PIC16F527-I/JP 8-Bit 20MHz 1.5KB Flash MCU | Microchip
料号: PIC16F527-I/JP ✓ 量产中PIC16F527-I/JP 概述
PIC microcontrollers are 8-bit microcontrollers intended for control-oriented applications where a small instruction set, integrated peripherals, and economical packaging can simplify product development. The PIC16F527 combines the PIC16 MCU family with an ADC, dual op amps, and comparators, allowing a design to monitor and control analog signals without requiring separate analog ICs for every function.
Key features include 20 MHz operation, 1.5 KB of Flash memory, 64 bytes of data memory, and an 8-bit ADC. The integrated dual operational amplifiers and two comparators are useful for sensor conditioning, threshold detection, and local signal processing. The -40°C to +85°C temperature range supports industrial and commercial temperature environments.
The device is programmed through the PIC16F527 programming interface and uses Flash memory for in-system or production programming. The 20-UQFN package provides a small PCB footprint, while the exposed-pad configuration requires appropriate PCB thermal and assembly design. The device family also supports hardware interrupts, watchdog timing, and brown-out reset functions for more reliable autonomous operation.
Typical applications include compact industrial controllers, sensor interfaces, low-cost measurement instruments, consumer control products, and embedded analog monitoring systems. It is particularly suitable when an 8-bit MCU can handle the application logic while its integrated ADC, op amps, and comparators reduce the number of external components.
When designing a board, follow the Microchip datasheet for the exact 20-UQFN land pattern, exposed-pad connection, recommended decoupling, programming-test points, and pin multiplexing. Confirm the required operating voltage and peripheral assignments in the device-specific pin table before finalizing the PCB and firmware.
直接替换替代料: PIC16F527-I/JP ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: PIC16F527-I/JP (相同外形与封装尺寸) ——差异在于 Operational Amplifiers, Package, ADC, Comparators, Core Architecture.
PIC16F527-I/JP
✅ 直接替换联系询价
查看数据手册 →PIC16F527-I/SS
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
PIC16F527-I/MO
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
PIC16F527-I/ML
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →PIC16F527-I/SO
✅ 直接替换联系询价
查看数据手册 →PIC16F527-I/JP 最大额定值与电气特性
| Architecture | 8-bit PIC microcontroller |
| Maximum Operating Frequency | 20 MHz |
| Program Memory | 1.5 KB Flash, organized as 1K x 12 |
| Data Memory | 64 bytes RAM |
| ADC | 8-bit ADC |
| Operational Amplifiers | 2 integrated operational amplifiers |
| Comparators | 2 integrated comparators |
| 工作温度范围 | -40°C to +85°C |
| 封装 | 20-UQFN, 3x3 mm |
| 安装类型 | Surface mount |
| Program Memory Type | Flash programmable |
| Supported Programming | Flash programming |
| Hardware Interrupts | Supported |
| Watchdog Timer | Supported |
| Brown-Out Reset | Supported |
PIC16F527-I/JP 20-uqfn, 3x3 mm 引脚配置指南
PIC16F527-I/JP(20-uqfn, 3x3 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: PIC16F527-I/JP.
请参阅 数据手册 以查看完整引脚配置。
典型应用
PIC16F527-I/JP 适用于 6 应用s: Industrial Sensor Interface, Low-Cost Measurement Instrument, Consumer Control Module, Embedded Analog Monitor, Compact Power and Control System, Programmable Logic Controller.
Industrial Sensor Interface
The PIC16F527-I/JP fits compact sensor-interface modules because its 8-bit ADC can digitize analog inputs while two integrated operational amplifiers and two comparators support conditioning, thresholding, and local alarms. At 20 MHz with 1.5 KB of Flash and 64 bytes of RAM, it can manage moderate control tasks without a separate analog controller. The -40°C to +85°C range is suitable for many industrial environments. Keep the analog and digital grounds separated according to the manufacturer layout guidance, and validate ADC accuracy against the sensor output range.
推荐
Low-Cost Measurement Instrument
The PIC16F527-I/JP is suitable for a compact measurement instrument that combines sensor acquisition with local display or communications. Its 8-bit ADC supports basic voltage and resistance measurements, while the integrated comparators can implement simple threshold functions without additional analog ICs. The 20 MHz core provides enough response for straightforward sampling and control logic, and Flash memory permits reusable firmware. Calibration constants should be stored in nonvolatile memory, with ADC reference and measurement accuracy verified against the product requirements.
推荐
Consumer Control Module
The PIC16F527-I/JP can serve as the control MCU in a small consumer appliance, keypad controller, or configurable I/O module. Its integrated ADC, op amps, and comparators allow the board to monitor buttons, potentiometers, temperature elements, or simple analog indicators while the 8-bit processor handles state logic. The 20-UQFN 3x3 mm package supports compact PCB layouts, and Flash memory enables field reprogramming or product configuration. Firmware should include watchdog, brown-out, and invalid-state recovery routines for dependable consumer operation.
