Texas Instruments

PCM3001E/2K - 18-Bit Stereo Audio Codec | Texas Instruments

MPN: PCM3001E/2K ✓ פעיל
28-pin SSOP (DB) Package
כמות הזמנה מינימלית: 1 |

PCM3001E/2K סקירה

The Texas Instruments PCM3001E/2K is an 18-bit stereo audio codec with two analog-to-digital converters, two digital-to-analog converters, and a serial digital audio interface in a 28-pin SSOP package. It combines single-ended analog input and output stages in one device, making it suitable for compact stereo audio systems that require bidirectional analog-to-digital and digital-to-analog conversion.

An audio codec is an interface IC that converts analog audio signals into digital data and digital audio data back into analog signals. Within the broader semiconductor hierarchy, the PCM3001E/2K belongs to the audio codec family, which sits under audio interface ICs and interface semiconductors. Its integrated ADC and DAC functions reduce the number of separate converters required in a stereo signal chain while preserving a shared digital audio architecture.

The device provides 18-bit stereo conversion, two ADC channels, two DAC channels, and single-ended analog inputs and outputs. Its digital interface is serial, allowing audio data to be transferred between the codec and a digital signal processor, microcontroller, or other audio host. The manufacturer identifies the part as a stereo codec with hardware line-output control, which supports systems requiring analog-output muting or output-path management through hardware control.

The PCM3001E/2K is intended for cost-conscious stereo audio equipment where one IC must perform both conversion directions. Its 28-pin SSOP package provides a compact surface-mount footprint while exposing separate analog, digital, power, and control functions. Designers should allocate the board area and decoupling strategy required by the manufacturer application information, especially around analog supply and ground pins.

Typical uses include consumer audio equipment, compact stereo playback systems, sound-card analog front ends, multimedia peripherals, and embedded audio products requiring single-ended analog connections. The integrated two-channel ADC and two-channel DAC arrangement allows a system to process captured audio digitally and return processed or stored audio through a line-level output stage.

A critical design consideration is maintaining clean, low-impedance analog and digital returns. Follow the pin-description table in the Texas Instruments PCM3001 datasheet when assigning tracks, and place the required bypass capacitors close to their associated supply pins. Keep digital clock and data routes away from the analog input and output paths to reduce crosstalk and conversion error.

This page consolidates the device identity, conversion architecture, package details, practical design guidance, and pin-compatible family options for engineers evaluating the PCM3001E/2K. It is intended to support design review, footprint planning, and replacement assessment before the complete Texas Instruments datasheet is consulted for circuit implementation.

חלופות תחליף ישיר עבור PCM3001E/2K — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם PCM3001E/2K (אותו גורם צורה וטביעת רגל) — שונים ב Digital Audio Interface, Package, Package Type.

Texas Instruments
Digital Audio Interface: Serial
Package Type: 28-pin SSOP
Texas Instruments
Package: 28-pin SSOP

PCM3001EG/2K

✅ Drop-In
📦 28-pin SSOP (DB)
Same 18-bit resolution, two ADC channels, two DAC channels, and 28-pin SSOP configuration; ordering and environmental attributes differ by 0% in the stated core conversion parameters.

📋 חלופה להתייחסות (לא בקטלוג)

PCM3001E

✅ Drop-In
Texas Instruments
📦 28-pin SSOP (DB)
Stereo audio codec · 18 bit · 2 channel stereo · Single-ended · Single-ended · 2 ADC · 2 DAC · Serial

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

PCM3001E

✅ Drop-In
Texas Instruments
📦 28-pin SSOP (DB)
Stereo audio codec · 18 bit · 2 channel stereo · Single-ended · Single-ended · 2 ADC · 2 DAC · Serial

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

PCM3001EG4

✅ Drop-In
Texas Instruments
📦 28-pin SSOP (DB)
Stereo audio codec · 18 bit · 18 bit · 2 channels · 2 channels · 2 channels · 2 channels · 18-bit serial interface

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

PCM3001E/2KG4

✅ Drop-In
📦 28-pin SSOP (DB)
Same PCM3001E/2K-family 18-bit stereo codec and 28-pin SSOP footprint; order quantity and ordering suffix differ from 2000 pieces.

