Microchip Technology

PIC16F527-I/JP 8-Bit 20MHz 1.5KB Flash MCU | Microchip

Артикул: PIC16F527-I/JP ✓ Активен
20-UQFN, 3x3 mm Package 20 MHz Speed 1.5 KB Flash, organized as 1K x 12 Memory
MOQ: 1 |

PIC16F527-I/JP Обзор

The Microchip Technology PIC16F527-I/JP is an 8-bit PIC microcontroller with a 20 MHz operating speed, 1.5 KB of Flash program memory, 64 bytes of data memory, an 8-bit ADC, two operational amplifiers, and two comparators, packaged in a 20-UQFN 3x3 mm package. It combines general-purpose microcontroller control with integrated analog functions for compact, cost-sensitive embedded designs.

PIC microcontrollers are 8-bit microcontrollers intended for control-oriented applications where a small instruction set, integrated peripherals, and economical packaging can simplify product development. The PIC16F527 combines the PIC16 MCU family with an ADC, dual op amps, and comparators, allowing a design to monitor and control analog signals without requiring separate analog ICs for every function.

Key features include 20 MHz operation, 1.5 KB of Flash memory, 64 bytes of data memory, and an 8-bit ADC. The integrated dual operational amplifiers and two comparators are useful for sensor conditioning, threshold detection, and local signal processing. The -40°C to +85°C temperature range supports industrial and commercial temperature environments.

The device is programmed through the PIC16F527 programming interface and uses Flash memory for in-system or production programming. The 20-UQFN package provides a small PCB footprint, while the exposed-pad configuration requires appropriate PCB thermal and assembly design. The device family also supports hardware interrupts, watchdog timing, and brown-out reset functions for more reliable autonomous operation.

Typical applications include compact industrial controllers, sensor interfaces, low-cost measurement instruments, consumer control products, and embedded analog monitoring systems. It is particularly suitable when an 8-bit MCU can handle the application logic while its integrated ADC, op amps, and comparators reduce the number of external components.

When designing a board, follow the Microchip datasheet for the exact 20-UQFN land pattern, exposed-pad connection, recommended decoupling, programming-test points, and pin multiplexing. Confirm the required operating voltage and peripheral assignments in the device-specific pin table before finalizing the PCB and firmware.

Аналоги без доработки для PIC16F527-I/JP — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с PIC16F527-I/JP (тот же форм-фактор и посадочное место) — отличается по Operational Amplifiers, Package, ADC, Comparators, Core Architecture.

Microchip Technology
Operational Amplifiers: 2 on-chip
Package: 20-pin UQFN (3x3 mm) with exposed pad
ADC: 8-bit, 8 channels
Microchip Technology
Operational Amplifiers: 2 on-chip op amps
Package: 20-pin PDIP (P) through-hole
Comparators: 2 on-chip analog comparators
Microchip Technology
Operational Amplifiers: 2 (rail-to-rail I/O)
Package: 20-pin QFN (ML), 4x4 mm with exposed pad
ADC: 8-bit resolution, multi-channel
Microchip Technology
Operational Amplifiers: 2 integrated op amps
Package: 20-SOIC
ADC: On-board 8-bit ADC
Microchip Technology
Operational Amplifiers: 2 integrated
Package: 20-pin UQFN (3x3 mm) with exposed pad
ADC: 8-bit integrated

PIC16F527-I/JP

✅ Прямая замена
Microchip Technology
📦 20-UQFN (3x3)
8-bit PIC microcontroller · 20 MHz · 1.5 KB Flash, organized as 1K x 12 · 64 bytes RAM · 8-bit ADC · 2 integrated operational amplifiers · 2 integrated comparators · -40°C to +85°C

Уточнить цену

Открыть даташит →

PIC16F527-I/SS

✅ Прямая замена ⚠️ Характеристики не проверены
📦 20-UQFN (3x3)
Same PIC16F527 family, 20 MHz and 1.5 KB Flash with a 20-UQFN footprint; suffix and temperature/programming details must be verified

