-office UTM deployments.
Рекомендуется
Network Attached Storage (NAS)
Small/medium-business NAS appliances benefit from the MPC8536EBVJANGA's combination of dual SATA 2.0 ports, GbE, and integrated SEC for encrypted volumes. The e500 core runs a Linux NAS stack (OpenWrt or custom distro) while the dual SATA drives attach directly without an additional RAID controller in entry-level configurations. SEC-accelerated AES-256 enables hardware-offloaded SMB3 encryption at near-line-rate, eliminating the typical 30-40 percent throughput penalty of software crypto. The DDR3 controller with ECC supports up to 4GB of addressable memory, sufficient for read-ahead caching. Industrial-grade variants of the same die (MPC8536EAVTANGA) extend operation to -40C for outdoor enclosures. Compared to ARM-based NAS controllers, the PowerPC e500 offers faster cryptographic throughput and more deterministic interrupt latency.
Рекомендуется
LTE/4G Small Cell Base Station
Small cell base stations require deterministic packet processing, hardware timestamping via IEEE 1588, and tight integration between Ethernet and acceleration engines. The MPC8536EBVJANGA's SGMII interfaces connect directly to fronthaul Ethernet PHYs, while the dual eTSEC ports backhaul to the EPC. The 800MHz e500 core runs the L2/L3 protocol stack and the SEC engine secures the S1 interface. Hardware timestamping accuracy of sub-microsecond is critical for LTE-TDD and 5G NR synchronisation requirements, achievable with the integrated PTP block. Compared to general-purpose Intel x86 small-cell designs, this SoC consumes approximately 3-5W TDP, enabling fanless pico-cell form factors suitable for indoor or street-cabinet mounting.
Рекомендуется
Edge Router Line Card
Edge router line cards aggregate multiple access links and forward traffic to the core router fabric. The MPC8536EBVJANGA provides two independent GbE user-network interfaces plus PCIe/PCI for fabric connectivity, making it suitable as a control-plane processor on a modular line card. The packet-based coherency fabric routes DMA traffic between the SEC engine, SATA controllers, and Ethernet DMA with predictable latency. Running the e500 core at 800MHz versus 600MHz (the BVJANGA vs BVJANG grade) yields approximately 25 percent faster control-plane convergence during routing-protocol reconvergence. Per NXP's reference manuals, the part's deterministic interrupt latency supports tight timing budgets required for SLA-bound services.
Рекомендуется
Industrial IoT Protocol Bridge
Industrial IoT protocol bridges translate legacy fieldbus protocols (PROFIBUS, Modbus RTU, CAN, DeviceNet) to IP-based protocols for cloud connectivity. The MPC8536EBVJANGA's e500 core runs multiple protocol stacks concurrently while the SEC engine secures MQTT-over-TLS or OPC-UA connections. The dual UARTs, dual I2C, and SPI interfaces connect directly to legacy serial fieldbus bridges and to sensors, eliminating external UART expander ASICs in designs with 4-6 fieldbus channels. Industrial-grade temperature variants support deployment in unconditioned outdoor control cabinets. Compared to ARM Cortex-A5/A7 alternatives, the e500 offers a more mature Linux BSP and longer guaranteed supply via NXP's longevity program, both critical factors for industrial customers with long qualification cycles.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MPC8536EBVJANGA — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MPC8536EAVTANGA | MPC8536EAVJANGA | MPC8536EAVTANG | MPC8536EBVJANG |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 783-FCPBGA (29x29 mm) | 783-FCPBGA (29x29 mm) - same | 783-FCPBGA (29x29 mm) - same | 783-FCPBGA (29x29 mm) - same | 783-FCPBGA (29x29 mm) - same |
| Core Frequency | 800 MHz | 800 MHz | 800 MHz | 600 MHz | 600 MHz |
| Operating Temperature | 0C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | 0C to +105C |
| L2 Cache | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB |
| Memory Controller | DDR2/DDR3 with ECC | DDR2/DDR3 with ECC | DDR2/DDR3 with ECC | DDR2/DDR3 with ECC | DDR2/DDR3 with ECC |
| Ethernet Ports | 2x GbE (eTSEC/SGMII) | 2x GbE (eTSEC/SGMII) | 2x GbE (eTSEC/SGMII) | 2x GbE (eTSEC/SGMII) | 2x GbE (eTSEC/SGMII) |
| SATA Ports | 2x SATA 2.0 (mux with SGMII) | 2x SATA 2.0 (mux with SGMII) | 2x SATA 2.0 (mux with SGMII) | 2x SATA 2.0 (mux with SGMII) | 2x SATA 2.0 (mux with SGMII) |
| Security Engine | SEC 4.0 | SEC 4.0 | SEC 4.0 | SEC 4.0 | SEC 4.0 |
| Lifecycle Status | EOL (10yr longevity) | EOL (10yr longevity) | EOL (10yr longevity) | EOL (10yr longevity) | EOL (10yr longevity) |
Ключевые отличия
- Integrated SEC 4.0 crypto engine with 10Gbps AES throughput (против MPC8544VJALFA)
- Dual SATA 2.0 ports multiplexed with SGMII (против MPC8536EAVTANG (600MHz grade))
- 10-year product longevity program guarantee (против Generic industrial MPU without longevity program)
Заметки по проектированию
Estimated: at 800MHz with full GbE line-rate traffic, typical core power dissipation is 4-5W and total package dissipation 5-7W. A four-rail PMIC (e.g., NXP MMPF0100) is recommended to provide 1.0V core, 1.5V DDR3, 1.8V DDR2, and 2.5V/3.3V I/O. Power sequencing must enforce core-up-before-IO with monotonic rise; violation can trigger permanent latch-up on this SoC. The integrated POR block supervises core rail but not I/O rails - external voltage monitors are required for industrial safety integrity.
Route the DDR3 byte lanes as point-to-point daisy-chained with impedance-controlled 50 ohm single-ended traces (100 ohm differential for DQS pairs). Length-match all byte-lane bits within 25 mils and match DQS-CK within 50 mils for proper write-levelling. The 783-ball FC-PBGA package requires a minimum 8-layer stack-up with dedicated ground planes under the BGA fanout. Thermal vias (0.2mm drill, 0.5mm pitch, filled) under the central exposed pad are required for heat extraction on packages of this thermal density.
Avoid using the SERDES reference clock derived from a non-PLL-clean source; the integrated SERDES requires a 100 MHz LVDS reference with sub-100ps phase noise. The SATA ports are MUXED with SGMII lanes - selecting one disables the other at boot via RCW (Reset Configuration Word). The SEC engine consumes roughly 0.8W under sustained AES-256 load; thermal envelope must account for combined crypto + GbE line-rate dissipation. Last-time-buy customers should order 1.5x the calculated lifetime demand to cover repair stock.
Информация о соответствии
Lead-free per FC-PBGA packaging. RoHS and halogen status not confirmed in provided data - consult manufacturer datasheet section 13 (Regulatory Information). NXP publishes product compliance data via their Product Compliance portal.
