Texas Instruments

MSP430F5419IPZ - 25MHz 16-Bit Mixed-Signal MCU | Texas Instruments

Артикул: MSP430F5419IPZ ✓ Активен
2.4 V to 3.6 V Vdss 180 uA/MHz Id 100-pin LQFP, 14 x 14 mm Package 25 MHz Speed 128 KB Memory
MOQ: 1 |

MSP430F5419IPZ Обзор

Texas Instruments MSP430F5419IPZ is a 25 MHz, 16-bit RISC mixed-signal microcontroller with 128 KB of Flash memory, 16 KB of SRAM, and a 12-bit ADC, housed in a 100-pin LQFP package measuring 14 x 14 mm. It integrates DMA, UART, SPI, I2C, timers, and a hardware multiplier for compact embedded control and sensor-processing systems.

A microcontroller is a programmable semiconductor that combines a CPU core, memory, peripheral interfaces, and I/O in one device. The MSP430F5419 belongs to the mixed-signal microcontroller category and extends to embedded controller, low-power mixed-signal IC, and semiconductor hierarchies. Its architecture is intended to provide efficient code execution while combining digital control functions with an integrated analog-to-digital converter.

Principal device features include a maximum clock frequency of 25 MHz, 128 KB of Flash program memory, and 16 KB of SRAM. The integrated 12-bit ADC supports analog measurement, while DMA reduces the processing burden associated with moving data between peripherals and memory. UART, SPI, and I2C interfaces support industrial sensors, external converters, transceivers, and compact serial buses without requiring separate interface controllers.

The MSP430 CPU architecture uses 16-bit registers and constant generators to improve code efficiency for embedded workloads. Its mixed-signal feature set allows a single device to control actuators, process sensor inputs, and communicate with external equipment. Hardware multiplication accelerates common arithmetic operations, while timers support periodic events, timing requirements, and industrial control sequencing.

Typical applications include industrial sensor controllers, building and automation equipment, metering systems, connected instruments, and low-power embedded control nodes. The combination of 128 KB Flash, 16 KB SRAM, and multiple serial interfaces is particularly useful when firmware, data buffering, and host communication must coexist on a single board.

PCB implementation should preserve clean analog and digital return paths around the ADC circuitry. Follow the pin-description table and application guidance in the manufacturer datasheet when assigning power, ground, decoupling, and analog-input tracks. Confirm the exact package drawing, exposed thermal requirements, and supported operating temperature before releasing the PCB layout.

This page combines the manufacturer device specifications with engineering-oriented selection guidance, package details, and practical design considerations. It is intended to help engineers verify memory, clock, analog, interface, and thermal requirements before integrating the MSP430F5419IPZ into a mixed-signal embedded product.

Аналоги без доработки для MSP430F5419IPZ — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с MSP430F5419IPZ (тот же форм-фактор и посадочное место) — отличается по Hardware Multiplier, Package, Timers, ADC Resolution, DMA.

Texas Instruments
Hardware Multiplier: 32-bit
Package: 100-pin LQFP (14x14 mm)
Timers: Timer_A and Timer_B
Сравнить с MSP430F5419IPZ →
Texas Instruments
Hardware Multiplier: 32-bit hardware multiplier
Package: 100-LQFP (14 x 14 mm)
Timers: 16-bit timer resources
Сравнить с MSP430F5419IPZ →

MSP430F5419AIPZ

✅ Прямая замена ⚠️ Характеристики не проверены
📦 100-pin LQFP (14 x 14 mm)
Related MSP430F5419-family revision with the same stated 25 MHz clock, 128 KB Flash, 16 KB SRAM, 12-bit ADC, and core interface set; confirm device revision and pin compatibility before substitution

📋 Справочный аналог (нет в каталоге)

MSP430F5438IPZ

✅ Прямая замена ⚠️ Характеристики не проверены
Texas Instruments
📦 100-pin LQFP (14 x 14 mm)
16-bit ultra-low-power mixed-signal microcontroller · MSP430 16-bit RISC · 25 MHz · 18 MHz · 256 KB · 16 KB · 12-bit · 32-bit hardware multiplier

Уточнить цену

Открыть даташит →

MSP430F5438AIPZ

✅ Прямая замена ⚠️ Характеристики не проверены
Texas Instruments
📦 100-pin LQFP (14 x 14 mm)
MSP430 CPUXV2 (16-bit RISC) · 25 MHz · 256 KB (256K x 8) · 16 KB · 12-bit SAR, 14 channels · 4 · 32-bit · 87

