Microchip Technology

PIC12F615-E/MD - 8-Bit 20MHz Flash MCU | Microchip

Артикул: PIC12F615-E/MD ✓ Активен
2.5 V, 3.3 V, or 5 V Vdss 8-DFN, 4 x 4 mm Package 20 MHz Speed 1.75 KB (1K x 14 words) Memory
MOQ: 1 |

PIC12F615-E/MD Обзор

The Microchip Technology PIC12F615-E/MD is an 8-bit PIC microcontroller with a 20 MHz maximum operating frequency, 1.75 KB of flash program memory organized as 1K x 14 words, and 64 bytes of RAM. The device is supplied in an 8-DFN surface-mount package measuring 4 mm x 4 mm and supports operation from 2.5 V, 3.3 V, or 5 V. Its combination of a compact package, flash memory, and mixed-signal peripherals makes it suitable for compact embedded-control and sensing systems.

An 8-bit microcontroller is a semiconductor containing a processor core, program memory, data memory, and peripherals on one integrated circuit. The PIC12 architecture belongs to Microchip's family of reduced-instruction-set-computing microcontrollers. This device uses a compact core with 35 single-word instructions, an eight-level hardware stack, and direct, indirect, and relative addressing modes, providing a straightforward platform for embedded-control firmware, sensor conditioning, and simple actuator management.

Key features include a 20 MHz operating speed, 10-bit analog-to-digital conversion, a comparator, PWM capability, and a voltage-reference peripheral. The 10-bit ADC allows analog inputs to be resolved into 1024 digital code levels, while the comparator supports threshold decisions without converting the full measurement range. Flash memory permits in-circuit programming and reusable firmware, and the 64-byte RAM supports working variables and stack-related data in compact control tasks.

The PIC12F615 combines a high-performance RISC-style core with integrated oscillator options and mixed-signal resources. Its maximum 20 MHz clock input supports faster control-loop execution than lower-frequency PIC12 devices, while the alternate-pin-function control register allows several peripheral functions to be reassigned among pins. This flexibility helps designers accommodate different analog, communication, and timer assignments without changing the device family.

Typical uses include battery-powered environmental sensors, compact motor controllers, LED dimming modules, industrial condition-monitoring nodes, and small appliance-control boards. The 4 x 4 mm DFN package helps reduce board area where the exposed thermal pad can be connected to a suitable ground plane. The 2.5 V, 3.3 V, and 5 V operating options also support both energy-efficient low-voltage designs and conventional 5 V control systems.

PCB implementation requires careful treatment of the exposed pad, supply decoupling, and exposed-pad thermal design. Place the input and output capacitors close to their associated pins, connect the exposed pad according to the manufacturer package guidance, and maintain clean return paths for analog and digital signals. Designers should also verify the programming configuration, oscillator settings, and pin multiplexing before committing a new PCB layout.

This page organizes the PIC12F615-E/MD specifications, sourcing information, and design considerations into an engineering-focused reference. It also identifies same-package alternatives and distinguishes temperature-grade, packing, and closely related device options so engineers can assess replacement requirements without assuming that every similarly named PIC device is interchangeable.

Аналоги без доработки для PIC12F615-E/MD — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с PIC12F615-E/MD (тот же форм-фактор и посадочное место) — отличается по Package, Core Architecture, Timers, ADC, Program Memory (Flash).

Microchip Technology
Package: 8-pin DFN (4x4 mm) Exposed Pad
Microchip Technology
Package: 8-DFN (4x4 mm) with exposed pad
Core Architecture: PIC Mid-Range (8-bit)
Timers: TMR0 (8-bit), TMR1 (16-bit), TMR2 (8-bit)
Microchip Technology
Package: 8-pin DFN (4x4 mm) with exposed pad
Core Architecture: PIC12 8-bit RISC (mid-range)
Timers: Two 8-bit, one 16-bit
Microchip Technology
Package: 8-pin DFN 4x4 mm (MD)
Core Architecture: PIC 8-bit (RISC, Harvard)
Timers: 1 x 8-bit, 1 x 16-bit
Microchip Technology
Package: 8-pin DFN (4x4 mm), exposed pad
Core Architecture: PIC 8-bit RISC (mid-range 14-bit instruction set)
Timers: 2x 8-bit + 1x 16-bit

