PIC16F882-E/SP - 20MHz 8-Bit Flash MCU | Microchip
Артикул: PIC16F882-E/SP ✓ АктивенPIC16F882-E/SP Обзор
An 8-bit microcontroller is a compact processor designed for embedded control, measurement, timing, and communication tasks. The PIC16F882 belongs to the PIC16 mid-range family, combining a RISC-based PIC architecture with Flash program memory and a 35-instruction instruction set. This places the device in the broader hierarchy of embedded processor, microcontroller, semiconductor, and programmable-control-device categories.
Program memory is organized as 2K × 14 words, providing 3.5 KB of Flash storage for firmware. The device also includes 128 bytes of RAM for variables and 128 bytes of EEPROM for nonvolatile parameter storage. Self-programming supports applications that need field-updateable configuration or firmware, while the 25 available I/O pins support digital and analog functions in a compact 28-pin package.
The PIC16F882 operates from a 2.5 V, 3.3 V, or 5 V supply according to the family information and reaches a maximum instruction-clock frequency of 20 MHz. Its Flash-based architecture simplifies in-circuit programming and firmware revision compared with older ROM or OTP microcontroller designs. The manufacturer identifies the core as using only 35 single-word instructions, which can reduce program-memory pressure in straightforward control tasks.
Typical applications include industrial control panels, small sensor nodes, motor or relay controllers, building-control modules, automotive auxiliary controllers, and educational embedded-control boards. The combination of EEPROM, self-programming, multiple I/O pins, and a through-hole package is especially useful when firmware or calibration data must be retained and the board must tolerate conventional through-hole assembly and servicing.
PCB design should preserve access to the programming and reset functions while respecting the device’s supply and decoupling requirements. Place the supply capacitor close to VDD and VSS, route oscillator-sensitive signals carefully, and use the manufacturer pin-description table when assigning each multiplexed port function. The 28-pin PDIP footprint also requires adequate spacing for socketed or hand-soldered assemblies.
This product summary combines the manufacturer’s device information with engineering-focused memory, package, programming, replacement, and layout guidance. It is intended to help designers assess firmware capacity, timing, pin allocation, and board compatibility before selecting the automotive-grade PIC16F882-E/SP.
Аналоги без доработки для PIC16F882-E/SP — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC16F882-E/SP (тот же форм-фактор и посадочное место) — отличается по Package, Instruction Set, Microcontroller Type, Self-Programming, ADC.
PIC16F882-I/SP
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →PIC16F883-I/SP
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →PIC16F886-I/SP
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →PIC16F882-E/SP Максимальные параметры и электрические характеристики
| Microcontroller Type | 8-bit CMOS Flash microcontroller |
| Максимальная тактовая частота | 20 MHz |
| Program Memory | 3.5 KB Flash (2K × 14 words) |
| RAM | 128 bytes |
| EEPROM | 128 bytes |
| I/O Pins | 25 |
| Supply Voltage Options | 2.5 V, 3.3 V, or 5 V |
| Instruction Set | 35 single-word instructions |
| Architecture | PIC 8-bit RISC core |
| Program Memory Type | Flash, self-programmable |
| Корпус | 28-pin PDIP, 28-SPDIP |
| Package Row Pitch | 0.300 inch (7.62 mm) |
| Тип монтажа | Through-hole |
| Terminal Count | 28 terminals |
| Temperature Grade | Automotive grade |
Конфигурация выводов PIC16F882-E/SP
| Контакт 1 | RE3/MCLR/VPP — Digital input RE3, master clear or programming voltage pin |
| Контакт 2 | RA0/AN0 — RA0 digital I/O or analog input AN0 |
| Контакт 3 | RA1/AN1 — RA1 digital I/O or analog input AN1 |
| Контакт 4 | RA2/AN2/VREF- — RA2 digital I/O, analog input AN2, or negative reference |
| Контакт 5 | RA3/AN3/VREF+ — RA3 digital I/O, analog input AN3, or positive reference |
| Контакт 6 | RA4/T0CKI — RA4 digital I/O or Timer0 clock input |
| Контакт 7 | RA5/AN4/SS/C2OUT — RA5 digital I/O, analog input AN4, synchronous serial clock, or comparator output |
