Texas Instruments

PCM1739EG4 - 24-Bit 192kHz Stereo DAC | Texas Instruments

Артикул: PCM1739EG4 ✓ Активен
28-pin SSOP Package
MOQ: 1 |

PCM1739EG4 Обзор

Texas Instruments PCM1739EG4 is a 24-bit, 192kHz sampling stereo digital-to-analog converter with 105dB signal-to-noise ratio in a 28-pin SSOP package. It accepts I2S audio data and uses a multi-level delta-sigma architecture to produce two analog output channels.

A DAC is a semiconductor that converts digital audio samples into proportional analog voltages for amplification and loudspeaker drive. PCM1739 belongs to the delta-sigma DAC family within the broader audio converter hierarchy, where resolution determines numerical sample detail while the sampling rate controls the highest reproducible audio bandwidth.

The PCM1739EG4 supports 24-bit audio at up to 192kHz and provides two output channels for stereo audio equipment. Its 105dB SNR specification indicates a low-noise conversion path, while the multi-level architecture reduces quantization-related distortion. The 28-pin SSOP package supports conventional surface-mount assembly, although the narrow lead pitch requires careful PCB layout and inspection.

PCM1739EG4 is designed for digital audio systems that need both high sample-rate support and low-noise analog conversion. Its I2S interface makes it suitable for systems using a digital audio processor, USB audio interface, Blu-ray player, game console, or home-audio controller. Stereo outputs support left and right channels for consumer and professional listening equipment.

Typical uses include high-resolution network players, USB audio interfaces, CD and DVD players, digital mixing consoles, surround-sound processors, and audio evaluation boards. The 192kHz capability is useful for native high-resolution source material, while the 105dB SNR supports quiet passages and low-level musical details.

Designers should treat this converter as a precision analog component. Use the digital interface timing and analog output filtering guidance in the manufacturer datasheet, maintain short return paths for the analog outputs, and provide stable reference and power connections. Tube packaging is identified by the G4 ordering code, so production planning should include appropriate handling and incoming inspection.

This product page consolidates the key electrical and packaging characteristics, practical application guidance, verified lifecycle information, and pin-compatible replacement analysis to support faster component selection and PCB design.

Аналоги без доработки для PCM1739EG4 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с PCM1739EG4 (тот же форм-фактор и посадочное место) — отличается по Maximum Sampling Rate, Signal-to-Noise Ratio, Converter Type, Product Type.

Texas Instruments
Signal-to-Noise Ratio: 105dB typical at 5V
Converter Type: Enhanced multi-level delta-sigma audio DAC
Сравнить с PCM1739EG4 →
Texas Instruments
Maximum Sampling Rate: 192 kHz
Signal-to-Noise Ratio: 132 dB
Converter Type: Stereo audio digital-to-analog converter
Сравнить с PCM1739EG4 →
Texas Instruments
Maximum Sampling Rate: 200 kHz
Product Type: Stereo audio digital-to-analog converter (DAC)
Сравнить с PCM1739EG4 →

PCM1739E

✅ Прямая замена
Texas Instruments
📦 SSOP-28
Enhanced multi-level delta-sigma audio DAC · 24 bit · 192kHz · 2 channels · 106dB typical at 5V · 105dB typical at 5V · 0.0015% typical at 5V · 3.1Vpk-pk typical

Уточнить цену

Открыть даташит →

PCM1798DBR

✅ Прямая замена
📦 SSOP-28
Same 28-pin SSOP format and 24-bit stereo DAC role; filtering and auxiliary functional details may differ while package pin count remains 28

📋 Справочный аналог (нет в каталоге)

PCM1794DBR

✅ Прямая замена ⚠️ Характеристики не проверены
Texas Instruments
📦 SSOP-28
Stereo audio digital-to-analog converter · 24 bit · 192 kHz · I2S · 132 dB · 2 channels · 28-lead SSOP · SSOP

Уточнить цену

Открыть даташит →

PCM1792DBR

✅ Прямая замена ⚠️ Характеристики не проверены
Texas Instruments
📦 SSOP-28
Stereo digital-to-analog converter · 24 bit · 192kHz · 132dB · 129dB · 127dB · 0.0004% · 7.8mA peak-to-peak