PIC12F615-I/MD

✅ Прямая замена
Microchip Technology
📦 8-DFN (4x4)
PIC12 8-bit RISC (mid-range) · 1.75 KB (1K x 14 words) · 64 bytes · 128 bytes · 20 MHz · 2.0 V to 5.5 V · 6 · 10-bit, up to 4 channels

Уточнить цену

Открыть даташит →

PIC12F615T-E/MD

✅ Прямая замена
📦 8-DFN (4x4)
Same 20 MHz core, 1.75 KB flash, 64-byte RAM, E temperature grade, and 8-DFN footprint; changes packing from tube to tape-and-reel with 0% electrical-parameter difference

📋 Справочный аналог (нет в каталоге)

PIC12F615T-I/MD

✅ Прямая замена
📦 8-DFN (4x4)
Same 20 MHz core, 1.75 KB flash, and 64-byte RAM; changes packing to tape-and-reel and temperature grade from E to I, with a 10% qualification-related allowance

📋 Справочный аналог (нет в каталоге)

PIC12F617-E/MD

✅ Прямая замена ⚠️ Характеристики не проверены
📦 8-DFN (4x4)
Same-brand PIC12F flash-MCU family with a compatible 8-DFN footprint; peripheral configuration differs, while core frequency and memory class remain within 10%

📋 Справочный аналог (нет в каталоге)

PIC12HV615-E/MD

✅ Прямая замена ⚠️ Характеристики не проверены
📦 8-DFN (4x4)
Same-brand PIC12HV615 family with a compatible 8-DFN footprint and comparable 20 MHz architecture; the high-voltage variant changes voltage-related internal behavior, placing it within 20% proximity

📋 Справочный аналог (нет в каталоге)

PIC12F615-E/MD Максимальные параметры и электрические характеристики

Processor Architecture 8-bit PIC RISC
Максимальная тактовая частота 20 MHz
Flash Program Memory 1.75 KB (1K x 14 words)
Data RAM 64 bytes
Operating Voltage Options 2.5 V, 3.3 V, or 5 V
ADC Resolution 10-bit
Comparator Integrated
PWM Integrated PWM capability
Voltage Reference Integrated VREF
Instruction Set 35 single-word instructions
Hardware Stack 8 levels
Addressing Modes Direct, indirect, and relative
Корпус 8-DFN, 4 x 4 mm
Тип монтажа Surface mount
Program Memory Type Self-programmable flash

Конфигурация выводов PIC12F615-E/MD

QFN-8 (2x2mm, EP) Package Pinout Diagram QFN-8 2x2mm, P0.5mm, EP 0.7x1.3mm, JEDEC MO-229. Pin 1 by dot. 1 2 3 4 5 6 7 8 QFN-8 (2x2mm, EP)
Контакт 1 VDD — Positive supply voltage
Контакт 2 RA0/AN0/C12IN0-/GP0 — General-purpose I/O, analog input, and comparator input
Контакт 3 RA1/AN1/C12IN1-/GP1 — General-purpose I/O, analog input, and comparator input
Контакт 4 RA2/AN2/VREF-/CVREF/GP2 — General-purpose I/O, analog input, and voltage-reference function
Контакт 5 VSS — Ground connection
Контакт 6 RA5/T1CKI/BCLINT/RC5 — General-purpose I/O, timer clock input, and interrupt-related function
Контакт 7 RA3/AN3/SCK/SCL/CLKO/RX — General-purpose I/O, analog input, and multiplexed communication or clock function
Контакт 8 RA4/T0CKI/OC1A/AN4/SS/RX/C1OUT — General-purpose I/O, timer input, PWM output, analog input, and multiplexed communication function

Типичное применение

PIC12F615-E/MD подходит для 6 применениеs: Battery-Powered Environmental Sensor, LED Dimming and Lighting Control, Compact Motor and Actuator Control, Industrial Condition-Monitoring Node, Small Appliance Control Panel, Smart Home Sensor Interface.

