PIC17C756A-33/L - 33MHz 8-Bit OTP MCU, 32KB, 50 I/O | Microchip
Артикул: PIC17C756A-33/L ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $16.54 | $16,54 |
| 10 | $14.88 | $148,80 |
| 100 | $12.95 | $1.295,00 |
| 500 | $10.85 | $5.425,00 |
| 1.000 | $9.45 | $9.450,00 |
PIC17C756A-33/L Обзор
A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (program + RAM), and programmable peripherals onto one silicon die. The PIC17C family sits within the legacy OTP-ROM 8-bit MCU tier of Microchip's product tree: MCU -> 8-bit microcontroller -> PIC -> PIC17C -> high-performance segment. Unlike flash-based PIC18F successors, PIC17C devices use EPROM/OTP program memory, which makes them suited for mature, low-cost, moderate-volume embedded products where firmware is finalized at production.
Key features include 58 single-word instructions for compact code, an 8 x 8 single-cycle hardware multiplier, brown-out reset, a watchdog timer, and an extended instruction set. Supply voltage is 4.5 V to 5.5 V (5 V nominal), and the OTP program memory allows one-time factory or prototyping programming. The 68-pin PLCC J-leaded package offers socket-upgradeable serviceability for industrial and legacy systems.
Typical applications include industrial control panels, motor control nodes, instrumentation front-ends, and embedded control boards that were originally designed around the PIC17C platform. When designing in this part, note that PIC17C756A is a mature OTP device; new designs should evaluate PIC18F6520 or PIC18F8720 as flash-based drop-in or near-drop-in successors per Microchip migration guidance.
Аналоги без доработки для PIC17C756A-33/L — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC17C756A-33/L (тот же форм-фактор и посадочное место) — отличается по Mounting Type, Package, Program Memory Type, Core Architecture, Maximum Clock Frequency.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC17C756A-33I/L
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC17C756A-33/P
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC17C756AT-33/L
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC17C756AT-33I/L
✅ Прямая замена✓ В наличии
$12.4 / шт.
Открыть даташит →PIC17C756A-16I/L
✅ Прямая замена✓ В наличии
$13.85 / шт.
Открыть даташит →PIC17C756A-33/L Максимальные параметры и электрические характеристики
| Core Architecture | PIC17C (8-bit RISC) |
| Program Memory Type | OTP (One-Time Programmable EPROM) |
| Program Memory Size | 32 KB (16K x 16) |
| Data RAM | 902 bytes |
| Максимальная тактовая частота | 33 MHz |
| Instruction Cycle | 121 ns (8.25 MIPS) |
| Instruction Set Size | 58 single-word instructions |
| Hardware Multiplier | 8 x 8 single-cycle |
| I/O Pins | 50 |
| ADC | 12 channels x 10-bit |
| PWM Outputs | 3 |
| Capture Inputs | 4 |
| Timers | Multiple 8/16-bit timers |
| Serial Interfaces | 1x SPI / I2C (SSP) + 2x USART |
| Напряжение питания | 4.5 V to 5.5 V |
| Корпус | 68-pin PLCC (24.23 x 24.23 mm) |
| Тип монтажа | Surface Mount |
| Рабочая температура | 0C to +70C (commercial) |
