PIC16C73A-10/SO - 8-Bit OTP MCU 7KB 22 I/O SOIC-28 | Microchip
Артикул: PIC16C73A-10/SO ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $6.5962 | $6,60 |
| 10 | $6.1 | $61,00 |
| 100 | $5.59 | $559,00 |
| 500 | $5.05 | $2.525,00 |
| 1.000 | $4.5 | $4.500,00 |
PIC16C73A-10/SO Обзор
An 8-bit microcontroller is a single-chip computer built around an 8-bit data path, optimized for control-oriented tasks in embedded systems. Within the broader taxonomy, the PIC16C73A belongs to the mid-range PIC16 family (8-bit MCU -> microcontroller -> MCU -> embedded processor -> semiconductor). It sits between low-pin PIC10/12 devices and high-performance PIC18 parts, balancing code density, peripheral integration, and cost. CMOS process technology delivers the low standby current (under 1 uA typical at 3V/32 kHz) that defines Microchip's nanoWatt-class PIC legacy.
Key features include the Harvard RISC architecture with only 35 single-word instructions, 14-bit wide instruction word, 8-bit data path, and 25 mA source/sink current on digital I/O capable of directly driving LEDs and small relays. The integrated ADC and capture/compare/PWM modules enable motor-control, sensor-conditioning, and lighting applications without external analog ICs. The OTP memory allows one-time field programming, lowering unit cost versus windowed or flash versions.
Typical applications span industrial control panels, automotive body electronics, appliance control boards, sensor signal conditioning, and low-cost consumer devices where integrated ADC simplifies BOM. The wide commercial/industrial/extended temperature range supports harsh-environment deployments. Designers migrating from PIC16C73A are advised to evaluate PIC16C73B (drop-in successor) or PIC16F73 (flash-based alternative) per Microchip's official guidance.
When designing with this part, ensure oscillator stability at 10 MHz with appropriate load capacitors, and observe the maximum source/sink current per pin (25 mA) and per-port aggregate limits specified in the manufacturer datasheet. Brown-out and watchdog features are not integrated on this OTP revision; external supervisory ICs may be required for safety-critical applications.
This page synthesizes real-time distributor pricing (LCSC, DigiKey, Heisener, Octopart), Microchip-recommended drop-in alternatives (PIC16C73B, PIC16F73), and engineering-oriented design notes not collated on any single datasheet or distributor page.
Аналоги без доработки для PIC16C73A-10/SO — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC16C73A-10/SO (тот же форм-фактор и посадочное место) — отличается по Package, ADC, Program Memory Type, Timers, Program Memory Size.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC16C73B-04I/SO
✅ Прямая замена✓ В наличии
$7.1 / шт.
Открыть даташит →PIC16C73B-10I/SO
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC16C73B-20I/SO
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC16F73-I/SO
✅ Прямая замена✓ В наличии
$2.45 / шт.
Открыть даташит →PIC16C73A-10I/SO
✅ Прямая замена✓ В наличии
$3.55 / шт.
Открыть даташит →PIC16C73AT-10/SO
✅ Прямая замена✓ В наличии
$2.4 / шт.
Открыть даташит →PIC16C73A-10/SO Максимальные параметры и электрические характеристики
| Core Architecture | 8-bit PIC16C mid-range RISC |
| Instruction Set Width | 14-bit |
| Program Memory Type | OTP (One-Time Programmable) EPROM |
| Program Memory Size | 7 KB (4K x 14) |
| Data RAM | 192 bytes |
| Maximum CPU Clock | 10 MHz (-10 speed grade) |
| Instruction Cycle Time | 400 ns at 10 MHz |
| Supply Voltage (VDD) | 4.0 V to 5.5 V |
| Number of I/O Pins | 22 |
| ADC | 8-bit, 5 channels |
| I/O Source/Sink Current | 25 mA / 25 mA per pin |
| Timers | 3 (Timer0, Timer1, Timer2) |
| CCP Modules | 2 (Capture/Compare/PWM) |
| Корпус | 28-pin SOIC (SO) |
| Диапазон рабочих температур | -40C to +85C (industrial, inferred) |
| Standby Current | 1 uA typical at 3V/32 kHz |
| Статус RoHS | Compliant |
Конфигурация выводов PIC16C73A-10/SO
| Контакт 1 | MCLR/VPP — Master Clear (Reset) input or programming voltage |
| Контакт 2 | RA0/AN0 — PORTA bit 0 / Analog input channel 0 |
| Контакт 3 | RA1/AN1 — PORTA bit 1 / Analog input channel 1 |
| Контакт 4 | RA2/AN2 — PORTA bit 2 / Analog input channel 2 |
| Контакт 5 | RA3/AN3/VREF+ — PORTA bit 3 / Analog input channel 3 / ADC positive reference |
