Microchip Technology

PIC16F77T-E/ML - 8-Bit 20MHz 14KB Flash MCU | Microchip

Артикул: PIC16F77T-E/ML ✓ Активен
5V Vdss 44-pin VQFN exposed-pad package Package 20MHz Speed 14KB (8K x 14 words) Memory
MOQ: 1 |

PIC16F77T-E/ML Обзор

The Microchip Technology PIC16F77T-E/ML is an 8-bit PIC microcontroller with 14KB of Flash program memory, 368 bytes of RAM, 33 I/O pins, and a maximum speed of 20MHz, housed in a 44-pin VQFN exposed-pad package. It uses a CMOS Flash architecture and an external oscillator. The device is designed for embedded control applications requiring programmable memory, analog conversion, digital I/O, and flexible timing.

A PIC16 microcontroller is a compact RISC-based embedded controller that combines a CPU core, Flash program memory, data RAM, I/O ports, timers, and analog peripherals on one semiconductor die. PIC16F77 devices belong to the PIC16 family hierarchy: PIC16 MCU, 8-bit microcontroller, embedded microcontroller, and general-purpose semiconductor. The PIC16F77 is suitable when a design needs more I/O and program memory than smaller 28-pin members while retaining a mature, widely supported programming architecture.

Key specifications include 14KB of Flash memory organized as 8K x 14 words, 368 x 8 bits of RAM, 33 available I/O lines, and 20MHz operation. The manufacturer describes a 200ns instruction execution capability and an instruction set containing 35 single-word instructions. The -E device grade is intended for extended-temperature operation, while the T suffix identifies the tape-and-reel shipping configuration.

The integrated analog and digital resources allow the PIC16F77T-E/ML to serve as a central controller for industrial equipment, measurement systems, data acquisition, motor-control interfaces, display systems, and connected embedded products. Its Flash memory supports in-system reprogramming and field updates, while the exposed thermal pad helps remove heat from the device when the PCB provides adequate copper area.

The external oscillator requirement means the board must provide a suitable clock source and associated decoupling. The 44-pin VQFN exposed-pad package also demands careful land-pattern and thermal design. Keep the exposed pad connected to the intended ground or power plane according to the manufacturer pinout, and follow the package drawing and PCB guidelines for soldering, vias, and copper spreading.

This page combines the manufacturer architecture information, package and memory characteristics, application guidance, and engineering-focused replacement considerations. For procurement, use the Request a Quote form on this page to request current pricing, stock, lead time, and manufacturer-approved supply information for the exact 44-VQFN exposed-pad ordering code.

Аналоги без доработки для PIC16F77T-E/ML — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с PIC16F77T-E/ML (тот же форм-фактор и посадочное место) — отличается по Package, RAM, ADC Channels, Core Architecture, Operating Temperature Range.

Microchip Technology
Package: 44-pin UQFN EP (5x5 mm, 0.5 mm pitch)
RAM: 363 bytes
Core Architecture: PIC16 enhanced mid-range 8-bit RISC
Microchip Technology
Package: 44-pin VQFN with exposed pad
RAM: 368 bytes
Core Architecture: 8-bit PIC
Microchip Technology
Package: 44-pin VQFN (ML) with exposed pad, 8x8 mm
RAM: 368 bytes
ADC Channels: 8 channels, 8-bit resolution
Microchip Technology
Package: 44-pin QFN (8x8 mm) with exposed thermal pad (ML)
Core Architecture: PIC16 (RISC, Harvard bus)
Operating Temperature Range: -40 C to +125 C (Extended, -E suffix)
Microchip Technology
Package: 44-QFN (8x8 mm) with exposed pad
RAM: 368 x 8 bits
ADC Channels: 8 channels

PIC16F77T-I/ML

✅ Прямая замена
Microchip Technology
📦 44-pin VQFN exposed-pad package
8-bit CMOS Flash PIC microcontroller · 20MHz · 200ns · 35 single-word instructions · 14KB (8K x 14 words) · Flash · 368 x 8 bits · 33 pins

Уточнить цену

Открыть даташит →

PIC16F77-E/ML

✅ Прямая замена ⚠️ Характеристики не проверены
Microchip Technology
📦 44-pin VQFN exposed-pad package
8-bit microcontroller · 20 MHz · 14KB flash · 8K x 14 words · 368 bytes · 33 lines · 8-channel, 8-bit · 2 timers

