MSP430F5419IPZ - 25MHz 16-Bit Mixed-Signal MCU | Texas Instruments
料号: MSP430F5419IPZ ✓ 量产中MSP430F5419IPZ 概述
A microcontroller is a programmable semiconductor that combines a CPU core, memory, peripheral interfaces, and I/O in one device. The MSP430F5419 belongs to the mixed-signal microcontroller category and extends to embedded controller, low-power mixed-signal IC, and semiconductor hierarchies. Its architecture is intended to provide efficient code execution while combining digital control functions with an integrated analog-to-digital converter.
Principal device features include a maximum clock frequency of 25 MHz, 128 KB of Flash program memory, and 16 KB of SRAM. The integrated 12-bit ADC supports analog measurement, while DMA reduces the processing burden associated with moving data between peripherals and memory. UART, SPI, and I2C interfaces support industrial sensors, external converters, transceivers, and compact serial buses without requiring separate interface controllers.
The MSP430 CPU architecture uses 16-bit registers and constant generators to improve code efficiency for embedded workloads. Its mixed-signal feature set allows a single device to control actuators, process sensor inputs, and communicate with external equipment. Hardware multiplication accelerates common arithmetic operations, while timers support periodic events, timing requirements, and industrial control sequencing.
Typical applications include industrial sensor controllers, building and automation equipment, metering systems, connected instruments, and low-power embedded control nodes. The combination of 128 KB Flash, 16 KB SRAM, and multiple serial interfaces is particularly useful when firmware, data buffering, and host communication must coexist on a single board.
PCB implementation should preserve clean analog and digital return paths around the ADC circuitry. Follow the pin-description table and application guidance in the manufacturer datasheet when assigning power, ground, decoupling, and analog-input tracks. Confirm the exact package drawing, exposed thermal requirements, and supported operating temperature before releasing the PCB layout.
This page combines the manufacturer device specifications with engineering-oriented selection guidance, package details, and practical design considerations. It is intended to help engineers verify memory, clock, analog, interface, and thermal requirements before integrating the MSP430F5419IPZ into a mixed-signal embedded product.
直接替换替代料: MSP430F5419IPZ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: MSP430F5419IPZ (相同外形与封装尺寸) ——差异在于 Hardware Multiplier, Package, Timers, ADC Resolution, DMA.
MSP430F5419AIPZ
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
MSP430F5438IPZ
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →MSP430F5438AIPZ
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →MSP430F5436IPZ
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
MSP430F5437IPZ
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
MSP430F5419IPZ 最大额定值与电气特性
| Product Type | 16-bit RISC mixed-signal microcontroller |
| 最大时钟频率 | 25 MHz |
| Flash Memory | 128 KB |
| SRAM | 16 KB |
| ADC Resolution | 12 bit |
| Supply Voltage Range | 2.4 V to 3.6 V |
| I/O Port Count | 31 ports |
| CPU Register Width | 16 bit |
| DMA | Integrated |
| UART Interface | Integrated |
| SPI Interface | Integrated |
| I2C Interface | Integrated |
| Timers | Integrated |
| Hardware Multiplier | Integrated |
| 封装 | 100-pin LQFP, 14 x 14 mm |
| 安装类型 | Surface mount |
| Active Mode Current | 180 uA/MHz |
| Reflow Standard | JEDEC J-STD-020 |
MSP430F5419IPZ 100-pin lqfp, 14 x 14 mm 引脚配置指南
MSP430F5419IPZ(100-pin lqfp, 14 x 14 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: MSP430F5419IPZ.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MSP430F5419IPZ 适用于 6 应用s: Industrial Sensor Controllers, Building Automation Equipment, Connected Energy Meters, Portable Measurement Instruments, Data Acquisition Systems, Low-Power IoT Sensor Nodes.
Industrial Sensor Controllers
The MSP430F5419IPZ fits industrial sensor controllers that combine analog measurement with local control and serial communications. Its 12-bit ADC supports sensor conditioning, while 128 KB of Flash and 16 KB of SRAM provide room for calibration data, filtering, diagnostics, and communication firmware. UART, SPI, and I2C allow the same controller to service local sensors and interface with a host or actuator. The mixed-signal architecture reduces board count, while DMA can move sampled data with limited CPU intervention. For industrial deployments, protect analog inputs from transients and verify the complete operating-temperature and isolation requirements.
推荐
Building Automation Equipment
The MSP430F5419IPZ is appropriate for building-automation nodes that monitor environmental inputs and operate local relays or actuators. The 12-bit ADC can measure analog sensor conditions, while the 16-bit CPU and hardware multiplier support control calculations. Its integrated UART, SPI, and I2C peripherals simplify connections to communication transceivers, sensor hubs, and display or identification modules. With 128 KB of Flash and 16 KB of SRAM, the device can maintain firmware, configuration data, and communication buffers on a single controller. Select an appropriate low-power strategy so that the node remains responsive while minimizing energy use during idle periods.