Уточнить цену

Открыть даташит →

MSP430F5436IPZ

✅ Прямая замена ⚠️ Характеристики не проверены
📦 100-pin LQFP (14 x 14 mm)
Related MSP430F543x mixed-signal MCU with a comparable 25 MHz-class architecture and 100-pin LQFP option; ADC, timer, interface, and pin assignments require validation

📋 Справочный аналог (нет в каталоге)

MSP430F5437IPZ

✅ Прямая замена ⚠️ Характеристики не проверены
📦 100-pin LQFP (14 x 14 mm)
Related MSP430F543x mixed-signal MCU with a comparable 25 MHz-class architecture and 100-pin LQFP option; peripheral counts and application-specific functions may differ

📋 Справочный аналог (нет в каталоге)

MSP430F5419IPZ Максимальные параметры и электрические характеристики

Product Type 16-bit RISC mixed-signal microcontroller
Максимальная тактовая частота 25 MHz
Flash Memory 128 KB
SRAM 16 KB
ADC Resolution 12 bit
Supply Voltage Range 2.4 V to 3.6 V
I/O Port Count 31 ports
CPU Register Width 16 bit
DMA Integrated
UART Interface Integrated
SPI Interface Integrated
I2C Interface Integrated
Timers Integrated
Hardware Multiplier Integrated
Корпус 100-pin LQFP, 14 x 14 mm
Тип монтажа Surface mount
Active Mode Current 180 uA/MHz
Reflow Standard JEDEC J-STD-020

Руководство по цоколевке MSP430F5419IPZ в корпусе 100-pin lqfp, 14 x 14 mm

Цоколевка для MSP430F5419IPZ (корпус 100-pin lqfp, 14 x 14 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса 100-pin lqfp, 14 x 14 mm для MSP430F5419IPZ

Нет подробных данных о распиновке для MSP430F5419IPZ.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

MSP430F5419IPZ подходит для 6 применениеs: Industrial Sensor Controllers, Building Automation Equipment, Connected Energy Meters, Portable Measurement Instruments, Data Acquisition Systems, Low-Power IoT Sensor Nodes.

🏭

Industrial Sensor Controllers

The MSP430F5419IPZ fits industrial sensor controllers that combine analog measurement with local control and serial communications. Its 12-bit ADC supports sensor conditioning, while 128 KB of Flash and 16 KB of SRAM provide room for calibration data, filtering, diagnostics, and communication firmware. UART, SPI, and I2C allow the same controller to service local sensors and interface with a host or actuator. The mixed-signal architecture reduces board count, while DMA can move sampled data with limited CPU intervention. For industrial deployments, protect analog inputs from transients and verify the complete operating-temperature and isolation requirements.

🏭

Building Automation Equipment

The MSP430F5419IPZ is appropriate for building-automation nodes that monitor environmental inputs and operate local relays or actuators. The 12-bit ADC can measure analog sensor conditions, while the 16-bit CPU and hardware multiplier support control calculations. Its integrated UART, SPI, and I2C peripherals simplify connections to communication transceivers, sensor hubs, and display or identification modules. With 128 KB of Flash and 16 KB of SRAM, the device can maintain firmware, configuration data, and communication buffers on a single controller. Select an appropriate low-power strategy so that the node remains responsive while minimizing energy use during idle periods.

⚡

Connected Energy Meters

The MSP430F5419IPZ suits connected metering equipment requiring analog acquisition, event handling, and reliable data transfer. The 12-bit ADC supports measurement channels, DMA can improve data-movement efficiency, and the 128 KB of Flash accommodates protocol stacks and metering logic. UART provides a straightforward host or communications link, while SPI and I2C can connect display, memory, or sensor peripherals. The 16 KB SRAM provides working space for temporary measurement and communication data. For revenue-grade metering, evaluate calibration architecture, safety requirements, and applicable industry standards separately; the MCU specifications alone do not establish regulatory compliance.

🖥️

Portable Measurement Instruments

The MSP430F5419IPZ can serve as the control core of a portable measurement instrument because it combines ADC acquisition, processing, memory, and communications in a 100-pin LQFP package. The 25 MHz maximum clock supports responsive sampling and signal processing, while 128 KB of Flash and 16 KB of SRAM accommodate application code and measurement buffers. UART, SPI, and I2C permit connection to displays, external memories, sensors, and laboratory interfaces. Power-management design should select the appropriate active or low-power mode based on battery capacity and workload. Validate analog accuracy, input bandwidth, reference stability, and calibration requirements with the complete signal chain.

