Texas Instruments

MSP430F2011TPW - 16MHz 2KB Flash MCU | Texas Instruments

Артикул: MSP430F2011TPW ✓ Активен
2.2 V Vdss 0.1 uA Id 14-TSSOP Package 16 MHz Speed 2 KB Memory
MOQ: 1 |

MSP430F2011TPW Обзор

The Texas Instruments MSP430F2011TPW is an ultra-low-power mixed-signal microcontroller with a 16-bit RISC CPU, 16 MHz maximum clock, 2 KB of Flash memory, 128 bytes of SRAM, and a 14-TSSOP package. It includes a 16-bit timer, ten I/O pins, and a versatile analog comparator for compact embedded-control designs.

An ultra-low-power mixed-signal microcontroller combines a digital processor with analog and timing resources on one device. The MSP430 architecture belongs to the microcontroller hierarchy and targets battery-powered or energy-conscious embedded systems, where fast wake-up, low standby consumption, and compact packaging can extend operating life. The MSP430F2011 is particularly useful when a product needs more control capability than a basic logic device but does not require a large memory footprint.

The MSP430F2011 operates at up to 16 MHz and provides 2 KB of Flash plus 128 bytes of SRAM. Its digitally controlled oscillator wakes the device from low-power mode to active mode in less than 1 microsecond. A 16-bit timer supports periodic and event-based control, while ten I/O pins allow interaction with sensors, switches, indicators, and external control logic. The integrated analog comparator supports threshold measurement and simple signal-conditioning tasks.

Internally, the device uses a 16-bit RISC architecture with a 125 ns minimum instruction-cycle time at its maximum operating frequency. Its low-power design includes five power-saving modes, standby wake-up in less than 6 microseconds, and off-mode RAM retention at approximately 0.1 microsecond. These characteristics let firmware remain dormant between events and respond quickly when measurement, control, or communication activity is required.

Typical applications include battery-powered sensors, compact industrial transducers, handheld instruments, low-power data loggers, and embedded control modules. The integrated comparator is useful for battery threshold detection, while the timer can establish fixed measurement intervals or generate control events without an additional timing IC. The 14-TSSOP package also supports space-constrained circuit boards where a larger quad flat package would be unnecessary.

Designers should review the device's power-supply limits, clock configuration, and I/O tolerances in the manufacturer datasheet before finalizing a PCB. Place decoupling capacitance close to the supply pins, route clock and sensitive analog inputs away from fast-switching nodes, and confirm unused I/O states during reset. Firmware development also depends on matching the programmed device variant and respecting the device family's memory and peripheral map.

This product overview combines the MSP430F2011TPW specifications, order-code alternatives, pin and package considerations, and practical low-power design guidance in a format that supports component selection, schematic review, firmware planning, and procurement.

Аналоги без доработки для MSP430F2011TPW — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с MSP430F2011TPW (тот же форм-фактор и посадочное место) — отличается по Package, Mounting Type, Product Type, Standby Wake-Up Time.

Texas Instruments
Package: 14-PDIP
Mounting Type: Through-hole
Product Type: 16-bit ultra-low-power mixed-signal microcontroller
Сравнить с MSP430F2011TPW →
Texas Instruments
Package: 14-pin PDIP (N)
Mounting Type: Through-hole
Сравнить с MSP430F2011TPW →

MSP430F2011IPW

✅ Прямая замена
Texas Instruments
📦 14-TSSOP
16-bit ultra-low-power mixed-signal microcontroller · MSP430 16-bit RISC · 16 MHz · 2 KB · 128 B · 10 pins · 1 built-in 16-bit timer · 1 integrated analog comparator

Уточнить цену

Открыть даташит →

MSP430F2011TN

✅ Прямая замена
Texas Instruments
📦 14-TSSOP
16-bit RISC · 16 MHz · 2 KB · 128 bytes · 2 KB (2K x 8 + 256 bytes) · Timer and comparator · 14-pin PDIP (N) · 14 pins

Уточнить цену

Открыть даташит →

MSP430F2011IN

✅ Прямая замена
Texas Instruments
📦 14-TSSOP
16-bit ultra-low-power mixed-signal microcontroller · 16 MHz · 16-bit RISC · 16 bit · 2 KB · 128 bytes · 1.8 V to 3.6 V · 220 µA at 1 MHz and 2.2 V