Уточнить цену

Открыть даташит →

PIC16F77-I/ML

✅ Прямая замена ⚠️ Характеристики не проверены
Microchip Technology
📦 44-pin VQFN exposed-pad package
PIC16F (mid-range 8-bit) · Flash (in-system programmable) · 14 KB · 368 bytes · 8-bit PIC16 RISC (Harvard architecture) · 20 MHz · 2.0 V to 5.5 V

Уточнить цену

Открыть даташит →

PIC16F777-E/ML

✅ Прямая замена
Microchip Technology
📦 44-pin VQFN exposed-pad package
8-bit Microcontroller (MCU) · PIC16 (RISC, Harvard bus) · 14 KB · 368 bytes · 256 bytes · 20 MHz (200 ns instruction cycle) · 2.0 V to 5.5 V · -40 C to +125 C (Extended, -E suffix)

Уточнить цену

Открыть даташит →

PIC16F707-I/ML

✅ Прямая замена
Microchip Technology
📦 44-pin VQFN exposed-pad package
PIC16 enhanced mid-range 8-bit RISC · 14 KB flash · 363 bytes · 256 bytes · 20 MHz · 2.5 V to 5.5 V · 1.8 V to 3.6 V · 36

Уточнить цену

Открыть даташит →

PIC16F77T-E/ML Максимальные параметры и электрические характеристики

Device Type 8-bit CMOS Flash PIC microcontroller
Program Memory Size 14KB (8K x 14 words)
RAM Size 368 x 8 bits
Number of I/O Pins 33
Maximum Speed 20MHz
Напряжение питания 5V
Oscillator Type External
Architecture PIC RISC
Instruction Execution Time 200ns
Single-Word Instructions 35
ADC Channels 8 channels of 8-bit A/D converter
Корпус 44-pin VQFN exposed-pad package
Shipping Configuration Tape and reel
Temperature Grade Extended-temperature grade
Тип монтажа Surface mount

Руководство по цоколевке PIC16F77T-E/ML в корпусе 44-pin vqfn exposed-pad package

Цоколевка для PIC16F77T-E/ML (корпус 44-pin vqfn exposed-pad package). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса 44-pin vqfn exposed-pad package для PIC16F77T-E/ML

Нет подробных данных о распиновке для PIC16F77T-E/ML.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

PIC16F77T-E/ML подходит для 6 применениеs: Industrial Data Acquisition, Motor Control Interface, HVAC and Environmental Control, Appliance Control, LED Lighting Controller, Programmable Logic Controller.

🏭

Industrial Data Acquisition

PIC16F77T-E/ML fits industrial measurement systems that require an 8-bit A/D converter, 33 I/O lines, and 14KB of Flash program memory in one controller. The 20MHz maximum operating speed allows control software to sample inputs, apply calibration, and format results while leaving I/O available for sensors and actuators. Its external oscillator makes the timing plan predictable, while the extended-temperature grade supports industrial ambient conditions. Use an isolated analog front end, reference design, and appropriately decoupled supply rather than connecting noisy inputs directly to the controller.

⚡

Motor Control Interface

The PIC16F77T-E/ML can coordinate a stepper-motor or small DC-motor interface where firmware needs timers, numerous digital control signals, and local logic rather than a high-performance motor-control peripheral. Its 33 I/O lines allow encoder, limit-switch, driver-enable, and fault signals to be managed locally, while 14KB of Flash provides room for motion sequences. The 20MHz clock supports deterministic control loops, and the external oscillator allows the clock source to match system timing needs. Drive transistors and protection networks still require separate design.

🧩

HVAC and Environmental Control

PIC16F77T-E/ML is appropriate for temperature, humidity, airflow, and equipment-control panels where an embedded controller must combine analog inputs with relays, indicators, and communication interfaces. The 8-bit converter can process sensor channels after appropriate signal conditioning, while 33 I/O lines simplify panel wiring and provide capacity for status LEDs, switches, and actuator commands. The extended-temperature grade supports the stated industrial use case, and Flash permits configuration changes for different equipment families. Validate sensor accuracy, relay isolation, and EMC performance in the final enclosure.

🔧

Appliance Control

PIC16F77T-E/ML can serve as the central controller in an appliance or instrumentation product combining user inputs, displays, sensors, and powered outputs. Its 14KB Flash program memory supports a bootloader, operating-state logic, diagnostics, and configuration storage, while 368 bytes of RAM is suitable for compact working variables and communication buffers. The 20MHz device speed supports responsive control, and the 44-pin VQFN package reduces board area compared with larger leaded packages. Designers must observe exposed-pad soldering and thermal-copper requirements during assembly.

