Texas Instruments

PCF8574PWG4 - 8-Bit I2C I/O Expander | Texas Instruments

Артикул: PCF8574PWG4 ✓ Активен
1 mA Id 20-pin TSSOP Package 100 kHz Speed
MOQ: 1 |

PCF8574PWG4 Обзор

Texas Instruments PCF8574PWG4 is an 8-bit I/O expander for I2C-controlled remote input/output applications, operating at up to 100 kHz and housed in a 20-pin TSSOP package. The device provides eight quasi-bidirectional I/O lines, an I2C interface, power-on reset, and an interrupt output for remote peripheral control.

An I/O expander, also called a port expander, increases the number of digital input and output pins available to a host microcontroller. The PCF8574 belongs to the interface-controller hierarchy: I/O expander → interface IC → integrated circuit → semiconductor. Its I2C interface allows a microcontroller to read and control eight external lines using serial data and clock signals instead of dedicating eight parallel GPIO pins to every peripheral.

The PCF8574PWG4 features an 8-bit quasi-bidirectional port, a 100 kHz I2C interface, and a 20-pin TSSOP package. Its interrupt output can alert the host when an input state changes, helping the controller avoid continuous polling. Power-on reset provides a defined startup state for the I/O port, while the quasi-bidirectional outputs can source or sink current depending on operating state.

The I2C interface supports connection to a broad range of microcontrollers and embedded systems. Address selection is commonly implemented through input pins, allowing multiple expanders to share the same bus when the device configuration supports it. Because the port uses quasi-bidirectional structures, designers should review the device datasheet for output-drive, input, pull-up, and current-limit details before driving external loads.

Typical uses include reading push buttons and selectors, controlling LEDs or discrete relays, monitoring digital sensors, and expanding the I/O capacity of industrial controllers, appliances, instruments, and consumer equipment. The 20-pin TSSOP package also supports compact board layouts where a larger dual-inline package would be inconvenient.

For a new layout, route the I2C pins according to the datasheet pin description and place pull-up resistors close to the bus master. Confirm the logic-level voltage of every connected device, preserve the power-on reset behavior, and calculate the total port and bus loading before enabling multiple expanders. Use the manufacturer pin-description table when assigning PCB tracks and connector signals.

This product page organizes the exact MPN, package, interface details, verified distribution information, replacement guidance, and practical integration considerations for engineers evaluating the PCF8574PWG4.

Аналоги без доработки для PCF8574PWG4 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с PCF8574PWG4 (тот же форм-фактор и посадочное место) — отличается по Interface, Interrupt Output, Package.

Texas Instruments
Interface: I2C (SMBus compatible)
Interrupt Output: Yes (active-low INT)
Package: 20-pin TSSOP (PW)
Сравнить с PCF8574PWG4 →
Texas Instruments
Interface: I2C (SMBus compatible)
Interrupt Output: Yes (active-low INT)
Package: 20-pin TSSOP (PW)
Сравнить с PCF8574PWG4 →

PCF8574PW

✅ Прямая замена
Texas Instruments
📦 20-pin TSSOP
I/O Expander · 8 · I2C (SMBus compatible) · 100 kHz · 0x20 (PCF8574A: 0x38) · 2.5 V to 6 V · 2.5 uA typical · Yes (active-low INT)

Уточнить цену

Открыть даташит →

PCF8574PWR

✅ Прямая замена
Texas Instruments
📦 20-pin TSSOP
I/O Expander · 8 · I2C (SMBus compatible) · 100 kHz · 0x20 (PCF8574A: 0x38) · 2.5 V to 6 V · 2.5 uA typical · Yes (active-low INT)

Уточнить цену

Открыть даташит →

PCF8574APWR

✅ Прямая замена ⚠️ Характеристики не проверены
📦 20-pin TSSOP
Same 20-pin TSSOP footprint and eight-I/O architecture; the PCF8574A family uses a different fixed bus address, changing address selection by one address code rather than electrical performance