Уточнить цену

Открыть даташит →

PCM1795DBR

✅ Прямая замена ⚠️ Характеристики не проверены
Texas Instruments
📦 SSOP-28
Stereo audio digital-to-analog converter (DAC) · 32 bit · 2 channels · 200 kHz · 192 kHz · Up to 200 kHz · Advanced segment · 2 balanced current outputs

Уточнить цену

Открыть даташит →

PCM1739EG4 Максимальные параметры и электрические характеристики

Product Type Stereo audio digital-to-analog converter
Converter Architecture Multi-level delta-sigma
Разрешение 24 bit
Maximum Sampling Rate 192kHz
Signal-to-Noise Ratio 105dB
Number of Channels 2 channels
Digital Audio Interface I2S
Корпус 28-pin SSOP
Package Width 5.30mm
Package Length 0.209 inch
Тип монтажа Surface mount
Delivery Package Tube
Analog Output Configuration Stereo

Руководство по цоколевке PCM1739EG4 в корпусе tube

Цоколевка для PCM1739EG4 (корпус tube). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.

Схема цоколевки корпуса tube для PCM1739EG4

Нет подробных данных о распиновке для PCM1739EG4.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

PCM1739EG4 подходит для 6 применениеs: High-Resolution USB Audio Interface, Blu-Ray and DVD Audio Player, Network Audio Player, Digital Mixing Console, Professional Audio Monitor, Game Console and Home-Theater Audio.

🖥️

High-Resolution USB Audio Interface

The PCM1739EG4 fits a USB-to-I2S audio interface when the host controller supports 24-bit PCM at up to 192kHz. Its I2S input accepts digital stereo samples, while the two analog outputs provide left and right channels for an output amplifier. The 24-bit resolution preserves the numerical depth of the source, and the 105dB SNR supports low-noise playback of quiet recordings. Clock synchronization between the USB controller and converter is the central design constraint, so the embedded audio engine must generate a stable master clock and correctly configure the I2S frame. The converter should sit close to the analog output stage, with short ground returns and the manufacturer-recommended digital and analog supply arrangements.

📺

Blu-Ray and DVD Audio Player

PCM1739EG4 is well matched to the stereo audio path of a Blu-ray or DVD player because it supports 24-bit audio at up to 192kHz and provides two analog output channels. A digital-audio processor can route I2S data to the converter, after which the PCM1739EG4 reconstructs the left and right analog waveforms. The 105dB SNR is useful for quiet movie passages and low-level musical effects, while native high-rate support preserves the source format without mandatory sample-rate reduction. Board implementation should preserve the converter's digital timing margins, follow the prescribed filtering network, and keep analog routing away from switching regulators and processor clocks.

🌐

Network Audio Player

The PCM1739EG4 can serve as the final stereo DAC in a network audio player that accepts high-resolution PCM from a digital transport or streamer. Its 192kHz maximum rate covers high-resolution network sources, and the 24-bit data path avoids reducing the source to 16-bit before analog conversion. The 105dB SNR specification supports quiet listening in a domestic or studio environment, while the two-channel output maps naturally to a left/right amplifier pair. The design must still handle network jitter through the upstream digital-audio engine, isolate the I2S clock from analog ground currents, and implement the manufacturer's output-filter and bypass recommendations.

🎛️

Digital Mixing Console

PCM1739EG4 is applicable to a stereo monitor or auxiliary output channel in a digital mixing console because it accepts I2S audio and provides differential-capable-quality stereo conversion through the same converter. Its 24-bit resolution at up to 192kHz preserves word depth across the digital mixing section, and the 105dB SNR helps monitoring retain low-level detail. In a console, however, channel count and routing requirements often exceed two outputs, so multiple converter instances may be necessary. Each instance should use a clean digital supply, follow the prescribed analog layout, and maintain controlled clock distribution. The converter is best treated as one element in a larger signal chain rather than as a complete monitor-output subsystem.

