Microchip Technology

PIC16F882-E/SP - 20MHz 8-Bit Flash MCU | Microchip

MPN: PIC16F882-E/SP ✓ 啟用中
2.5 V, 3.3 V, or 5 V Vdss 28-pin PDIP, 28-SPDIP Package 20 MHz Speed 3.5 KB Flash (2K × 14 words) Memory
MOQ: 1 |

PIC16F882-E/SP 概覽

The Microchip Technology PIC16F882-E/SP is a 20 MHz, 8-bit CMOS Flash microcontroller with 3.5 KB of program Flash, 128 bytes of RAM, 128 bytes of EEPROM, and 25 I/O pins in a 28-pin PDIP package. Its -E/SP designation identifies the automotive-grade, through-hole variant.

An 8-bit microcontroller is a compact processor designed for embedded control, measurement, timing, and communication tasks. The PIC16F882 belongs to the PIC16 mid-range family, combining a RISC-based PIC architecture with Flash program memory and a 35-instruction instruction set. This places the device in the broader hierarchy of embedded processor, microcontroller, semiconductor, and programmable-control-device categories.

Program memory is organized as 2K × 14 words, providing 3.5 KB of Flash storage for firmware. The device also includes 128 bytes of RAM for variables and 128 bytes of EEPROM for nonvolatile parameter storage. Self-programming supports applications that need field-updateable configuration or firmware, while the 25 available I/O pins support digital and analog functions in a compact 28-pin package.

The PIC16F882 operates from a 2.5 V, 3.3 V, or 5 V supply according to the family information and reaches a maximum instruction-clock frequency of 20 MHz. Its Flash-based architecture simplifies in-circuit programming and firmware revision compared with older ROM or OTP microcontroller designs. The manufacturer identifies the core as using only 35 single-word instructions, which can reduce program-memory pressure in straightforward control tasks.

Typical applications include industrial control panels, small sensor nodes, motor or relay controllers, building-control modules, automotive auxiliary controllers, and educational embedded-control boards. The combination of EEPROM, self-programming, multiple I/O pins, and a through-hole package is especially useful when firmware or calibration data must be retained and the board must tolerate conventional through-hole assembly and servicing.

PCB design should preserve access to the programming and reset functions while respecting the device’s supply and decoupling requirements. Place the supply capacitor close to VDD and VSS, route oscillator-sensitive signals carefully, and use the manufacturer pin-description table when assigning each multiplexed port function. The 28-pin PDIP footprint also requires adequate spacing for socketed or hand-soldered assemblies.

This product summary combines the manufacturer’s device information with engineering-focused memory, package, programming, replacement, and layout guidance. It is intended to help designers assess firmware capacity, timing, pin allocation, and board compatibility before selecting the automotive-grade PIC16F882-E/SP.

直接替換替代品,適用於 PIC16F882-E/SP — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: PIC16F882-E/SP (相同外形與佔位) — 差異在於 Package, Instruction Set, Microcontroller Type, Self-Programming, ADC.

Microchip Technology
Package: 28-pin SPDIP (Skinny Plastic DIP)
Instruction Set: 35 single-word instructions, 14-bit instruction width
ADC: 8-bit, up to 11 channels
Microchip Technology
Package: 28-pin SPDIP (Skinny Plastic DIP, through-hole)
Self-Programming: Yes (in-field flash updates)
ADC: 10-bit, up to 11 channels
Microchip Technology
Package: 28-pin SPDIP
Microcontroller Type: 8-bit CMOS flash-based PIC microcontroller
Self-Programming: Supported
Microchip Technology
Package: 28-pin SPDIP
Self-Programming: Supported

PIC16F882-I/SP

✅ 直接替換 ⚠️ 規格未經驗證
Microchip Technology
📦 28-pin PDIP
PIC16F (8-bit RISC, 14-bit instruction word) · 20 MHz · 35 single-word instructions · 3.5 KB (2K x 14) · 128 bytes · 128 bytes · 25 · 10-bit, up to 11 channels

