MSP430F2011TPW - 16MHz 2KB Flash MCU | Texas Instruments
MPN: MSP430F2011TPW ✓ פעילMSP430F2011TPW סקירה
An ultra-low-power mixed-signal microcontroller combines a digital processor with analog and timing resources on one device. The MSP430 architecture belongs to the microcontroller hierarchy and targets battery-powered or energy-conscious embedded systems, where fast wake-up, low standby consumption, and compact packaging can extend operating life. The MSP430F2011 is particularly useful when a product needs more control capability than a basic logic device but does not require a large memory footprint.
The MSP430F2011 operates at up to 16 MHz and provides 2 KB of Flash plus 128 bytes of SRAM. Its digitally controlled oscillator wakes the device from low-power mode to active mode in less than 1 microsecond. A 16-bit timer supports periodic and event-based control, while ten I/O pins allow interaction with sensors, switches, indicators, and external control logic. The integrated analog comparator supports threshold measurement and simple signal-conditioning tasks.
Internally, the device uses a 16-bit RISC architecture with a 125 ns minimum instruction-cycle time at its maximum operating frequency. Its low-power design includes five power-saving modes, standby wake-up in less than 6 microseconds, and off-mode RAM retention at approximately 0.1 microsecond. These characteristics let firmware remain dormant between events and respond quickly when measurement, control, or communication activity is required.
Typical applications include battery-powered sensors, compact industrial transducers, handheld instruments, low-power data loggers, and embedded control modules. The integrated comparator is useful for battery threshold detection, while the timer can establish fixed measurement intervals or generate control events without an additional timing IC. The 14-TSSOP package also supports space-constrained circuit boards where a larger quad flat package would be unnecessary.
Designers should review the device's power-supply limits, clock configuration, and I/O tolerances in the manufacturer datasheet before finalizing a PCB. Place decoupling capacitance close to the supply pins, route clock and sensitive analog inputs away from fast-switching nodes, and confirm unused I/O states during reset. Firmware development also depends on matching the programmed device variant and respecting the device family's memory and peripheral map.
This product overview combines the MSP430F2011TPW specifications, order-code alternatives, pin and package considerations, and practical low-power design guidance in a format that supports component selection, schematic review, firmware planning, and procurement.
חלופות תחליף ישיר עבור MSP430F2011TPW — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם MSP430F2011TPW (אותו גורם צורה וטביעת רגל) — שונים ב Package, Mounting Type, Product Type, Standby Wake-Up Time.
MSP430F2011IPW
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←MSP430F2011TN
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←MSP430F2011IN
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←MSP430F2011TPW דירוגים מרביים ומאפיינים חשמליים
| Architecture | 16-bit RISC |
| Product Type | Ultra-low-power mixed-signal microcontroller |
| תדר שעון מקסימלי | 16 MHz |
| Minimum Instruction Cycle Time | 125 ns |
| Flash Memory | 2 KB |
| Flash Organization | 2K x 8 |
| SRAM | 128 bytes |
| Additional Flash Region | 256 bytes |
| General-Purpose I/O Pins | 10 pins |
| Timer | 1 built-in 16-bit timer |
| Analog Comparator | 1 integrated analog comparator |
| DCO Wake-Up Time | Less than 1 us |
| Standby Wake-Up Time | Less than 6 us |
| Low-Power Modes | 5 modes |
| Off-Mode RAM Retention Current | 0.1 uA |
| מתח אספקה | 2.2 V |
| מארז | 14-TSSOP |
| סוג הרכבה | Surface mount |
| Temperature Grade | Industrial |
| סטטוס RoHS | Compliant |
| Lead-Free Status | Lead-free |
מדריך תצורת פינים של MSP430F2011TPW 14-tssop
תצורת פינים עבור MSP430F2011TPW (מארזת 14-tssop). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור MSP430F2011TPW.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
MSP430F2011TPW מתאים עבור 6 יישוםs: Battery-Powered Threshold Sensor, Compact Industrial Transducer, Low-Power Data Logger, Handheld Measurement Instrument, Smart Home Sensor Node, Portable Control Module.
Battery-Powered Threshold Sensor
The MSP430F2011TPW fits battery-powered threshold sensing because its integrated analog comparator can evaluate an analog input while the 16-bit CPU remains in a low-power state. The comparator provides a practical path for detecting battery level, resistive sensor thresholds, or simple external signals without requiring a separate comparator IC. Its less-than-1-microsecond DCO wake-up allows firmware to respond rapidly to an interrupt, while five low-power modes support long idle intervals. The design must still account for divider leakage, comparator settling, and the current drawn by the sensor network.
מומלץ
Compact Industrial Transducer
The MSP430F2011TPW is appropriate for compact industrial transducers that combine a sensor input with a local timer and simple control outputs. Ten I/O pins provide connections for digital sensors, alarm signals, status indicators, and actuator drivers, while the 16-bit timer supports periodic sampling or deterministic control intervals. Its 14-TSSOP package reduces board area compared with a larger controller, and the 16 MHz CPU provides useful headroom for signal conditioning and state management. Industrial designs should verify the exact temperature grade and use appropriate input protection.
