P5020NSN7QMB - QorIQ Dual-Core 1.6GHz e5500 SoC, 1295-FCBGA | NXP
Référence : P5020NSN7QMB ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $420.87 | $420,87 |
| 10 | $399.83 | $3 998,30 |
| 100 | $357.74 | $35 774,00 |
| 500 | $320.5 | $160 250,00 |
| 1 000 | $289.99 | $289 990,00 |
P5020NSN7QMB Présentation
As a QorIQ communications processor (Power Architecture -> embedded MPU -> SoC -> semiconductor), the P5020NSN7QMB sits within NXP's tier of multi-core SoCs that replaced older PowerQUICC parts. The e5500 core implements the Book-E augmented Power Architecture with hypervisor and virtualization support, giving designers access to a mature toolchain (CodeWarrior, GCC) and established operating systems such as Linux and VxWorks. The dual-core 1.6 GHz configuration in this SKU balances per-thread performance against thermal envelope, with a maximum junction temperature of 105 C enabling fanless deployment with adequate heatsinking.
Key features of the P5020NSN7QMB include dual e5500 64-bit cores with integrated L1/L2 caches, a 64-bit DDR3/DDR3L memory controller with ECC, three PCIe Gen2 controllers, four SRIO ports, two RGMII 10/100/1000 Ethernet controllers, dedicated hardware engines for pattern matching, queue management, and cryptography (SEC), plus multiple UART, I2C, SPI, USB, and GPIO interfaces. The integrated Data Path Acceleration Architecture (DPAA) offloads packet classification, queueing, and crypto hardware acceleration from the cores, which is critical for line-rate networking throughput at multi-GbE aggregate traffic.
Typical applications of the P5020NSN7QMB include industrial control and factory automation PLCs, networked industrial gateways, military/aerospace signal processing, mid-range routers and switches, secure network appliances, factory IoT gateways, and defense embedded computing. The combination of dual GbE, PCIe, and SRIO makes it well suited as a control-plane or fast-path processor in Software Defined Networking (SDN) and Network Functions Virtualization (NFV) hardware. The device is also used in industrial automation, machine vision preprocessing, and edge compute where deterministic real-time response is essential.
When designing with this SoC, ensure the 37.5x37.5 mm FCBGA land pattern is laid out to NXP's escape recommendations - the high pin count (1295 balls, 1.0 mm pitch typical for this family) requires HDI PCB stackup and matched-length SerDes routing. Boot configuration, clocking, and reset sequencing follow the QorIQ P5020 reference manual, and the integrated SEC engine requires software driver initialization. Memory channel routing must adhere to DDR3 fly-by topology to preserve signal integrity at the target data rate.
Alternatives de remplacement direct pour P5020NSN7QMB — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec P5020NSN7QMB (même facteur de forme et même empreinte) — différant par Core Architecture, Ethernet, Hardware Acceleration, Memory Controller, Number of Cores.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
P5020NXE1QMB
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
P5020NSE7TNB
✅ Remplacement direct✓ En stock
$199.5 / unité
Voir la fiche technique →P5010NSN7QMB
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
P5040NSN7QMB
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
P5020NSE7QMB
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
P5020NSN7QMB Valeurs maximales et caractéristiques électriques
| Architecture | Power Architecture e5500 (Book-E augmented) |
| Core Count | 2 (dual-core) |
| Bit Width | 64-bit |
| Maximum Core Frequency | 2.0 GHz |
| SKU Core Frequency | 1.6 GHz |
| Family | QorIQ P5 (P5020/P5010) |
| Memory Controller | 64-bit DDR3/DDR3L with ECC |
| PCIe Controllers | 3 x PCIe Gen2 |
| Serial RapidIO | 4 x SRIO lanes |
| Ethernet | 2 x 10/100/1000 RGMII |
| Hardware Acceleration | SEC crypto engine, DPAA (pattern match, queue mgmt) |
| Boîtier | 1295-FCBGA (37.5 x 37.5 mm) |
| Plage de température de fonctionnement | 0 C to 105 C (junction) |
| Type de montage | Surface Mount |
| Statut RoHS | Compliant |
Guide de configuration des broches du P5020NSN7QMB 1295-fcbga (37.5 x 37.5 mm)
Configuration des broches du P5020NSN7QMB (boîtier 1295-fcbga (37.5 x 37.5 mm)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour P5020NSN7QMB.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
P5020NSN7QMB convient pour 6 applications: Industrial Network Router, Factory Automation PLC Controller, Defense Embedded Computing Platform, Edge IoT Gateway, Network Attached Storage Controller, Software Defined Radio Baseband Processor.