聯絡詢價

查看資料表 →

PIC16F883-I/SP

✅ 直接替換 ⚠️ 規格未經驗證
Microchip Technology
📦 28-pin PDIP
8-bit CMOS flash-based PIC microcontroller · 20 MHz · 7 KB (4K x 14 words) · 256 bytes · 256 bytes · 25 · 2 · 35 single-word instructions

聯絡詢價

查看資料表 →

PIC16F886-I/SP

✅ 直接替換 ⚠️ 規格未經驗證
Microchip Technology
📦 28-pin PDIP
8-bit CMOS Flash microcontroller · 20 MHz · 14 KB (8K x 14 words) Flash · 368 bytes · 256 bytes (256 x 8 bits) · 35 single-word instructions · 24 pins · 10 bits

聯絡詢價

查看資料表 →

PIC16F882-E/SP 最大額定值與電氣特性

Microcontroller Type 8-bit CMOS Flash microcontroller
最大時脈頻率 20 MHz
Program Memory 3.5 KB Flash (2K × 14 words)
RAM 128 bytes
EEPROM 128 bytes
I/O Pins 25
Supply Voltage Options 2.5 V, 3.3 V, or 5 V
Instruction Set 35 single-word instructions
Architecture PIC 8-bit RISC core
Program Memory Type Flash, self-programmable
封裝 28-pin PDIP, 28-SPDIP
Package Row Pitch 0.300 inch (7.62 mm)
安裝類型 Through-hole
Terminal Count 28 terminals
Temperature Grade Automotive grade

PIC16F882-E/SP 腳位配置

DIP-28 Package Pinout Diagram DIP-28 28-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 28 2 27 3 26 4 25 5 24 6 23 7 22 8 21 9 20 10 19 11 18 12 17 13 16 14 15 DIP-28
腳位 1 RE3/MCLR/VPP — Digital input RE3, master clear or programming voltage pin
腳位 2 RA0/AN0 — RA0 digital I/O or analog input AN0
腳位 3 RA1/AN1 — RA1 digital I/O or analog input AN1
腳位 4 RA2/AN2/VREF- — RA2 digital I/O, analog input AN2, or negative reference
腳位 5 RA3/AN3/VREF+ — RA3 digital I/O, analog input AN3, or positive reference
腳位 6 RA4/T0CKI — RA4 digital I/O or Timer0 clock input
腳位 7 RA5/AN4/SS/C2OUT — RA5 digital I/O, analog input AN4, synchronous serial clock, or comparator output
腳位 8 VSS — Ground reference
腳位 9 RA7/OSC1/CLKIN — RA7 digital I/O, oscillator input, or external clock input
腳位 10 RA6/OSC2/CLKOUT — RA6 digital I/O, oscillator output, or clock output
腳位 11 RC0/T1OSO/T1CKI — RC0 digital I/O, Timer1 oscillator output, or Timer1 clock input
腳位 12 RC1/T1OSI/CCP2 — RC1 digital I/O, Timer1 oscillator input, or CCP2 output
腳位 13 RC2/P1A/CCP1 — RC2 digital I/O, PWM output, or CCP1 output
腳位 14 RC3/SCK/SCL — RC3 digital I/O, synchronous serial clock, or I2C clock
腳位 15 RC4/SDI/SDA — RC4 digital I/O, synchronous serial data input, or I2C data
腳位 16 RC5/SDO — RC5 digital I/O or synchronous serial data output
腳位 17 RC6/C6OUT — RC6 digital I/O or comparator output
腳位 18 RC7/C7OUT — RC7 digital I/O or comparator output
腳位 19 VSS — Ground reference
腳位 20 VDD — Positive supply voltage
腳位 21 RB0/INT/FLT/AN5 — RB0 digital I/O, external interrupt, fault input, or analog input AN5
腳位 22 RB1/AN6 — RB1 digital I/O or analog input AN6
腳位 23 RB2/AN7 — RB2 digital I/O or analog input AN7
腳位 24 RB3/AN8/PGM/C1IN — RB3 digital I/O, analog input AN8, programming mode input, or comparator input
腳位 25 RB4/AN9 — RB4 digital I/O or analog input AN9
腳位 26 RB5/AN10/PGM/C1OUT — RB5 digital I/O, analog input AN10, programming mode input, or comparator output
腳位 27 RB6/ICSPCLK — RB6 digital I/O or in-circuit serial programming clock
腳位 28 RB7/ICSPDAT — RB7 digital I/O or in-circuit serial programming data

典型應用

PIC16F882-E/SP 適用於 6 應用s: Automotive Auxiliary Control Module, Industrial Sensor Interface, Small Motor and Relay Controller, EEPROM Configuration Controller, Building Control and Relay Interface, Embedded Control Education Board.