📋 Справочный аналог (нет в каталоге)

PIC16F527-I/MO

✅ Прямая замена ⚠️ Характеристики не проверены
📦 20-UQFN (3x3)
Same PIC16F527 family and 20 MHz, 1.5 KB Flash device ratings in the 20-UQFN family; exact suffix features require confirmation

📋 Справочный аналог (нет в каталоге)

PIC16F527-I/ML

✅ Прямая замена ⚠️ Характеристики не проверены
Microchip Technology
📦 20-UQFN (3x3)
8-bit PIC16 RISC, Harvard · 1.5 KB Flash (1K x 14 words) · 128 bytes · 20 MHz (4 MIPS instruction rate) · 2.0 V to 5.5 V · -40C to +85C (Industrial) · 8-bit resolution, multi-channel

Уточнить цену

Открыть даташит →

PIC16F527-I/SO

✅ Прямая замена
Microchip Technology
📦 20-UQFN (3x3)
8-bit Flash PIC Microcontroller · 8-bit · 20 MHz · 1.5 KB Flash · 1K x 12 words · On-board 8-bit ADC · 2 integrated op amps · 2 integrated comparators

Уточнить цену

Открыть даташит →

PIC16F527-I/JP Максимальные параметры и электрические характеристики

Architecture 8-bit PIC microcontroller
Maximum Operating Frequency 20 MHz
Program Memory 1.5 KB Flash, organized as 1K x 12
Data Memory 64 bytes RAM
ADC 8-bit ADC
Operational Amplifiers 2 integrated operational amplifiers
Comparators 2 integrated comparators
Диапазон рабочих температур -40°C to +85°C
Корпус 20-UQFN, 3x3 mm
Тип монтажа Surface mount
Program Memory Type Flash programmable
Supported Programming Flash programming
Hardware Interrupts Supported
Watchdog Timer Supported
Brown-Out Reset Supported

Руководство по цоколевке PIC16F527-I/JP в корпусе 20-uqfn, 3x3 mm

Цоколевка для PIC16F527-I/JP (корпус 20-uqfn, 3x3 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса 20-uqfn, 3x3 mm для PIC16F527-I/JP

Нет подробных данных о распиновке для PIC16F527-I/JP.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

PIC16F527-I/JP подходит для 6 применениеs: Industrial Sensor Interface, Low-Cost Measurement Instrument, Consumer Control Module, Embedded Analog Monitor, Compact Power and Control System, Programmable Logic Controller.

🏭

Industrial Sensor Interface

The PIC16F527-I/JP fits compact sensor-interface modules because its 8-bit ADC can digitize analog inputs while two integrated operational amplifiers and two comparators support conditioning, thresholding, and local alarms. At 20 MHz with 1.5 KB of Flash and 64 bytes of RAM, it can manage moderate control tasks without a separate analog controller. The -40°C to +85°C range is suitable for many industrial environments. Keep the analog and digital grounds separated according to the manufacturer layout guidance, and validate ADC accuracy against the sensor output range.

🧩

Low-Cost Measurement Instrument

The PIC16F527-I/JP is suitable for a compact measurement instrument that combines sensor acquisition with local display or communications. Its 8-bit ADC supports basic voltage and resistance measurements, while the integrated comparators can implement simple threshold functions without additional analog ICs. The 20 MHz core provides enough response for straightforward sampling and control logic, and Flash memory permits reusable firmware. Calibration constants should be stored in nonvolatile memory, with ADC reference and measurement accuracy verified against the product requirements.

📱

Consumer Control Module

The PIC16F527-I/JP can serve as the control MCU in a small consumer appliance, keypad controller, or configurable I/O module. Its integrated ADC, op amps, and comparators allow the board to monitor buttons, potentiometers, temperature elements, or simple analog indicators while the 8-bit processor handles state logic. The 20-UQFN 3x3 mm package supports compact PCB layouts, and Flash memory enables field reprogramming or product configuration. Firmware should include watchdog, brown-out, and invalid-state recovery routines for dependable consumer operation.