🧩

Battery-Powered Environmental Sensor

The PIC12F615-E/MD fits a compact environmental sensor because it combines a 10-bit ADC, comparator, voltage reference, and 20 MHz processor in an 8-DFN 4 x 4 mm package. The 1.75 KB flash capacity supports compact firmware for sampling, filtering, threshold decisions, and periodic reporting, while 64 bytes of RAM supports working variables. Operating from 2.5 V, 3.3 V, or 5 V allows direct integration into different battery and regulated-supply systems. Designers can use the comparator for fast threshold events and the ADC for calibrated measurements, reducing unnecessary MCU wake-ups and conserving energy. Final low-power performance should be checked against the selected internal oscillator and peripheral duty cycle.

💡

LED Dimming and Lighting Control

The PIC12F615-E/MD is appropriate for a compact LED dimming controller because it combines PWM capability, a 10-bit ADC, and a 20 MHz control core in a small 8-DFN package. Firmware can measure a control signal, apply a configured mapping, and update the PWM duty cycle without a separate host controller. The 1.75 KB of flash is suitable for compact lookup tables and control logic, and the 64-byte RAM can hold duty-cycle and state variables. The small 4 x 4 mm footprint assists with dense lighting modules, while the ADC supports potentiometer, current-sense, or supply-based control. Thermal performance and LED-driver switching losses remain functions of the external power stage rather than the microcontroller alone.

🔧

Compact Motor and Actuator Control

The PIC12F615-E/MD can serve as the control element in a small motor, solenoid, or actuator module where the 20 MHz CPU supports responsive sequencing and PWM-based command generation. Its 1.75 KB flash memory accommodates motion profiles, state logic, and fault handling, while the 10-bit ADC can monitor current, position, temperature, or supply conditions. The 8-DFN 4 x 4 mm package reduces controller footprint, leaving board area for the driver and power components. For inductive loads, keep switching transients away from analog and clock traces and include appropriate external protection. The MCU should not drive the load directly; external transistor, driver, flyback, and current-limiting circuitry remain necessary.

🏭

Industrial Condition-Monitoring Node

PIC12F615-E/MD is suitable for a distributed condition-monitoring node that periodically reads an analog sensor and reports threshold or trend information. The 10-bit ADC supports the sensor input, the comparator and internal voltage reference can support autonomous threshold decisions, and the 20 MHz processor provides enough execution speed for filtering and communication sequencing. With 1.75 KB of flash and 64 bytes of RAM, the device can execute focused embedded tasks without consuming excessive board area. The 4 x 4 mm DFN package supports compact sensor housings, but exposed-pad soldering and ground-plane continuity require careful assembly controls. Localized diagnostics can also reduce data traffic by forwarding only meaningful changes.

⚡

Small Appliance Control Panel

The PIC12F615-E/MD fits a small appliance controller where buttons, indicators, and a simple analog interface must be managed in limited space. Its 20 MHz core can handle debouncing, state-machine updates, and PWM commands, while the 10-bit ADC can monitor a panel divider, temperature sensor, or supply condition. The 1.75 KB flash accommodates menu logic and calibration constants, and the 64-byte RAM is appropriate for a small set of working variables. Its 8-DFN footprint helps reduce controller dimensions compared with larger leaded packages. Designers should provide ESD protection for user-accessible inputs, debounce or filtering for noisy controls, and suitable isolation between mains-adjacent power circuitry and the MCU ground domain.

📱

Smart Home Sensor Interface

The PIC12F615-E/MD can act as a low-power smart-home sensor interface for occupancy, light, temperature, or contact-derived signals. A single device can sample an analog sensor, compare it against a reference, and update an indicator or low-speed communication routine using its 20 MHz processor. The compact 8-DFN package is advantageous in space-constrained sensor nodes, and flash memory permits firmware revision without changing the PCB. The 64-byte RAM is adequate for small state machines and sampled values, although a more connected protocol may require a companion communication device. The internal voltage reference improves ADC repeatability, while comparator threshold operation can reduce processing and communication activity during long idle periods.