🚗

Automotive Auxiliary Control Module

PIC16F882-E/SP fits an automotive auxiliary-control module that requires retained calibration data, event logging, and several digital inputs and outputs. The 20 MHz clock supports responsive control-loop and debouncing routines, while 3.5 KB of Flash provides room for application firmware and 128 bytes of EEPROM stores configuration that must survive power removal. Its 28-pin PDIP package simplifies through-hole assembly in serviceable control hardware. Because the MCU also exposes analog and timer functions on multiplexed pins, the circuit should use the manufacturer's pin table to reserve MCLR and programming access, add local supply decoupling, and verify every peripheral assignment against the vehicle interface specification.

🏭

Industrial Sensor Interface

The PIC16F882-E/SP is suitable for a compact industrial sensor interface that combines digital inputs, analog monitoring, local configuration, and serial data handling. Its 20 MHz processing rate supports responsive sampling and control tasks, while 3.5 KB of Flash holds the measurement, filtering, and communications firmware. The 128 bytes of RAM can support working variables, and the 128 bytes of EEPROM can preserve sensor offsets, calibration coefficients, or node identifiers. The 25 I/O pins reduce the need for external interface components. A robust implementation should isolate noisy field wiring, protect externally accessible inputs, and keep oscillator and communication traces away from switching-power nodes.

🔧

Small Motor and Relay Controller

PIC16F882-E/SP can serve as the controller in a small relay, solenoid, or low-power motor-control board where deterministic timing and retained settings are important. The 20 MHz clock allows timing references and state-machine updates to execute quickly, while the 25 I/O pins provide enough connections for control outputs, feedback inputs, and status indicators. Flash permits firmware revisions without replacing the MCU, and EEPROM can retain operating modes, calibration values, or cycle counters. Designers should use transistor or MOSFET drive stages rather than driving inductive loads directly, provide flyback protection, keep high-current switching paths separated from sensitive timing and programming traces, and validate thermal performance of the selected power stage.

💾

EEPROM Configuration Controller

PIC16F882-E/SP is well suited to equipment requiring nonvolatile local configuration because it combines 128 bytes of EEPROM with a self-programming Flash architecture. The 3.5 KB program area can contain the configuration protocol, field-update handling, and application logic, while the 20 MHz clock supports responsive serial or parallel parameter transfer. The 128 bytes of RAM are sufficient for temporary buffers and integrity checks, and the 25 I/O pins can accommodate a status bus, buttons, indicators, and programming access. A production design should include a defined power-loss procedure, write-cycle budgeting, and checksum or redundant validation so that a failed EEPROM update does not place the equipment into an unsafe control state.

🏠

Building Control and Relay Interface

PIC16F882-E/SP can be applied to a building-control interface that coordinates inputs, outputs, timers, and stored operating schedules. Its 20 MHz clock supports responsive debouncing and state management, and the 25 I/O pins allow several field signals to be handled without a large expansion device. Nonvolatile EEPROM preserves schedules and configuration through a power interruption, while 3.5 KB of Flash provides sufficient space for compact application logic. The through-hole 28-pin PDIP package is useful for relay-oriented boards that benefit from mechanically robust assembly. The layout should maintain isolation between relay coils and logic, use suitable protection networks at external terminals, and route programming and oscillator signals away from relay-drive currents.