📋 Справочный аналог (нет в каталоге)

PCF8574PWG4 Характеристики

Device Type 8-bit remote I/O expander
Number of I/O Lines 8
Интерфейс I2C
Maximum I2C Clock Frequency 100 kHz
Тип выхода Push-pull
Interrupt Output Yes
Power-On Reset Yes
Output Source Current 1 mA
Output Sink Current 25 mA
Корпус 20-pin TSSOP
Тип монтажа Surface mount
Shipping Package Tape and reel

Руководство по цоколевке PCF8574PWG4 в корпусе tape and reel

Цоколевка для PCF8574PWG4 (корпус tape and reel). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса tape and reel для PCF8574PWG4

Нет подробных данных о распиновке для PCF8574PWG4.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

PCF8574PWG4 подходит для 6 применениеs: Microcontroller GPIO Expansion, LED and Indicator Control, Industrial Relay and Discrete Control, Appliance and Control Panel Interface, Digital Sensor and Input Aggregation, Test and Measurement Front Panel.

🧩

Microcontroller GPIO Expansion

PCF8574PWG4 fits designs in which a host microcontroller has too few direct GPIO pins for buttons, indicators, and discrete control signals. The eight quasi-bidirectional lines connect to the I2C bus, while the interrupt output lets the controller react to a changed input without continuously polling every port bit. At a maximum bus rate of 100 kHz, the device is appropriate for moderate-speed human-interface and control traffic rather than high-rate data acquisition. Designers should treat each port line as a limited quasi-bidirectional resource, configure the correct address, and verify the connected MCU and peripheral logic levels before power-up.

💡

LED and Indicator Control

PCF8574PWG4 provides a compact way to add grouped indicator outputs to a controller with limited GPIO resources. Each of the eight quasi-bidirectional lines can control a discrete LED or related interface signal, with the I2C bus carrying output updates at up to 100 kHz. This arrangement reduces direct MCU pin usage and centralizes indicator control in firmware. Because the port has finite source and sink-current ratings, calculate each line's load and avoid exceeding the per-pin and aggregate limits in the Texas Instruments datasheet. High-current LEDs should therefore use a suitable transistor driver rather than being connected directly without validation.

🏭

Industrial Relay and Discrete Control

PCF8574PWG4 can form the low-current control interface of an industrial monitoring or relay-control board when the external relay drivers include suitable isolation and flyback components. The eight output lines organize the control commands, and the interrupt output supports change-driven communication with the host. The 100 kHz I2C interface provides ample bandwidth for ordinary supervisory commands rather than continuous high-speed feedback. Because the quasi-bidirectional port is not intended for unlimited inductive loads, use transistor or MOSFET driver stages for coils and ensure the driver polarity, isolation, and flyback path match the selected relay.

🔧

Appliance and Control Panel Interface

PCF8574PWG4 suits appliance control panels where switches, selectors, indicators, and small solenoid controls exceed the direct I/O budget of the main controller. The I2C connection reduces PCB routing compared with a wide parallel port, while the interrupt line alerts the appliance controller when a user input changes. The compact 20-pin TSSOP format supports space-conscious control boards and can be placed near the panel connector. Firmware should debounce mechanical contacts, establish a deterministic startup state, and avoid driving external loads beyond the published output-current capability of the selected port line.

📡

Digital Sensor and Input Aggregation

PCF8574PWG4 can aggregate slow-changing digital signals from limit switches, interlocks, selectors, and discrete sensor outputs behind one I2C address. Eight monitored lines reduce the number of direct host-controller inputs, and the interrupt output supports a responsive polling strategy. The 100 kHz interface is suitable for low-rate supervisory signals but should not be treated as a high-speed data-acquisition channel. The host must correctly handle quasi-bidirectional port reads, debounce contacts, account for address configuration, and keep all connected logic levels within the device's supply-voltage range.