🎧

Professional Audio Monitor

The PCM1739EG4 can serve as the stereo conversion stage of a professional near-field monitor when the digital playback chain supplies I2S audio. The converter supports 24-bit content at up to 192kHz and offers a 105dB SNR, making it appropriate for exposing low-level detail during mixing and mastering review. Its two outputs feed balanced or unbalanced amplifier inputs, with the exact implementation determined by the analog filter and output circuitry. Since professional monitors are sensitive to noise, clock jitter, ground coupling, and power-supply interference, the converter's digital and analog sections should be partitioned carefully. Validate the complete chain with the target monitor amplifier and listening environment.

🏠

Game Console and Home-Theater Audio

PCM1739EG4 is appropriate for a game console or home-theater processor that outputs stereo I2S audio and requires a 24-bit conversion path capable of 192kHz playback. The dual analog outputs support conventional left/right amplification, while the multi-level delta-sigma architecture and 105dB SNR help reproduce quiet effects and musical passages cleanly. For these systems, the converter must coexist with switching regulators, display electronics, and high-speed digital signals, making power-layout discipline essential. Keep I2S routing away from analog outputs, use the manufacturer's recommended filtering, and verify that the host supplies valid clocks during mute, startup, and source changes.

What is the PCM1739EG4?
The PCM1739EG4 is a Texas Instruments 24-bit, 192kHz stereo digital-to-analog converter using a multi-level delta-sigma architecture. It includes I2S digital audio input, two analog output channels, a 105dB signal-to-noise ratio, and a 28-pin SSOP package. According to the manufacturer product page, it is designed for high-resolution audio equipment requiring native high-rate conversion and low-noise analog outputs.
What is the sampling rate of the PCM1739EG4?
The PCM1739EG4 supports a maximum sampling rate of 192kHz with 24-bit audio data. The manufacturer product page identifies the device as a SoundPlus 24-bit, 192kHz sampling multi-level digital-to-analog converter. This rate supports high-resolution PCM sources such as DVD audio, Blu-ray content, high-rate USB streams, and professionally generated master material when the upstream source and interface also support that rate.
What is the signal-to-noise ratio of PCM1739EG4?
The PCM1739EG4 has a stated signal-to-noise ratio of 105dB. According to the Texas Instruments product page, this specification describes the stereo DAC's noise performance and supports use in audio paths where low-level signals must remain distinguishable from converter noise. Actual system noise also depends on the digital source, clocking, analog filter, output coupling, and the amplifier or load connected after the DAC.
Which digital audio interface does PCM1739EG4 use?
The PCM1739EG4 uses an I2S digital audio interface for receiving stereo PCM data from a host or audio processor. The distributor listing explicitly identifies the device as an I2S DAC, while the manufacturer describes it as a 24-bit stereo converter. The host must supply compatible clocking, channel-format selection, and valid I2S frames because incorrect frame alignment can produce severe audible distortion even when the converter itself operates correctly.
What package does PCM1739EG4 use?
The PCM1739EG4 is packaged in a 28-pin SSOP measuring 0.209 inch, or 5.30mm, in body width. The G4 ordering suffix identifies tube delivery. Its 0.209-inch package is considerably wider than common 16-pin audio DAC packages, so PCB designers must follow the manufacturer land pattern and verify courtyard clearance before releasing a board layout.
Where can I download the PCM1739EG4 datasheet?
The official PCM1739 datasheet and product information are available from the Texas Instruments product page at https://www.ti.com/product/PCM1739, with the datasheet linked through https://www.ti.com/lit/gpn/pcm1739. Use the manufacturer document for the complete pin description, electrical characteristics, application circuit, filtering guidance, and ordering information rather than relying on a distributor summary.
Where is the PCM1739EG4 pinout located?
The PCM1739EG4 pinout is shown in the pin-configuration section of the manufacturer PCM1739 datasheet. The component uses a 28-pin SSOP, and the pin descriptions should be read together with the recommended application circuit. Use those numbered assignments when creating the PCB footprint and routing the I2S interface, analog outputs, supply connections, and configuration pins.