🧩

Embedded Control Education Board

PIC16F882-E/SP provides a straightforward platform for teaching embedded control because it combines a familiar 35-instruction PIC architecture, 3.5 KB of Flash, 128 bytes of RAM, EEPROM, 25 I/O pins, and a through-hole package. Students can exercise digital input/output, timers, analog functions, interrupts, serial communication, and self-programming without requiring a complex memory or package setup. The DIP format also allows the MCU to be inserted into a breadboard or socketed training board and replaced easily when experimenting. Instruction material should include a dedicated programming connector, clear labeling for MCLR and supply pins, local decoupling, and a stable oscillator arrangement so beginners can focus on firmware rather than troubleshooting the hardware.

Where to buy PIC16F882-E/SP online?
PIC16F882-E/SP can be requested through the Request a Quote form on this page. The exact ordering code is PIC16F882-E/SP, which identifies the Microchip 28-pin PDIP device with automotive-grade temperature classification. Buyers should request the current inventory position, minimum order quantity, packaging quantity, and delivery schedule when preparing a production order. The part is also offered in molded-tube packaging under the SP ordering code, so the requested ship configuration should be stated clearly.
What is the price of PIC16F882-E/SP?
Use the Request a Quote form on this page for the current unit price and quantity breaks for PIC16F882-E/SP. The component is a standard catalog microcontroller with 3.5 KB of Flash, 128 bytes of RAM, 128 bytes of EEPROM, and a 20 MHz maximum clock. Pricing can vary with order quantity, packaging, and current inventory, so a quotation tied to the exact MPN is more useful than a historical catalog figure.
What is the lead time for PIC16F882-E/SP?
The current lead time for PIC16F882-E/SP should be confirmed through the Request a Quote form on this page. When requesting a quotation, specify the required quantity, ship configuration, target delivery date, and whether the design requires the automotive-grade -E/SP ordering code. This device is listed in a 28-pin PDIP package and is intended for through-hole assembly, so tooling and replacement schedules may depend on the authorized supply channel selected for the order.
Is PIC16F882-E/SP in stock?
Submit a stock and delivery request through the Request a Quote form on this page for PIC16F882-E/SP. The form should state the quantity, tube quantity or other desired ship configuration, and the required arrival date. Current inventory can change independently of product lifecycle status, so engineers should not infer availability from the existence of a product page. For new production commitments, request dated confirmation that covers the complete quantity required by the build schedule.
What are the key specifications of PIC16F882-E/SP that engineers should know?
PIC16F882-E/SP combines a 20 MHz maximum clock, 3.5 KB of Flash program memory, 128 bytes of RAM, 128 bytes of EEPROM, and 25 I/O pins in a 28-pin PDIP package. According to the Microchip PIC16F882/883/884/886/887 Data Sheet 41291F, the device uses a 35-instruction, 8-bit PIC architecture and supports self-programming. These figures determine firmware capacity, runtime-data requirements, I/O availability, and whether the board can be serviced through conventional through-hole assembly.
PIC16F882-E/SP vs PIC16F882-I/SP - which is better?
PIC16F882-E/SP is the automotive-grade ordering option, while PIC16F882-I/SP is the industrial-grade ordering option; both retain the 20 MHz clock, 3.5 KB Flash, 128 bytes of RAM, and 28-pin PDIP electrical arrangement. Choose PIC16F882-E/SP when the end product requires the automotive-grade ordering class or an exact approved BOM entry. Choose PIC16F882-I/SP when the application requires industrial classification and the project specification permits it. Confirm the complete manufacturer ordering table for the required temperature limits.
PIC16F882-E/SP vs PIC16F883-I/SP - can the PIC16F883 replace it?
PIC16F883-I/SP is a same-family, 28-pin PDIP alternative with a matching 20 MHz clock, 3.5 KB Flash, 128 bytes of RAM, 128 bytes of EEPROM, and 25 I/O pins. However, the two devices belong to different members of the PIC16F882/883/886 family and their peripheral assignments are not guaranteed to be functionally identical. Use it as a drop-in candidate only after checking every connected peripheral, interrupt source, and pin multiplexing requirement against the manufacturer data sheet and your production qualification process.