推荐
Connected Energy Meters
The MSP430F5419IPZ suits connected metering equipment requiring analog acquisition, event handling, and reliable data transfer. The 12-bit ADC supports measurement channels, DMA can improve data-movement efficiency, and the 128 KB of Flash accommodates protocol stacks and metering logic. UART provides a straightforward host or communications link, while SPI and I2C can connect display, memory, or sensor peripherals. The 16 KB SRAM provides working space for temporary measurement and communication data. For revenue-grade metering, evaluate calibration architecture, safety requirements, and applicable industry standards separately; the MCU specifications alone do not establish regulatory compliance.
推荐
Portable Measurement Instruments
The MSP430F5419IPZ can serve as the control core of a portable measurement instrument because it combines ADC acquisition, processing, memory, and communications in a 100-pin LQFP package. The 25 MHz maximum clock supports responsive sampling and signal processing, while 128 KB of Flash and 16 KB of SRAM accommodate application code and measurement buffers. UART, SPI, and I2C permit connection to displays, external memories, sensors, and laboratory interfaces. Power-management design should select the appropriate active or low-power mode based on battery capacity and workload. Validate analog accuracy, input bandwidth, reference stability, and calibration requirements with the complete signal chain.
推荐
Data Acquisition Systems
The MSP430F5419IPZ supports compact data-acquisition systems where analog inputs must be digitized and transferred without a separate processor. Its integrated 12-bit ADC handles sensor-level measurements, and DMA reduces CPU intervention during transfers. The hardware multiplier assists common scaling and filtering arithmetic, while the 16-bit CPU manages acquisition sequencing and protocol handling. SPI and I2C provide connections to external converters, memories, and sensors, and UART supports configuration or data transfer to a host. Board-level signal-integrity work is essential: keep analog traces short, maintain a stable reference, separate noisy digital return paths, and follow the datasheet grounding recommendations.
推荐
Low-Power IoT Sensor Nodes
The MSP430F5419IPZ is suitable for IoT sensor nodes that need local analog processing, multiple bus connections, and substantial firmware in a small controller. Its 25 MHz CPU provides useful processing headroom, while 128 KB of Flash and 16 KB of SRAM support protocol code, sensor drivers, and buffering. The 12-bit ADC performs local measurements, and UART, SPI, and I2C connect radios and sensors without requiring several discrete interface devices. A listed active current of 180 uA/MHz and standby current of 180 uA/MHz at 3 V support power-conscious design, although actual consumption depends on duty cycle, peripherals, and operating mode. Confirm radio coexistence and antenna layout separately.
推荐
推荐产品汇总
工程参考数据: MSP430F5419IPZ ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MSP430F5419AIPZ | MSP430F5438IPZ | MSP430F5438AIPZ | MSP430F5436IPZ | MSP430F5437IPZ |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) |
关键差异点
- Direct MSP430F5419-family configuration (对比 MSP430F5438IPZ)
- Defined analog conversion resolution (对比 MSP430F5419AIPZ)
- Integrated mixed-signal resource set (对比 MSP430F5436IPZ)
设计说明
Route the ADC input and reference network away from switching nodes, clock edges, and high-current return paths. Begin with the pin-description table and mixed-signal layout guidance in the manufacturer datasheet, then assign analog ground and digital ground connections according to the recommended topology. Keep the analog input traces short, minimize loop area around the converter, and place protection or filtering components where they do not add excessive parasitic capacitance to sensitive channels.
Design the supply network for the 2.4 V to 3.6 V operating range while accounting for transient load changes from the CPU, ADC, timers, and communication peripherals. Place the required decoupling capacitors close to their associated power and ground pins, use short ground-return paths, and verify startup behavior across the complete voltage range. If analog performance is sensitive to supply variation, evaluate the reference circuit independently and follow the datasheet recommendations for filtering and grounding.
Do not approve an MSP430F5419-family substitution based only on clock speed and package size. Compare every power pin, ground pin, ADC input, reference connection, reset signal, and serial interface against the installed schematic. Also review interrupt vectors, DMA channels, timer assignments, and startup firmware because related family members can have different peripheral counts or revisions even when they use the same LQFP outline.
Estimated: use the maximum operating ambient temperature, package thermal data, and the calculated device dissipation to determine whether a thermal pad, exposed pad, or copper area is required. Actual junction temperature depends on the PCB stackup, copper coverage, airflow, and adjacent heat sources, so a package outline alone is insufficient. Validate the assembled design with temperature-rise measurements and preserve the manufacturer-recommended land pattern for reliable assembly.
合规信息
The manufacturer datasheet references JEDEC J-STD-020 for board-soldering reflow classification. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not established for this exact ordering configuration.