📺

Data Acquisition Systems

The MSP430F5419IPZ supports compact data-acquisition systems where analog inputs must be digitized and transferred without a separate processor. Its integrated 12-bit ADC handles sensor-level measurements, and DMA reduces CPU intervention during transfers. The hardware multiplier assists common scaling and filtering arithmetic, while the 16-bit CPU manages acquisition sequencing and protocol handling. SPI and I2C provide connections to external converters, memories, and sensors, and UART supports configuration or data transfer to a host. Board-level signal-integrity work is essential: keep analog traces short, maintain a stable reference, separate noisy digital return paths, and follow the datasheet grounding recommendations.

🧩

Low-Power IoT Sensor Nodes

The MSP430F5419IPZ is suitable for IoT sensor nodes that need local analog processing, multiple bus connections, and substantial firmware in a small controller. Its 25 MHz CPU provides useful processing headroom, while 128 KB of Flash and 16 KB of SRAM support protocol code, sensor drivers, and buffering. The 12-bit ADC performs local measurements, and UART, SPI, and I2C connect radios and sensors without requiring several discrete interface devices. A listed active current of 180 uA/MHz and standby current of 180 uA/MHz at 3 V support power-conscious design, although actual consumption depends on duty cycle, peripherals, and operating mode. Confirm radio coexistence and antenna layout separately.

