PCM1739EG4 - 24-Bit 192kHz Stereo DAC | Texas Instruments
MPN: PCM1739EG4 ✓ Hoạt độngPCM1739EG4 Tóm tắt
A DAC is a semiconductor that converts digital audio samples into proportional analog voltages for amplification and loudspeaker drive. PCM1739 belongs to the delta-sigma DAC family within the broader audio converter hierarchy, where resolution determines numerical sample detail while the sampling rate controls the highest reproducible audio bandwidth.
The PCM1739EG4 supports 24-bit audio at up to 192kHz and provides two output channels for stereo audio equipment. Its 105dB SNR specification indicates a low-noise conversion path, while the multi-level architecture reduces quantization-related distortion. The 28-pin SSOP package supports conventional surface-mount assembly, although the narrow lead pitch requires careful PCB layout and inspection.
PCM1739EG4 is designed for digital audio systems that need both high sample-rate support and low-noise analog conversion. Its I2S interface makes it suitable for systems using a digital audio processor, USB audio interface, Blu-ray player, game console, or home-audio controller. Stereo outputs support left and right channels for consumer and professional listening equipment.
Typical uses include high-resolution network players, USB audio interfaces, CD and DVD players, digital mixing consoles, surround-sound processors, and audio evaluation boards. The 192kHz capability is useful for native high-resolution source material, while the 105dB SNR supports quiet passages and low-level musical details.
Designers should treat this converter as a precision analog component. Use the digital interface timing and analog output filtering guidance in the manufacturer datasheet, maintain short return paths for the analog outputs, and provide stable reference and power connections. Tube packaging is identified by the G4 ordering code, so production planning should include appropriate handling and incoming inspection.
This product page consolidates the key electrical and packaging characteristics, practical application guidance, verified lifecycle information, and pin-compatible replacement analysis to support faster component selection and PCB design.
Bộ thay thế dễ dàng lắp đặt cho PCM1739EG4 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PCM1739EG4 (cùng hình factor và footprint) — khác nhau ở Maximum Sampling Rate, Signal-to-Noise Ratio, Converter Type, Product Type.
PCM1739E
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PCM1798DBR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PCM1794DBR
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →PCM1792DBR
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →PCM1795DBR
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →PCM1739EG4 Tỷ lệ tối đa & tính chất điện
| Product Type | Stereo audio digital-to-analog converter |
| Converter Architecture | Multi-level delta-sigma |
| Độ phân giải | 24 bit |
| Maximum Sampling Rate | 192kHz |
| Signal-to-Noise Ratio | 105dB |
| Number of Channels | 2 channels |
| Digital Audio Interface | I2S |
| Hộp | 28-pin SSOP |
| Package Width | 5.30mm |
| Package Length | 0.209 inch |
| Kiểu lắp đặt | Surface mount |
| Delivery Package | Tube |
| Analog Output Configuration | Stereo |
Hướng dẫn cấu hình chân PCM1739EG4 tube
Cấu hình chân cho PCM1739EG4 (tube gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho PCM1739EG4.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
PCM1739EG4 phù hợp cho 6 Áp dụngs: High-Resolution USB Audio Interface, Blu-Ray and DVD Audio Player, Network Audio Player, Digital Mixing Console, Professional Audio Monitor, Game Console and Home-Theater Audio.
High-Resolution USB Audio Interface
The PCM1739EG4 fits a USB-to-I2S audio interface when the host controller supports 24-bit PCM at up to 192kHz. Its I2S input accepts digital stereo samples, while the two analog outputs provide left and right channels for an output amplifier. The 24-bit resolution preserves the numerical depth of the source, and the 105dB SNR supports low-noise playback of quiet recordings. Clock synchronization between the USB controller and converter is the central design constraint, so the embedded audio engine must generate a stable master clock and correctly configure the I2S frame. The converter should sit close to the analog output stage, with short ground returns and the manufacturer-recommended digital and analog supply arrangements.
Được đề xuất
Blu-Ray and DVD Audio Player
PCM1739EG4 is well matched to the stereo audio path of a Blu-ray or DVD player because it supports 24-bit audio at up to 192kHz and provides two analog output channels. A digital-audio processor can route I2S data to the converter, after which the PCM1739EG4 reconstructs the left and right analog waveforms. The 105dB SNR is useful for quiet movie passages and low-level musical effects, while native high-rate support preserves the source format without mandatory sample-rate reduction. Board implementation should preserve the converter's digital timing margins, follow the prescribed filtering network, and keep analog routing away from switching regulators and processor clocks.
