P5020NSN7QMB - QorIQ Dual-Core 1.6GHz e5500 SoC, 1295-FCBGA | NXP
Артикул: P5020NSN7QMB ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $420.87 | $420,87 |
| 10 | $399.83 | $3.998,30 |
| 100 | $357.74 | $35.774,00 |
| 500 | $320.5 | $160.250,00 |
| 1.000 | $289.99 | $289.990,00 |
P5020NSN7QMB Обзор
As a QorIQ communications processor (Power Architecture -> embedded MPU -> SoC -> semiconductor), the P5020NSN7QMB sits within NXP's tier of multi-core SoCs that replaced older PowerQUICC parts. The e5500 core implements the Book-E augmented Power Architecture with hypervisor and virtualization support, giving designers access to a mature toolchain (CodeWarrior, GCC) and established operating systems such as Linux and VxWorks. The dual-core 1.6 GHz configuration in this SKU balances per-thread performance against thermal envelope, with a maximum junction temperature of 105 C enabling fanless deployment with adequate heatsinking.
Key features of the P5020NSN7QMB include dual e5500 64-bit cores with integrated L1/L2 caches, a 64-bit DDR3/DDR3L memory controller with ECC, three PCIe Gen2 controllers, four SRIO ports, two RGMII 10/100/1000 Ethernet controllers, dedicated hardware engines for pattern matching, queue management, and cryptography (SEC), plus multiple UART, I2C, SPI, USB, and GPIO interfaces. The integrated Data Path Acceleration Architecture (DPAA) offloads packet classification, queueing, and crypto hardware acceleration from the cores, which is critical for line-rate networking throughput at multi-GbE aggregate traffic.
Typical applications of the P5020NSN7QMB include industrial control and factory automation PLCs, networked industrial gateways, military/aerospace signal processing, mid-range routers and switches, secure network appliances, factory IoT gateways, and defense embedded computing. The combination of dual GbE, PCIe, and SRIO makes it well suited as a control-plane or fast-path processor in Software Defined Networking (SDN) and Network Functions Virtualization (NFV) hardware. The device is also used in industrial automation, machine vision preprocessing, and edge compute where deterministic real-time response is essential.
When designing with this SoC, ensure the 37.5x37.5 mm FCBGA land pattern is laid out to NXP's escape recommendations - the high pin count (1295 balls, 1.0 mm pitch typical for this family) requires HDI PCB stackup and matched-length SerDes routing. Boot configuration, clocking, and reset sequencing follow the QorIQ P5020 reference manual, and the integrated SEC engine requires software driver initialization. Memory channel routing must adhere to DDR3 fly-by topology to preserve signal integrity at the target data rate.
Аналоги без доработки для P5020NSN7QMB — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с P5020NSN7QMB (тот же форм-фактор и посадочное место) — отличается по Ethernet, Hardware Acceleration, Memory Controller, Package.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
P5020NXE1QMB
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
P5020NSE7TNB
✅ Прямая замена✓ В наличии
$199.5 / шт.
Открыть даташит →P5010NSN7QMB
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
P5040NSN7QMB
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
P5020NSE7QMB
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
P5020NSN7QMB Максимальные параметры и электрические характеристики
| Architecture | Power Architecture e5500 (Book-E augmented) |
| Core Count | 2 (dual-core) |
| Bit Width | 64-bit |
| Maximum Core Frequency | 2.0 GHz |
| SKU Core Frequency | 1.6 GHz |
| Family | QorIQ P5 (P5020/P5010) |
| Memory Controller | 64-bit DDR3/DDR3L with ECC |
| PCIe Controllers | 3 x PCIe Gen2 |
| Serial RapidIO | 4 x SRIO lanes |
| Ethernet | 2 x 10/100/1000 RGMII |
| Hardware Acceleration | SEC crypto engine, DPAA (pattern match, queue mgmt) |
| Корпус | 1295-FCBGA (37.5 x 37.5 mm) |
| Диапазон рабочих температур | 0 C to 105 C (junction) |
| Тип монтажа | Surface Mount |
| Статус RoHS | Compliant |
Руководство по цоколевке P5020NSN7QMB в корпусе 1295-fcbga (37.5 x 37.5 mm)
Цоколевка для P5020NSN7QMB (корпус 1295-fcbga (37.5 x 37.5 mm)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для P5020NSN7QMB.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
P5020NSN7QMB подходит для 6 применениеs: Industrial Network Router, Factory Automation PLC Controller, Defense Embedded Computing Platform, Edge IoT Gateway, Network Attached Storage Controller, Software Defined Radio Baseband Processor.