| Контакт 6 | RA4/T0CKI — PORTA bit 4 / Timer0 clock input |
| Контакт 7 | RA5/SS/AN4 — PORTA bit 5 / SPI slave select / Analog input channel 4 |
| Контакт 8 | RE0/RD/AN5 — PORTE bit 0 / Read control for parallel slave port / Analog input channel 5 |
| Контакт 9 | RE1/WR/AN6 — PORTE bit 1 / Write control for parallel slave port / Analog input channel 6 |
| Контакт 10 | RE2/CS/AN7 — PORTE bit 2 / Chip select for parallel slave port / Analog input channel 7 |
| Контакт 11 | VDD — Positive supply voltage (4.0V to 5.5V) |
| Контакт 12 | VSS — Ground reference |
| Контакт 13 | OSC1/CLKIN — Oscillator crystal input / external clock input |
| Контакт 14 | OSC2/CLKOUT — Oscillator crystal output / clock output (Fosc/4) |
| Контакт 15 | RC0/T1OSO/T1CKI — PORTC bit 0 / Timer1 oscillator output / Timer1 clock input |
| Контакт 16 | RC1/T1OSI/CCP2 — PORTC bit 1 / Timer1 oscillator input / CCP2 module |
| Контакт 17 | RC2/CCP1 — PORTC bit 2 / CCP1 module |
| Контакт 18 | RC3/SCK/SCL — PORTC bit 3 / SPI clock / I2C clock |
| Контакт 19 | RD0/PSP0 — PORTD bit 0 / Parallel slave port bit 0 |
| Контакт 20 | RD1/PSP1 — PORTD bit 1 / Parallel slave port bit 1 |
| Контакт 21 | RD2/PSP2 — PORTD bit 2 / Parallel slave port bit 2 |
| Контакт 22 | RD3/PSP3 — PORTD bit 3 / Parallel slave port bit 3 |
| Контакт 23 | RC4/SDI/SDA — PORTC bit 4 / SPI data in / I2C data |
| Контакт 24 | RC5/SDO — PORTC bit 5 / SPI data out |
| Контакт 25 | RC6/TX/CK — PORTC bit 6 / USART asynchronous transmit / synchronous clock |
| Контакт 26 | RC7/RX/DT — PORTC bit 7 / USART asynchronous receive / synchronous data |
| Контакт 27 | RD4/PSP4 — PORTD bit 4 / Parallel slave port bit 4 |
| Контакт 28 | RD5/PSP5 — PORTD bit 5 / Parallel slave port bit 5 |
Типичное применение
PIC16C73A-10/SO подходит для 6 применениеs: Industrial Sensor Conditioning and Control, Appliance Control Boards, Automotive Body Electronics, Consumer Electronics Remote Controls, Security and Access Control Panels, LED Lighting and Signage Controllers.
Industrial Sensor Conditioning and Control
The PIC16C73A-10/SO fits industrial sensor conditioning boards because its integrated 5-channel 8-bit ADC digitizes thermocouple, RTD bridge, or pressure-sensor signals without an external ADC IC. Its 192-byte RAM and 7 KB OTP program memory accommodate linearization lookup tables and PID control loops for closed-loop valve or heater actuation. The 22 high-current (25 mA sink/source) I/O lines drive relays, optocouplers, and indicator LEDs directly. The 4.0-5.5V supply aligns with 5V industrial backplanes, and the 28-SOIC footprint supports reflow assembly on mixed-signal PLC daughter cards.
Рекомендуется
Appliance Control Boards
Washing machines, dishwashers, microwave ovens, and HVAC control boards commonly use the PIC16C73A-10/SO because its 22 I/O lines interface with keypad matrices, seven-segment or LCD displays, buzzer drivers, and triac-gate optocouplers. The two CCP (Capture/Compare/PWM) modules generate the precise timing signals needed for motor-speed control and zero-cross triac firing. OTP memory locks down mature firmware to prevent accidental overwrites in field-deployed appliances, lowering per-unit cost compared to flash parts.
Рекомендуется
Automotive Body Electronics
Body-control modules for window lifters, mirror adjusters, seat controllers, and interior lighting benefit from the PIC16C73A-10/SO's 25 mA I/O drive and integrated 8-bit ADC for switch-debounce and current-sense channels. The industrial temperature grade supports under-dash thermal environments. The 10 MHz CPU speed handles CAN-style software bit-banging or LIN-bus slave protocols for legacy vehicle networks, while the 28-SOIC package fits compact PCBAs inside door modules.
Рекомендуется
Consumer Electronics Remote Controls
Low-cost remote controls, IR learning devices, and toy controllers leverage the PIC16C73A-10/SO's sub-1 uA standby current at 3V/32 kHz, enabling coin-cell battery life of multiple years. The CCP module generates accurate IR carrier frequencies (36/38/40 kHz) for TV/AV remote protocols. Although the part's 4.0-5.5V VDD is higher than typical 3V remote designs, the PIC16F73 2-5.5V variant serves as a flash-equivalent pin-compatible drop-in for new portable designs.