Сводка рекомендуемых товаров

MSP430F5419 Same-device family reference Используется в: Industrial Sensor Controllers, Building Automation Equipment, Portable Measurement Instruments, Low-Power IoT Sensor Nodes MSP430F5419A Related device revision Используется в: Industrial Sensor Controllers, Connected Energy Meters MSP430F5438IPZ Texas Instruments Используется в: Building Automation Equipment, Low-Power IoT Sensor Nodes MSP430F5437IPZ Related mixed-signal MCU Используется в: Connected Energy Meters MSP430F5436IPZ Related mixed-signal MCU Используется в: Portable Measurement Instruments MSP430F5419AIPZ Related device revision Используется в: Data Acquisition Systems MSP430F5438AIPZ Texas Instruments Используется в: Data Acquisition Systems
What are the key specifications of MSP430F5419IPZ that engineers should know?
The MSP430F5419IPZ is a 25 MHz, 16-bit mixed-signal microcontroller with 128 KB of Flash, 16 KB of SRAM, a 12-bit ADC, DMA, UART, SPI, I2C, timers, and a hardware multiplier. According to the Texas Instruments MSP430F5419 product page, these resources support compact embedded control designs with substantial firmware storage, dedicated analog conversion, and multiple communication interfaces. The device is packaged in a 100-pin LQFP measuring 14 x 14 mm.
What is the operating voltage range of MSP430F5419IPZ?
The MSP430F5419IPZ operates from 2.4 V to 3.6 V. This range supports both 2.5 V and 3.3 V system rails while giving the design additional margin around the nominal operating points. The Texas Instruments MSP430F543x and MSP430F541x mixed-signal microcontroller datasheet should be consulted for operating conditions, DC characteristics, and power-supply sequencing requirements before the device is used in a new board design.
How much Flash and SRAM does MSP430F5419IPZ have?
The MSP430F5419IPZ provides 128 KB of Flash memory and 16 KB of SRAM. The Texas Instruments product page identifies these capacities as key resources for the device. Flash stores the application firmware, while SRAM supports stack space, working variables, buffers, and DMA transfers. These figures make the controller suitable for connected instruments and industrial sensor nodes that need more program storage than a basic low-power microcontroller.
Does MSP430F5419IPZ contain an ADC?
Yes, the MSP430F5419IPZ includes a 12-bit ADC. The Texas Instruments device page lists the converter as part of the mixed-signal feature set, alongside 128 KB of Flash, 16 KB of SRAM, DMA, UART, SPI, I2C, timers, and a hardware multiplier. The ADC allows analog inputs to be measured without a separate converter, provided the board follows the datasheet guidance for analog routing, reference voltage, and grounding.
Where can I download the MSP430F5419IPZ datasheet PDF?
The MSP430F5419IPZ datasheet is available from the Texas Instruments MSP430F5419 product page and the official mixed-signal microcontroller datasheet link. The manufacturer document covers the MSP430F543x and MSP430F541x families and includes ordering information, electrical characteristics, package details, and application guidance. Use the manufacturer copy for design work because it is the authoritative source for pin functions, timing, limits, and revision-specific behavior.
Where can I find the MSP430F5419IPZ pinout and package drawing?
The MSP430F5419IPZ pinout and mechanical drawing are located in the pin-description and package sections of the Texas Instruments MSP430F543x and MSP430F541x datasheet. The device uses a 100-pin LQFP package measuring 14 x 14 mm. When assigning PCB tracks, verify every signal against the ordering-information table because package suffixes distinguish ordering variants, while board footprints must also satisfy the package drawing dimensions and soldering recommendations.
Where can I buy MSP430F5419IPZ online?
Use the Request a Quote form on this page to request MSP430F5419IPZ availability, quantity breaks, current lead time, and packaging requirements. The exact MPN is Texas Instruments MSP430F5419IPZ in a 100-pin LQFP package. A sourcing review should confirm the package suffix, tray or reel requirement, operating-temperature grade, and quantity needed so that the quotation matches the intended PCB and production plan.
What is the price of MSP430F5419IPZ?
Current MSP430F5419IPZ pricing is obtained through the Request a Quote form on this page. The quote can reflect the requested quantity, package shipment format, and any scheduled production requirements. Before ordering, confirm that the quote identifies the exact MSP430F5419IPZ MPN and the same 100-pin LQFP configuration intended for the assembled PCB, avoiding ambiguity with related MSP430F541x devices.
What is the lead time for MSP430F5419IPZ?
Submit the required quantity and shipment format through the Request a Quote form on this page to obtain the current lead time for MSP430F5419IPZ. Lead time can depend on order volume, packaging choice, component availability, and production scheduling. Include the target build dates in the request so that procurement can assess whether the schedule matches the product schedule without relying on a generic availability statement.
Is MSP430F5419IPZ in stock?
Request current MSP430F5419IPZ stock status through the Request a Quote form on this page. The request should state the required quantity and whether the device is needed in tray or reel packaging for automated assembly. The exact orderable configuration is Texas Instruments MSP430F5419IPZ in the 100-pin LQFP package, and the returned availability should be treated as the basis for the production schedule.
What is the difference between MSP430F5419IPZ and MSP430F5419AIPZ?
MSP430F5419AIPZ is a related Texas Instruments orderable variant in the same MSP430F541x family, while MSP430F5419IPZ is the exact MPN identified on this page. The manufacturer product pages list both as 25 MHz devices with 128 KB Flash, 16 KB SRAM, a 12-bit ADC, DMA, UART, SPI, I2C, timers, and a hardware multiplier. Final replacement use should still be checked against package, pin, device revision, and qualification requirements.
When should I choose MSP430F5419IPZ over MSP430F5438IPZ?
Choose MSP430F5419IPZ when the design requires its specific MSP430F5419 configuration and 100-pin LQFP implementation. Choose an MSP430F5438-family device instead when its verified peripheral set better matches the product requirements. Both families provide a 25 MHz-class architecture with substantial Flash and SRAM, but they are not automatically interchangeable because ADC resources, serial interfaces, timers, and pin-level capabilities must be compared against the board schematic.
Can MSP430F5438IPZ replace MSP430F5419IPZ?
MSP430F5438IPZ can be considered only after a complete pin and peripheral comparison confirms compatibility with the installed PCB. It is a related Texas Instruments mixed-signal MCU family member with a comparable 25 MHz performance class and 100-pin LQFP option, but the exact MSP430F5419IPZ footprint must be checked for every power, ground, analog, and communication connection. Validate firmware, interrupt mapping, ADC channels, timers, and DMA requirements before approving the substitution.
What can replace MSP430F5419IPZ?
The strongest replacement candidate is a qualified member of the Texas Instruments MSP430F541x or MSP430F543x family with the same 100-pin LQFP footprint and the required peripheral assignments. No cross-manufacturer drop-in replacement is established by the available manufacturer and cross-reference information. Treat MSP430F5419AIPZ, MSP430F5438IPZ, and related family options as redesign-review candidates rather than automatic substitutes until their complete pin and electrical characteristics match.
Is MSP430F5419IPZ suitable for low-power sensor applications?
Yes, MSP430F5419IPZ is suitable for low-power mixed-signal sensing because it combines a 12-bit ADC, 16-bit CPU, 128 KB Flash, 16 KB SRAM, DMA, and multiple serial interfaces in one device. A listed standby current is 180 uA/MHz at 3 V, while the manufacturer identifies an active current of 180 uA/MHz. Actual battery life depends on the selected low-power mode, sampling rate, sensor load, duty cycle, and time spent in active processing.
What standards and environmental qualifications apply to MSP430F5419IPZ?
The MSP430F543x and MSP430F541x datasheet states that higher temperatures may be applied during board soldering according to JEDEC J-STD-020, with peak reflow temperature not exceeding the classification shown on the device label. RoHS, REACH, AEC-Q100 qualification, halogen-free status, and the exact operating-temperature range require separate confirmation from the manufacturer product documentation. Do not infer automotive qualification from the industrial ordering suffix alone.