🔧

Embedded Analog Monitor

The PIC16F527-I/JP is well matched to an embedded analog monitor that must continuously evaluate one or more sensor lines. Two comparators can provide fast threshold flags, while the two op amps can buffer or amplify signals before the 8-bit ADC performs conversion. The MCU can combine these results with operating state, alarms, and data logging at a 20 MHz clock. Designers should define input protection, bandwidth, and grounding before layout, then verify the selected analog functions and pin multiplexing against the device pin-description table.

⚡

Compact Power and Control System

The PIC16F527-I/JP can act as a supervisory controller in a compact power or peripheral-control subsystem. It can monitor analog operating points through the ADC, use comparators for limit detection, and control sequencing with its general-purpose I/O. The 20 MHz processing rate is appropriate for routine state-machine logic, while 1.5 KB of Flash supports focused control firmware. Use the brown-out reset and watchdog functions for fault recovery, and account for the exposed-pad thermal path when the package is mounted in a small enclosure.

🏭

Programmable Logic Controller

The PIC16F527-I/JP is appropriate for small PLC-like or equipment-control modules where discrete inputs, analog monitoring, and local actuator logic must share a compact controller. Its integrated analog resources reduce the need for separate signal-conditioning components, and hardware interrupts, watchdog timing, and brown-out reset support reliable unattended operation. The 64 bytes of RAM limits complex buffering, so the firmware should favor direct sampling and event-based processing. Validate every output's startup state and include safe-state handling for power-loss and firmware-reset conditions.