Уточнить цену

Открыть даташит →

MSP430F2011TPW Максимальные параметры и электрические характеристики

Architecture 16-bit RISC
Product Type Ultra-low-power mixed-signal microcontroller
Максимальная тактовая частота 16 MHz
Minimum Instruction Cycle Time 125 ns
Flash Memory 2 KB
Flash Organization 2K x 8
SRAM 128 bytes
Additional Flash Region 256 bytes
General-Purpose I/O Pins 10 pins
Timer 1 built-in 16-bit timer
Analog Comparator 1 integrated analog comparator
DCO Wake-Up Time Less than 1 us
Standby Wake-Up Time Less than 6 us
Low-Power Modes 5 modes
Off-Mode RAM Retention Current 0.1 uA
Напряжение питания 2.2 V
Корпус 14-TSSOP
Тип монтажа Surface mount
Temperature Grade Industrial
Статус RoHS Compliant
Lead-Free Status Lead-free

Руководство по цоколевке MSP430F2011TPW в корпусе 14-tssop

Цоколевка для MSP430F2011TPW (корпус 14-tssop). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса 14-tssop для MSP430F2011TPW

Нет подробных данных о распиновке для MSP430F2011TPW.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

MSP430F2011TPW подходит для 6 применениеs: Battery-Powered Threshold Sensor, Compact Industrial Transducer, Low-Power Data Logger, Handheld Measurement Instrument, Smart Home Sensor Node, Portable Control Module.

🔋

Battery-Powered Threshold Sensor

The MSP430F2011TPW fits battery-powered threshold sensing because its integrated analog comparator can evaluate an analog input while the 16-bit CPU remains in a low-power state. The comparator provides a practical path for detecting battery level, resistive sensor thresholds, or simple external signals without requiring a separate comparator IC. Its less-than-1-microsecond DCO wake-up allows firmware to respond rapidly to an interrupt, while five low-power modes support long idle intervals. The design must still account for divider leakage, comparator settling, and the current drawn by the sensor network.

🏭

Compact Industrial Transducer

The MSP430F2011TPW is appropriate for compact industrial transducers that combine a sensor input with a local timer and simple control outputs. Ten I/O pins provide connections for digital sensors, alarm signals, status indicators, and actuator drivers, while the 16-bit timer supports periodic sampling or deterministic control intervals. Its 14-TSSOP package reduces board area compared with a larger controller, and the 16 MHz CPU provides useful headroom for signal conditioning and state management. Industrial designs should verify the exact temperature grade and use appropriate input protection.

🗄️

Low-Power Data Logger

The MSP430F2011TPW supports low-power data logging when measurements can be acquired and stored in a compact buffer before a slower transfer interval. The 128-byte SRAM can hold volatile samples, while 2 KB of Flash provides space for firmware and limited nonvolatile records. Less-than-1-microsecond active-mode wake-up helps the device react promptly to scheduled or external events, and the timer provides a convenient basis for periodic sampling. Long-term logging requires careful attention to flash write endurance and the energy consumed by the external sensor and communications hardware.

🖥️

Handheld Measurement Instrument

The MSP430F2011TPW is useful in handheld measurement instruments where a small display, sensor, and control interface must operate from limited energy. Its integrated comparator can support thresholding or range detection, while the 16-bit timer can establish measurement timing and UI update intervals. The 14-TSSOP package leaves board space for the sensor, regulator, and user controls, and the processor's fast wake-up allows the instrument to sleep between operator actions. Firmware should suspend unused peripherals and account for display and sensor loads when estimating battery life.

🧩

Smart Home Sensor Node

The MSP430F2011TPW can serve as a smart-home sensor node that wakes for a measurement, evaluates a threshold, and returns to sleep. Its ten I/O pins are sufficient for a compact node using switches, a digital sensor, and status indicators, while the integrated analog comparator reduces the need for additional signal-conditioning hardware. Low-power operation is central to the application because the node may rely on batteries or energy harvesting. Communication energy, regulator quiescent current, and the duration of each active cycle will usually dominate the overall power budget.