What can replace PIC16F882-E/SP?
PIC16F882-I/SP is the closest same-package ordering alternative because it preserves the PIC16F882 function set, 20 MHz clock, 3.5 KB Flash, 128 bytes of RAM, and 28-pin PDIP footprint while changing the temperature-grade ordering class. PIC16F883-I/SP and PIC16F886-I/SP are additional same-family candidates, but their peripheral differences require application-specific verification. No verified cross-brand drop-in replacement was identified for this exact automotive-grade ordering code.
What is the best Microchip equivalent for PIC16F882-E/SP?
PIC16F882-I/SP is the closest Microchip ordering equivalent for an industrial-grade design because it retains the PIC16F882 core, 20 MHz clock, 3.5 KB Flash, 128 bytes of RAM, and 28-pin PDIP footprint. PIC16F883-I/SP and PIC16F886-I/SP share the 28-pin package and major memory figures but are different family members with differing peripheral arrangements. The final substitution must be approved against the exact pin-multiplexing, interrupt, analog, and communication requirements of the target design.
When should I choose PIC16F882-E/SP over a PIC16F883-I/SP replacement?
Choose PIC16F882-E/SP when the approved BOM requires the automotive-grade -E/SP ordering code or when the target product must retain the exact PIC16F882 peripheral configuration. Although PIC16F883-I/SP matches the major headline ratings and 28-pin PDIP package, a family-member substitution can change ADC, timer, comparator, or communication behavior. The safer choice is PIC16F882-E/SP when long-term firmware maintenance, qualification records, or second-source equivalence make exact device continuity more important than flexibility.
Is PIC16F882-E/SP suitable for automotive auxiliary control modules?
PIC16F882-E/SP is suitable for automotive auxiliary control applications that require an 8-bit microcontroller, 20 MHz maximum clock, Flash memory, EEPROM, and a through-hole package. Its -E ordering code is associated with automotive-grade classification. According to the Microchip PIC16F882/883/884/886/887 Data Sheet 41291F, the device provides self-programming and 128 bytes of EEPROM for retained configuration. Vehicle-specific requirements, including transient immunity and qualification documentation, must still be verified for the finished electronic control unit.
Where to download the PIC16F882-E/SP datasheet PDF?
The authoritative PIC16F882-E/SP documentation is Microchip's PIC16F882/883/884/886/887 Data Sheet 41291F, available at https://ww1.microchip.com/downloads/en/DeviceDoc/41291F.pdf. It covers the 28-pin PDIP configuration, memory organization, electrical characteristics, peripheral operation, and package information. Use the device-specific ordering-information section to confirm how the -E/SP suffix relates to temperature grade and package shipping format.
Where can I find the PIC16F882 pinout?
The PIC16F882 pinout is shown in the Microchip PIC16F882/883/884/886/887 Data Sheet 41291F. For PIC16F882-E/SP, use the 28-pin PDIP diagram and the accompanying pin-description table, including multiplexed port, analog, timer, comparator, programming, power, and reset functions. The 28-pin package includes programming and ground/supply positions that should be assigned directly from the manufacturer table rather than inferred from another 28-pin device.
How is PIC16F882 programmed?
PIC16F882 uses Microchip's Flash-based programming interface, and the device supports self-programming according to the manufacturer product page. A compatible programmer and the appropriate programming adapter should connect to the device's programming pins, while MCLR and the supply rails must meet the requirements in Data Sheet 41291F. Because several port pins are multiplexed, reserve programming access and verify the boot or application state before committing the PCB layout.
What are the common design pitfalls when using PIC16F882-E/SP?
The most common design risks are assigning a multiplexed pin without checking its alternate function, omitting local supply decoupling, routing oscillator or programming signals poorly, and replacing the automotive-grade device without validating peripheral behavior. PIC16F882-E/SP provides 25 I/O pins, but not every pin supports every peripheral. Use the manufacturer pin-description table, place the VDD bypass capacitor close to the device, keep sensitive timing routes short, and validate any PIC16F883-I/SP or PIC16F886-I/SP substitution against the complete firmware requirements.