מומלץ
Low-Power Data Logger
The MSP430F2011TPW supports low-power data logging when measurements can be acquired and stored in a compact buffer before a slower transfer interval. The 128-byte SRAM can hold volatile samples, while 2 KB of Flash provides space for firmware and limited nonvolatile records. Less-than-1-microsecond active-mode wake-up helps the device react promptly to scheduled or external events, and the timer provides a convenient basis for periodic sampling. Long-term logging requires careful attention to flash write endurance and the energy consumed by the external sensor and communications hardware.
מומלץ
Handheld Measurement Instrument
The MSP430F2011TPW is useful in handheld measurement instruments where a small display, sensor, and control interface must operate from limited energy. Its integrated comparator can support thresholding or range detection, while the 16-bit timer can establish measurement timing and UI update intervals. The 14-TSSOP package leaves board space for the sensor, regulator, and user controls, and the processor's fast wake-up allows the instrument to sleep between operator actions. Firmware should suspend unused peripherals and account for display and sensor loads when estimating battery life.
מומלץ
Smart Home Sensor Node
The MSP430F2011TPW can serve as a smart-home sensor node that wakes for a measurement, evaluates a threshold, and returns to sleep. Its ten I/O pins are sufficient for a compact node using switches, a digital sensor, and status indicators, while the integrated analog comparator reduces the need for additional signal-conditioning hardware. Low-power operation is central to the application because the node may rely on batteries or energy harvesting. Communication energy, regulator quiescent current, and the duration of each active cycle will usually dominate the overall power budget.
מומלץ
Portable Control Module
The MSP430F2011TPW fits portable control modules that require timed outputs, flexible digital I/O, and rapid recovery from sleep. The 16-bit timer can generate precision delays, PWM-related timing, or sampling intervals, and the ten I/O pins can interface with pushbuttons, indicators, and discrete actuators. A 14-TSSOP footprint supports dense portable products, while 16 MHz operation is ample for straightforward control logic. Output drive limits, supply range, and timing tolerance should be checked against the connected load before schematic approval.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור MSP430F2011TPW — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | MSP430F2011IPW | MSP430F2011TN | MSP430F2011IN |
|---|---|---|---|---|
| Package | 14-TSSOP | 14-TSSOP - same | 14-TSSOP - same | 14-TSSOP - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| CPU Architecture | 16-bit RISC | 16-bit RISC | 16-bit RISC | 16-bit RISC |
| Maximum Clock Frequency | 16 MHz | 16 MHz | 16 MHz | 16 MHz |
| Flash Memory | 2 KB | 2 KB | 2 KB | 2 KB |
| SRAM | 128 bytes | 128 bytes | 128 bytes | 128 bytes |
| General-Purpose I/O Pins | 10 pins | 10 pins | 10 pins | 10 pins |
| Timer and Analog Comparator | One 16-bit timer and one analog comparator | One 16-bit timer and one analog comparator | One 16-bit timer and one analog comparator | One 16-bit timer and one analog comparator |
| Supply Voltage | 2.2 V | 2.2 V | 2.2 V | 2.2 V |
מבדילים עיקריים
- Combines a 16 MHz MCU with an integrated analog comparator (לעומתMSP430F2011IPW)
- Compact 14-TSSOP implementation with ten I/O pins (לעומתMSP430F2011TN)
- Fast active-mode recovery for duty-cycled control (לעומתMSP430F2011IN)
הערות תכנון
Plan the MSP430F2011TPW power tree around its 2.2 V operating point and the load presented by the sensor, analog comparator network, and I/O circuitry. The MCU can remain in one of five low-power modes between events, with DCO wake-up in less than 1 microsecond, but external pull resistors and sensor devices can dominate total current. Select divider values that balance leakage against signal accuracy, and measure average supply current across the intended duty cycle rather than relying only on an operating-mode figure.
Use the manufacturer pin-configuration diagram when placing the 14-TSSOP footprint and check pin 1 orientation against the PCB silkscreen. Keep the decoupling capacitor path from the supply and ground pins as short as practical, and provide adequate ground return area around the device. Because the MSP430F2011 combines digital timing functions with an analog comparator, route comparator inputs away from clock, switching, and high-current return paths to reduce coupling into threshold measurements.
Do not select a substitute solely from the base device name. The MSP430F2011IPW, MSP430F2011TN, and MSP430F2011IN alternatives share the primary device ratings and 14-TSSOP format, but their ordering codes can encode grade and packing requirements. Verify the complete ordering table, temperature requirements, shipment format, and firmware target before changing a released BOM. Also confirm that the alternate flash identifier and device variant used by the toolchain matches the physical component.
Treat the integrated analog comparator as a precision input stage rather than a general-purpose logic receiver. Keep comparator input traces short, avoid sharing long paths with digital outputs, and use a quiet return reference for the sensor and divider network. If the input crosses a sensitive analog threshold, add filtering appropriate to the signal bandwidth rather than relying on firmware filtering alone. This separation is especially important when the MCU and a switching regulator operate on the same compact board.
מידע על תאימות
The exact-MPN component listing identifies RoHS-compliant, lead-free, and green construction. AEC-Q100 status, REACH status, halogen-free classification, and conflict-minerals reporting were not stated.