Конфигурация выводов PIC17C756A-33/L
| Контакт 1 | MCLR — Master Clear (reset) input |
| Контакт 2 | RA0/AN0 — PORTA bit 0 / analog input 0 |
| Контакт 3 | RA1/AN1 — PORTA bit 1 / analog input 1 |
| Контакт 4 | RA2/AN2 — PORTA bit 2 / analog input 2 |
| Контакт 5 | RA3/AN3/VREF+ — PORTA bit 3 / analog input 3 / VREF+ |
| Контакт 6 | RA4/AN4 — PORTA bit 4 / analog input 4 |
| Контакт 7 | RA5/AN5 — PORTA bit 5 / analog input 5 |
| Контакт 8 | VSS — Ground |
| Контакт 9 | OSC1/CLKIN — Oscillator input / external clock |
| Контакт 10 | OSC2/CLKOUT — Oscillator output / clock out |
| Контакт 11 | VSS — Ground |
| Контакт 12 | RC0 — PORTC bit 0 |
| Контакт 13 | RC1 — PORTC bit 1 |
| Контакт 14 | RC2 — PORTC bit 2 |
| Контакт 15 | RC3 — PORTC bit 3 |
| Контакт 16 | RC4 — PORTC bit 4 |
| Контакт 17 | RC5 — PORTC bit 5 |
| Контакт 18 | RC6 — PORTC bit 6 |
| Контакт 19 | RC7 — PORTC bit 7 |
| Контакт 20 | VDD — Positive supply |
| Контакт 21 | VSS — Ground |
| Контакт 22 | RB0/INT0 — PORTB bit 0 / external interrupt 0 |
| Контакт 23 | RB1/INT1 — PORTB bit 1 / external interrupt 1 |
| Контакт 24 | RB2/INT2 — PORTB bit 2 / external interrupt 2 |
| Контакт 25 | RB3/INT3 — PORTB bit 3 / external interrupt 3 |
| Контакт 26 | RB4 — PORTB bit 4 |
| Контакт 27 | RB5 — PORTB bit 5 |
| Контакт 28 | RB6 — PORTB bit 6 |
| Контакт 29 | RB7 — PORTB bit 7 |
| Контакт 30 | VSS — Ground |
| Контакт 31 | VDD — Positive supply |
| Контакт 32 | [DATA_NEEDED: pin 32 name] — [DATA_NEEDED: pin 32 function - datasheet p.30262A] |
| Контакт 33 | [DATA_NEEDED: pin 33 name] — [DATA_NEEDED: pin 33 function - datasheet p.30262A] |
| Контакт 34 | [DATA_NEEDED: pin 34 name] — [DATA_NEEDED: pin 34 function - datasheet p.30262A] |
| Контакт 35 | [DATA_NEEDED: pin 35 name] — [DATA_NEEDED: pin 35 function - datasheet p.30262A] |
| Контакт 36 | [DATA_NEEDED: pin 36 name] — [DATA_NEEDED: pin 36 function - datasheet p.30262A] |
| Контакт 37 | [DATA_NEEDED: pin 37 name] — [DATA_NEEDED: pin 37 function - datasheet p.30262A] |
| Контакт 38 | [DATA_NEEDED: pin 38 name] — [DATA_NEEDED: pin 38 function - datasheet p.30262A] |
| Контакт 39 | [DATA_NEEDED: pin 39 name] — [DATA_NEEDED: pin 39 function - datasheet p.30262A] |
| Контакт 40 | [DATA_NEEDED: pin 40 name] — [DATA_NEEDED: pin 40 function - datasheet p.30262A] |
| Контакт 41 | [DATA_NEEDED: pin 41 name] — [DATA_NEEDED: pin 41 function - datasheet p.30262A] |
| Контакт 42 | [DATA_NEEDED: pin 42 name] — [DATA_NEEDED: pin 42 function - datasheet p.30262A] |
| Контакт 43 | [DATA_NEEDED: pin 43 name] — [DATA_NEEDED: pin 43 function - datasheet p.30262A] |
| Контакт 44 | [DATA_NEEDED: pin 44 name] — [DATA_NEEDED: pin 44 function - datasheet p.30262A] |
| Контакт 45 | [DATA_NEEDED: pin 45 name] — [DATA_NEEDED: pin 45 function - datasheet p.30262A] |
| Контакт 46 | [DATA_NEEDED: pin 46 name] — [DATA_NEEDED: pin 46 function - datasheet p.30262A] |
| Контакт 47 | [DATA_NEEDED: pin 47 name] — [DATA_NEEDED: pin 47 function - datasheet p.30262A] |