Industrial Network Router
The P5020NSN7QMB fits industrial network router designs because its dual GbE controllers, three PCIe Gen2 lanes, and four SRIO ports cover the full multi-protocol fabric that mid-range industrial routers expose to factory networks. The dual e5500 cores at 1.6 GHz run a routing control plane (Linux with FRR or Quagga) on one core while the second handles packet forwarding accelerated by the DPAA engines, sustaining line-rate throughput on GbE uplinks without CPU bottleneck. The integrated SEC engine terminates IPsec tunnels for site-to-site VPN connectivity, and DDR3 with ECC protects routing tables from single-bit upset in noisy industrial environments. Compared to a soft-router on a general-purpose CPU, the P5020NSN7QMB delivers deterministic forwarding latency with a typical idle power envelope suited to DIN-rail chassis with passive heatsinking.
Recommandé
Factory Automation PLC Controller
Factory automation PLC controllers leverage the P5020NSN7QMB's deterministic Power Architecture cores paired with VxWorks or PREEMPT_RT Linux to run real-time control loops at sub-millisecond intervals. The 0 to 105 C junction temperature range allows deployment inside sealed control cabinets without active cooling, while the integrated peripherals (UART, I2C, SPI, GPIO) interface directly to sensor backplanes and fieldbus bridges. PCIe Gen2 connects to motion-control co-processors or vision subsystems, and DPAA accelerates deterministic Ethernet protocols such as EtherCAT, PROFINET, or EtherNet/IP. The dual e5500 cores allow one core to be dedicated to safety-critical control while the second handles HMI and remote I/O aggregation, partitioning concerns without an external MCU.
Recommandé
Defense Embedded Computing Platform
Defense embedded computing platforms (vetronics, avionics databuses, mission computers) deploy the P5020NSN7QMB where the Power Architecture software base, hardware crypto, and ruggedized thermal envelope combine into a single qualified part. The SEC engine provides FIPS-compliant AES, SHA, and RSA acceleration for tactical radio links, while the SRIO ports connect to FPGA-based signal processing cards that perform RF digitization or radar preprocessing. ECC on DDR3 protects against single-event upset in high-altitude or radiation-tolerant environments, and the 1295-FCBGA package supports conduction-cooled chassis via the integrated thermal interface. The dual e5500 cores partition trusted (crypto) and untrusted (user application) execution domains, satisfying cross-domain security requirements.
Recommandé
Edge IoT Gateway
Edge IoT gateways aggregate sensor data from field devices before forwarding to the cloud, and the P5020NSN7QMB is well suited because the dual GbE interfaces provide WAN and LAN segmentation, while PCIe connects to wireless modems (LTE/5G, LoRa, Wi-Fi 6). The DPAA engines accelerate MQTT/CoAP termination and on-device analytics at the network edge, reducing cloud bandwidth by filtering and aggregating telemetry locally. Hardware crypto (SEC) protects data-at-rest and TLS tunnels with negligible CPU overhead, allowing the e5500 cores to focus on business logic and local storage management. The 1.6 GHz dual-core configuration balances compute density against the thermal envelope of compact IP65 enclosures, and DDR3 with ECC ensures reliable operation across industrial temperature swings.
Recommandé
Network Attached Storage Controller
Network attached storage controllers benefit from the P5020NSN7QMB's PCIe Gen2 lanes connecting to SATA/SAS HBAs or NVMe adapters, while the dual GbE ports enable link-aggregation or SMB/NFS multi-channel bonding. The e5500 cores run the storage stack (ZFS, Linux MD, or proprietary RAID) with hardware-accelerated AES-XTS for full-disk encryption via the SEC engine, sustaining multi-gigabit encrypted throughput without offload to a separate crypto card. DDR3 with ECC detects and corrects bit errors in page-cache DRAM, critical for write-coherency in enterprise NAS deployments. The integrated peripherals support front-panel displays, button inputs, and hardware watchdog timers.