💡

LED Lighting Controller

PIC16F77T-E/ML can control addressable or multiplexed LED systems where firmware coordinates multiple outputs, timing sequences, user commands, and fault monitoring. Its 33 I/O lines provide ample digital connectivity for LED data lines, mode controls, and interlocks, while the 20MHz clock supports precise timing of updates. The 8-bit converter can also supervise a current or temperature feedback signal after suitable conditioning. Use driver transistors rather than driving LED current directly from the microcontroller, and separate high-current switching paths to minimize noise and ground bounce.

🖥️

Programmable Logic Controller

PIC16F77T-E/ML is suitable for a compact PLC-like control module that executes ladder-style logic or state-machine firmware across numerous digital inputs and outputs. The 8-bit core, 14KB Flash memory, 368 bytes of RAM, and 33 I/O lines provide enough resources for small machines, test fixtures, and equipment controllers. An external clock supports repeatable task scheduling, while the extended-temperature grade addresses industrial environments. Keep input protection, isolation, relay or transistor drive, and expansion interfaces outside the microcontroller so the control logic remains testable and serviceable.

What are the key specifications of PIC16F77T-E/ML that engineers should know?
The PIC16F77T-E/ML is an 8-bit PIC RISC Flash microcontroller rated up to 20MHz with 14KB of program memory, 368 bytes of RAM, and 33 I/O pins. According to the Microchip PIC16F77 product page, the device provides 200ns instruction execution and a 35-instruction single-word set. It is packaged in a 44-pin VQFN with an exposed pad and uses an external oscillator. The -E suffix denotes the extended-temperature grade, while /ML identifies the package and tape-and-reel configuration.
Where can I download the PIC16F77T-E/ML datasheet PDF?
The PIC16F77 datasheet and device documentation are available through the Microchip PIC16F77 product page at https://www.microchip.com/en-us/product/PIC16F77. The family documentation covers the 28/40/44-pin devices, Flash program memory, RAM, I/O, analog converter functions, package options, and programming information. For PCB implementation, use the 44-pin VQFN exposed-pad drawing and pin table for the exact package rather than relying on a drawing for the 40-pin or 28-pin variants.
What is the operating speed and memory capacity of PIC16F77T-E/ML?
The PIC16F77T-E/ML operates up to 20MHz and contains 14KB of Flash program memory arranged as 8K x 14 words. According to Microchip's PIC16F77 product description, the MCU executes instructions in as little as 200ns and uses a set of 35 single-word instructions. It also provides 368 bytes of data RAM. These resources distinguish it from smaller PIC16 devices intended for basic digital control and make it suitable for firmware with multiple control loops and peripheral routines.
What package does PIC16F77T-E/ML use and how many pins are available?
PIC16F77T-E/ML is a 44-pin VQFN exposed-pad surface-mount package with 33 I/O pins. The exposed pad is an electrical and thermal feature that must be implemented according to the manufacturer's package drawing rather than treated as an unused lead. Although the device family is also offered in other packages, including PLCC and other 44-pin arrangements, the /ML ordering code specifically identifies the QFN form factor. Verify the pad geometry and pin numbering before releasing artwork.
PIC16F77T-E/ML vs PIC16F77T-I/ML: which is better for industrial use?
PIC16F77T-E/ML and PIC16F77T-I/ML use the same 44-pin VQFN exposed-pad package, but their temperature grades differ. The E version is the extended-temperature choice, while the I version is the industrial-temperature choice. Because the temperature suffix changes the environmental rating rather than the memory size or core architecture, either can share the PCB footprint. The correct selection depends on the required ambient and junction-temperature limits, and firmware validation should use the electrical limits for the chosen suffix.
When should I choose PIC16F77T-E/ML over PIC16F77-E/ML?
Choose PIC16F77T-E/ML when the production design requires tape-and-reel presentation for automated assembly; choose PIC16F77-E/ML when a different shipping format is more suitable for prototypes or manual handling. Both denote the same PIC16F77 device family and extended-temperature ordering family, with the suffix distinguishing the package or shipping option. Check the current ordering information to confirm whether the non-T version uses the identical 44-pin VQFN exposed-pad package and tape-and-reel configuration before treating it as a drop-in replacement.
What can replace PIC16F77T-E/ML without changing the PCB footprint?
The closest footprint-compatible choices are PIC16F77T-I/ML and other explicitly documented PIC16F77 package or temperature variants using the 44-pin VQFN exposed-pad outline. A replacement must match the exact pin assignments, exposed-pad connection, supply requirements, oscillator arrangement, Flash/RAM needs, peripheral set, and temperature grade. The online cross-reference results do not establish enough cross-brand pin compatibility to claim a substitute from another manufacturer. Request manufacturer cross-reference support when the replacement must be validated for production.