Is PCM1739EG4 suitable for a USB audio interface?
The PCM1739EG4 is suitable for a high-resolution USB audio interface when the USB controller can deliver I2S data at the converter's supported format and rate. Its 24-bit resolution, 192kHz maximum sampling rate, and 105dB SNR suit applications that reproduce native high-rate files. The design must also handle clock synchronization, digital isolation or filtering, analog reconstruction filtering, and a low-noise output-amplifier stage.
Can PCM1739E replace PCM1739EG4?
Yes, PCM1739E is a documented pin- and package-compatible replacement candidate for PCM1739EG4. The comparison information describes its terminals and SSOP-28 package as consistent with the target while its principal performance characteristics and functional behavior remain equivalent. Confirm the exact ordering code, temperature grade, production configuration, and delivery format against the manufacturer datasheet before approving a substitution.
What can replace PCM1739EG4 on the same PCB?
PCM1739E is the closest documented drop-in candidate because the comparison information identifies matching terminals, package, functional characteristics, and principal performance parameters. Same-family Texas Instruments 28-pin SSOP DAC options may also be considered, but they can differ in digital filtering, clocking, interface mode, or analog implementation. A replacement should therefore be checked pin by pin and in the complete end-to-end audio circuit, not by package name alone.
PCM1739EG4 vs PCM1739E — which should I choose?
PCM1739EG4 and PCM1739E use the same 28-pin SSOP architecture and are described as having consistent terminals, package, functional characteristics, and principal performance. PCM1739EG4 specifically denotes the G4 tube-delivery ordering configuration. Choose the ordering suffix that matches the required production format, grade, marking, and documentation status; otherwise, PCM1739E is the more directly documented replacement candidate.
When should I choose PCM1739EG4 over a lower-resolution DAC?
Choose PCM1739EG4 when the source and interface support 24-bit audio at up to 192kHz and preserving low-level detail is important. Its 105dB SNR is better suited to high-resolution listening and professional monitoring than a lower-resolution or lower-SNR converter. It may be unnecessary when the upstream system is limited to 16-bit, 44.1kHz CD-quality content and a simpler DAC already meets the required noise and bandwidth.
Is PCM1739EG4 suitable for Blu-ray and DVD audio players?
The PCM1739EG4 is well suited to Blu-ray and DVD audio players because it supports 24-bit audio at up to 192kHz through an I2S interface. Its two-channel output configuration fits stereo playback paths, while the multi-level delta-sigma architecture and 105dB SNR support low-distortion reconstruction. The complete design still requires correct clocking, suitable digital filtering, an analog reconstruction network, and a low-noise output stage.
How is PCM1739EG4 packaged for production ordering?
PCM1739EG4 is ordered in a 28-pin SSOP and is identified by the G4 suffix as tube packaging. The manufacturer ordering table should be used to confirm reel, tray, or tube availability and any grade-specific suffix. Tube delivery is suitable for automated pick-and-place or prototype assembly when the production line handles that format; otherwise, use the corresponding manufacturer-approved packaging option without changing the functional part number.
Where to buy PCM1739EG4 and what is its price?
Use the Request a Quote form on this page to request PCM1739EG4 pricing, current inventory, minimum order quantity, and production lead time. The form lets the purchasing team confirm the exact 28-pin SSOP and G4 tube ordering configuration without presenting a stale or mismatched catalog price. Availability and delivery scheduling should be confirmed for the quantity and shipment date required by your build schedule.
What is the lead time for PCM1739EG4?
Current PCM1739EG4 lead time should be requested through the Request a Quote form on this page. The quantity, packaging format, and required delivery date determine the production schedule, so a generic availability statement is not sufficient for planning. The manufacturer identifies the device as orderable, and the G4 suffix specifies tube delivery for the exact PCM1739EG4 ordering code.

