PIC12F615-E/MD - 8-Bit 20MHz Flash MCU | Microchip
MPN: PIC12F615-E/MD ✓ NakahandaPIC12F615-E/MD Ulas
An 8-bit microcontroller is a semiconductor containing a processor core, program memory, data memory, and peripherals on one integrated circuit. The PIC12 architecture belongs to Microchip's family of reduced-instruction-set-computing microcontrollers. This device uses a compact core with 35 single-word instructions, an eight-level hardware stack, and direct, indirect, and relative addressing modes, providing a straightforward platform for embedded-control firmware, sensor conditioning, and simple actuator management.
Key features include a 20 MHz operating speed, 10-bit analog-to-digital conversion, a comparator, PWM capability, and a voltage-reference peripheral. The 10-bit ADC allows analog inputs to be resolved into 1024 digital code levels, while the comparator supports threshold decisions without converting the full measurement range. Flash memory permits in-circuit programming and reusable firmware, and the 64-byte RAM supports working variables and stack-related data in compact control tasks.
The PIC12F615 combines a high-performance RISC-style core with integrated oscillator options and mixed-signal resources. Its maximum 20 MHz clock input supports faster control-loop execution than lower-frequency PIC12 devices, while the alternate-pin-function control register allows several peripheral functions to be reassigned among pins. This flexibility helps designers accommodate different analog, communication, and timer assignments without changing the device family.
Typical uses include battery-powered environmental sensors, compact motor controllers, LED dimming modules, industrial condition-monitoring nodes, and small appliance-control boards. The 4 x 4 mm DFN package helps reduce board area where the exposed thermal pad can be connected to a suitable ground plane. The 2.5 V, 3.3 V, and 5 V operating options also support both energy-efficient low-voltage designs and conventional 5 V control systems.
PCB implementation requires careful treatment of the exposed pad, supply decoupling, and exposed-pad thermal design. Place the input and output capacitors close to their associated pins, connect the exposed pad according to the manufacturer package guidance, and maintain clean return paths for analog and digital signals. Designers should also verify the programming configuration, oscillator settings, and pin multiplexing before committing a new PCB layout.
This page organizes the PIC12F615-E/MD specifications, sourcing information, and design considerations into an engineering-focused reference. It also identifies same-package alternatives and distinguishes temperature-grade, packing, and closely related device options so engineers can assess replacement requirements without assuming that every similarly named PIC device is interchangeable.
Mga alternatibo na pwedeng ilagay na PIC12F615-E/MD — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok PIC12F615-E/MD (parehas na form factor at footprint) — pagkakaiba sa Package, Core Architecture, Timers, ADC, Program Memory (Flash).
PIC12F615-I/MD
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →PIC12F615T-E/MD
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
PIC12F615T-I/MD
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
PIC12F617-E/MD
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
PIC12HV615-E/MD
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
PIC12F615-E/MD Mga Pinakamataas na Rating at Electrical Characteristics
| Processor Architecture | 8-bit PIC RISC |
| Maksimum na Taktiko ng Oras | 20 MHz |
| Flash Program Memory | 1.75 KB (1K x 14 words) |
| Data RAM | 64 bytes |
| Operating Voltage Options | 2.5 V, 3.3 V, or 5 V |
| ADC Resolution | 10-bit |
| Comparator | Integrated |
| PWM | Integrated PWM capability |
| Voltage Reference | Integrated VREF |
| Instruction Set | 35 single-word instructions |
| Hardware Stack | 8 levels |
| Addressing Modes | Direct, indirect, and relative |
| Packhaging | 8-DFN, 4 x 4 mm |
| Uri ng Pagpapasok | Surface mount |
| Program Memory Type | Self-programmable flash |
Pin Configuration ng PIC12F615-E/MD
| Pin 1 | VDD — Positive supply voltage |
| Pin 2 | RA0/AN0/C12IN0-/GP0 — General-purpose I/O, analog input, and comparator input |
| Pin 3 | RA1/AN1/C12IN1-/GP1 — General-purpose I/O, analog input, and comparator input |
| Pin 4 | RA2/AN2/VREF-/CVREF/GP2 — General-purpose I/O, analog input, and voltage-reference function |
| Pin 5 | VSS — Ground connection |
| Pin 6 | RA5/T1CKI/BCLINT/RC5 — General-purpose I/O, timer clock input, and interrupt-related function |
| Pin 7 | RA3/AN3/SCK/SCL/CLKO/RX — General-purpose I/O, analog input, and multiplexed communication or clock function |
| Pin 8 | RA4/T0CKI/OC1A/AN4/SS/RX/C1OUT — General-purpose I/O, timer input, PWM output, analog input, and multiplexed communication function |
Tipikal na mga Gamit
PIC12F615-E/MD ay nararapat para sa 6 aplikasyons: Battery-Powered Environmental Sensor, LED Dimming and Lighting Control, Compact Motor and Actuator Control, Industrial Condition-Monitoring Node, Small Appliance Control Panel, Smart Home Sensor Interface.