📱

Portable Control Module

The MSP430F2011TPW fits portable control modules that require timed outputs, flexible digital I/O, and rapid recovery from sleep. The 16-bit timer can generate precision delays, PWM-related timing, or sampling intervals, and the ten I/O pins can interface with pushbuttons, indicators, and discrete actuators. A 14-TSSOP footprint supports dense portable products, while 16 MHz operation is ample for straightforward control logic. Output drive limits, supply range, and timing tolerance should be checked against the connected load before schematic approval.

What are the key specifications of MSP430F2011TPW that engineers should know?
The MSP430F2011TPW is a 16-bit ultra-low-power mixed-signal microcontroller with a 16 MHz CPU, 2 KB of Flash, 128 bytes of SRAM, and ten I/O pins in a 14-TSSOP package. According to the Texas Instruments product page, it also includes a 16-bit timer, an integrated analog comparator, five low-power modes, and DCO wake-up in less than 1 microsecond. These parameters position it for compact, battery-powered embedded-control designs that need deterministic low-power behavior without a larger memory footprint.
How much Flash and SRAM does the MSP430F2011TPW have?
The MSP430F2011TPW provides 2 KB of Flash memory and 128 bytes of SRAM. The DigiKey listing identifies the Flash as 2K x 8 plus 256 bytes, while the Texas Instruments product page identifies 2 KB of Flash and 128 B of SRAM. This memory footprint is suitable for compact control firmware, state machines, sensor processing, and low-complexity communication routines, but applications requiring large buffers or extensive code should select a higher-memory MSP430 family member.
What can replace the MSP430F2011TPW?
The MSP430F2011IPW is the closest identified drop-in alternative for the MSP430F2011TPW because both use the same MSP430F2011 device family, 14-TSSOP package, 16 MHz rating, 2 KB Flash, and 128-byte SRAM. According to the Texas Instruments product page and the manufacturer cross-reference listing, the main distinction is the ordering-code treatment. Confirm the required temperature grade and reel or tube ordering convention before production release. No independently verified cross-brand drop-in replacement was identified.
Is MSP430F2011IPW the same as MSP430F2011TPW?
The MSP430F2011IPW and MSP430F2011TPW use the same MSP430F2011 base device and 14-TSSOP package, with matching core frequency and memory ratings in the manufacturer and distributor information. Their ordering codes differ, so they should not be treated as automatically interchangeable without checking the required temperature grade and packing method. The manufacturer cross-reference search supports using the TI cross-reference tool for final ordering-code verification before a substitution is released.
What is the best cross-brand equivalent for the MSP430F2011TPW?
No cross-brand drop-in equivalent for the MSP430F2011TPW was verified with confidence. The Texas Instruments product page identifies MSP430F2011 as a proprietary MSP430 mixed-signal architecture with a specific 14-TSSOP pin arrangement, so a competitor device with similar clock speed and memory would not necessarily preserve the pinout, peripheral map, or firmware compatibility. Use the manufacturer cross-reference search and confirm every pin and peripheral before considering a redesign rather than a drop-in substitution.
Where can I download the MSP430F2011TPW datasheet PDF?
The official MSP430F2011TPW datasheet PDF is available from the Texas Instruments document link at https://www.ti.com/lit/ds/symlink/msp430f2011.pdf. The document covers the MSP430F20x1, MSP430F20x2, and MSP430F20x3 mixed-signal microcontroller family. Use its pin-description table, electrical characteristics, clock information, and ordering tables when assigning PCB connections and validating an operating design.
Where can I find the MSP430F2011TPW pinout?
The MSP430F2011TPW pinout is found in the pin-configuration and terminal-description tables of the Texas Instruments MSP430F2011 family datasheet. The device is supplied in a 14-TSSOP package, so use the manufacturer diagram for the physical pin arrangement rather than inferring connections from the ordering code. Confirm power, ground, reset, test, clock, and I/O assignments against the specific MSP430F2011 variant before laying out or modifying a PCB.
How fast can the MSP430F2011TPW wake from low-power mode?