Được đề xuất
Network Audio Player
The PCM1739EG4 can serve as the final stereo DAC in a network audio player that accepts high-resolution PCM from a digital transport or streamer. Its 192kHz maximum rate covers high-resolution network sources, and the 24-bit data path avoids reducing the source to 16-bit before analog conversion. The 105dB SNR specification supports quiet listening in a domestic or studio environment, while the two-channel output maps naturally to a left/right amplifier pair. The design must still handle network jitter through the upstream digital-audio engine, isolate the I2S clock from analog ground currents, and implement the manufacturer's output-filter and bypass recommendations.
Được đề xuất
Digital Mixing Console
PCM1739EG4 is applicable to a stereo monitor or auxiliary output channel in a digital mixing console because it accepts I2S audio and provides differential-capable-quality stereo conversion through the same converter. Its 24-bit resolution at up to 192kHz preserves word depth across the digital mixing section, and the 105dB SNR helps monitoring retain low-level detail. In a console, however, channel count and routing requirements often exceed two outputs, so multiple converter instances may be necessary. Each instance should use a clean digital supply, follow the prescribed analog layout, and maintain controlled clock distribution. The converter is best treated as one element in a larger signal chain rather than as a complete monitor-output subsystem.
Được đề xuất
Professional Audio Monitor
The PCM1739EG4 can serve as the stereo conversion stage of a professional near-field monitor when the digital playback chain supplies I2S audio. The converter supports 24-bit content at up to 192kHz and offers a 105dB SNR, making it appropriate for exposing low-level detail during mixing and mastering review. Its two outputs feed balanced or unbalanced amplifier inputs, with the exact implementation determined by the analog filter and output circuitry. Since professional monitors are sensitive to noise, clock jitter, ground coupling, and power-supply interference, the converter's digital and analog sections should be partitioned carefully. Validate the complete chain with the target monitor amplifier and listening environment.
Được đề xuất
Game Console and Home-Theater Audio
PCM1739EG4 is appropriate for a game console or home-theater processor that outputs stereo I2S audio and requires a 24-bit conversion path capable of 192kHz playback. The dual analog outputs support conventional left/right amplification, while the multi-level delta-sigma architecture and 105dB SNR help reproduce quiet effects and musical passages cleanly. For these systems, the converter must coexist with switching regulators, display electronics, and high-speed digital signals, making power-layout discipline essential. Keep I2S routing away from analog outputs, use the manufacturer's recommended filtering, and verify that the host supplies valid clocks during mute, startup, and source changes.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PCM1739EG4 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PCM1739E | PCM1798DBR | PCM1794DBR | PCM1792DBR | PCM1795DBR |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | SSOP-28 | SSOP-28 - same | SSOP-28 - same | SSOP-28 - same | SSOP-28 - same | SSOP-28 - same |
| Maximum Sampling Rate | 192kHz | 192kHz | 192kHz | 192kHz | 192kHz | 192kHz |
| Output Channels | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Pin Count | 28 pins | 28 pins | 28 pins | 28 pins | 28 pins | 28 pins |
Bảo phân biệt quan trọng
- High-rate 24-bit stereo conversion in one compact converter (vsPCM1739E)
- Explicit 105dB SNR specification for low-level audio reproduction (vsPCM1798DBR)
- Multi-level delta-sigma conversion supports native high-resolution playback (vsPCM1754DBQR)
Ghi chú thiết kế
Use the manufacturer land pattern for the 28-pin SSOP and preserve adequate clearance from surrounding circuitry. The body is 0.209 inch wide, so pin density is substantially higher than in a conventional 16-pin audio DAC. Place input, output, and decoupling connections according to the datasheet application diagram, and route the I2S clock and data away from the analog output traces to reduce coupling into the reconstructed audio waveform.
Drive the converter with a clean, stable master clock and correctly aligned I2S frames. A converter that receives valid serial data but incorrect frame timing can still produce severe playback errors. Follow the manufacturer timing diagrams for setup and hold requirements, avoid adding unnecessary series resistance unless the source impedance requires it, and keep clock distribution away from the analog outputs. Validate the interface across startup, mute, and source-rate transitions.
Do not substitute a same-family DAC based only on its SSOP-28 outline. PCM1739-family devices can differ in clock requirements, digital filtering, interface modes, and auxiliary functions even when they share the same package. Compare every numbered terminal in the manufacturer pin tables and verify the supply, analog-filter, mode-selection, and bypass requirements before approving a drop-in replacement.
Implement the manufacturer's analog reconstruction and filtering network close to the output pins, and maintain a continuous analog ground return without crossing it beneath noisy digital or switching-current paths. Decoupling capacitors should be placed directly at the specified supply pins with short traces and low loop area. Keep the two stereo outputs symmetrical where possible so that timing, grounding, and filtering differences do not create an avoidable channel imbalance.
Thông tin tuân thủ
The manufacturer product page does not present explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status in the cited content. Confirm these attributes for the exact PCM1739EG4 ordering code before regulatory submission.