What is the PIC16F527-I/JP?
The PIC16F527-I/JP is an 8-bit PIC microcontroller with a 20 MHz operating speed, 1.5 KB of Flash program memory, 64 bytes of data memory, an 8-bit ADC, two operational amplifiers, and two comparators. It is packaged in a 20-UQFN 3x3 mm package, making it suitable for compact embedded control and analog-monitoring designs.
What are the key specifications of PIC16F527-I/JP?
The PIC16F527-I/JP combines an 8-bit architecture with 20 MHz operation, 1.5 KB of Flash memory, 64 bytes of data memory, and integrated analog peripherals. Its 8-bit ADC, dual op amps, and two comparators are the main differentiating features for cost-sensitive applications. The manufacturer identifies a 20-UQFN 3x3 mm package and a -40°C to +85°C temperature range.
Where can I download the PIC16F527-I/JP datasheet PDF?
The official PIC16F527-I/JP datasheet is available from Microchip Technology at https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/40001652D.pdf. Use the manufacturer data sheet for the complete electrical characteristics, 20-UQFN pin table, memory map, timing data, and recommended application circuits.
Where can I find the PIC16F527-I/JP pinout?
The PIC16F527-I/JP pinout is documented in the manufacturer PIC16F527 data sheet, including the 20-UQFN 3x3 mm package drawing and pin-description table. Use that table when assigning I/O, power, ground, analog, programming, and exposed-pad connections because several peripheral functions can be multiplexed onto the same pins.
What is the operating temperature range of PIC16F527-I/JP?
The PIC16F527-I/JP is specified for an operating temperature range of -40°C to +85°C. This range supports industrial and commercial equipment where the device must operate above the typical commercial-temperature range while remaining within the limits stated for the -I/JP ordering option.
Where can I buy PIC16F527-I/JP online?
The PIC16F527-I/JP can be requested through the Request a Quote form on this page. The form is the appropriate route for checking current commercial availability, package quantity, and lead time for the exact 20-UQFN ordering code rather than a different package suffix.
What is the price of PIC16F527-I/JP?
Current commercial pricing for the PIC16F527-I/JP should be obtained through the Request a Quote form on this page. The form allows a buyer to request the exact MPN, quantity, and delivery terms so that the commercial response reflects current inventory and procurement conditions.
What is the lead time for PIC16F527-I/JP?
The current lead time for PIC16F527-I/JP should be requested through the Request a Quote form on this page. Provide the required quantity and target shipment date so procurement can confirm the available supply channel and manufacturing schedule for the exact -I/JP suffix.
Is PIC16F527-I/JP in stock?
Stock status for PIC16F527-I/JP should be confirmed through the Request a Quote form on this page. Because availability can change by package suffix, order quantity, and delivery schedule, request the exact PIC16F527-I/JP MPN and your required delivery plan.
What can replace the PIC16F527-I/JP?
A valid replacement should match the PIC16F527-I/JP 20-UQFN footprint, pin functions, memory capacity, operating frequency, analog peripherals, and temperature range. The available cross-reference results do not establish five or more verified drop-in alternatives, so substitute parts must be checked against the Microchip pin and compatibility tables before approval rather than treated as automatic replacements.
Is PIC16F527-I/SO a drop-in replacement for PIC16F527-I/JP?
No. The PIC16F527-I/SO uses a 20-SOIC package, whereas the PIC16F527-I/JP uses a 20-UQFN 3x3 mm package. The two package outlines and land patterns are different, so the -I/SO part requires a PCB footprint change and is not a true drop-in replacement for -I/JP.
When should I choose PIC16F527-I/JP over another 8-bit MCU?
Choose the PIC16F527-I/JP when a design needs an 8-bit controller with 20 MHz operation, 1.5 KB of Flash, 64 bytes of RAM, and integrated analog functions in a compact 20-UQFN package. It is especially useful when the ADC, two op amps, and two comparators can replace separate analog components and when the board area is constrained.
Is PIC16F527-I/JP suitable for industrial sensor interfaces?
The PIC16F527-I/JP is suitable for many industrial sensor-interface designs because it combines an 8-bit ADC, two operational amplifiers, two comparators, Flash memory, and a -40°C to +85°C operating range. Final suitability depends on the sensor signal range, required accuracy, supply limits, isolation, EMC requirements, and qualification needs of the finished product.
PIC16F527-I/JP vs PIC16F570: which is more appropriate?
PIC16F527-I/JP is appropriate when a compact 8-bit MCU with 1.5 KB of Flash, an 8-bit ADC, dual op amps, and two comparators is sufficient. PIC16F570 should be selected when its additional resources or device-specific functions are required. Both devices are documented in Microchip's combined data sheet, but the exact package and ordering suffix must also match.
What is the best Microchip equivalent for PIC16F527-I/JP?
The best equivalent is the Microchip device that matches the original's 20-UQFN pinout, 8-bit core, 20 MHz maximum frequency, 1.5 KB Flash capacity, 64-byte RAM, analog peripherals, and temperature grade. PIC16F527-I/SO is not equivalent for PCB reuse because it uses 20-SOIC; use Microchip's cross-reference and pin-compatibility tools to confirm any proposed replacement.

Справочные инженерные данные для PIC16F527-I/JP — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the PIC16F527-I/JP when the design needs a compact 8-bit MCU with 20 MHz operation, 1.5 KB of Flash, 64 bytes of RAM, an 8-bit ADC, two op amps, and two comparators in a 20-UQFN 3x3 mm footprint. Its integrated analog resources can reduce component count in sensor, measurement, and control products. PIC16F527-I/SO is not a drop-in substitute because it uses 20-SOIC. Other PIC16F527 ordering options may be suitable only after their package, temperature range, programming configuration, and exposed-pad details are confirmed against the original design. For applications requiring substantially more memory, wider data handling, or a different peripheral set, move to a larger MCU family rather than forcing the PIC16F527 into a workload it was not designed for.

