PCA9535RTWR - 16-Bit I/O Expander | Texas Instruments
Артикул: PCA9535RTWR ✓ АктивенPCA9535RTWR Обзор
An I/O expander is an interface IC that converts a serial bus into additional parallel digital inputs and outputs. The PCA9535 belongs to the broader hierarchy of serial interface controller, I/O expander, interface IC, and semiconductor. Unlike a GPIO controller integrated into the host processor, this device manages 16 additional lines remotely while the processor reads and writes them through I2C or SMBus transactions.
The PCA9535 provides separate input and output configuration registers, allowing each line to be programmed for input or output operation. Other useful features include polarity inversion for input and output registers, an interrupt output for change detection, and configurable I2C addresses. According to the manufacturer datasheet, the low standby-current consumption is as low as 1 uA, making the device suitable for low-power embedded equipment where peripheral I/O must remain available without continuously loading the power supply.
Its 2.3 V to 5.5 V operating range covers common embedded, industrial, and consumer supply levels. The 400 kHz I2C rate supports reliable communication with microcontrollers and other bus peripherals while avoiding the complexity of a high-speed serial interface. The interrupt output provides a hardware indication that at least one configured input has changed, reducing the need for continuous register polling.
Typical applications include industrial control modules, sensor and actuator interface boards, programmable logic controller peripherals, LED status panels, keyboard scanners, and compact embedded systems. The 16 lines can monitor switches and digital sensors or drive outputs such as indicator LEDs, relays, and latches when the associated circuitry supports the required current and voltage levels.
Designers should confirm pull-up requirements, address selection, and output-current limits in the manufacturer datasheet. Place the device and bus decoupling close to the relevant connector or controlled peripheral, route the I2C and interrupt traces away from noisy power stages, and account for the exposed-pad thermal and layout requirements of the WQFN package.
This product page combines the manufacturer interface details, practical implementation guidance, application fit, and verified drop-in alternatives. It is designed to help engineers evaluate the PCA9535RTWR for new designs, compare compatible devices, and plan a PCB and firmware migration with fewer integration risks.
Аналоги без доработки для PCA9535RTWR — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
PCA9555RTWR
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
TCA9555RTWR
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PCA9535RTWR Характеристики
| Number of I/O Lines | 16 lines |
| Тип интерфейса | I2C and SMBus |
| Рабочее напряжение питания | 2.3 V to 5.5 V |
| Maximum I2C Bus Frequency | 400 kHz |
| Interrupt Output | 1 output |
| Configuration Registers | Present |
| Low Standby Current | 1 uA maximum |
| Корпус | 24-WQFN, 4 x 4 mm |
| Тип монтажа | Surface mount |
| Number of Package Pins | 24 pins |
| Статус RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
Руководство по цоколевке PCA9535RTWR в корпусе 24 pins
Цоколевка для PCA9535RTWR (корпус 24 pins). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.
Нет подробных данных о распиновке для PCA9535RTWR.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
PCA9535RTWR подходит для 6 применениеs: Industrial Control Module GPIO Expansion, Sensor and Actuator Interface Board, PLC Peripheral Interface, LED Status and Indicator Panel, Keyboard and Control Panel Scanner, Embedded System Peripheral Hub.
Industrial Control Module GPIO Expansion
The PCA9535RTWR fits industrial control modules that need additional digital command and status signals without expanding the host microcontroller. Its 16 configurable lines can connect discrete inputs, interlocks, and actuator-enable signals while I2C handles register access at up to 400 kHz. The 2.3 V to 5.5 V operating range supports common industrial logic levels, and the interrupt output allows the controller to respond to changed inputs. The main engineering consideration is the output-current limit: use the manufacturer electrical tables to confirm that each load remains within the applicable drive and voltage limits.
Рекомендуется
Sensor and Actuator Interface Board
The PCA9535RTWR is useful on sensor and actuator boards where a serial bus must connect to multiple digital devices. Sixteen independently configurable ports can accept sensor status signals and control actuator-enable stages without consuming host GPIO pins. The 400 kHz I2C rate supports efficient register access, while the interrupt output provides a hardware change indication when an input changes. Because the PCA9535 does not include the PCA9555's internal I/O pull-ups, external biasing must be designed where required and checked against the pin-level electrical specifications.
