PCA9511D - Hot-Swappable I2C/SMBus Buffer | NXP
Артикул: PCA9511D ✗ Снят с производстваPCA9511D Обзор
A hot-swappable bus buffer is an interface IC that isolates two bus segments while a card is inserted or removed. Its control circuitry prevents electrical disturbance from the newly connected or disconnected card from propagating across the active bus. Within the interface hierarchy, the PCA9511D belongs to the I2C and SMBus buffer class, which sits beneath bus transceivers and broader interface ICs used to protect, isolate, or route communications links.
The principal device characteristics are a 2.7 V to 5.5 V supply range, support for I2C and SMBus signaling, a nominal 400 kHz operating rate, and an 8-pin SOIC package. The buffer function allows equipment makers to use the same backplane architecture across cPCI, VME, AdvancedTCA, and similar multipoint backplane systems where field-replaceable cards may be inserted into a running system.
The PCA9511D separates the bus side connected to the insertion or removal event from the host-side communication path. This isolation is functionally important because connector transients and card power-state transitions can otherwise disturb clock and data waveforms. The NXP product page identifies the device as discontinued, so it should be treated as a legacy component for maintenance, repair, and previously qualified system support rather than a new-design preference.
Typical uses include hot-pluggable cPCI and VME controller cards, AdvancedTCA line cards, embedded backplane interfaces, and other I2C or SMBus systems that require controlled card insertion or removal. The 400 kHz bus designation also places the device in legacy low-speed bus applications rather than newer high-speed I2C designs.
When designing around the PCA9511D, preserve the bus-side and card-side separation described by the manufacturer datasheet, validate connector and card power-up sequencing, and verify signal integrity in the completed backplane. PCB changes are generally unnecessary when replacing the same 8-pin SOIC device, but functional and lifecycle qualification must precede substitution.
This product record combines lifecycle, electrical, package, sourcing, cross-reference, and replacement guidance with practical hot-plug design considerations. It also distinguishes true pin-to-pin options from superficially similar I2C switches and multiplexers that require different control, channel-count, or bus-isolation behavior.
Аналоги без доработки для PCA9511D — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PCA9511D (тот же форм-фактор и посадочное место) — отличается по Package, Product Type.
Для этого товара нет аналогов без доработки.
Запросить аналогиPCA9511D Характеристики
| Product Type | Hot-swappable I2C and SMBus bus buffer |
| Channel Count | 1 channel |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Nominal Bus Speed | 400 kHz |
| Supported Interfaces | I2C and SMBus |
| Hot-Swap Capability | Yes |
| Корпус | 8-pin SOIC |
| Тип монтажа | Surface mount |
| Output Buffer Type | I2C bus and SMBus switch |
| Статус жизненного цикла | Discontinued |
Руководство по цоколевке PCA9511D в корпусе 8-pin soic
Цоколевка для PCA9511D (корпус 8-pin soic). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.
Нет подробных данных о распиновке для PCA9511D.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
PCA9511D подходит для 6 применениеs: Hot-Pluggable CPCI Backplane Cards, VME Card Insertion Control, AdvancedTCA Line-Card Interface, Embedded Hot-Swap Control Bus, Instrumentation Module Interconnect, Legacy Communication Equipment Repair.
Hot-Pluggable CPCI Backplane Cards
The PCA9511D fits a cPCI card interface that may be inserted into or removed from an operating backplane. Its hot-swappable I2C and SMBus buffer function is intended to keep disturbance from the card connection event from corrupting the active data and clock buses. With a 2.7 V to 5.5 V supply range and a one-channel architecture, it is appropriate for legacy cPCI management paths operating at the 400 kHz class. The implementation should follow the manufacturer application circuit, preserve bus isolation, and validate connector transitions, card power states, and signal integrity in the assembled chassis.
Рекомендуется
VME Card Insertion Control
The PCA9511D is suited to VME backplane management interfaces where card insertion or removal must not corrupt an active I2C or SMBus segment. The one-channel buffer provides a controlled isolation point between the host side and card side of the interface while the card is connected or disconnected. Its 2.7 V to 5.5 V operating range supports common legacy embedded-system supply levels, while the 400 kHz designation matches low-speed management-bus requirements. Validate the final design against the manufacturer hot-plug circuit, including startup sequencing, connector bounce, bus capacitance, and card power-state behavior during insertion.