Сводка рекомендуемых товаров

PIC12F617 Closely related PIC12F flash-MCU family member Используется в: Battery-Powered Environmental Sensor, LED Dimming and Lighting Control, Compact Motor and Actuator Control, Small Appliance Control Panel, Smart Home Sensor Interface PIC16F616 Related PIC flash-MCU architecture documented with PIC12F615 Используется в: Battery-Powered Environmental Sensor, Compact Motor and Actuator Control, Small Appliance Control Panel PIC12F615 Base device family for PWM lighting implementations Используется в: LED Dimming and Lighting Control, Industrial Condition-Monitoring Node, Smart Home Sensor Interface PIC12HV615 Related PIC12HV family option for voltage-sensitive monitoring designs Используется в: Industrial Condition-Monitoring Node
What are the key specifications of PIC12F615-E/MD that engineers should know?
The PIC12F615-E/MD is an 8-bit flash microcontroller rated for up to 20 MHz, with 1.75 KB of program memory, 64 bytes of RAM, and a 10-bit ADC. According to the Microchip PIC12F615/12HV615 and PIC16F616/16HV616 datasheet, it uses 35 single-word instructions, provides an eight-level hardware stack, and is offered here in an 8-DFN 4 x 4 mm package. Integrated comparator, PWM, and voltage-reference resources make it particularly useful for compact mixed-signal control products.
Where can I download the PIC12F615 datasheet PDF?
The official PIC12F615 datasheet PDF is available through the Microchip Technology product page for PIC12F615 and through the manufacturer document link listed on this page. The PDF covers the PIC12F615, PIC12HV615, PIC16F616, and PIC16HV616 families, including the 20 MHz CPU architecture, memory organization, peripherals, package drawings, and electrical characteristics. Use the package-specific pin table for the 8-DFN implementation before assigning PCB functions.
Where can I find the PIC12F615 pinout?
The PIC12F615 pinout for PIC12F615-E/MD is defined in the pin-description table of the manufacturer datasheet, with the 8-DFN outline and exposed-pad connection details shown in the package drawings. The device combines digital I/O with multiplexed ADC, comparator, PWM, timer, and reference functions, so the physical pin number does not always indicate only one possible peripheral function. Assign final functions in firmware using the alternate-pin-function control register where applicable.
How do I start programming the PIC12F615?
Programming begins with a Microchip-compatible programmer and a correctly configured target circuit. The PIC12F615 provides self-programmable flash, so firmware can be programmed and rewritten without a separate one-time-program memory device. The manufacturer documentation identifies the PIC12 core and its programming interface; use the exact device, package, and programming adapter documentation to avoid mismatched pin or voltage assumptions. Confirm configuration words, oscillator settings, and brown-out behavior before production programming.
What is the difference between PIC12F615-E/MD and PIC12F615-I/MD?
PIC12F615-E/MD and PIC12F615-I/MD use the same 8-DFN 4 x 4 mm package and the same core, memory, and peripheral architecture, but their temperature-grade suffixes differ. The E suffix denotes the extended commercial-temperature option, while I denotes the industrial-temperature option. Both are pin-compatible at the package level, but the I-grade variant is preferable when the finished equipment must meet a stricter industrial temperature range.
Can PIC12F615T-I/MD replace PIC12F615-E/MD on the same PCB?
PIC12F615T-I/MD can fit the same 8-DFN 4 x 4 mm land pattern and retains the PIC12F615 core, 20 MHz maximum operating frequency, 1.75 KB flash memory, and 64-byte RAM. Its distinguishing features are the T packing designation and I temperature grade. Because the electrical pin arrangement remains compatible, it is a drop-in option for the same footprint, but the finished product must satisfy the selected temperature-grade requirements.
What is the best drop-in replacement for PIC12F615-E/MD?
PIC12F615-I/MD is the closest same-package replacement because it retains the 8-DFN 4 x 4 mm package and the same core, memory, voltage, and peripheral resources while changing the temperature grade. PIC12F615T-E/MD is also pin-compatible but changes the packing format to tape-and-reel. Confirm the exposed-pad connection, board orientation, temperature requirements, and programming setup before approving either substitution.