Is there a pin-compatible Microchip alternative to PIC16F77T-E/ML for a 44-pin VQFN design?
Microchip's pin and code compatibility chart is the appropriate starting point for a 44-pin VQFN design, but a pin-compatible footprint alone does not guarantee functional equivalence. The PIC16F707-I/ML appears in a comparison with the same 44-VQFN exposed-pad package designation, yet its peripheral configuration and programming requirements must be checked before substitution. For a true drop-in decision, compare every pin, memory requirement, oscillator connection, ADC function, timer resource, and software compatibility. The manufacturer cross-reference search should validate the final choice.
What is the best Microchip equivalent for PIC16F77T-E/ML?
The best equivalent is normally the PIC16F77T-I/ML when only the temperature grade changes and the industrial range satisfies the application. Both use the 44-pin VQFN exposed-pad package, 14KB Flash memory, 368-byte RAM, 20MHz maximum speed, and 33 I/O lines. For a broader replacement, use Microchip's cross-reference search and the family pin-and-code compatibility chart. Do not select a PIC16F707 or PIC16F777 solely by package name because internal peripherals and firmware behavior may differ.
Where can I buy PIC16F77T-E/ML and what is its current lead time?
Use the Request a Quote form on this page for current PIC16F77T-E/ML pricing, stock, minimum order quantity, and lead time. The request should identify the exact 44-pin VQFN exposed-pad ordering code PIC16F77T-E/ML and, where applicable, the required reel quantity. Current commercial status can change, so obtain a written quotation before committing the component to a production schedule. The component's programming, packaging, and environmental requirements should also be confirmed as part of the purchasing review.
How should the PIC16F77T-E/ML PCB footprint and exposed pad be designed?
Use the manufacturer's 44-pin VQFN exposed-pad land pattern rather than a generic QFN footprint. The exposed pad should be soldered according to the package drawing and connected to the same net specified by the pin table and pin-pack documentation. Provide thermal-vias or suitable copper spreading to achieve reliable assembly and heat dissipation. Confirm pin-one orientation, pad dimensions, solder-mask clearance, and paste volume during PCB review. Adequate ground-plane continuity is especially important for analog and digital return paths.
Can PIC16F77T-E/ML be used for an external-clock data-acquisition system?
PIC16F77T-E/ML is suitable for an external-clock data-acquisition controller because it uses an external oscillator, includes an 8-bit A/D converter, and provides 33 I/O lines. The manufacturer specifies 20MHz maximum operation, so the clock source and all associated timing must remain within the device's electrical limits. Use the analog inputs with suitable conditioning, provide local reference and bypass components according to the application circuit, and isolate noisy switching or motor-drive stages. Firmware must manage acquisition timing, scaling, and sensor inputs.
Does PIC16F77T-E/ML require an external oscillator?
Yes, PIC16F77T-E/ML is specified with an external oscillator. The exact oscillator circuit, frequency range, and I/O configuration must be taken from the PIC16F77 family documentation and evaluated with the application's timing requirements. A 20MHz clock is the stated maximum device speed, not a requirement to operate continuously at 20MHz. Crystal, ceramic-resonator, and external-clock arrangements have different component and layout considerations, so select one according to accuracy, cost, startup time, and electromagnetic-emissions requirements.
Is PIC16F77T-E/ML active and suitable for new designs?
Microchip lists the PIC16F77 family on its official product page, and the exact device is offered as an orderable catalog part in the current distribution results. This supports active product-family sourcing for new designs. Confirm the exact suffix, package, and lifecycle status when placing the production BOM because family availability and individual package variants can differ. For long-life programs, request the latest product lifecycle and documentation information from Microchip and include the chosen device in regular supply-chain reviews.
How should firmware migration be planned between PIC16F77T-E/ML and a replacement?
Plan firmware migration by comparing the complete device pin table, configuration words, oscillator setup, interrupt vectors, timer channels, A/D converter behavior, I/O direction registers, and memory map. A 44-pin VQFN footprint match establishes only physical compatibility. Recompile with the replacement's device-support library, verify peripheral register differences, and retest timing, ADC accuracy, startup behavior, and brownout conditions. For production approval, validate both the bare-metal image and any bootloader or application update path because code-compatible hardware does not necessarily imply feature-compatible software.