Рекомендуется
AdvancedTCA Line-Card Interface
The PCA9511D can support legacy AdvancedTCA line-card systems in which a management interface must tolerate card removal from a live backplane. Its hot-swappable I2C and SMBus buffer architecture is intended to prevent connection-related disturbance from propagating into the operating bus. The one-channel implementation, 2.7 V to 5.5 V supply, and 400 kHz operating class align with low-speed administrative links rather than high-speed differential payloads. Before release, reproduce the manufacturer's application topology and verify isolation timing, power sequencing, connector behavior, and channel capacitance across the complete platform.
Рекомендуется
Embedded Hot-Swap Control Bus
The PCA9511D is appropriate for an embedded controller that exchanges I2C or SMBus management information with a removable expansion module. Its hot-swappable buffer behavior is designed to protect the active host bus when the module is inserted or extracted, reducing the risk that connector transients or card-state changes corrupt clock and data. The 2.7 V to 5.5 V operating range supports both 3.3 V and 5 V legacy systems, and the one-channel arrangement suits a single isolated expansion path. The circuit must follow the manufacturer hot-plug example and be tested with realistic connector transitions, card power-up sequences, and bus loading.
Рекомендуется
Instrumentation Module Interconnect
The PCA9511D can isolate a removable instrumentation module's I2C or SMBus management connection from a host controller that remains active during service or reconfiguration. This is useful where the module may be connected without shutting down the measurement system and where bus corruption could disrupt calibration, configuration, or status reporting. The device's one-channel architecture and 400 kHz class are appropriate for low-speed control traffic, while its 2.7 V to 5.5 V supply range supports common embedded supply rails. Confirm timing, enable behavior, capacitance, and supply sequencing in the manufacturer application circuit before production use.
Рекомендуется
Legacy Communication Equipment Repair
The PCA9511D is relevant to repair and maintenance of legacy communication equipment with hot-pluggable I2C or SMBus cards. Its documented one-channel buffer function allows an original motherboard to retain the intended isolation behavior when a failed device must be replaced. Because NXP identifies the part as discontinued, procurement should require exact package marking, date code, condition, and traceability. Technical interchangeability must be established through pin, timing, supply-voltage, enable-state, and hot-swap comparisons rather than package appearance alone. Request the legacy part through the Request a Quote form on this page.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PCA9511D — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар |
|---|---|
| Package | 8-pin SOIC |
| Brand | NXP Semiconductors |
| Product Type | Hot-swappable I2C and SMBus bus buffer |
| Channel Count | 1 channel |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Nominal Bus Speed | 400 kHz |
| Hot-Swap Capability | Yes |
| Lifecycle Status | Discontinued |
Ключевые отличия
- Purpose-built hot-swap isolation (против PCA9512AD)
- Defined legacy backplane role (против PCA9543ADR)
- One-channel focused implementation (против PCA9512AD)
Заметки по проектированию
Route the bus-side and card-side I2C or SMBus paths as separate nets terminated only at the locations specified by the manufacturer application circuit. Keep the buffer close to the connector or card interface and preserve the isolation topology, because long shared copper paths can allow card-insertion transients to reach the active bus. Match trace geometry where possible and verify that the card-side stub does not create timing or capacitance problems during hot insertion.
Design the 2.7 V to 5.5 V supply path so the PCA9511D remains within its operating range during card insertion, removal, and system startup. Include local supply decoupling as specified in the manufacturer datasheet and keep the return path continuous when connector and card ground states change. Validate sequencing with the actual connector, backplane, and card because a nominal operating range alone does not guarantee correct hot-swap behavior.
Do not treat a generic 8-pin I2C switch or multiplexer as a direct substitute for the PCA9511D. Pin position, enable polarity, channel count, bus-side isolation, operating range, and hot-swap timing must all agree with the manufacturer datasheet. For the discontinued target, preserve the original schematic and verify any proposed substitute across insertion, removal, idle, bus traffic, and supply-ramp conditions before committing it to production.
Информация о соответствии
The manufacturer page identifies PCA9511D as discontinued and no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was confirmed for the exact device.