🖥️

Test and Measurement Front Panel

PCF8574PWG4 is useful in an instrument front panel where status LEDs, range indicators, and user switches would otherwise consume a large share of a controller's GPIO resources. The I2C interface allows the main controller to update panel indications and read operating-mode selections efficiently, and the interrupt output provides event-driven input handling. A 100 kHz bus is more than adequate for human interaction and supervisory state changes. Keep the connector and panel circuitry away from noisy analog sections, establish grounding that avoids panel-current paths through sensitive measurement returns, and confirm that every output state during reset is acceptable for the instrument.

What is the operating voltage of PCF8574PWG4?
The PCF8574PWG4 is designed for low-voltage digital systems and includes a 2.5 V to 6 V operating range in the manufacturer device information. According to the Texas Instruments PCF8574 datasheet, the exact minimum and maximum supply values must be checked against the particular orderable variant and design limits. Keep the I2C pull-up voltage within the input range of the PCF8574 and every device connected to the same bus.
How many I/O pins does the PCF8574PWG4 provide?
The PCF8574PWG4 provides eight digital I/O lines in a 20-pin TSSOP package. According to the Texas Instruments PCF8574 datasheet, the port is an 8-bit quasi-bidirectional I/O port connected to the host through an I2C bus. The additional package pins support power, ground, bus control, address configuration, and interrupt signaling rather than adding more general-purpose I/O lines.
What is the I2C bus speed of PCF8574PWG4?
The PCF8574PWG4 supports an I2C clock frequency of up to 100 kHz. The Texas Instruments PCF8574 datasheet identifies the device as an 8-bit I2C I/O expander with a 100 kHz interface. This rate is sufficient for many button, LED, relay-control, and digital-sensor systems, although bus capacitance, pull-up resistance, wiring length, and the fastest attached peripheral must also satisfy the I2C specification.
Where can I download the PCF8574PWG4 datasheet PDF?
The PCF8574PWG4 datasheet is available from the Texas Instruments product documentation and through the linked document mirror in the PCF8574 datasheet record. The document is titled for the PCF8574PWG4 and identifies the device as a remote 8-bit I/O expander for the I2C bus. Use the manufacturer's pin-description and electrical-characteristics tables for final PCB and schematic decisions.
Where can I find the PCF8574PWG4 pinout?
The PCF8574PWG4 pinout is shown in the Texas Instruments PCF8574 datasheet, with the 20 TSSOP positions numbered according to the package drawing. Use the manufacturer pin-description table to assign VDD, VSS, SCL, SDA, the eight port lines, address inputs, reset, and interrupt. The package used for the page diagram is the 20-pin TSSOP because that is the exact package identified for PCF8574PWG4.
What can replace the PCF8574PWG4?
The closest verified drop-in replacement is PCF8574PW, which uses the same 20-pin TSSOP format and retains the same terminal and functional arrangement. The comparison record describes it as a complete replacement whose performance parameters, functions, terminals, and package are consistent. Before production use, confirm the selected temperature grade, address configuration, and exact ordering suffix against the current manufacturer datasheet.
Is PCF8574PWG4 the same as PCF8574PW?
PCF8574PWG4 and PCF8574PW are functionally equivalent 20-pin TSSOP versions of the PCF8574 family. The comparison record states that their terminals and packages are consistent and that replacement requires no board modification. The suffix can encode ordering, temperature, and qualification details, so verify those requirements before treating the parts as identical for a specific production configuration.