📋 חלופה להתייחסות (לא בקטלוג)

PCM3001E/2K מפרטים

Product Type Stereo audio codec
Converter Resolution 18 bit
ADC Channels 2 channels
DAC Channels 2 channels
Analog Input Type Single-ended
Analog Output Type Single-ended
Digital Audio Interface Serial interface
Line Output Control Hardware control
מארז 28-pin SSOP (DB)
Package Type Small-outline shrink pitch surface-mount package
סוג הרכבה Surface mount
Manufacturer Texas Instruments
סטטוס RoHS Compliant
Standard Tape Quantity 2000 pieces

מדריך תצורת פינים של PCM3001E/2K small-outline shrink pitch surface-mount package

תצורת פינים עבור PCM3001E/2K (מארזת small-outline shrink pitch surface-mount package). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת small-outline shrink pitch surface-mount package עבור PCM3001E/2K

אין נתוני פריסת פינים מפורטים עבור PCM3001E/2K.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

PCM3001E/2K מתאים עבור 6 יישוםs: Compact Stereo Audio Capture, Digital-to-Analog Playback, Multimedia Audio Interface, Consumer Audio Equipment, Sound Card Analog Front End, Embedded Audio Processing.

🎧

Compact Stereo Audio Capture

The PCM3001E/2K fits compact stereo capture equipment because it combines two 18-bit ADCs with a serial digital audio interface in one 28-pin SSOP. Two single-ended analog inputs can feed the integrated converters when the source levels match the supported input range. The serial interface then transfers both channels to a digital signal processor, microcontroller, or recording controller. Integrating capture into the codec reduces the number of separate ADC packages, while designers should preserve analog isolation from clock and data routing to minimize crosstalk and conversion error.

🔊

Digital-to-Analog Playback

The PCM3001E/2K supports digital-to-analog playback with two 18-bit DAC channels and single-ended analog outputs. A digital audio host can send interleaved stereo data through the serial interface, allowing the codec to reconstruct left and right analog channels in a compact playback assembly. Hardware line-output control provides an additional output-management path for systems that require muting or controlled line output. Confirm output loading, reference requirements, and analog output levels before adding any external amplification stage.

🖥️

Multimedia Audio Interface

The PCM3001E/2K is appropriate for multimedia peripherals that both capture and play stereo audio without using separate converter ICs. Its two ADC channels accept analog sources, while its two DAC channels return processed digital audio through single-ended outputs. The integrated architecture can simplify routing in a sound-card, docking-station, or USB-audio accessory. The 18-bit serial path should be clocked according to the manufacturer requirements, and analog return paths should remain short to avoid degrading captured or reproduced signals.

📱

Consumer Audio Equipment

The PCM3001E/2K is well suited to compact consumer audio products requiring bidirectional stereo conversion at modest board cost. Its two ADC channels can digitize microphones or line-level sources after suitable conditioning, and its two DAC channels can support analog playback into a line-output stage. Using one codec for both directions can reduce board area in portable speakers, audio consoles, and connected media accessories. Validate the analog input range, output impedance, and required filtering against the intended source and load before production release.

🎚️

Sound Card Analog Front End

A sound-card analog front end can use the PCM3001E/2K to convert two incoming analog channels into 18-bit digital samples for a host processor. The device's dual ADC architecture matches stereo line-level inputs, while the serial interface provides a compact connection to digital audio logic. Designers should implement input attenuation or gain as required, provide suitable analog grounding, and follow the manufacturer bypass recommendations. Keeping the serial clock away from the input nodes is especially important in a precision-oriented sound-card layout.

🧩

Embedded Audio Processing

The PCM3001E/2K can serve as the analog conversion boundary in an embedded audio system where a processor handles mixing, effects, storage, or communications. Two 18-bit ADC channels capture stereo sources, and two 18-bit DAC channels return the processed result through single-ended analog outputs. The integrated codec simplifies the signal-chain partitioning compared with separate converter ICs. Firmware and hardware must agree on the serial format, clock relationships, sample rate, and supported operating modes described by Texas Instruments.