Справочные инженерные данные для MSP430F5419IPZ — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose MSP430F5419IPZ when the design specifically requires the MSP430F5419 configuration, 128 KB of Flash, 16 KB of SRAM, a 12-bit ADC, DMA, and UART, SPI, and I2C interfaces in a 100-pin LQFP package. It is well aligned with industrial sensing, building automation, metering, and connected instrument designs where mixed-signal measurement and local processing share one controller. Consider MSP430F5419AIPZ when its revision status is acceptable and the exact ordering configuration can be confirmed. Use MSP430F5438IPZ or MSP430F5438AIPZ when their verified peripheral resources provide a better functional match, but validate every pin and firmware dependency. MSP430F5436IPZ and MSP430F5437IPZ are secondary family options whose ADC channels, timers, and interfaces must be compared with the target schematic. None of these related devices should be treated as an automatic substitute without a complete electrical, pin, and software review.

Сравнение с аналогами

Параметр Этот товар MSP430F5419AIPZ MSP430F5438IPZ MSP430F5438AIPZ MSP430F5436IPZ MSP430F5437IPZ
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 100-pin LQFP (14 x 14 mm) 100-pin LQFP (14 x 14 mm) 100-pin LQFP (14 x 14 mm) 100-pin LQFP (14 x 14 mm) 100-pin LQFP (14 x 14 mm) 100-pin LQFP (14 x 14 mm)

Ключевые отличия

  • Direct MSP430F5419-family configuration (против MSP430F5438IPZ)
  • Defined analog conversion resolution (против MSP430F5419AIPZ)
  • Integrated mixed-signal resource set (против MSP430F5436IPZ)

Заметки по проектированию

Route the ADC input and reference network away from switching nodes, clock edges, and high-current return paths. Begin with the pin-description table and mixed-signal layout guidance in the manufacturer datasheet, then assign analog ground and digital ground connections according to the recommended topology. Keep the analog input traces short, minimize loop area around the converter, and place protection or filtering components where they do not add excessive parasitic capacitance to sensitive channels.

Design the supply network for the 2.4 V to 3.6 V operating range while accounting for transient load changes from the CPU, ADC, timers, and communication peripherals. Place the required decoupling capacitors close to their associated power and ground pins, use short ground-return paths, and verify startup behavior across the complete voltage range. If analog performance is sensitive to supply variation, evaluate the reference circuit independently and follow the datasheet recommendations for filtering and grounding.

Do not approve an MSP430F5419-family substitution based only on clock speed and package size. Compare every power pin, ground pin, ADC input, reference connection, reset signal, and serial interface against the installed schematic. Also review interrupt vectors, DMA channels, timer assignments, and startup firmware because related family members can have different peripheral counts or revisions even when they use the same LQFP outline.

Estimated: use the maximum operating ambient temperature, package thermal data, and the calculated device dissipation to determine whether a thermal pad, exposed pad, or copper area is required. Actual junction temperature depends on the PCB stackup, copper coverage, airflow, and adjacent heat sources, so a package outline alone is insufficient. Validate the assembled design with temperature-rise measurements and preserve the manufacturer-recommended land pattern for reliable assembly.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The manufacturer datasheet references JEDEC J-STD-020 for board-soldering reflow classification. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not established for this exact ordering configuration.

Данные проверены: 2026-11-15 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

MSP430F5419IPZ datasheet MSP430F5419IPZ datasheet pdf MSP430F5419IPZ pinout MSP430F5419IPZ equivalent MSP430F5419IPZ replacement MSP430F5419IPZ footprint MSP430F5419IPZ price MSP430F5419IPZ stock Texas Instruments MSP430F5419IPZ MSP430F5419IPZ vs MSP430F5438IPZ MSP430F5419 12-bit ADC controller MSP430F5419 100-pin LQFP

Связанные компоненты & термины

Texas Instruments MSP430F5419IPZ MSP430F5419AIPZ MSP430F5438IPZ MSP430F5438AIPZ MSP430F5436IPZ MSP430F5437IPZ MSP430 CPU mixed-signal microcontroller embedded controller 16-bit RISC 12-bit ADC 128 KB Flash 16 KB SRAM DMA UART SPI I2C hardware multiplier LQFP-100 surface mount JEDEC J-STD-020 industrial sensor controller low-power embedded control
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