| Контакт 8 | VSS — Ground reference |
| Контакт 9 | RA7/OSC1/CLKIN — RA7 digital I/O, oscillator input, or external clock input |
| Контакт 10 | RA6/OSC2/CLKOUT — RA6 digital I/O, oscillator output, or clock output |
| Контакт 11 | RC0/T1OSO/T1CKI — RC0 digital I/O, Timer1 oscillator output, or Timer1 clock input |
| Контакт 12 | RC1/T1OSI/CCP2 — RC1 digital I/O, Timer1 oscillator input, or CCP2 output |
| Контакт 13 | RC2/P1A/CCP1 — RC2 digital I/O, PWM output, or CCP1 output |
| Контакт 14 | RC3/SCK/SCL — RC3 digital I/O, synchronous serial clock, or I2C clock |
| Контакт 15 | RC4/SDI/SDA — RC4 digital I/O, synchronous serial data input, or I2C data |
| Контакт 16 | RC5/SDO — RC5 digital I/O or synchronous serial data output |
| Контакт 17 | RC6/C6OUT — RC6 digital I/O or comparator output |
| Контакт 18 | RC7/C7OUT — RC7 digital I/O or comparator output |
| Контакт 19 | VSS — Ground reference |
| Контакт 20 | VDD — Positive supply voltage |
| Контакт 21 | RB0/INT/FLT/AN5 — RB0 digital I/O, external interrupt, fault input, or analog input AN5 |
| Контакт 22 | RB1/AN6 — RB1 digital I/O or analog input AN6 |
| Контакт 23 | RB2/AN7 — RB2 digital I/O or analog input AN7 |
| Контакт 24 | RB3/AN8/PGM/C1IN — RB3 digital I/O, analog input AN8, programming mode input, or comparator input |
| Контакт 25 | RB4/AN9 — RB4 digital I/O or analog input AN9 |
| Контакт 26 | RB5/AN10/PGM/C1OUT — RB5 digital I/O, analog input AN10, programming mode input, or comparator output |
| Контакт 27 | RB6/ICSPCLK — RB6 digital I/O or in-circuit serial programming clock |
| Контакт 28 | RB7/ICSPDAT — RB7 digital I/O or in-circuit serial programming data |
Типичное применение
PIC16F882-E/SP подходит для 6 применениеs: Automotive Auxiliary Control Module, Industrial Sensor Interface, Small Motor and Relay Controller, EEPROM Configuration Controller, Building Control and Relay Interface, Embedded Control Education Board.
Automotive Auxiliary Control Module
PIC16F882-E/SP fits an automotive auxiliary-control module that requires retained calibration data, event logging, and several digital inputs and outputs. The 20 MHz clock supports responsive control-loop and debouncing routines, while 3.5 KB of Flash provides room for application firmware and 128 bytes of EEPROM stores configuration that must survive power removal. Its 28-pin PDIP package simplifies through-hole assembly in serviceable control hardware. Because the MCU also exposes analog and timer functions on multiplexed pins, the circuit should use the manufacturer's pin table to reserve MCLR and programming access, add local supply decoupling, and verify every peripheral assignment against the vehicle interface specification.
Рекомендуется
Industrial Sensor Interface
The PIC16F882-E/SP is suitable for a compact industrial sensor interface that combines digital inputs, analog monitoring, local configuration, and serial data handling. Its 20 MHz processing rate supports responsive sampling and control tasks, while 3.5 KB of Flash holds the measurement, filtering, and communications firmware. The 128 bytes of RAM can support working variables, and the 128 bytes of EEPROM can preserve sensor offsets, calibration coefficients, or node identifiers. The 25 I/O pins reduce the need for external interface components. A robust implementation should isolate noisy field wiring, protect externally accessible inputs, and keep oscillator and communication traces away from switching-power nodes.
Рекомендуется
Small Motor and Relay Controller
PIC16F882-E/SP can serve as the controller in a small relay, solenoid, or low-power motor-control board where deterministic timing and retained settings are important. The 20 MHz clock allows timing references and state-machine updates to execute quickly, while the 25 I/O pins provide enough connections for control outputs, feedback inputs, and status indicators. Flash permits firmware revisions without replacing the MCU, and EEPROM can retain operating modes, calibration values, or cycle counters. Designers should use transistor or MOSFET drive stages rather than driving inductive loads directly, provide flyback protection, keep high-current switching paths separated from sensitive timing and programming traces, and validate thermal performance of the selected power stage.