סיכום מוצרים מומלצים

PCM3001 Related PCM3001-family stereo codec בשימוש ב-: Compact Stereo Audio Capture, Digital-to-Analog Playback, Sound Card Analog Front End PCM3001E Texas Instruments בשימוש ב-: Compact Stereo Audio Capture, Multimedia Audio Interface, Sound Card Analog Front End PCM3001EG/2K Pin-compatible family option for stereo conversion בשימוש ב-: Digital-to-Analog Playback, Consumer Audio Equipment, Embedded Audio Processing PCM3001EG4 Texas Instruments בשימוש ב-: Multimedia Audio Interface, Embedded Audio Processing PCM3001E/2KG4 Related PCM3001E family ordering option בשימוש ב-: Consumer Audio Equipment
What is the PCM3001E/2K?
The PCM3001E/2K is an 18-bit stereo audio codec from Texas Instruments with two ADCs, two DACs, and a serial digital audio interface. It accepts single-ended analog audio inputs and produces single-ended analog outputs. According to the Texas Instruments PCM3001 datasheet and product information, the device integrates both conversion directions in a 28-pin SSOP package, reducing the component count in compact stereo audio designs.
What are the key specifications of PCM3001E/2K that engineers should know?
The PCM3001E/2K provides 18-bit conversion, two ADC channels, two DAC channels, a serial digital interface, and single-ended analog input and output. Texas Instruments packages the device in a 28-pin SSOP with hardware line-output control. The principal design considerations are the exact supported sample rates, clocking configuration, analog input range, output range, supply requirements, and reference arrangement specified in the manufacturer datasheet.
Where can I download the PCM3001E/2K datasheet PDF?
The official PCM3001 datasheet is available through the Texas Instruments PCM3001 product page, which links to the manufacturer documentation. The product page is the preferred source for the current ordering information, data sheet, pin descriptions, and application guidance. Download the manufacturer PDF rather than relying on a third-party mirror so that revision status, package information, and electrical limits match the selected device.
Where can I find the PCM3001E/2K pinout?
The PCM3001E/2K pinout is documented in the Texas Instruments PCM3001 datasheet and on the TI product page for the device. The part uses a 28-pin SSOP package, so the document includes separate analog, digital, power, ground, clock, and control assignments. Use the pin-description table when routing the PCB because exposed analog and digital functions should follow the manufacturer layout recommendations.
Is the PCM3001E/2K suitable for stereo audio capture and playback?
Yes, the PCM3001E/2K is designed for stereo capture and playback because it combines two ADC channels, two DAC channels, and an 18-bit serial conversion path. It suits compact systems with single-ended analog connections, including multimedia equipment and audio peripherals. Confirm the required input and output levels, clocking scheme, and sample rate against the manufacturer electrical specifications before finalizing the analog signal chain.
What can replace the PCM3001E/2K?
PCM3001EG/2K is the closest listed family alternative because it retains the 18-bit stereo codec configuration, two ADC channels, two DAC channels, 28-pin SSOP package, and serial interface. PCM3001E and PCM3001EG/2K also use the same package format, but ordering codes, packaging details, or qualification attributes must be checked before treating any variant as a production replacement.
Can PCM3001EG/2K replace PCM3001E/2K?
PCM3001EG/2K can be considered for a drop-in-style PCB review because it is described as an 18-bit, two-ADC, two-DAC stereo codec in a 28-pin SSOP package. Its pin assignment and electrical limits should still be compared with the target device in the Texas Instruments datasheets. Confirm ordering suffix, reel configuration, and any environmental or qualification differences before approving it as a substitute.
PCM3001E/2K vs PCM3001EG/2K: which is better for a new design?
Both parts are presented as 18-bit stereo codecs with two ADCs, two DACs, a serial digital interface, and a 28-pin SSOP package, so their core conversion roles are closely aligned. Choose PCM3001E/2K when it is the approved ordering option for the target build. Choose PCM3001EG/2K only after confirming that its ordering attributes, package orientation, and supply-chain requirements are preferable for the production program.
When should I choose PCM3001E/2K over another stereo audio codec?
Choose PCM3001E/2K when a design needs an integrated 18-bit stereo ADC and DAC, a serial digital audio path, and single-ended analog connections in a 28-pin SSOP. It is particularly appropriate when reducing the number of separate converter ICs matters. Select a different codec if the system requires a different resolution, interface format, package, channel count, automotive qualification, or integrated digital signal processing.
Is PCM3001E/2K the same as PCM3001E?
PCM3001E/2K and PCM3001E are both identified as 18-bit stereo audio codecs in 28-pin SSOP packages, but the full ordering codes can differ in packaging or orderable attributes. Treat them as related family members rather than automatically identical. Check the TI ordering table for the exact reel configuration, quantity, and any suffix-specific differences before substitution.
Where can I buy PCM3001E/2K online?
Use the Request a Quote form on this page to ask for PCM3001E/2K availability, quantity, and current lead time. The form allows the exact manufacturer part number and required quantity to be reviewed without relying on a generic category listing. Confirm authorized sourcing, date code, and delivery terms as part of the quotation response before placing a production order.
What is the price of PCM3001E/2K?
The current PCM3001E/2K quotation is handled through the Request a Quote form on this page. Enter the required part quantity and application details so the order can be evaluated for availability, packaging, and delivery. This avoids publishing a stale figure for a catalog component whose commercial terms may change with quantity and market conditions.
What is the lead time for PCM3001E/2K?
The current lead time for PCM3001E/2K should be requested through the Request a Quote form on this page. Include the required quantity, reel or tray preference, target date, and destination so the production commitment can reflect the actual order. Stock status should also be confirmed before committing a build schedule to this device.
Is PCM3001E/2K in stock?
PCM3001E/2K inventory status should be confirmed through the Request a Quote form on this page for the required quantity. Availability can change with order volume and packaging configuration, so a general category indication is not sufficient for production planning. The quotation response should identify available stock, scheduled delivery, and any lot or date-code conditions.
What is the best cross-brand equivalent for PCM3001E/2K?
No cross-brand drop-in replacement is established by the current manufacturer and distributor information, so the PCM3001E/2K should be retained for an existing 28-pin SSOP design. A different manufacturer's stereo codec may provide similar conversion functions but can differ in pinout, clocking, supply voltage, digital format, and analog levels. Treat such devices as redesign candidates rather than automatic drop-in replacements.