| Контакт 48 | [DATA_NEEDED: pin 48 name] — [DATA_NEEDED: pin 48 function - datasheet p.30262A] |
| Контакт 49 | [DATA_NEEDED: pin 49 name] — [DATA_NEEDED: pin 49 function - datasheet p.30262A] |
| Контакт 50 | [DATA_NEEDED: pin 50 name] — [DATA_NEEDED: pin 50 function - datasheet p.30262A] |
| Контакт 51 | [DATA_NEEDED: pin 51 name] — [DATA_NEEDED: pin 51 function - datasheet p.30262A] |
| Контакт 52 | [DATA_NEEDED: pin 52 name] — [DATA_NEEDED: pin 52 function - datasheet p.30262A] |
| Контакт 53 | [DATA_NEEDED: pin 53 name] — [DATA_NEEDED: pin 53 function - datasheet p.30262A] |
| Контакт 54 | [DATA_NEEDED: pin 54 name] — [DATA_NEEDED: pin 54 function - datasheet p.30262A] |
| Контакт 55 | [DATA_NEEDED: pin 55 name] — [DATA_NEEDED: pin 55 function - datasheet p.30262A] |
| Контакт 56 | [DATA_NEEDED: pin 56 name] — [DATA_NEEDED: pin 56 function - datasheet p.30262A] |
| Контакт 57 | [DATA_NEEDED: pin 57 name] — [DATA_NEEDED: pin 57 function - datasheet p.30262A] |
| Контакт 58 | [DATA_NEEDED: pin 58 name] — [DATA_NEEDED: pin 58 function - datasheet p.30262A] |
| Контакт 59 | [DATA_NEEDED: pin 59 name] — [DATA_NEEDED: pin 59 function - datasheet p.30262A] |
| Контакт 60 | [DATA_NEEDED: pin 60 name] — [DATA_NEEDED: pin 60 function - datasheet p.30262A] |
| Контакт 61 | [DATA_NEEDED: pin 61 name] — [DATA_NEEDED: pin 61 function - datasheet p.30262A] |
| Контакт 62 | [DATA_NEEDED: pin 62 name] — [DATA_NEEDED: pin 62 function - datasheet p.30262A] |
| Контакт 63 | [DATA_NEEDED: pin 63 name] — [DATA_NEEDED: pin 63 function - datasheet p.30262A] |
| Контакт 64 | [DATA_NEEDED: pin 64 name] — [DATA_NEEDED: pin 64 function - datasheet p.30262A] |
| Контакт 65 | [DATA_NEEDED: pin 65 name] — [DATA_NEEDED: pin 65 function - datasheet p.30262A] |
| Контакт 66 | [DATA_NEEDED: pin 66 name] — [DATA_NEEDED: pin 66 function - datasheet p.30262A] |
| Контакт 67 | [DATA_NEEDED: pin 67 name] — [DATA_NEEDED: pin 67 function - datasheet p.30262A] |
| Контакт 68 | [DATA_NEEDED: pin 68 name] — [DATA_NEEDED: pin 68 function - datasheet p.30262A] |
Типичное применение
PIC17C756A-33/L подходит для 6 применениеs: Industrial Control Panels, Motor Control Nodes, Instrumentation Front-Ends, Legacy Embedded Control Boards, Building Automation Controllers, Point-of-Sale Terminals.
Industrial Control Panels
The PIC17C756A-33/L fits industrial control panel designs where deterministic 8-bit processing, 50 I/O lines, and 12-channel 10-bit ADC are required for sensor aggregation and actuator control. Its 33 MHz clock delivers 8.25 MIPS, which is sufficient for sequential scanning of multiple analog inputs, debounced keypads, and PWM-driven motor or valve drivers. The 50 I/O directly drive 7-segment displays, optocouplers, and discrete indicators without external logic. The 902-byte RAM holds state machines for PLC ladder emulation, while the 32 KB OTP program memory accommodates fixed ladder-logic firmware at production programming. Compared with flash MCUs, the OTP cost advantage is meaningful for high-volume panel builds.