Рекомендуется
EEPROM Configuration Controller
PIC16F882-E/SP is well suited to equipment requiring nonvolatile local configuration because it combines 128 bytes of EEPROM with a self-programming Flash architecture. The 3.5 KB program area can contain the configuration protocol, field-update handling, and application logic, while the 20 MHz clock supports responsive serial or parallel parameter transfer. The 128 bytes of RAM are sufficient for temporary buffers and integrity checks, and the 25 I/O pins can accommodate a status bus, buttons, indicators, and programming access. A production design should include a defined power-loss procedure, write-cycle budgeting, and checksum or redundant validation so that a failed EEPROM update does not place the equipment into an unsafe control state.
Рекомендуется
Building Control and Relay Interface
PIC16F882-E/SP can be applied to a building-control interface that coordinates inputs, outputs, timers, and stored operating schedules. Its 20 MHz clock supports responsive debouncing and state management, and the 25 I/O pins allow several field signals to be handled without a large expansion device. Nonvolatile EEPROM preserves schedules and configuration through a power interruption, while 3.5 KB of Flash provides sufficient space for compact application logic. The through-hole 28-pin PDIP package is useful for relay-oriented boards that benefit from mechanically robust assembly. The layout should maintain isolation between relay coils and logic, use suitable protection networks at external terminals, and route programming and oscillator signals away from relay-drive currents.
Рекомендуется
Embedded Control Education Board
PIC16F882-E/SP provides a straightforward platform for teaching embedded control because it combines a familiar 35-instruction PIC architecture, 3.5 KB of Flash, 128 bytes of RAM, EEPROM, 25 I/O pins, and a through-hole package. Students can exercise digital input/output, timers, analog functions, interrupts, serial communication, and self-programming without requiring a complex memory or package setup. The DIP format also allows the MCU to be inserted into a breadboard or socketed training board and replaced easily when experimenting. Instruction material should include a dedicated programming connector, clear labeling for MCLR and supply pins, local decoupling, and a stable oscillator arrangement so beginners can focus on firmware rather than troubleshooting the hardware.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC16F882-E/SP — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC16F882-I/SP | PIC16F883-I/SP | PIC16F886-I/SP |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-pin PDIP | 28-pin PDIP | 28-pin PDIP | 28-pin PDIP |
| CPU Architecture | 8-bit PIC RISC core | 8-bit PIC RISC core | 8-bit PIC RISC core | 8-bit PIC RISC core |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Flash Program Memory | 3.5 KB (2K × 14 words) | 3.5 KB | 3.5 KB | 3.5 KB |
| RAM | 128 bytes | 128 bytes | 128 bytes | 128 bytes |
| EEPROM | 128 bytes | 128 bytes | 128 bytes | 128 bytes |
| I/O Pins | 25 | 25 | 25 | 25 |
| Ordering Temperature Class | Automotive -E | Industrial -I | Industrial -I | Industrial -I |
Ключевые отличия
- Exact automotive-grade ordering option with Flash and EEPROM retention (против PIC16F882-I/SP)
- Matches the PIC16F883 headline memory and clock ratings without changing the PCB footprint (против PIC16F883-I/SP)
- Retains the same package and core resource levels as the PIC16F886 family member (против PIC16F886-I/SP)
Заметки по проектированию
Place the VDD bypass capacitor immediately between pin 20 and the nearby VSS connection rather than routing supply current through a long shared path. Follow the capacitor value and ESR guidance in Data Sheet 41291F for the selected 2.5 V, 3.3 V, or 5 V operating condition. Keep the programming connector and externally accessible interfaces away from switching nodes. The 20 MHz clock permits fast firmware execution, but power integrity still depends on low-loop decoupling and a quiet return path.
Preserve access to MCLR/VPP and the ICSP programming pins before assigning all multiplexed functions. The 28-pin PDIP footprint should use a standard 0.300 inch row spacing, adequate hole diameter for the selected lead and soldering process, and sufficient clearance around the socket or component body. When comparing a PIC16F883-I/SP or PIC16F886-I/SP substitution, review every analog, timer, comparator, and communication connection because family-member peripheral differences can affect a mechanically compatible replacement.
Keep oscillator and sensitive timing routes short, and do not route them parallel to relay-coil or power-converter current paths. Use a single defined ground strategy that returns digital switching currents close to their source pins. For designs using the EEPROM, include a controlled update sequence and data-integrity check in firmware, and account for a possible power interruption during a write. These practices protect both timing accuracy and stored configuration.
Информация о соответствии
The -E/SP suffix is identified as an automotive-grade ordering option, but the exact AEC-Q100 qualification statement and environmental compliance declarations were not established for this suffix and package. No compliance status is inferred.