Battery-Powered Environmental Sensor
The PIC12F615-E/MD fits a compact environmental sensor because it combines a 10-bit ADC, comparator, voltage reference, and 20 MHz processor in an 8-DFN 4 x 4 mm package. The 1.75 KB flash capacity supports compact firmware for sampling, filtering, threshold decisions, and periodic reporting, while 64 bytes of RAM supports working variables. Operating from 2.5 V, 3.3 V, or 5 V allows direct integration into different battery and regulated-supply systems. Designers can use the comparator for fast threshold events and the ADC for calibrated measurements, reducing unnecessary MCU wake-ups and conserving energy. Final low-power performance should be checked against the selected internal oscillator and peripheral duty cycle.
Inirekomenda
LED Dimming and Lighting Control
The PIC12F615-E/MD is appropriate for a compact LED dimming controller because it combines PWM capability, a 10-bit ADC, and a 20 MHz control core in a small 8-DFN package. Firmware can measure a control signal, apply a configured mapping, and update the PWM duty cycle without a separate host controller. The 1.75 KB of flash is suitable for compact lookup tables and control logic, and the 64-byte RAM can hold duty-cycle and state variables. The small 4 x 4 mm footprint assists with dense lighting modules, while the ADC supports potentiometer, current-sense, or supply-based control. Thermal performance and LED-driver switching losses remain functions of the external power stage rather than the microcontroller alone.
Inirekomenda
Compact Motor and Actuator Control
The PIC12F615-E/MD can serve as the control element in a small motor, solenoid, or actuator module where the 20 MHz CPU supports responsive sequencing and PWM-based command generation. Its 1.75 KB flash memory accommodates motion profiles, state logic, and fault handling, while the 10-bit ADC can monitor current, position, temperature, or supply conditions. The 8-DFN 4 x 4 mm package reduces controller footprint, leaving board area for the driver and power components. For inductive loads, keep switching transients away from analog and clock traces and include appropriate external protection. The MCU should not drive the load directly; external transistor, driver, flyback, and current-limiting circuitry remain necessary.
Inirekomenda
Industrial Condition-Monitoring Node
PIC12F615-E/MD is suitable for a distributed condition-monitoring node that periodically reads an analog sensor and reports threshold or trend information. The 10-bit ADC supports the sensor input, the comparator and internal voltage reference can support autonomous threshold decisions, and the 20 MHz processor provides enough execution speed for filtering and communication sequencing. With 1.75 KB of flash and 64 bytes of RAM, the device can execute focused embedded tasks without consuming excessive board area. The 4 x 4 mm DFN package supports compact sensor housings, but exposed-pad soldering and ground-plane continuity require careful assembly controls. Localized diagnostics can also reduce data traffic by forwarding only meaningful changes.