Справочные инженерные данные для PIC16F77T-E/ML — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose PIC16F77T-E/ML for a new design that requires a 44-pin VQFN exposed-pad footprint, an external clock, 14KB of Flash, 368 bytes of RAM, 33 I/O pins, and extended-temperature operation. PIC16F77T-I/ML is the most direct option when the industrial temperature grade is sufficient; its core resources and footprint remain the same. PIC16F77-E/ML can be considered when the required assembly or shipping format calls for the non-T ordering suffix, subject to confirmation of the current package configuration. PIC16F77-I/ML is appropriate where the I grade and non-T format meet production requirements. PIC16F777-E/ML may suit designs needing a related family with different memory and peripheral resources, while PIC16F707-I/ML is a more substantial firmware and peripheral migration. For either related-family replacement, compare every pin and register rather than relying on the shared package outline alone.

Сравнение с аналогами

Параметр Этот товар PIC16F77T-I/ML PIC16F77-E/ML PIC16F77-I/ML PIC16F777-E/ML PIC16F707-I/ML
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 44-pin VQFN exposed-pad package 44-pin VQFN exposed-pad package 44-pin VQFN exposed-pad package 44-pin VQFN exposed-pad package 44-pin VQFN exposed-pad package 44-pin VQFN exposed-pad package
CPU Architecture 8-bit PIC RISC 8-bit PIC RISC 8-bit PIC RISC 8-bit PIC RISC 8-bit PIC RISC 8-bit PIC RISC
Temperature Grade Extended temperature Industrial temperature Extended temperature Industrial temperature Extended temperature Industrial temperature

Ключевые отличия

  • Direct same-family temperature-grade alternative (против PIC16F77T-I/ML)
  • Extended-temperature option with the same PIC16F77 resource set (против PIC16F77-I/ML)
  • Identical core and package for manufacturing-format alternatives (против PIC16F77-E/ML)

Заметки по проектированию

Base the land pattern on the exact 44-pin VQFN exposed-pad drawing rather than a generic QFN footprint. Confirm pin-one orientation, pad length, exposed-pad dimensions, solder-mask clearance, and paste volume with the package qualification information. Provide the exposed pad with a continuous copper connection and an appropriate via pattern for thermal and electrical performance. A mismatch in exposed-pad geometry can create solder voids, weak joints, or inconsistent assembly yield.

Separate analog inputs, the A/D converter reference path, and external clock routing from switching outputs and high-current drivers. Keep the oscillator loop compact and away from switching nodes; route sensitive sensor inputs over a stable ground reference without crossing digital return-current paths. Place input protection and conditioning components close to their connector pins. These measures reduce conversion errors and oscillator jitter while preserving deterministic control behavior in industrial and appliance installations.

Design the supply network for the device's 5V operating requirement and place local bypass capacitance at the power pins with the shortest practical return path. Check the family documentation for the required capacitor value, voltage rating, and ESR limits; do not select a replacement solely by capacitance. Add supply filtering where noisy motors or switching converters share the board, and confirm that startup current, clock ramp, and brownout behavior do not create false resets.

A shared VQFN outline does not by itself prove that two MCUs are interchangeable. Verify every pin name, peripheral function, interrupt source, configuration-word behavior, and memory requirement before substituting PIC16F707 or PIC16F777 devices for PIC16F77T-E/ML. Also verify the temperature suffix against the application's ambient range. For production migration, compile with the exact replacement's support library and repeat timing, ADC, reset, and in-circuit programming tests.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The Microchip product and distributor pages do not state the requested compliance classifications. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status for the exact ordering code before production release.

Данные проверены: 2026-11-19 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

pic16f77 datasheet PIC16F77T-E/ML datasheet PIC16F77T-E/ML pinout PIC16F77T-E/ML datasheet pdf PIC16F77T-E/ML equivalent PIC16F77T-E/ML replacement PIC16F77T-E/ML cross reference PIC16F77T-E/ML footprint PIC16F77T-E/ML schematic PIC16F77T-E/ML price PIC16F77T-E/ML stock PIC16F77T-E/ML vs PIC16F77T-I/ML

Связанные компоненты & термины

Microchip Technology PIC16F77T-E/ML PIC16F77T-I/ML PIC16F77-E/ML PIC16F77-I/ML PIC16F777-E/ML PIC16F707-I/ML PIC16 MCU 8-bit microcontroller embedded microcontroller RISC architecture CMOS Flash memory 14KB program memory 368-byte RAM 20MHz maximum speed 8-bit analog-to-digital converter external oscillator 44-pin VQFN exposed-pad package surface-mount package industrial automation data acquisition motor control interface thermal management pin-and-code compatibility
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