The MSP430F2011TPW can wake from low-power mode to active mode in less than 1 microsecond using its digitally controlled oscillator. According to the Texas Instruments product page, standby-mode wake-up is less than 6 microseconds. These response times make the MCU suitable for intermittent sensing and event-driven control, provided the firmware retains the required state and the external sensor or interrupt source can operate within the application's energy budget.
Is the MSP430F2011TPW suitable for battery-powered sensor designs?
The MSP430F2011TPW is suitable for battery-powered sensor designs because it combines five low-power modes, less than 1 microsecond DCO wake-up, and an integrated analog comparator. The comparator can monitor a battery or sensor threshold while the CPU remains inactive, and the timer can schedule periodic measurements. Actual battery life depends on the external sensor, divider resistance, duty cycle, transmission behavior, and the selected operating mode, so calculate the complete system current rather than the MCU current alone.
MSP430F2011TPW vs MSP430F2011IPW: which should I select?
Select the MSP430F2011TPW when that exact ordering code, package form, temperature treatment, and supply configuration match the production BOM. The MSP430F2011IPW is the closest identified alternative because it shares the MSP430F2011 base device and 14-TSSOP package. According to the Texas Instruments product page, the core resource set is the same; the decision depends on the approved ordering code and manufacturing format. Verify the manufacturer ordering table before changing a released design.
When should I choose the MSP430F2011TPW over another MSP430 microcontroller?
Choose the MSP430F2011TPW when a design needs a 16 MHz mixed-signal MCU, 2 KB of Flash, 128 bytes of SRAM, ten I/O pins, one 16-bit timer, and one analog comparator in a compact 14-TSSOP package. Its fast wake-up and low-power modes support duty-cycled sensing and control. Select a higher-memory or more highly integrated MSP430 when firmware, RAM buffers, communication channels, analog resources, or package pins exceed what this device provides.
How much current does the MSP430F2011TPW consume?
The MSP430F2011TPW uses 0.1 microamp in off mode with RAM retention, while its active-mode current at 1 MHz is identified by the manufacturer literature but is not stated in the product summary available for this page. Use the Texas Instruments datasheet's current-consumption table to select the applicable operating frequency and voltage. Design the power budget from measured duty cycle, including sensor, pull-up, regulator, and communication loads that may dominate total system consumption.
Where can I buy MSP430F2011TPW online?
Use the Request a Quote form on this page to request MSP430F2011TPW availability, lead time, and a current quotation. The manufacturer product page and distributor listing identify the exact 14-TSSOP ordering code, but commercial terms can change with inventory, volume, and production status. For recurring production, request the manufacturer-authorized ordering information and include your required delivery schedule and packing method in the quote request.
What is the lead time for MSP430F2011TPW?
The current MSP430F2011TPW lead time must be confirmed through the Request a Quote form on this page because it is not stated in the Texas Instruments product page or the distributor snippets. Include the annual usage, forecast horizon, packaging requirement, and approved source conditions when requesting a quotation. The manufacturer product page lists ordering and quality information that should be used to validate the final device designation.
Is MSP430F2011TPW in stock?
MSP430F2011TPW stock status should be requested through the Request a Quote form on this page rather than inferred from a distributor landing page. The Texas Instruments product page confirms the MSP430F2011 product family and provides ordering information, while live distributor availability can change independently of the component's lifecycle. For production planning, ask for dated stock, lead time, minimum order quantity, and traceability information matching the exact 14-TSSOP ordering code.
Is the MSP430F2011TPW RoHS compliant and lead-free?
The MSP430F2011TPW is identified as RoHS-compliant and lead-free in the component listing information for this exact MPN. According to the Texas Instruments product page, the MSP430F2011 is an active mixed-signal microcontroller family with an established ordering structure. REACH status, halogen-free classification, and conflict-minerals reporting are not stated in the available product information and should be confirmed through the manufacturer or the Request a Quote form before procurement.