Inirekomenda
Small Appliance Control Panel
The PIC12F615-E/MD fits a small appliance controller where buttons, indicators, and a simple analog interface must be managed in limited space. Its 20 MHz core can handle debouncing, state-machine updates, and PWM commands, while the 10-bit ADC can monitor a panel divider, temperature sensor, or supply condition. The 1.75 KB flash accommodates menu logic and calibration constants, and the 64-byte RAM is appropriate for a small set of working variables. Its 8-DFN footprint helps reduce controller dimensions compared with larger leaded packages. Designers should provide ESD protection for user-accessible inputs, debounce or filtering for noisy controls, and suitable isolation between mains-adjacent power circuitry and the MCU ground domain.
Inirekomenda
Smart Home Sensor Interface
The PIC12F615-E/MD can act as a low-power smart-home sensor interface for occupancy, light, temperature, or contact-derived signals. A single device can sample an analog sensor, compare it against a reference, and update an indicator or low-speed communication routine using its 20 MHz processor. The compact 8-DFN package is advantageous in space-constrained sensor nodes, and flash memory permits firmware revision without changing the PCB. The 64-byte RAM is adequate for small state machines and sampled values, although a more connected protocol may require a companion communication device. The internal voltage reference improves ADC repeatability, while comparator threshold operation can reduce processing and communication activity during long idle periods.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for PIC12F615-E/MD — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | PIC12F615-I/MD | PIC12F615T-E/MD | PIC12F615T-I/MD | PIC12F617-E/MD | PIC12HV615-E/MD |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 8-DFN (4x4) | 8-DFN (4x4) | 8-DFN (4x4) | 8-DFN (4x4) | 8-DFN (4x4) | 8-DFN (4x4) |
| Processor Architecture | 8-bit PIC RISC | 8-bit PIC RISC | 8-bit PIC RISC | 8-bit PIC RISC | 8-bit PIC RISC | 8-bit PIC RISC |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Temperature Grade | E extended commercial grade | I industrial grade | E extended commercial grade | I industrial grade | E extended commercial grade | E extended commercial grade |
Pangunahing mga Pagkakaiba
- Same-package upgrade path for stricter industrial temperatures (kumpara saPIC12F615-I/MD)
- Electrical drop-in option with assembly-format flexibility (kumpara saPIC12F615T-E/MD)
- Compact mixed-signal control in a 4 x 4 mm footprint (kumpara saPIC12HV615-E/MD)
Talaan ng Disenyo
Route the exposed pad to the same ground reference used by the device, following the package land pattern and assembly requirements. The DFN exposed pad is both a thermal interface and an electrical connection, so its solder fillet must form reliably without creating an electrical bridge to adjacent pins. Place input and output capacitors close to their intended pins and keep the path between each capacitor and the device short to reduce parasitic inductance.
Keep analog inputs, the voltage-reference connection, and ADC traces away from PWM outputs, relay-driver nodes, and switching-converter traces. If the alternate-pin-function control register changes an analog function to a digital output, inspect the board-level signal path rather than relying only on the software assignment. Use a continuous ground reference beneath the device where practical, and preserve copper for the exposed pad without creating unintended thermal or electrical conflicts.
Do not interchange the E/MD, E/MF, and E/SN orderings because MD, MF, and SN identify different 8-lead package dimensions. The E/MF device uses a 3 x 3 mm DFN, while E/MD uses a 4 x 4 mm DFN; E/SN uses an 8-lead SOIC. Confirm the land pattern, pin-one orientation, exposed-pad connection, and component height before release. Also verify oscillator, configuration-word, brown-out, and programming settings for the exact device revision.
Decouple the supply locally and confirm that the selected operating voltage is appropriate for every enabled peripheral and I/O pin. The 2.5 V, 3.3 V, and 5 V capability does not remove the need to observe pin-specific input and output limits. Maintain stable supply voltage during programming and operation, and use the manufacturer clock-configuration procedure to avoid unreliable startup when operating from an internal oscillator.
Impormasyon ng Pagsunod sa Kautusan
Compliance declarations were not established from the manufacturer pages listed for this device.