Recommandé
Software Defined Radio Baseband Processor
Software defined radio baseband processors deploy the P5020NSN7QMB as the host CPU for waveform processing, with SRIO connecting to FPGA-based RF front-ends and PCIe linking to ADC/DAC digitizer cards. The dual e5500 cores handle PHY/MAC layer processing for LTE, Wi-Fi, or tactical waveforms, while the DPAA engines accelerate FFT and convolution kernels through queue management offloads. The 64-bit DDR3 controller feeds the high-bandwidth data plane from digitizers without bottleneck, and ECC protects against transient errors that would otherwise corrupt demodulated packets. Hardware crypto in the SEC engine secures control channels, and the industrial thermal range supports outdoor base station enclosures.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour P5020NSN7QMB — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | P5020NXE1QMB | P5020NSE7TNB | P5010NSN7QMB | P5040NSN7QMB |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 1295-FCBGA (37.5x37.5) | 1295-FCBGA (37.5x37.5) | 1295-FCBGA (37.5x37.5) | 1295-FCBGA (37.5x37.5) | 1295-FCBGA (37.5x37.5) |
| Core Count | 2 (dual e5500) | 2 (dual e5500) | 2 (dual e5500) | 1 (single e5500) | 4 (quad e5500) |
| SKU Core Frequency | 1.6 GHz | 1.6 GHz | 1.6 GHz | 1.6 GHz | 1.8 GHz |
| Memory Controller | DDR3/DDR3L 64-bit ECC | DDR3/DDR3L 64-bit ECC | DDR3/DDR3L 64-bit ECC | DDR3/DDR3L 64-bit ECC | DDR3/DDR3L 64-bit ECC |
| PCIe Controllers | 3 x PCIe Gen2 | 3 x PCIe Gen2 | 3 x PCIe Gen2 | 3 x PCIe Gen2 | 3 x PCIe Gen2 |
| Hardware Crypto (SEC) | Yes | Yes | Yes | Yes | Yes |
| Operating Temperature | 0 C to 105 C | 0 C to 105 C | 0 C to 105 C | 0 C to 105 C | 0 C to 105 C |
Principaux différenciateurs
- Dual-core e5500 with DPAA and SEC acceleration integrated (vs P5010NSN7QMB)
- Identical parametric profile at different ordering code (vs P5020NXE1QMB)
- Cost-down dual-core option vs quad-core P5040 (vs P5040NSN7QMB)
Notes de conception
The 1295-FCBGA package at 37.5x37.5 mm requires an HDI PCB stackup with laser-drilled microvias for inner-row escape. Per NXP's QorIQ P5020 Design Checklist, use a 1.0 mm BGA pitch layout with via-in-pad or dog-bone escape on at least the top two routing layers. Maintain continuous ground reference planes under the BGA to control impedance and reduce SSO noise on DDR3 and SerDes interfaces.
Estimated: At 1.6 GHz dual-core with both cores active at 100% utilization, typical power dissipation is approximately 8-12 W depending on workload mix and SerDes lane utilization. The FCBFCP does not expose a top-side heat spreader, so conduction cooling through a chassis wall or compression-mount heatsink is recommended. Without active cooling, derate the ambient temperature ceiling or throttle core frequency via the QorIQ thermal management unit. A maximum junction of 105 C (per the "QMB" suffix) leaves margin only for moderate ambient designs.
Do not assume SerDes lane assignments are static across P5020 SKUs - the SerDes multiplex map is configured by RCW (Reset Configuration Word) at boot and must match the board's actual PCIe/SRIO/SGMI topology. Verify the DDR3 fly-by topology matches the reference design exactly; T-topology is not supported and breaks timing margin. Finally, ensure the boot ROM, IFC, and eSPI boot sources are configured via correct pull-up/pull-down on reset configuration pins per the reference manual.
Informations de conformité
RoHS and lead-free confirmed per NXP product page and DigiKey/Mouser listing attributes. AEC-Q100 not applicable as this is a complex MPU, not an automotive-qualified IC. Halogen-free status not explicitly confirmed in provided data.