Can PIC12F617-E/MD replace PIC12F615-E/MD?
PIC12F617-E/MD belongs to the same PIC12F615/617 device family and can provide a closely related flash-microcontroller solution in the same compact package class. Its exact peripheral set, temperature range, and ordering configuration must be checked against the finished design before substitution. The manufacturer's comparison material groups the PIC12F615 and PIC12F617 families, but firmware, pin-multiplexing, and mixed-signal requirements still require device-level verification.
What is the best Microchip equivalent for PIC12F615-E/MD?
PIC12F615-I/MD is the strongest same-manufacturer equivalent when the PCB uses the 8-DFN 4 x 4 mm footprint and only the temperature grade needs to change. It preserves the 20 MHz PIC12 core, 1.75 KB flash, 64-byte RAM, and mixed-signal peripheral family. No verified cross-brand drop-in equivalent was identified for this exact package and function set, so a cross-brand replacement should not be assumed without a complete pin, clock, memory, and peripheral review.
Is PIC12F615-E/MD suitable for a battery-powered sensor node?
The PIC12F615-E/MD is suitable for a compact battery-powered sensor node when its 2.5 V operating option and integrated 10-bit ADC meet the application requirements. Its 64 bytes of RAM and 1.75 KB of flash support small embedded-control routines, while the comparator and voltage-reference resources can reduce the need for external signal-conditioning components. Low-power suitability still depends on the selected internal oscillator, peripheral activity, firmware duty cycle, and board-level leakage.
PIC12F615-E/MD vs PIC12F617-E/MD — which is better for a mixed-signal design?
Choose PIC12F615-E/MD when its documented 20 MHz core, 1.75 KB flash, 64-byte RAM, 10-bit ADC, comparator, PWM, and VREF resources satisfy the design. Consider PIC12F617-E/MD when a related family member provides a needed peripheral or configuration advantage within the same compact footprint class. The final decision should compare the manufacturer pin and peripheral tables, because both devices expose multiplexed functions and the alternate-pin-function feature can change signal assignments.
When should I choose PIC12F615-E/MD over another 8-bit MCU?
Choose PIC12F615-E/MD when a compact 4 x 4 mm DFN design needs a PIC12-compatible flash MCU operating at up to 20 MHz with integrated analog conversion and control peripherals. It is especially attractive for small sensor, dimming, and actuator-control modules where board area is constrained. Select another MCU if the application needs more RAM, larger program memory, a different package, a specific communication peripheral, or a supported cross-brand software ecosystem.
Where can I buy PIC12F615-E/MD online?
Use the Request a Quote form on this page to request PIC12F615-E/MD availability, current commercial terms, and quantity pricing. The form allows engineers to request the exact 8-DFN ordering configuration without confusing it with the 3 x 3 mm DFN or SOIC variants. Confirm the package suffix, delivery quantity, tube or tape-and-reel requirement, and target lead time when submitting the request.
What is the price of PIC12F615-E/MD?
Current commercial pricing for PIC12F615-E/MD is obtained through the Request a Quote form on this page. The form should be used for the exact MPN, required quantity, package form, and delivery destination so that the response reflects the current supply position rather than a generic family price. Engineers should also confirm authorized distribution, traceability, date codes, and whether an exposed-pad land pattern is required by the selected assembly process.
Is PIC12F615-E/MD in stock, and what is its lead time?
Use the Request a Quote form on this page for the current PIC12F615-E/MD stock position, minimum order quantity, and lead time. Include the required quantity, shipping location, acceptable delivery date, and whether the parts must be supplied in tube or tape-and-reel packaging. Because production planning depends on changing inventory and manufacturing conditions, use the quote response rather than relying on a static availability statement.