PCF8574PWG4 vs PCF8574DWRE4: which is pin compatible?
PCF8574DWRE4 is not a drop-in replacement for PCF8574PWG4 because it uses a different package: the comparison identifies PCF8574DWRE4 as a 16-pin SOIC and PCF8574PWG4 as a 20-pin TSSOP. Both provide eight I/O lines, I2C communication, interrupt support, and push-pull output, but their physical footprints differ. A PCB redesign is required to substitute the SOIC version.
When should I choose PCF8574PWG4 over PCF8574DWRE4?
Choose PCF8574PWG4 when the board layout is specified for a 20-pin TSSOP footprint and its 0.65 mm lead pitch is suitable for the assembly process. Choose PCF8574DWRE4 only when the PCB uses a 16-pin SOIC footprint and the wider-lead package is preferred. Their interface functions are similar, but package pin count and land pattern make PCF8574PWG4 unsuitable as a direct substitute for the SOIC device.
Is PCF8574PWG4 suitable for expanding MCU GPIO pins?
Yes, PCF8574PWG4 is suitable when a microcontroller needs eight additional digital lines over I2C. According to the Texas Instruments PCF8574 datasheet, the device provides an 8-bit quasi-bidirectional port with an interrupt output. It works well for buttons, LEDs, and discrete control inputs, provided the host firmware handles the port semantics, bus address, pull-ups, and current limits correctly.
What is the best Texas Instruments equivalent for PCF8574PWG4?
PCF8574PW is the clearest same-manufacturer equivalent identified for a direct replacement because it retains the 20-pin TSSOP package and matching terminal arrangement. The comparison record reports consistent performance parameters and no PCB modification requirement. Confirm the exact suffix, temperature range, and qualification status in the current ordering information before releasing a production BOM.
Where can I buy PCF8574PWG4 online?
PCF8574PWG4 can be requested through the Request a Quote form on this page. The form is the appropriate route for current stock confirmation, minimum order quantity, lead time, and shipment allocation. Do not treat a distributor landing page as a guarantee of inventory, because availability for this exact 20-pin TSSOP orderable can change independently by market and date.
What is the price of PCF8574PWG4?
Use the Request a Quote form on this page for the current unit price and quantity breaks for PCF8574PWG4. The structured pricing panel reflects the commercial offer associated with the exact MPN, while a quote request is needed for allocation-specific terms. The part identifier and package matter when requesting pricing because related PCF8574 order codes can use different packages or suffixes.
What is the lead time for PCF8574PWG4?
Request the current lead time through the Request a Quote form on this page. Lead time depends on manufacturer inventory, distributor allocation, order quantity, and the selected shipment destination. The PCF8574PWG4 listing identifies an exact 20-pin TSSOP orderable, so include that full MPN and the target quantity when requesting an availability commitment.
Is PCF8574PWG4 in stock?
Use the Request a Quote form on this page to request current PCF8574PWG4 stock, lot availability, and dispatch timing. The product is identified by its exact 20-pin TSSOP ordering code, which prevents confusion with other PCF8574 package variants. A quote response should confirm quantity, condition, lot traceability, lead time, and the proposed shipment date.
What are the key specifications of PCF8574PWG4 that engineers should know?
PCF8574PWG4 is an 8-bit I2C I/O expander with a 100 kHz bus, eight quasi-bidirectional port lines, push-pull output, an interrupt output, and a 20-pin TSSOP package. According to the Texas Instruments PCF8574 datasheet, these features make it useful for expanding microcontroller control and monitoring capacity. The key engineering checks are supply voltage, address setup, pull-up values, per-pin loading, and the PCB footprint.

Справочные инженерные данные для PCF8574PWG4 — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose PCF8574PWG4 when an embedded controller needs eight additional digital lines and the PCB is designed around the 20-pin TSSOP footprint. It is well suited to buttons, LEDs, panel controls, digital interlocks, and other slow supervisory signals connected through I2C at up to 100 kHz. Choose PCF8574PW when a verified same-package alternative is needed for sourcing continuity, and confirm the exact suffix requirements before release. PCF8574APWR can be useful when its different fixed address solves a bus-address conflict, but changing the base address is not a drop-in firmware change because software must use the new address. PCF8574DWRE4 is appropriate only for a redesigned 16-pin SOIC layout; it provides similar I/O functionality but is not physically interchangeable with the TSSOP target. For new designs, first validate address selection, reset behavior, port current limits, pull-up voltage, and external-load requirements before finalizing the schematic and firmware.

Сравнение с аналогами

Параметр Этот товар PCF8574PW PCF8574PWR PCF8574APWR
Package 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Number of I/O Lines 8 8 8 8
Interface I2C I2C I2C I2C
I2C Clock Frequency 100 kHz 100 kHz 100 kHz 100 kHz
Output Type Push-pull Push-pull Push-pull Push-pull
Interrupt Output Yes Yes Yes Yes
Power-On Reset Yes Yes Yes Yes
Special Feature 8-bit quasi-bidirectional I/O port with interrupt 8-bit I/O port with interrupt 8-bit I/O port with interrupt 8-bit I/O port with interrupt and different fixed address

Ключевые отличия

  • Provides eight control lines without consuming eight direct MCU GPIO pins (против PCF8574DWRE4)
  • Supports event-driven host-controller operation (против PCF8574DWRE4)
  • Direct same-footprint replacement path exists within the PCF8574 family (против PCF8574DWRE4)

Заметки по проектированию

Use the Texas Instruments PCF8574PWG4 pin-description table when routing the 20-pin TSSOP footprint. Place the device close to the connector or controlled peripheral group to minimize trace length, and keep I2C routing away from switching nodes and high-current relay paths. Confirm whether the application requires a reset connection and preserve access to all address-selection pins; incorrect fixed wiring can place multiple expanders at the same bus address.

The I2C bus requires pull-up resistors to the selected logic voltage. Calculate the resistor value from bus capacitance, sink-current limits, rise-time requirements, and the voltage drop at the lowest bus level. Place the pull-ups at the locations recommended by the system architecture, normally near the bus master or the point where the bus is least susceptible to leakage. Confirm that every pull-up remains within the PCF8574PWG4 input-voltage range during normal operation and power transitions.

Do not treat the eight port pins as unrestricted push-pull outputs or inputs. Review the quasi-bidirectional port behavior, per-line source current of 1 mA, sink current of 25 mA, and the required pull-up arrangement before attaching LEDs, relays, or other loads. Use a transistor driver for higher-current or inductive loads, and include suitable flyback protection. The interrupt signal is useful for input changes but does not remove the need to debounce mechanical contacts.

Keep the I2C traces short, continuous, and away from noisy analog or switching paths when possible. Route SDA and SCL consistently to minimize differential skew, use the package pin assignments shown in the manufacturer datasheet, and avoid unnecessary stubs on the bus. If the assembly requires split routing or long cable-like branches, validate rise time and communication margin at the 100 kHz operating rate before production.

Define the state of all eight external loads during power-on reset. The reset function gives the interface a defined startup condition, but external pull-ups, relay drivers, or connected peripherals can still transform that state into unwanted current or motion. Sequence sensitive loads with suitable gating hardware and verify the complete power-up behavior across the minimum and maximum supply conditions rather than relying only on the PCF8574 port state.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The product listing identifies the PCF8574PWG4 as an 8-bit I2C 100 kHz I/O expander in a 20-pin TSSOP package. Detailed RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not stated, so these fields remain unknown.

Данные проверены: 2026-11-14 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

PCF8574PWG4 datasheet PCF8574PWG4 datasheet pdf PCF8574PWG4 pinout PCF8574PWG4 equivalent PCF8574PWG4 replacement PCF8574PWG4 cross reference PCF8574PWG4 price PCF8574PWG4 stock Texas Instruments PCF8574PWG4 PCF8574PWG4 vs PCF8574DWRE4 PCF8574PWG4 footprint PCF8574 20-TSSOP pinout PCF8574PWG4 application circuit PCF8574 I2C GPIO expander PCF8574PWG4 100 kHz I2C

Связанные компоненты & термины

Texas Instruments PCF8574PWG4 PCF8574PW PCF8574PWR PCF8574APWR PCF8574DWRE4 I/O expander port expander interface IC integrated circuit semiconductor I2C two-wire serial bus quasi-bidirectional I/O 8-bit port interrupt output power-on reset 20-pin TSSOP TSSOP package family surface mount 100 kHz I2C microcontroller GPIO expansion digital sensor aggregation LED indicator control
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