Рекомендуется
PLC Peripheral Interface
The PCA9535RTWR can extend a compact controller or peripheral with 16 digital lines for field switches, interlocks, outputs, and status indicators. It preserves a simple two-wire control path and supports I2C operation up to 400 kHz, making it appropriate for low- and medium-speed automation interfaces. The interrupt output can reduce unnecessary bus polling when a monitored input changes. System designers should account for isolation, surge protection, grounding, and output loading separately when connecting the low-voltage expander to industrial wiring.
Рекомендуется
LED Status and Indicator Panel
The PCA9535RTWR can drive a compact LED status panel when each indicator has an appropriate current-limiting circuit and remains within the port's permitted output loading. Its 16 ports provide more display-control flexibility than most small microcontrollers expose directly. Register-based input/output configuration also permits mixed designs in which some lines start indicators while others monitor panel buttons. The 2.3 V to 5.5 V range supports common 3.3 V and 5 V systems, but designers should verify output drive, voltage, and simultaneous active-line behavior against the manufacturer electrical characteristics.
Рекомендуется
Keyboard and Control Panel Scanner
The PCA9535RTWR is well suited to a keyboard or control panel that contains more switches than the host device can scan directly. Sixteen inputs can be configured as digital lines, and the interrupt output can alert the processor when a key or switch state changes. I2C communication at up to 400 kHz allows efficient polling of the port and configuration registers. PCB layout should keep the I2C traces short, provide the required pull-up network, and place ESD protection at accessible connector inputs because the expander itself is not a substitute for connector-level protection.
Рекомендуется
Embedded System Peripheral Hub
The PCA9535RTWR can serve as a peripheral hub in an embedded system that combines a processor with removable or optional front-panel functions. Its 16 ports support configuration, status, and control signals while the compact 24-WQFN 4 x 4 mm package preserves board area. The 1 uA maximum standby current helps systems that periodically power down, and the 2.3 V minimum operating voltage fits 3.3 V designs. Firmware should initialize the configuration, polarity, and interrupt registers according to the manufacturer register map before using the ports as outputs.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PCA9535RTWR — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PCA9555RTWR | TCA9555RTWR |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | QFN-24 (4 x 4 mm) | QFN-24 (4 x 4 mm) | QFN-24 (4 x 4 mm) |
| I/O Count | 16 lines | 16 lines | 16 lines |
| Operating Supply Voltage | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 1.65 V to 5.5 V |
| Maximum Bus Frequency | 400 kHz | 400 kHz | 400 kHz |
| Internal I/O Pull-Ups | Not present | Present | Present |
| Interrupt Output | Present | Present | Present |
| Configuration Registers | Present | Present | Present |
| Interface | I2C and SMBus | I2C and SMBus | I2C |
| Mounting Type | Surface mount | Surface mount | Surface mount |
Ключевые отличия
- Lower standby-power design without integrated I/O pull-ups (против PCA9555RTWR)
- Same 16-bit architecture and package (против PCA9555RTWR)
- Standard 2.3 V minimum operating voltage (против TCA9555RTWR)
Заметки по проектированию
Place the PCA9535RTWR close to the connector or peripheral group served by its 16 I/O lines, and keep the SCL and SDA traces short and away from switching nodes. Provide the required I2C pull-ups on the bus rather than assuming the PCA9535 includes the internal pull-ups available on the PCA9555. Route the exposed pad according to the manufacturer land-pattern and thermal guidance, and preserve access to every perimeter lead for inspection and rework.
Assign the address pins before finalizing the board layout because A0, A1, and A2 can select the device's I2C address. Confirm the address against every other peripheral on the same bus to avoid contention. The interrupt trace should be kept away from high-current switching paths and routed as a low-speed control signal. Where an interrupt connects to a sensitive host input, validate its level and polarity in firmware using the manufacturer register definitions.
Do not assume that the PCA9535RTWR and PCA9555RTWR are electrically identical in every application. The PCA9535 omits the internal I/O pull-up resistors, while the PCA9555 includes them. Verify external pull-up values, input leakage, standby current, and the maximum load on each port using the manufacturer datasheets. Also check whether TCA9535-family alternatives use a reset terminal differently, because an added or repurposed reset function can prevent a footprint-only replacement from being pin-to-pin compatible.
Информация о соответствии
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status is stated in the available manufacturer and distributor records. Confirm current compliance documentation with Texas Instruments before production release.