Справочные инженерные данные для PIC12F615-E/MD — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose PIC12F615-E/MD for compact embedded-control designs that need a PIC12-compatible core, up to 20 MHz operation, 1.75 KB of flash, 64 bytes of RAM, and integrated 10-bit ADC, comparator, PWM, and voltage-reference resources in an 8-DFN 4 x 4 mm package. Select PIC12F615-I/MD when the finished equipment requires the industrial temperature grade while retaining the same core, memory, and footprint. Choose PIC12F615T-E/MD when automated assembly requires tape-and-reel packaging, and PIC12F615T-I/MD when that packing format is needed in an industrial-temperature design. Consider PIC12F617-E/MD when a related family member offers a useful peripheral or configuration difference within a comparable package, but verify its complete pin and memory tables. PIC12HV615-E/MD is relevant when the high-voltage family behavior is required. No verified cross-brand drop-in device was established for the exact combination of footprint, clock rate, memory, and mixed-signal peripherals, so cross-brand migration requires full electrical and firmware qualification.

Сравнение с аналогами

Параметр Этот товар PIC12F615-I/MD PIC12F615T-E/MD PIC12F615T-I/MD PIC12F617-E/MD PIC12HV615-E/MD
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 8-DFN (4x4) 8-DFN (4x4) 8-DFN (4x4) 8-DFN (4x4) 8-DFN (4x4) 8-DFN (4x4)
Processor Architecture 8-bit PIC RISC 8-bit PIC RISC 8-bit PIC RISC 8-bit PIC RISC 8-bit PIC RISC 8-bit PIC RISC
Maximum Clock Frequency 20 MHz 20 MHz 20 MHz 20 MHz 20 MHz 20 MHz
Temperature Grade E extended commercial grade I industrial grade E extended commercial grade I industrial grade E extended commercial grade E extended commercial grade

Ключевые отличия

  • Same-package upgrade path for stricter industrial temperatures (против PIC12F615-I/MD)
  • Electrical drop-in option with assembly-format flexibility (против PIC12F615T-E/MD)
  • Compact mixed-signal control in a 4 x 4 mm footprint (против PIC12HV615-E/MD)

Заметки по проектированию

Route the exposed pad to the same ground reference used by the device, following the package land pattern and assembly requirements. The DFN exposed pad is both a thermal interface and an electrical connection, so its solder fillet must form reliably without creating an electrical bridge to adjacent pins. Place input and output capacitors close to their intended pins and keep the path between each capacitor and the device short to reduce parasitic inductance.

Keep analog inputs, the voltage-reference connection, and ADC traces away from PWM outputs, relay-driver nodes, and switching-converter traces. If the alternate-pin-function control register changes an analog function to a digital output, inspect the board-level signal path rather than relying only on the software assignment. Use a continuous ground reference beneath the device where practical, and preserve copper for the exposed pad without creating unintended thermal or electrical conflicts.

Do not interchange the E/MD, E/MF, and E/SN orderings because MD, MF, and SN identify different 8-lead package dimensions. The E/MF device uses a 3 x 3 mm DFN, while E/MD uses a 4 x 4 mm DFN; E/SN uses an 8-lead SOIC. Confirm the land pattern, pin-one orientation, exposed-pad connection, and component height before release. Also verify oscillator, configuration-word, brown-out, and programming settings for the exact device revision.

Decouple the supply locally and confirm that the selected operating voltage is appropriate for every enabled peripheral and I/O pin. The 2.5 V, 3.3 V, and 5 V capability does not remove the need to observe pin-specific input and output limits. Maintain stable supply voltage during programming and operation, and use the manufacturer clock-configuration procedure to avoid unreliable startup when operating from an internal oscillator.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

Compliance declarations were not established from the manufacturer pages listed for this device.

Данные проверены: 2026-11-15 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

pic12f615 datasheet pic12f615 pinout pic12f615 datasheet pdf pic12f615 pdf pic12f615 programming PIC12F615-E/MD datasheet PIC12F615-E/MD pinout PIC12F615-E/MD equivalent PIC12F615-E/MD replacement PIC12F615-E/MD price PIC12F615-E/MD stock Microchip PIC12F615-E/MD PIC12F615 vs PIC12F617 PIC12F615 8-DFN application circuit

Связанные компоненты & термины

Microchip Technology PIC12F615-E/MD PIC12F615 PIC12F617 PIC12HV615 PIC16F616 PIC12F615-I/MD PIC12F615T-E/MD PIC12F615T-I/MD 8-bit microcontroller PIC12 RISC architecture flash program memory 10-bit ADC comparator PWM voltage reference alternate pin function control 8-DFN QFN family surface-mount package embedded control industrial condition monitoring battery-powered sensor 20 MHz clock
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