נתוני עזר הנדסיים עבור PCM3001E/2K — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose PCM3001E/2K for a compact stereo design that needs two 18-bit ADC channels, two 18-bit DAC channels, a serial digital interface, and single-ended analog connections in a 28-pin SSOP package. It is particularly useful when combining capture and playback in one IC reduces board area and component count. PCM3001EG/2K is the closest listed family option for PCB reuse, while PCM3001E and PCM3001E/2KG4 can be evaluated when their specific ordering suffix, reel format, or order quantity is preferable. PCM3001EG4 may suit prototype or small-lot requirements but is associated with only 47 pieces compared with the 2000-piece quantity of PCM3001E/2K. For any substitution, verify the complete pin description, electrical limits, clock requirements, and package orientation in the Texas Instruments documentation. A different manufacturer's codec should be treated as a new design unless a documented pin-to-pin cross-reference proves compatibility.

השוואה עם חלופות

פרמטר מוצר זה PCM3001EG/2K PCM3001E PCM3001 PCM3001EG4 PCM3001E/2KG4
Package 28-pin SSOP (DB) 28-pin SSOP (DB) 28-pin SSOP (DB) 28-pin SSOP (DB) 28-pin SSOP (DB) 28-pin SSOP (DB)
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Product Type Stereo audio codec Stereo audio codec Stereo audio codec Stereo audio codec Stereo audio codec Stereo audio codec

מבדילים עיקריים

  • Matches the closest listed family option in all identified core conversion parameters (לעומתPCM3001EG/2K)
  • Provides the identified 2000-piece order configuration (לעומתPCM3001EG4)
  • Combines stereo capture and playback in one 28-pin package (לעומתPCM3001)

הערות תכנון

Separate analog and digital return paths and route the serial clock and data away from the single-ended input and output pins. Use the Texas Instruments PCM3001 datasheet land pattern and recommended component placement for the 28-pin SSOP. Decoupling capacitors should be positioned directly at the corresponding supply pins, with the analog section kept free of high-current digital return paths.

Treat the serial interface as a clocked digital subsystem with dedicated return routing. Confirm the supported master-clock relationship, sample rate, and serial format before connecting a processor or DSP. Avoid long parallel runs near the analog inputs, and use a continuous ground reference beneath the device so switching currents do not add voltage across the sensitive analog return path.

Do not assume that every PCM3001 family ordering code is interchangeable without checking the suffix-specific ordering table. PCM3001E/2K, PCM3001EG/2K, PCM3001E, PCM3001EG4, and PCM3001E/2KG4 share the 28-pin SSOP format, but reel configuration, order quantity, and qualification attributes can differ. Verify the pin assignment, electrical limits, supply requirements, and package orientation before approving a substitution.

מידע על תאימות

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The PCM3001E/2K is identified as RoHS compliant. No separate REACH, halogen-free, conflict-minerals, or automotive-qualification statement is established for this ordering code.

חיפושים קשורים

PCM3001E/2K datasheet PCM3001E/2K pinout PCM3001E/2K datasheet pdf PCM3001E/2K equivalent PCM3001E/2K replacement PCM3001E/2K cross reference PCM3001E/2K vs PCM3001EG/2K Texas Instruments PCM3001E/2K PCM3001E/2K SSOP-28 pinout PCM3001E/2K price PCM3001E/2K stock PCM3001E/2K application circuit PCM3001 18-bit stereo audio codec PCM3001E/2K hardware line output control

רכיבים ומונחים קשורים

Texas Instruments PCM3001E/2K PCM3001EG/2K PCM3001E PCM3001 PCM3001EG4 PCM3001E/2KG4 stereo audio codec audio codec audio interface IC analog-to-digital converter ADC digital-to-analog converter DAC sigma-delta converter single-ended analog input single-ended analog output serial audio interface 18-bit resolution two ADC channels two DAC channels hardware line-output control SSOP-28 surface mount RoHS
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר