PCM3001E/2K - 18-Bit Stereo Audio Codec | Texas Instruments
Артикул: PCM3001E/2K ✓ АктивенPCM3001E/2K Обзор
An audio codec is an interface IC that converts analog audio signals into digital data and digital audio data back into analog signals. Within the broader semiconductor hierarchy, the PCM3001E/2K belongs to the audio codec family, which sits under audio interface ICs and interface semiconductors. Its integrated ADC and DAC functions reduce the number of separate converters required in a stereo signal chain while preserving a shared digital audio architecture.
The device provides 18-bit stereo conversion, two ADC channels, two DAC channels, and single-ended analog inputs and outputs. Its digital interface is serial, allowing audio data to be transferred between the codec and a digital signal processor, microcontroller, or other audio host. The manufacturer identifies the part as a stereo codec with hardware line-output control, which supports systems requiring analog-output muting or output-path management through hardware control.
The PCM3001E/2K is intended for cost-conscious stereo audio equipment where one IC must perform both conversion directions. Its 28-pin SSOP package provides a compact surface-mount footprint while exposing separate analog, digital, power, and control functions. Designers should allocate the board area and decoupling strategy required by the manufacturer application information, especially around analog supply and ground pins.
Typical uses include consumer audio equipment, compact stereo playback systems, sound-card analog front ends, multimedia peripherals, and embedded audio products requiring single-ended analog connections. The integrated two-channel ADC and two-channel DAC arrangement allows a system to process captured audio digitally and return processed or stored audio through a line-level output stage.
A critical design consideration is maintaining clean, low-impedance analog and digital returns. Follow the pin-description table in the Texas Instruments PCM3001 datasheet when assigning tracks, and place the required bypass capacitors close to their associated supply pins. Keep digital clock and data routes away from the analog input and output paths to reduce crosstalk and conversion error.
This page consolidates the device identity, conversion architecture, package details, practical design guidance, and pin-compatible family options for engineers evaluating the PCM3001E/2K. It is intended to support design review, footprint planning, and replacement assessment before the complete Texas Instruments datasheet is consulted for circuit implementation.
Аналоги без доработки для PCM3001E/2K — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PCM3001E/2K (тот же форм-фактор и посадочное место) — отличается по Digital Audio Interface, Package, Package Type.
PCM3001EG/2K
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PCM3001E
✅ Прямая заменаУточнить цену
Открыть даташит →PCM3001E
✅ Прямая заменаУточнить цену
Открыть даташит →PCM3001EG4
✅ Прямая заменаУточнить цену
Открыть даташит →PCM3001E/2KG4
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PCM3001E/2K Характеристики
| Product Type | Stereo audio codec |
| Converter Resolution | 18 bit |
| ADC Channels | 2 channels |
| DAC Channels | 2 channels |
| Analog Input Type | Single-ended |
| Analog Output Type | Single-ended |
| Digital Audio Interface | Serial interface |
| Line Output Control | Hardware control |
| Корпус | 28-pin SSOP (DB) |
| Package Type | Small-outline shrink pitch surface-mount package |
| Тип монтажа | Surface mount |
| Manufacturer | Texas Instruments |
| Статус RoHS | Compliant |
| Standard Tape Quantity | 2000 pieces |
Руководство по цоколевке PCM3001E/2K в корпусе small-outline shrink pitch surface-mount package
Цоколевка для PCM3001E/2K (корпус small-outline shrink pitch surface-mount package). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.
Нет подробных данных о распиновке для PCM3001E/2K.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
PCM3001E/2K подходит для 6 применениеs: Compact Stereo Audio Capture, Digital-to-Analog Playback, Multimedia Audio Interface, Consumer Audio Equipment, Sound Card Analog Front End, Embedded Audio Processing.
Compact Stereo Audio Capture
The PCM3001E/2K fits compact stereo capture equipment because it combines two 18-bit ADCs with a serial digital audio interface in one 28-pin SSOP. Two single-ended analog inputs can feed the integrated converters when the source levels match the supported input range. The serial interface then transfers both channels to a digital signal processor, microcontroller, or recording controller. Integrating capture into the codec reduces the number of separate ADC packages, while designers should preserve analog isolation from clock and data routing to minimize crosstalk and conversion error.
