MPXA6115AC6U - 15-115 kPa Absolute Pressure Sensor | NXP
Артикул: MPXA6115AC6U ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $16.5 | $16,50 |
| 10 | $14.85 | $148,50 |
| 100 | $12.95 | $1.295,00 |
| 500 | $11.4 | $5.700,00 |
| 1.000 | $9.95 | $9.950,00 |
MPXA6115AC6U Обзор
An absolute pressure sensor measures pressure relative to a sealed internal vacuum reference rather than ambient atmosphere, producing a stable output that correlates directly with absolute barometric pressure. The MPXA6115AC6U belongs to the integrated pressure sensor category, sitting within the broader hierarchy of MEMS sensors -> transducers -> sensors -> electronic components. Absolute pressure variants are distinguished from gauge pressure sensors (which reference ambient) and differential pressure sensors (which measure the difference between two ports); this makes absolute types ideal for sealed-system measurements where ambient drift must be excluded.
Key features include ±1.5% maximum accuracy over 0°C to +85°C, on-chip temperature compensation and calibration, ratiometric analog output for ADC interfacing, and a robust MEMS silicon sensing element. The integrated signal chain eliminates the need for external amplification or compensation circuitry, simplifying board design and reducing BOM cost. The single-port top-tube inlet accepts a 0.13" (3.17 mm) tube for pneumatic connection.
The internal architecture combines a piezoresistive MEMS bridge with a precision bipolar op-amp stage and laser-trimmed thin-film resistors. This monolithic integration provides the temperature compensation required to maintain accuracy across the operating range while delivering an amplified output ready for direct ADC sampling. According to NXP datasheet SG626, the device is rated for -40°C to +125°C operation with typical response time of 1.0 ms.
Typical applications include automotive engine manifold absolute pressure (MAP) sensing, barometric pressure altimeters, weather stations, HVAC pressure monitoring, medical respiratory equipment, and industrial process control. The wide 100 kPa operating span and calibrated output make it well suited for altitude tracking in drones and portable navigation devices.
When designing with this sensor, decouple VCC with a 100 nF ceramic capacitor placed within 5 mm of the supply pin and add a 10 µF bulk capacitor on the supply rail to suppress switching noise from upstream regulators. The output is high-impedance during power-up; allow at least 1 ms settling time after VCC reaches 4.75 V before sampling.
This page synthesizes distributor pricing, drop-in alternative cross-references, and practical design notes not found in the manufacturer datasheet alone.
Аналоги без доработки для MPXA6115AC6U — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MPXA6115AC6U (тот же форм-фактор и посадочное место) — отличается по Accuracy, Port Style, Supply Voltage, Package, Signal Conditioning.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
MPXAZ6115APT1
✅ Прямая замена✓ В наличии
$8.95 / шт.
Открыть даташит →MPXA6115AC6T1
✅ Прямая замена✓ В наличии
$8.65 / шт.
Открыть даташит →MPXA6115A6U
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$10.8 / шт.
Открыть даташит →KP214N2611XTMA1
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MPXH6115AC6U
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$5.75 / шт.
Открыть даташит →MPXA4115A6U
✅ Прямая замена✓ В наличии
$10.5 / шт.