Industrial Network Router
The P5020NSN7QMB fits industrial network router designs because its dual GbE controllers, three PCIe Gen2 lanes, and four SRIO ports cover the full multi-protocol fabric that mid-range industrial routers expose to factory networks. The dual e5500 cores at 1.6 GHz run a routing control plane (Linux with FRR or Quagga) on one core while the second handles packet forwarding accelerated by the DPAA engines, sustaining line-rate throughput on GbE uplinks without CPU bottleneck. The integrated SEC engine terminates IPsec tunnels for site-to-site VPN connectivity, and DDR3 with ECC protects routing tables from single-bit upset in noisy industrial environments. Compared to a soft-router on a general-purpose CPU, the P5020NSN7QMB delivers deterministic forwarding latency with a typical idle power envelope suited to DIN-rail chassis with passive heatsinking.
Рекомендуется
Factory Automation PLC Controller
Factory automation PLC controllers leverage the P5020NSN7QMB's deterministic Power Architecture cores paired with VxWorks or PREEMPT_RT Linux to run real-time control loops at sub-millisecond intervals. The 0 to 105 C junction temperature range allows deployment inside sealed control cabinets without active cooling, while the integrated peripherals (UART, I2C, SPI, GPIO) interface directly to sensor backplanes and fieldbus bridges. PCIe Gen2 connects to motion-control co-processors or vision subsystems, and DPAA accelerates deterministic Ethernet protocols such as EtherCAT, PROFINET, or EtherNet/IP. The dual e5500 cores allow one core to be dedicated to safety-critical control while the second handles HMI and remote I/O aggregation, partitioning concerns without an external MCU.
Рекомендуется
Defense Embedded Computing Platform
Defense embedded computing platforms (vetronics, avionics databuses, mission computers) deploy the P5020NSN7QMB where the Power Architecture software base, hardware crypto, and ruggedized thermal envelope combine into a single qualified part. The SEC engine provides FIPS-compliant AES, SHA, and RSA acceleration for tactical radio links, while the SRIO ports connect to FPGA-based signal processing cards that perform RF digitization or radar preprocessing. ECC on DDR3 protects against single-event upset in high-altitude or radiation-tolerant environments, and the 1295-FCBGA package supports conduction-cooled chassis via the integrated thermal interface. The dual e5500 cores partition trusted (crypto) and untrusted (user application) execution domains, satisfying cross-domain security requirements.
Рекомендуется
Edge IoT Gateway
Edge IoT gateways aggregate sensor data from field devices before forwarding to the cloud, and the P5020NSN7QMB is well suited because the dual GbE interfaces provide WAN and LAN segmentation, while PCIe connects to wireless modems (LTE/5G, LoRa, Wi-Fi 6). The DPAA engines accelerate MQTT/CoAP termination and on-device analytics at the network edge, reducing cloud bandwidth by filtering and aggregating telemetry locally. Hardware crypto (SEC) protects data-at-rest and TLS tunnels with negligible CPU overhead, allowing the e5500 cores to focus on business logic and local storage management. The 1.6 GHz dual-core configuration balances compute density against the thermal envelope of compact IP65 enclosures, and DDR3 with ECC ensures reliable operation across industrial temperature swings.
Рекомендуется
Network Attached Storage Controller
Network attached storage controllers benefit from the P5020NSN7QMB's PCIe Gen2 lanes connecting to SATA/SAS HBAs or NVMe adapters, while the dual GbE ports enable link-aggregation or SMB/NFS multi-channel bonding. The e5500 cores run the storage stack (ZFS, Linux MD, or proprietary RAID) with hardware-accelerated AES-XTS for full-disk encryption via the SEC engine, sustaining multi-gigabit encrypted throughput without offload to a separate crypto card. DDR3 with ECC detects and corrects bit errors in page-cache DRAM, critical for write-coherency in enterprise NAS deployments. The integrated peripherals support front-panel displays, button inputs, and hardware watchdog timers.