Справочные инженерные данные для MSP430F2011TPW — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the MSP430F2011TPW when the design needs a compact 16-bit mixed-signal controller with 2 KB of Flash, 128 bytes of SRAM, ten I/O pins, a 16-bit timer, and an integrated analog comparator. Its 14-TSSOP package, five low-power modes, and sub-1-microsecond DCO wake-up are attractive for battery-powered sensing and portable control products. The MSP430F2011IPW is the closest identified alternative when its ordering code satisfies the required grade and packing format. MSP430F2011TN and MSP430F2011IN are additional same-family ordering options that retain the principal frequency, memory, and package characteristics. Confirm the complete ordering table before changing production parts. Choose a higher-memory MSP430 when firmware, buffers, communication peripherals, or analog resources exceed this device's capacity. No cross-brand drop-in replacement was verified, so a competitor device should be treated as a redesign unless pin, peripheral, and firmware compatibility are independently proven.

Сравнение с аналогами

Параметр Этот товар MSP430F2011IPW MSP430F2011TN MSP430F2011IN
Package 14-TSSOP 14-TSSOP - same 14-TSSOP - same 14-TSSOP - same
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
CPU Architecture 16-bit RISC 16-bit RISC 16-bit RISC 16-bit RISC
Maximum Clock Frequency 16 MHz 16 MHz 16 MHz 16 MHz
Flash Memory 2 KB 2 KB 2 KB 2 KB
SRAM 128 bytes 128 bytes 128 bytes 128 bytes
General-Purpose I/O Pins 10 pins 10 pins 10 pins 10 pins
Timer and Analog Comparator One 16-bit timer and one analog comparator One 16-bit timer and one analog comparator One 16-bit timer and one analog comparator One 16-bit timer and one analog comparator
Supply Voltage 2.2 V 2.2 V 2.2 V 2.2 V

Ключевые отличия

  • Combines a 16 MHz MCU with an integrated analog comparator (против MSP430F2011IPW)
  • Compact 14-TSSOP implementation with ten I/O pins (против MSP430F2011TN)
  • Fast active-mode recovery for duty-cycled control (против MSP430F2011IN)

Заметки по проектированию

Plan the MSP430F2011TPW power tree around its 2.2 V operating point and the load presented by the sensor, analog comparator network, and I/O circuitry. The MCU can remain in one of five low-power modes between events, with DCO wake-up in less than 1 microsecond, but external pull resistors and sensor devices can dominate total current. Select divider values that balance leakage against signal accuracy, and measure average supply current across the intended duty cycle rather than relying only on an operating-mode figure.

Use the manufacturer pin-configuration diagram when placing the 14-TSSOP footprint and check pin 1 orientation against the PCB silkscreen. Keep the decoupling capacitor path from the supply and ground pins as short as practical, and provide adequate ground return area around the device. Because the MSP430F2011 combines digital timing functions with an analog comparator, route comparator inputs away from clock, switching, and high-current return paths to reduce coupling into threshold measurements.

Do not select a substitute solely from the base device name. The MSP430F2011IPW, MSP430F2011TN, and MSP430F2011IN alternatives share the primary device ratings and 14-TSSOP format, but their ordering codes can encode grade and packing requirements. Verify the complete ordering table, temperature requirements, shipment format, and firmware target before changing a released BOM. Also confirm that the alternate flash identifier and device variant used by the toolchain matches the physical component.

Treat the integrated analog comparator as a precision input stage rather than a general-purpose logic receiver. Keep comparator input traces short, avoid sharing long paths with digital outputs, and use a quiet return reference for the sensor and divider network. If the input crosses a sensitive analog threshold, add filtering appropriate to the signal bandwidth rather than relying on firmware filtering alone. This separation is especially important when the MCU and a switching regulator operate on the same compact board.

Информация о соответствии

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Yes
Без галогенов
Unknown
Конфликтные минералы
Unknown

The exact-MPN component listing identifies RoHS-compliant, lead-free, and green construction. AEC-Q100 status, REACH status, halogen-free classification, and conflict-minerals reporting were not stated.

Данные проверены: 2026-11-20 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

MSP430F2011TPW datasheet MSP430F2011TPW pinout MSP430F2011TPW datasheet pdf MSP430F2011TPW equivalent MSP430F2011TPW replacement MSP430F2011TPW cross reference MSP430F2011TPW vs MSP430F2011IPW MSP430F2011TPW footprint MSP430F2011TPW price MSP430F2011TPW stock Texas Instruments MSP430F2011TPW MSP430F2011 14-TSSOP pinout

Связанные компоненты & термины

Texas Instruments MSP430F2011TPW MSP430F2011IPW MSP430F2011TN MSP430F2011IN MSP430F2011 MSP430F20xx MSP430 mixed-signal microcontroller 16-bit RISC architecture microcontroller embedded control ultra-low-power design digitally controlled oscillator DCO analog comparator 16-bit timer low-dropout regulator Flash memory SRAM 14-TSSOP TSSOP package family surface-mount package RoHS lead-free
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