Открыть даташит →MPXA6115AC6U Максимальные параметры и электрические характеристики
| Pressure Type | Absolute |
| Operating Pressure Range | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Диапазон выходного напряжения | 0.2 V to 4.7 V (at 5 V supply) |
| Sensitivity | 45.9 mV/kPa (typical) |
| Напряжение питания | 4.75 V to 5.25 V |
| Accuracy | ±1.5% (0°C to +85°C) |
| Рабочая температура | -40°C to +125°C |
| Response Time | 1.0 ms (typical) |
| Port Style | Single axial top port, 0.13" (3.17 mm) tube |
| Корпус | 8-SMD, Gull Wing (Case 1320-02, SOP-8) |
| Тип монтажа | Surface Mount |
| Тип выхода | Analog, ratiometric |
| Signal Conditioning | On-chip bipolar op-amp, temperature compensated |
| Element Type | Piezoresistive MEMS silicon |
| Статус RoHS | Compliant |
Конфигурация выводов MPXA6115AC6U
| Контакт 1 | VCC — Supply voltage (5 V nominal) |
| Контакт 2 | GND — Ground |
| Контакт 3 | VOUT — Analog pressure output (0.2 V to 4.7 V) |
| Контакт 4 | NC — Not connected (per datasheet) |
| Контакт 5 | NC — Not connected (per datasheet) |
| Контакт 6 | NC — Not connected (per datasheet) |
| Контакт 7 | NC — Not connected (per datasheet) |
| Контакт 8 | NC — Not connected (per datasheet) |
Типичное применение
MPXA6115AC6U подходит для 7 применениеs: Automotive Manifold Absolute Pressure (MAP) Sensing, Barometric Altimeter for Drones and Portable Navigation, Weather Station Barometric Pressure Monitoring, HVAC Duct and Filter Pressure Monitoring, Medical Respiratory and CPAP Pressure Monitoring, Industrial Process Control and Pneumatic Systems, Appliance Water Level and Pump Pressure Sensing.
Automotive Manifold Absolute Pressure (MAP) Sensing
The MPXA6115AC6U delivers the calibrated 0.2 V to 4.7 V absolute pressure output required by engine control units for fuel injection and ignition timing calculations. With 45.9 mV/kPa sensitivity and ±1.5% accuracy over 0°C to +85°C, it provides reliable manifold pressure data across the full 15-115 kPa range encountered at idle, cruise, and wide-open throttle. The top-port tube inlet integrates directly with intake manifold vacuum lines. For under-hood reliability, the operating range extends to +125°C ambient. Source: NXP datasheet SG626.
Рекомендуется
Barometric Altimeter for Drones and Portable Navigation
The MPXA6115AC6U's 15-115 kPa absolute range covers altitudes from sea level up to approximately 9000 m with the 45.9 mV/kPa sensitivity delivering ~4.4 mV per meter of altitude at sea level. Its ±1.5% accuracy and 1.0 ms response time enable sub-meter altitude resolution when paired with a 12-bit ADC. Low power and ratiometric output simplify battery-powered drone and handheld GPS designs. Source: NXP datasheet SG626.
Рекомендуется
Weather Station Barometric Pressure Monitoring
For consumer and professional weather stations, the MPXA6115AC6U measures barometric pressure from 600 to 1050 mbar equivalent (60-105 kPa sub-range) with the accuracy required for weather prediction algorithms. The absolute reference eliminates drift from system altitude changes, and the analog output interfaces directly with microcontrollers via ADC. The SOP-8 surface-mount package enables compact weather sensor PCB designs. Source: NXP datasheet SG626.
Рекомендуется
HVAC Duct and Filter Pressure Monitoring
Building HVAC systems use the MPXA6115AC6U to monitor static pressure across filters, coils, and duct sections, with the 15-115 kPa range covering typical duct pressure differentials. The single top-port design simplifies pneumatic tap installation, and the ratiometric analog output integrates with standard 0-5 V HVAC controller inputs. Operating to +85°C supports plenum-mounted installations. Source: NXP datasheet SG626.
Рекомендуется
Medical Respiratory and CPAP Pressure Monitoring
Medical respiratory equipment such as CPAP machines and ventilators use the MPXA6115AC6U to monitor airway pressure with the accuracy required for therapy delivery. The 45.9 mV/kPa sensitivity and ±1.5% accuracy enable precise pressure control from 15 to 115 kPa, covering typical CPAP pressure ranges of 4-20 cmH2O mapped to the lower portion of the sensor's output span. Source: NXP datasheet SG626.