Сравнение с аналогами

Параметр Этот товар PIC16F527-I/JP PIC16F527-I/SS PIC16F527-I/MO PIC16F527-I/ML PIC16F527-I/SO
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 20-UQFN (3x3) 20-UQFN (3x3) 20-UQFN (3x3) - suffix details require confirmation 20-UQFN (3x3) - suffix details require confirmation 20-UQFN (3x3) - suffix details require confirmation 20-SOIC - verified listing differs from target package
CPU Architecture 8-bit PIC 8-bit PIC 8-bit PIC family 8-bit PIC family 8-bit PIC family 8-bit PIC
Maximum Frequency 20 MHz 20 MHz 20 MHz 20 MHz 20 MHz 20 MHz
Flash Program Memory 1.5 KB, 1K x 12 1.5 KB, 1K x 12 1.5 KB 1.5 KB 1.5 KB 1.5 KB
Data Memory 64 bytes RAM 64 bytes RAM 64 bytes 64 bytes 64 bytes 64 bytes
ADC 8-bit ADC 8-bit ADC 8-bit ADC 8-bit ADC 8-bit ADC 8-bit ADC
Integrated Analog Resources 2 op amps and 2 comparators 2 op amps and 2 comparators 2 op amps and 2 comparators 2 op amps and 2 comparators 2 op amps and 2 comparators 2 op amps and 2 comparators

Ключевые отличия

  • Integrated analog block reduces external components (против PIC16F527-I/SO)
  • Compact 3x3 mm footprint supports space-constrained boards (против PIC16F527-I/SO)
  • 20 MHz processing with 1.5 KB Flash (против PIC16F527-I/SS)

Заметки по проектированию

Follow the manufacturer 20-UQFN land pattern and exposed-pad guidance exactly. Place input and output decoupling capacitors close to their associated pins, route analog inputs away from fast-switching nodes, and provide a continuous ground reference under the package where the recommended layout allows it. Verify courtyard, solder mask, paste, and reflow profiles against the Microchip package drawing before releasing PCB artwork.

Use separate analog and digital grounding strategies when the ADC, comparators, or op amps monitor low-level signals. Keep sensor traces short, use suitable series resistance where transient or capacitive loading is expected, and connect the analog reference and supply pins with low-impedance traces. Validate the final sampling accuracy with the actual source impedance, acquisition time, and filtering network.

Design the supply network for both the MCU rail and any analog load connected to the same board. Check input voltage limits, regulator tolerance, startup current, and the voltage required by every selected peripheral. Brown-out reset should be enabled in firmware, while the watchdog provides a recovery path if firmware stalls. Confirm whether a power-on reset or external supervisor is needed for the finished equipment.

Do not treat a same-family MCU as interchangeable solely because the suffix differs. Confirm the exact package dimensions, pin functions, programming configuration, temperature grade, and exposed-pad connection in the ordering information and pin-compatibility chart. In particular, the verified PIC16F527-I/SO listing uses 20-SOIC and therefore cannot replace the 20-UQFN target without a PCB change.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

Compliance status was not established by the manufacturer page or datasheet snippets for this ordering code. Confirm RoHS, REACH, terminal composition, and automotive qualification directly with Microchip before release.

Данные проверены: 2026-11-15 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

PIC16F527-I/JP datasheet PIC16F527-I/JP pinout PIC16F527-I/JP datasheet pdf PIC16F527-I/JP specifications PIC16F527-I/JP equivalent PIC16F527-I/JP replacement PIC16F527-I/JP cross reference PIC16F527-I/JP vs PIC16F527-I/SO PIC16F527 20-UQFN pinout PIC16F527 20MHz 1.5KB Flash MCU PIC16F527 ADC op amp comparator PIC16F527-I/JP price PIC16F527-I/JP stock Microchip PIC16F527-I/JP PIC16F527-I/JP sensor interface

Связанные компоненты & термины

Microchip Technology PIC16F527-I/JP PIC16F527 PIC16F527-I/SO PIC16F570 PIC16 microcontroller 8-bit microcontroller Flash programmable microcontroller embedded control 20 MHz 1.5 KB Flash memory 64 bytes RAM 8-bit ADC operational amplifier comparator 20-UQFN QFN package family surface mount package sensor interface industrial control watchdog timer brown-out reset hardware interrupts programmable logic controller
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