Рекомендуется
Software Defined Radio Baseband Processor
Software defined radio baseband processors deploy the P5020NSN7QMB as the host CPU for waveform processing, with SRIO connecting to FPGA-based RF front-ends and PCIe linking to ADC/DAC digitizer cards. The dual e5500 cores handle PHY/MAC layer processing for LTE, Wi-Fi, or tactical waveforms, while the DPAA engines accelerate FFT and convolution kernels through queue management offloads. The 64-bit DDR3 controller feeds the high-bandwidth data plane from digitizers without bottleneck, and ECC protects against transient errors that would otherwise corrupt demodulated packets. Hardware crypto in the SEC engine secures control channels, and the industrial thermal range supports outdoor base station enclosures.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для P5020NSN7QMB — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | P5020NXE1QMB | P5020NSE7TNB | P5010NSN7QMB | P5040NSN7QMB |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 1295-FCBGA (37.5x37.5) | 1295-FCBGA (37.5x37.5) | 1295-FCBGA (37.5x37.5) | 1295-FCBGA (37.5x37.5) | 1295-FCBGA (37.5x37.5) |
| Core Count | 2 (dual e5500) | 2 (dual e5500) | 2 (dual e5500) | 1 (single e5500) | 4 (quad e5500) |
| SKU Core Frequency | 1.6 GHz | 1.6 GHz | 1.6 GHz | 1.6 GHz | 1.8 GHz |
| Memory Controller | DDR3/DDR3L 64-bit ECC | DDR3/DDR3L 64-bit ECC | DDR3/DDR3L 64-bit ECC | DDR3/DDR3L 64-bit ECC | DDR3/DDR3L 64-bit ECC |
| PCIe Controllers | 3 x PCIe Gen2 | 3 x PCIe Gen2 | 3 x PCIe Gen2 | 3 x PCIe Gen2 | 3 x PCIe Gen2 |
| Hardware Crypto (SEC) | Yes | Yes | Yes | Yes | Yes |
| Operating Temperature | 0 C to 105 C | 0 C to 105 C | 0 C to 105 C | 0 C to 105 C | 0 C to 105 C |
Ключевые отличия
- Dual-core e5500 with DPAA and SEC acceleration integrated (против P5010NSN7QMB)
- Identical parametric profile at different ordering code (против P5020NXE1QMB)
- Cost-down dual-core option vs quad-core P5040 (против P5040NSN7QMB)
Заметки по проектированию
The 1295-FCBGA package at 37.5x37.5 mm requires an HDI PCB stackup with laser-drilled microvias for inner-row escape. Per NXP's QorIQ P5020 Design Checklist, use a 1.0 mm BGA pitch layout with via-in-pad or dog-bone escape on at least the top two routing layers. Maintain continuous ground reference planes under the BGA to control impedance and reduce SSO noise on DDR3 and SerDes interfaces.
Estimated: At 1.6 GHz dual-core with both cores active at 100% utilization, typical power dissipation is approximately 8-12 W depending on workload mix and SerDes lane utilization. The FCBFCP does not expose a top-side heat spreader, so conduction cooling through a chassis wall or compression-mount heatsink is recommended. Without active cooling, derate the ambient temperature ceiling or throttle core frequency via the QorIQ thermal management unit. A maximum junction of 105 C (per the "QMB" suffix) leaves margin only for moderate ambient designs.
Do not assume SerDes lane assignments are static across P5020 SKUs - the SerDes multiplex map is configured by RCW (Reset Configuration Word) at boot and must match the board's actual PCIe/SRIO/SGMI topology. Verify the DDR3 fly-by topology matches the reference design exactly; T-topology is not supported and breaks timing margin. Finally, ensure the boot ROM, IFC, and eSPI boot sources are configured via correct pull-up/pull-down on reset configuration pins per the reference manual.
Информация о соответствии
RoHS and lead-free confirmed per NXP product page and DigiKey/Mouser listing attributes. AEC-Q100 not applicable as this is a complex MPU, not an automotive-qualified IC. Halogen-free status not explicitly confirmed in provided data.