Рекомендуется
Digital-to-Analog Playback
The PCM3001E/2K supports digital-to-analog playback with two 18-bit DAC channels and single-ended analog outputs. A digital audio host can send interleaved stereo data through the serial interface, allowing the codec to reconstruct left and right analog channels in a compact playback assembly. Hardware line-output control provides an additional output-management path for systems that require muting or controlled line output. Confirm output loading, reference requirements, and analog output levels before adding any external amplification stage.
Рекомендуется
Multimedia Audio Interface
The PCM3001E/2K is appropriate for multimedia peripherals that both capture and play stereo audio without using separate converter ICs. Its two ADC channels accept analog sources, while its two DAC channels return processed digital audio through single-ended outputs. The integrated architecture can simplify routing in a sound-card, docking-station, or USB-audio accessory. The 18-bit serial path should be clocked according to the manufacturer requirements, and analog return paths should remain short to avoid degrading captured or reproduced signals.
Рекомендуется
Consumer Audio Equipment
The PCM3001E/2K is well suited to compact consumer audio products requiring bidirectional stereo conversion at modest board cost. Its two ADC channels can digitize microphones or line-level sources after suitable conditioning, and its two DAC channels can support analog playback into a line-output stage. Using one codec for both directions can reduce board area in portable speakers, audio consoles, and connected media accessories. Validate the analog input range, output impedance, and required filtering against the intended source and load before production release.
Рекомендуется
Sound Card Analog Front End
A sound-card analog front end can use the PCM3001E/2K to convert two incoming analog channels into 18-bit digital samples for a host processor. The device's dual ADC architecture matches stereo line-level inputs, while the serial interface provides a compact connection to digital audio logic. Designers should implement input attenuation or gain as required, provide suitable analog grounding, and follow the manufacturer bypass recommendations. Keeping the serial clock away from the input nodes is especially important in a precision-oriented sound-card layout.
Рекомендуется
Embedded Audio Processing
The PCM3001E/2K can serve as the analog conversion boundary in an embedded audio system where a processor handles mixing, effects, storage, or communications. Two 18-bit ADC channels capture stereo sources, and two 18-bit DAC channels return the processed result through single-ended analog outputs. The integrated codec simplifies the signal-chain partitioning compared with separate converter ICs. Firmware and hardware must agree on the serial format, clock relationships, sample rate, and supported operating modes described by Texas Instruments.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PCM3001E/2K — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PCM3001EG/2K | PCM3001E | PCM3001 | PCM3001EG4 | PCM3001E/2KG4 |
|---|---|---|---|---|---|---|
| Package | 28-pin SSOP (DB) | 28-pin SSOP (DB) | 28-pin SSOP (DB) | 28-pin SSOP (DB) | 28-pin SSOP (DB) | 28-pin SSOP (DB) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Product Type | Stereo audio codec | Stereo audio codec | Stereo audio codec | Stereo audio codec | Stereo audio codec | Stereo audio codec |
Ключевые отличия
- Matches the closest listed family option in all identified core conversion parameters (против PCM3001EG/2K)
- Provides the identified 2000-piece order configuration (против PCM3001EG4)
- Combines stereo capture and playback in one 28-pin package (против PCM3001)
Заметки по проектированию
Separate analog and digital return paths and route the serial clock and data away from the single-ended input and output pins. Use the Texas Instruments PCM3001 datasheet land pattern and recommended component placement for the 28-pin SSOP. Decoupling capacitors should be positioned directly at the corresponding supply pins, with the analog section kept free of high-current digital return paths.
Treat the serial interface as a clocked digital subsystem with dedicated return routing. Confirm the supported master-clock relationship, sample rate, and serial format before connecting a processor or DSP. Avoid long parallel runs near the analog inputs, and use a continuous ground reference beneath the device so switching currents do not add voltage across the sensitive analog return path.
Do not assume that every PCM3001 family ordering code is interchangeable without checking the suffix-specific ordering table. PCM3001E/2K, PCM3001EG/2K, PCM3001E, PCM3001EG4, and PCM3001E/2KG4 share the 28-pin SSOP format, but reel configuration, order quantity, and qualification attributes can differ. Verify the pin assignment, electrical limits, supply requirements, and package orientation before approving a substitution.
Информация о соответствии
The PCM3001E/2K is identified as RoHS compliant. No separate REACH, halogen-free, conflict-minerals, or automotive-qualification statement is established for this ordering code.