推荐
Embedded Analog Monitor
The PIC16F527-I/JP is well matched to an embedded analog monitor that must continuously evaluate one or more sensor lines. Two comparators can provide fast threshold flags, while the two op amps can buffer or amplify signals before the 8-bit ADC performs conversion. The MCU can combine these results with operating state, alarms, and data logging at a 20 MHz clock. Designers should define input protection, bandwidth, and grounding before layout, then verify the selected analog functions and pin multiplexing against the device pin-description table.
推荐
Compact Power and Control System
The PIC16F527-I/JP can act as a supervisory controller in a compact power or peripheral-control subsystem. It can monitor analog operating points through the ADC, use comparators for limit detection, and control sequencing with its general-purpose I/O. The 20 MHz processing rate is appropriate for routine state-machine logic, while 1.5 KB of Flash supports focused control firmware. Use the brown-out reset and watchdog functions for fault recovery, and account for the exposed-pad thermal path when the package is mounted in a small enclosure.
推荐
Programmable Logic Controller
The PIC16F527-I/JP is appropriate for small PLC-like or equipment-control modules where discrete inputs, analog monitoring, and local actuator logic must share a compact controller. Its integrated analog resources reduce the need for separate signal-conditioning components, and hardware interrupts, watchdog timing, and brown-out reset support reliable unattended operation. The 64 bytes of RAM limits complex buffering, so the firmware should favor direct sampling and event-based processing. Validate every output's startup state and include safe-state handling for power-loss and firmware-reset conditions.
推荐
推荐产品汇总
工程参考数据: PIC16F527-I/JP ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | PIC16F527-I/JP | PIC16F527-I/SS | PIC16F527-I/MO | PIC16F527-I/ML | PIC16F527-I/SO |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-UQFN (3x3) | 20-UQFN (3x3) | 20-UQFN (3x3) - suffix details require confirmation | 20-UQFN (3x3) - suffix details require confirmation | 20-UQFN (3x3) - suffix details require confirmation | 20-SOIC - verified listing differs from target package |
| CPU Architecture | 8-bit PIC | 8-bit PIC | 8-bit PIC family | 8-bit PIC family | 8-bit PIC family | 8-bit PIC |
| Maximum Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Flash Program Memory | 1.5 KB, 1K x 12 | 1.5 KB, 1K x 12 | 1.5 KB | 1.5 KB | 1.5 KB | 1.5 KB |
| Data Memory | 64 bytes RAM | 64 bytes RAM | 64 bytes | 64 bytes | 64 bytes | 64 bytes |
| ADC | 8-bit ADC | 8-bit ADC | 8-bit ADC | 8-bit ADC | 8-bit ADC | 8-bit ADC |
| Integrated Analog Resources | 2 op amps and 2 comparators | 2 op amps and 2 comparators | 2 op amps and 2 comparators | 2 op amps and 2 comparators | 2 op amps and 2 comparators | 2 op amps and 2 comparators |
关键差异点
- Integrated analog block reduces external components (对比 PIC16F527-I/SO)
- Compact 3x3 mm footprint supports space-constrained boards (对比 PIC16F527-I/SO)
- 20 MHz processing with 1.5 KB Flash (对比 PIC16F527-I/SS)
设计说明
Follow the manufacturer 20-UQFN land pattern and exposed-pad guidance exactly. Place input and output decoupling capacitors close to their associated pins, route analog inputs away from fast-switching nodes, and provide a continuous ground reference under the package where the recommended layout allows it. Verify courtyard, solder mask, paste, and reflow profiles against the Microchip package drawing before releasing PCB artwork.
Use separate analog and digital grounding strategies when the ADC, comparators, or op amps monitor low-level signals. Keep sensor traces short, use suitable series resistance where transient or capacitive loading is expected, and connect the analog reference and supply pins with low-impedance traces. Validate the final sampling accuracy with the actual source impedance, acquisition time, and filtering network.
Design the supply network for both the MCU rail and any analog load connected to the same board. Check input voltage limits, regulator tolerance, startup current, and the voltage required by every selected peripheral. Brown-out reset should be enabled in firmware, while the watchdog provides a recovery path if firmware stalls. Confirm whether a power-on reset or external supervisor is needed for the finished equipment.
Do not treat a same-family MCU as interchangeable solely because the suffix differs. Confirm the exact package dimensions, pin functions, programming configuration, temperature grade, and exposed-pad connection in the ordering information and pin-compatibility chart. In particular, the verified PIC16F527-I/SO listing uses 20-SOIC and therefore cannot replace the 20-UQFN target without a PCB change.
合规信息
Compliance status was not established by the manufacturer page or datasheet snippets for this ordering code. Confirm RoHS, REACH, terminal composition, and automotive qualification directly with Microchip before release.