工程參考資料,適用於 PIC16F882-E/SP — 比較、設計指引及合規資訊。

選型指南

Choose PIC16F882-E/SP when the product specification requires the automotive-grade -E/SP ordering code, a 20 MHz 8-bit core, 3.5 KB of Flash, EEPROM retention, and a 28-pin through-hole footprint. It is the lowest-risk choice for maintaining the exact PIC16F882 peripheral behavior and qualification history. PIC16F882-I/SP is appropriate when the application can use industrial-grade ordering and exact device continuity is not required. PIC16F883-I/SP and PIC16F886-I/SP can reuse the same 28-pin PDIP footprint, but they are different family members; review pin multiplexing, interrupts, analog channels, timers, and communications before approving either as a functional replacement. No cross-brand drop-in substitute was verified, so changing processor architecture would require hardware and firmware redesign rather than a simple board-level substitution.

與替代品比較

參數 本產品 PIC16F882-I/SP PIC16F883-I/SP PIC16F886-I/SP
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 28-pin PDIP 28-pin PDIP 28-pin PDIP 28-pin PDIP
CPU Architecture 8-bit PIC RISC core 8-bit PIC RISC core 8-bit PIC RISC core 8-bit PIC RISC core
Maximum Clock Frequency 20 MHz 20 MHz 20 MHz 20 MHz
Flash Program Memory 3.5 KB (2K × 14 words) 3.5 KB 3.5 KB 3.5 KB
RAM 128 bytes 128 bytes 128 bytes 128 bytes
EEPROM 128 bytes 128 bytes 128 bytes 128 bytes
I/O Pins 25 25 25 25
Ordering Temperature Class Automotive -E Industrial -I Industrial -I Industrial -I

主要差異化特點

  • Exact automotive-grade ordering option with Flash and EEPROM retention (對比PIC16F882-I/SP)
  • Matches the PIC16F883 headline memory and clock ratings without changing the PCB footprint (對比PIC16F883-I/SP)
  • Retains the same package and core resource levels as the PIC16F886 family member (對比PIC16F886-I/SP)

設計說明

Place the VDD bypass capacitor immediately between pin 20 and the nearby VSS connection rather than routing supply current through a long shared path. Follow the capacitor value and ESR guidance in Data Sheet 41291F for the selected 2.5 V, 3.3 V, or 5 V operating condition. Keep the programming connector and externally accessible interfaces away from switching nodes. The 20 MHz clock permits fast firmware execution, but power integrity still depends on low-loop decoupling and a quiet return path.

Preserve access to MCLR/VPP and the ICSP programming pins before assigning all multiplexed functions. The 28-pin PDIP footprint should use a standard 0.300 inch row spacing, adequate hole diameter for the selected lead and soldering process, and sufficient clearance around the socket or component body. When comparing a PIC16F883-I/SP or PIC16F886-I/SP substitution, review every analog, timer, comparator, and communication connection because family-member peripheral differences can affect a mechanically compatible replacement.

Keep oscillator and sensitive timing routes short, and do not route them parallel to relay-coil or power-converter current paths. Use a single defined ground strategy that returns digital switching currents close to their source pins. For designs using the EEPROM, include a controlled update sequence and data-integrity check in firmware, and account for a possible power interruption during a write. These practices protect both timing accuracy and stored configuration.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The -E/SP suffix is identified as an automotive-grade ordering option, but the exact AEC-Q100 qualification statement and environmental compliance declarations were not established for this suffix and package. No compliance status is inferred.

相關搜尋

pic16f882 datasheet pic16f882 pinout pic16f882 programming pic16f882 pdf pic16f882 datasheet pdf PIC16F882-E/SP datasheet PIC16F882-E/SP pinout PIC16F882-E/SP equivalent PIC16F882-E/SP replacement PIC16F882-E/SP vs PIC16F882-I/SP PIC16F882-E/SP price PIC16F882-E/SP 28-pin PDIP

相關元件與詞彙

Microchip Technology PIC16F882-E/SP PIC16F882 PIC16F882-I/SP PIC16F883-I/SP PIC16F886-I/SP PIC16 mid-range product family 8-bit microcontroller CMOS Flash microcontroller RISC architecture PIC architecture Flash program memory EEPROM RAM 20 MHz clock 3.5 KB program memory 128-byte RAM 128-byte EEPROM 25 I/O pins 28-pin PDIP SP package suffix self-programming MCLR ICSP automotive-grade ordering option
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情