Рекомендуется
Industrial Process Control and Pneumatic Systems
Factory automation systems use the MPXA6115AC6U to monitor sealed gas pressures in pneumatic actuators, vacuum systems, and process chambers. The absolute reference makes readings independent of atmospheric variation across the factory floor, and the -40°C to +125°C operating range supports unconditioned industrial environments. The on-chip signal conditioning eliminates external amplification, reducing PCB complexity. Source: NXP datasheet SG626.
Рекомендуется
Appliance Water Level and Pump Pressure Sensing
White goods such as washing machines and dishwashers use the MPXA6115AC6U to detect water level via pressure transducer tubes connected to the sump. The 15-115 kPa range covers typical domestic water column pressures, and the analog output integrates directly with appliance control MCUs. The robust SOP-8 package withstands vibration and humidity typical of appliance environments. Source: NXP datasheet SG626.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MPXA6115AC6U — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MPXAZ6115APT1 | MPXA6115AC6T1 | KP214N2611XTMA1 | MPXA4115A6U |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | Infineon | NXP Semiconductors |
| Package | 8-SOP (Case 1320-02) | 8-SOP - same | 8-SOP - same | 8-DSOF - same pin count | 8-SOP - same |
| Pressure Range | 15-115 kPa | 15-115 kPa | 15-115 kPa | 15-115 kPa | 15-150 kPa |
| Output Voltage | 0.2 V to 4.7 V | 0.2 V to 4.7 V | 0.2 V to 4.7 V | 0.1 V to 4.85 V | 0.2 V to 4.8 V |
| Supply Voltage | 4.75 V to 5.25 V | 4.75 V to 5.25 V | 4.75 V to 5.25 V | 5 V nominal | 4.75 V to 5.25 V |
| Automotive Grade | No | Yes (AEC-Q100) | No | Yes (AEC-Q100) | No |
| Operating Temperature | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C |
Ключевые отличия
- Integrated signal conditioning eliminates external op-amps (против Raw MEMS sensors (e.g. bare piezoresistive bridges))
- Wide operating temperature range up to +125°C (против MPX4115A series (rated to +85°C only))
- Direct NXP-to-NXP drop-in upgrade path with AEC-Q100 (против MPXAZ6115APT1 (same package, automotive grade))
Заметки по проектированию
Decouple the VCC pin with a 100 nF ceramic capacitor placed within 5 mm of the package and add a 10 µF bulk capacitor on the supply rail. The MPXA6115AC6U is sensitive to high-frequency noise on the 5 V supply, which couples into the analog output and degrades ADC resolution. Use a low-noise LDO (such as NXP's TLV70033 or equivalent) rather than a switching regulator for the sensor supply when measuring low-pressure differentials below 5 kPa.
Place the sensor away from PCB regions with high thermal gradients such as near power devices orifices orifices. The MEMS die is temperature-sensitive and the on-chip compensation is calibrated assuming uniform thermal exposure. Keep the top-port tube inlet vertical to avoid condensate accumulation in the pressure cavity for humid environment applications like medical respiratory equipment.
Route the analog VOUT trace away from digital switching lines, clock generators, and PWM signals to avoid coupling noise. Add an RC low-pass filter (10 kΩ + 100 nF, fc ≈ 160 Hz) at the ADC input if high-frequency noise is present; the MPXA6115AC6U's 1.0 ms response time supports filtering below 1 kHz without dynamic measurement degradation. Source: NXP datasheet SG626.
Do not apply pressure beyond 200 kPa or vacuum beyond 0 kPa to the top port - the MEMS diaphragm will permanently deform. Apply power with monotonic ramp; voltage transients below 4.75 V can cause the output to enter undefined states. Avoid ESD exposure; the device is rated at HBM 2 kV per NXP datasheet SG626. Use a tube clamp to secure the pneumatic connection and prevent mechanical stress on the package.
Информация о соответствии
Standard MPXA6115AC6U is not AEC-Q100 qualified; choose MPXAZ6115APT1 variant for automotive applications. RoHS compliant per NXP product page. Halogen-free per NXP environmental certification.
