PIC16F77T-E/ML - 8-Bit 20MHz 14KB Flash MCU | Microchip
MPN: PIC16F77T-E/ML ✓ NakahandaPIC16F77T-E/ML Ulas
A PIC16 microcontroller is a compact RISC-based embedded controller that combines a CPU core, Flash program memory, data RAM, I/O ports, timers, and analog peripherals on one semiconductor die. PIC16F77 devices belong to the PIC16 family hierarchy: PIC16 MCU, 8-bit microcontroller, embedded microcontroller, and general-purpose semiconductor. The PIC16F77 is suitable when a design needs more I/O and program memory than smaller 28-pin members while retaining a mature, widely supported programming architecture.
Key specifications include 14KB of Flash memory organized as 8K x 14 words, 368 x 8 bits of RAM, 33 available I/O lines, and 20MHz operation. The manufacturer describes a 200ns instruction execution capability and an instruction set containing 35 single-word instructions. The -E device grade is intended for extended-temperature operation, while the T suffix identifies the tape-and-reel shipping configuration.
The integrated analog and digital resources allow the PIC16F77T-E/ML to serve as a central controller for industrial equipment, measurement systems, data acquisition, motor-control interfaces, display systems, and connected embedded products. Its Flash memory supports in-system reprogramming and field updates, while the exposed thermal pad helps remove heat from the device when the PCB provides adequate copper area.
The external oscillator requirement means the board must provide a suitable clock source and associated decoupling. The 44-pin VQFN exposed-pad package also demands careful land-pattern and thermal design. Keep the exposed pad connected to the intended ground or power plane according to the manufacturer pinout, and follow the package drawing and PCB guidelines for soldering, vias, and copper spreading.
This page combines the manufacturer architecture information, package and memory characteristics, application guidance, and engineering-focused replacement considerations. For procurement, use the Request a Quote form on this page to request current pricing, stock, lead time, and manufacturer-approved supply information for the exact 44-VQFN exposed-pad ordering code.
Mga alternatibo na pwedeng ilagay na PIC16F77T-E/ML — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok PIC16F77T-E/ML (parehas na form factor at footprint) — pagkakaiba sa Package, RAM, ADC Channels, Core Architecture, Operating Temperature Range.
PIC16F77T-I/ML
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →PIC16F77-E/ML
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →PIC16F77-I/ML
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →PIC16F777-E/ML
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →PIC16F707-I/ML
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →PIC16F77T-E/ML Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | 8-bit CMOS Flash PIC microcontroller |
| Program Memory Size | 14KB (8K x 14 words) |
| RAM Size | 368 x 8 bits |
| Number of I/O Pins | 33 |
| Maximum Speed | 20MHz |
| Volte ng Pagbibigay | 5V |
| Oscillator Type | External |
| Architecture | PIC RISC |
| Instruction Execution Time | 200ns |
| Single-Word Instructions | 35 |
| ADC Channels | 8 channels of 8-bit A/D converter |
| Packhaging | 44-pin VQFN exposed-pad package |
| Shipping Configuration | Tape and reel |
| Temperature Grade | Extended-temperature grade |
| Uri ng Pagpapasok | Surface mount |
Gabay sa Pin Configuration ng PIC16F77T-E/ML 44-pin vqfn exposed-pad package
Pin configuration para sa PIC16F77T-E/ML (44-pin vqfn exposed-pad package package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa PIC16F77T-E/ML.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
PIC16F77T-E/ML ay nararapat para sa 6 aplikasyons: Industrial Data Acquisition, Motor Control Interface, HVAC and Environmental Control, Appliance Control, LED Lighting Controller, Programmable Logic Controller.
Industrial Data Acquisition
PIC16F77T-E/ML fits industrial measurement systems that require an 8-bit A/D converter, 33 I/O lines, and 14KB of Flash program memory in one controller. The 20MHz maximum operating speed allows control software to sample inputs, apply calibration, and format results while leaving I/O available for sensors and actuators. Its external oscillator makes the timing plan predictable, while the extended-temperature grade supports industrial ambient conditions. Use an isolated analog front end, reference design, and appropriately decoupled supply rather than connecting noisy inputs directly to the controller.
Inirekomenda
Motor Control Interface
The PIC16F77T-E/ML can coordinate a stepper-motor or small DC-motor interface where firmware needs timers, numerous digital control signals, and local logic rather than a high-performance motor-control peripheral. Its 33 I/O lines allow encoder, limit-switch, driver-enable, and fault signals to be managed locally, while 14KB of Flash provides room for motion sequences. The 20MHz clock supports deterministic control loops, and the external oscillator allows the clock source to match system timing needs. Drive transistors and protection networks still require separate design.