Рекомендуется
Security and Access Control Panels
Keypad-based access control panels, alarm-system keypads, and PIN-entry modules use the PIC16C73A-10/SO's 22 I/O to scan 4x4 matrices, drive piezo buzzers, and switch relay outputs for door strikes. The integrated 8-bit ADC reads battery voltage for low-battery alerts and senses tamper-switch analog signatures. The OTP memory secures firmware against unauthorized code extraction, a key requirement in security applications. PIC16C73B is recommended for new designs.
Рекомендуется
LED Lighting and Signage Controllers
Architectural lighting fixtures, RGB color-mixing drivers, and electronic-signage controllers use the PIC16C73A-10/SO's two CCP modules to generate multi-channel PWM at kHz-range switching frequencies, dimming high-brightness LED strings with 8-bit resolution. The 22 I/O drive MOSFET gate drivers directly via 25 mA source current. The 4.0-5.5V supply aligns with constant-current LED-driver ICs (like LM3409 or TLC5940) on the same PCB, simplifying power-tree design.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC16C73A-10/SO — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC16C73B-04I/SO | PIC16C73B-10I/SO | PIC16F73-I/SO | PIC16C73A-10I/SO |
|---|---|---|---|---|---|
| Package | 28-SOIC | 28-SOIC - same | 28-SOIC - same | 28-SOIC - same | 28-SOIC - same |
| Brand | Microchip Technology | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same |
| Program Memory Type | OTP EPROM | OTP EPROM | OTP EPROM | Flash | OTP EPROM |
| Program Memory Size | 7 KB (4K x 14) | 7 KB (4K x 14) | 7 KB (4K x 14) | 7 KB (4K x 14) | 7 KB (4K x 14) |
| Maximum CPU Clock | 10 MHz | 4 MHz | 10 MHz | 20 MHz | 10 MHz |
| Data RAM | 192 bytes | 192 bytes | 192 bytes | 192 bytes | 192 bytes |
| I/O Pins | 22 | 22 | 22 | 22 | 22 |
| ADC | 8-bit, 5 ch | 8-bit, 5 ch | 8-bit, 5 ch | 8-bit, 5 ch | 8-bit, 5 ch |
| In-Circuit Programming | No (OTP only) | No (OTP only) | No (OTP only) | Yes (ICSP) | No (OTP only) |
| Recommended Status | Migration advised | Active successor (recommended) | Active successor (recommended) | Active flash alternative (recommended) | Legacy variant |
Ключевые отличия
- Microchip-official successor with drop-in compatibility (против PIC16C73B-04I/SO)
- Flash-based reprogrammability in same package (против PIC16F73-I/SO)
- Higher speed grade available in same package (против PIC16C73B-20I/SO)
Заметки по проектированию
The PIC16C73A-10/SO operates from a single 4.0V to 5.5V supply on pin 11 (VDD), with pin 12 as VSS. Place a 0.1 uF decoupling capacitor within 5 mm of VDD, plus a bulk 10 uF tantalum or aluminum electrolytic capacitor on the same rail as the digital supply. The EPROM-based process exhibits higher current transients than CMOS flash parts, so the bulk capacitor suppresses voltage dips when the ADC reference or I/O switching triggers simultaneous logic transitions. Estimated: total active current at 10 MHz / 5V is typically 5-15 mA depending on I/O loading (from PIC16C7X family datasheet).
Because the PIC16C73A-10/SO is OTP EPROM, firmware cannot be erased or rewritten after the initial programming event. Plan accordingly: validate code on a PIC16F73-I/SO flash equivalent before committing to OTP, and order OTP units only after firmware is final-locked. Migrating to PIC16C73B or PIC16F73 is recommended for new designs per Microchip's official product page statement that PIC16C73A is superseded. Also note that brown-out reset, watchdog timer, and internal oscillator options are NOT present on the A revision - design for external supervisor if required.
Place the 28-SOIC package on a 0.300-inch wide SOIC land pattern (per JEDEC MS-013) with thermal relief spokes on the ground plane. Route the oscillator traces (OSC1/OSC2) symmetrically and as short as possible, with a grounded guard ring if the design is mixed-signal to prevent 10 MHz clock harmonics from coupling into the analog AN0-AN4 ADC inputs. Keep MCLR/VPP (pin 1) trace short to avoid spurious resets from capacitive coupling, and route the analog VREF+/AN3 pin (pin 5) with a separate analog ground return to the ADC.
The 28-SOIC package has a thermal resistance (theta_JA) of approximately 80 C/W in still air and 60 C/W with 100 LFM airflow. Estimated: at typical 5V / 10 MHz operation with 10 mA active current, internal dissipation is 50 mW, yielding a 4 C junction-temperature rise - well within the 150 C absolute maximum. No heatsink is required under normal conditions; however, industrial designs near the -40 to +85 C operating envelope should validate thermal performance during EMC and burn-in testing.
Информация о соответствии
RoHS compliant per DigiKey product listing. AEC-Q100 not applicable - this is an industrial/consumer MCU not specifically qualified for automotive safety. The Microchip product page recommends migrating to PIC16C73B or PIC16F73.