Справочные инженерные данные для PCM1739EG4 — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose PCM1739EG4 for a stereo audio path that accepts I2S data, supports 24-bit content at up to 192kHz, and needs a stated 105dB SNR. PCM1739E is the first replacement candidate when the same SSOP-28 footprint and converter behavior are required, but the exact ordering suffix, grade, marking, and delivery format should be confirmed. PCM1798DBR, PCM1794DBR, PCM1792DBR, and PCM1795DBR use the same 28-pin family package, making them possible PCB-level choices; however, identical resolution and sample rate do not guarantee identical clocking, filtering, mode-control, or auxiliary-pin behavior. Review every pin and the end-to-end audio schematic before substitution. For designs requiring only 16-bit or 44.1kHz audio, a simpler DAC may provide adequate performance with less complexity. For industrial or automotive products, check the operating-temperature and qualification requirements for the exact ordering code.

Сравнение с аналогами

Параметр Этот товар PCM1739E PCM1798DBR PCM1794DBR PCM1792DBR PCM1795DBR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package SSOP-28 SSOP-28 - same SSOP-28 - same SSOP-28 - same SSOP-28 - same SSOP-28 - same
Maximum Sampling Rate 192kHz 192kHz 192kHz 192kHz 192kHz 192kHz
Output Channels 2 channels 2 channels 2 channels 2 channels 2 channels 2 channels
Pin Count 28 pins 28 pins 28 pins 28 pins 28 pins 28 pins

Ключевые отличия

  • High-rate 24-bit stereo conversion in one compact converter (против PCM1739E)
  • Explicit 105dB SNR specification for low-level audio reproduction (против PCM1798DBR)
  • Multi-level delta-sigma conversion supports native high-resolution playback (против PCM1754DBQR)

Заметки по проектированию

Use the manufacturer land pattern for the 28-pin SSOP and preserve adequate clearance from surrounding circuitry. The body is 0.209 inch wide, so pin density is substantially higher than in a conventional 16-pin audio DAC. Place input, output, and decoupling connections according to the datasheet application diagram, and route the I2S clock and data away from the analog output traces to reduce coupling into the reconstructed audio waveform.

Drive the converter with a clean, stable master clock and correctly aligned I2S frames. A converter that receives valid serial data but incorrect frame timing can still produce severe playback errors. Follow the manufacturer timing diagrams for setup and hold requirements, avoid adding unnecessary series resistance unless the source impedance requires it, and keep clock distribution away from the analog outputs. Validate the interface across startup, mute, and source-rate transitions.

Do not substitute a same-family DAC based only on its SSOP-28 outline. PCM1739-family devices can differ in clock requirements, digital filtering, interface modes, and auxiliary functions even when they share the same package. Compare every numbered terminal in the manufacturer pin tables and verify the supply, analog-filter, mode-selection, and bypass requirements before approving a drop-in replacement.

Implement the manufacturer's analog reconstruction and filtering network close to the output pins, and maintain a continuous analog ground return without crossing it beneath noisy digital or switching-current paths. Decoupling capacitors should be placed directly at the specified supply pins with short traces and low loop area. Keep the two stereo outputs symmetrical where possible so that timing, grounding, and filtering differences do not create an avoidable channel imbalance.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The manufacturer product page does not present explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status in the cited content. Confirm these attributes for the exact PCM1739EG4 ordering code before regulatory submission.

Данные проверены: 2026-11-15 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

PCM1739EG4 datasheet PCM1739EG4 datasheet pdf PCM1739EG4 pinout PCM1739EG4 schematic PCM1739EG4 application circuit PCM1739EG4 SSOP-28 footprint PCM1739EG4 equivalent PCM1739EG4 replacement PCM1739EG4 cross reference PCM1739EG4 vs PCM1739E Texas Instruments PCM1739EG4 PCM1739EG4 price PCM1739EG4 stock 24-bit 192kHz stereo DAC SSOP-28

Связанные компоненты & термины

Texas Instruments PCM1739EG4 PCM1739E PCM1798DBR PCM1794DBR PCM1792DBR PCM1795DBR digital-to-analog converter DAC delta-sigma DAC multi-level delta-sigma architecture audio converter I2S 24-bit resolution 192kHz sampling rate 105dB signal-to-noise ratio stereo audio SSOP-28 surface mount RoHS REACH AEC-Q100 USB audio interface Blu-ray audio
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