Inirekomenda
HVAC and Environmental Control
PIC16F77T-E/ML is appropriate for temperature, humidity, airflow, and equipment-control panels where an embedded controller must combine analog inputs with relays, indicators, and communication interfaces. The 8-bit converter can process sensor channels after appropriate signal conditioning, while 33 I/O lines simplify panel wiring and provide capacity for status LEDs, switches, and actuator commands. The extended-temperature grade supports the stated industrial use case, and Flash permits configuration changes for different equipment families. Validate sensor accuracy, relay isolation, and EMC performance in the final enclosure.
Inirekomenda
Appliance Control
PIC16F77T-E/ML can serve as the central controller in an appliance or instrumentation product combining user inputs, displays, sensors, and powered outputs. Its 14KB Flash program memory supports a bootloader, operating-state logic, diagnostics, and configuration storage, while 368 bytes of RAM is suitable for compact working variables and communication buffers. The 20MHz device speed supports responsive control, and the 44-pin VQFN package reduces board area compared with larger leaded packages. Designers must observe exposed-pad soldering and thermal-copper requirements during assembly.
Inirekomenda
LED Lighting Controller
PIC16F77T-E/ML can control addressable or multiplexed LED systems where firmware coordinates multiple outputs, timing sequences, user commands, and fault monitoring. Its 33 I/O lines provide ample digital connectivity for LED data lines, mode controls, and interlocks, while the 20MHz clock supports precise timing of updates. The 8-bit converter can also supervise a current or temperature feedback signal after suitable conditioning. Use driver transistors rather than driving LED current directly from the microcontroller, and separate high-current switching paths to minimize noise and ground bounce.
Inirekomenda
Programmable Logic Controller
PIC16F77T-E/ML is suitable for a compact PLC-like control module that executes ladder-style logic or state-machine firmware across numerous digital inputs and outputs. The 8-bit core, 14KB Flash memory, 368 bytes of RAM, and 33 I/O lines provide enough resources for small machines, test fixtures, and equipment controllers. An external clock supports repeatable task scheduling, while the extended-temperature grade addresses industrial environments. Keep input protection, isolation, relay or transistor drive, and expansion interfaces outside the microcontroller so the control logic remains testable and serviceable.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for PIC16F77T-E/ML — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | PIC16F77T-I/ML | PIC16F77-E/ML | PIC16F77-I/ML | PIC16F777-E/ML | PIC16F707-I/ML |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-pin VQFN exposed-pad package | 44-pin VQFN exposed-pad package | 44-pin VQFN exposed-pad package | 44-pin VQFN exposed-pad package | 44-pin VQFN exposed-pad package | 44-pin VQFN exposed-pad package |
| CPU Architecture | 8-bit PIC RISC | 8-bit PIC RISC | 8-bit PIC RISC | 8-bit PIC RISC | 8-bit PIC RISC | 8-bit PIC RISC |
| Temperature Grade | Extended temperature | Industrial temperature | Extended temperature | Industrial temperature | Extended temperature | Industrial temperature |
Pangunahing mga Pagkakaiba
- Direct same-family temperature-grade alternative (kumpara saPIC16F77T-I/ML)
- Extended-temperature option with the same PIC16F77 resource set (kumpara saPIC16F77-I/ML)
- Identical core and package for manufacturing-format alternatives (kumpara saPIC16F77-E/ML)
Talaan ng Disenyo
Base the land pattern on the exact 44-pin VQFN exposed-pad drawing rather than a generic QFN footprint. Confirm pin-one orientation, pad length, exposed-pad dimensions, solder-mask clearance, and paste volume with the package qualification information. Provide the exposed pad with a continuous copper connection and an appropriate via pattern for thermal and electrical performance. A mismatch in exposed-pad geometry can create solder voids, weak joints, or inconsistent assembly yield.
Separate analog inputs, the A/D converter reference path, and external clock routing from switching outputs and high-current drivers. Keep the oscillator loop compact and away from switching nodes; route sensitive sensor inputs over a stable ground reference without crossing digital return-current paths. Place input protection and conditioning components close to their connector pins. These measures reduce conversion errors and oscillator jitter while preserving deterministic control behavior in industrial and appliance installations.
Design the supply network for the device's 5V operating requirement and place local bypass capacitance at the power pins with the shortest practical return path. Check the family documentation for the required capacitor value, voltage rating, and ESR limits; do not select a replacement solely by capacitance. Add supply filtering where noisy motors or switching converters share the board, and confirm that startup current, clock ramp, and brownout behavior do not create false resets.
A shared VQFN outline does not by itself prove that two MCUs are interchangeable. Verify every pin name, peripheral function, interrupt source, configuration-word behavior, and memory requirement before substituting PIC16F707 or PIC16F777 devices for PIC16F77T-E/ML. Also verify the temperature suffix against the application's ambient range. For production migration, compile with the exact replacement's support library and repeat timing, ADC, reset, and in-circuit programming tests.
Impormasyon ng Pagsunod sa Kautusan
The Microchip product and distributor pages do not state the requested compliance classifications. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status for the exact ordering code before production release.