Рекомендуется
Motor Control Nodes
Motor control nodes benefit from the PIC17C756A-33/L's three PWM outputs and four capture inputs, which together support closed-loop DC motor or stepper control at the 33 MHz instruction rate. The 121 ns instruction cycle allows the firmware to execute PID loops at sub-millisecond periods while simultaneously sampling the 12-channel ADC for back-EMF, current, and temperature feedback. The 50 I/O lines interface to H-bridge drivers, optical encoders, and end-stop switches. Compared with newer dsPIC alternatives, this part remains preferred when cost dominates and the firmware is finalized - the OTP memory enforces a one-time-only programming model that suits mature motor-control products.
Рекомендуется
Instrumentation Front-Ends
Instrumentation front-ends rely on the PIC17C756A-33/L's 12-channel 10-bit ADC for digitizing thermocouple, strain-gauge, or process-voltage signals, while the 8.25 MIPS throughput handles linearization and averaging in real time. The 50 I/O lines interface to LCD character displays, keypad matrices, and RS-232/485 transceivers via the two onboard USARTs. The synchronous serial port configurable as SPI or I2C talks to external EEPROM, RTC, or sensor front-end chips. Compared with newer 12-bit ADC parts, the 10-bit resolution here is sufficient for many legacy instrumentation products where the firmware is locked into the OTP.
Рекомендуется
Legacy Embedded Control Boards
Legacy embedded control boards originally designed around the PIC17C platform benefit from the PIC17C756A-33/L because it preserves the same 68-pin PLCC footprint, instruction set, and peripheral register map as older PIC17C752/756 silicon. This means maintenance and warranty-replacement production can continue without PCB rework. The 33 MHz speed grade matches original timing budgets, while the 32 KB OTP memory holds the same legacy firmware binaries. Compared with migrating to PIC18F, which requires firmware recompilation and timing re-validation, the PIC17C756A-33/L is the lowest-risk lifecycle-extension option for installed bases running into the late 2020s.
Рекомендуется
Building Automation Controllers
Building automation controllers use the PIC17C756A-33/L to aggregate sensor inputs (temperature, humidity, occupancy) via the 12-channel ADC and drive HVAC actuators via the three PWM channels. The 50 I/O handle relay outputs, status LEDs, and isolated digital inputs from BACnet or Modbus links through the USARTs. The 8.25 MIPS throughput runs scheduling logic, while the 902-byte RAM holds scheduling tables and override flags. Compared with low-power PIC16LF parts, this PIC17C variant trades sleep-mode efficiency for raw throughput, which suits line-powered building controllers that are always on.
Рекомендуется
Point-of-Sale Terminals
Point-of-sale terminals use the PIC17C756A-33/L as a peripheral controller for keypad scanning, printer stepper control via PWM, and barcode-wand interface through the USART. The 50 I/O drive the LCD character display, status LEDs, and the cash-drawer pulse output. The 32 KB OTP memory holds fixed firmware for terminal models that do not require field updates. The 12-channel ADC is available for battery monitoring on portable terminals. Compared with newer ARM Cortex-M0 POS controllers, this 8-bit MCU remains useful in mature terminal designs where firmware stability and cost dominate upgrade decisions.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC17C756A-33/L — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC17C756A-33I/L | PIC17C756AT-33/L | PIC17C756AT-33I/L | PIC17C756A-16I/L |
|---|---|---|---|---|---|
| Package | 68-pin PLCC | 68-pin PLCC | 68-pin PLCC | 68-pin PLCC | 68-pin PLCC |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Maximum Clock Frequency | 33 MHz | 33 MHz | 33 MHz | 33 MHz | 16 MHz |
| Program Memory | 32 KB OTP | 32 KB OTP | 32 KB OTP | 32 KB OTP | 32 KB OTP |
| Data RAM | 902 bytes | 902 bytes | 902 bytes | 902 bytes | 902 bytes |
| Operating Temperature | 0C to +70C (commercial) | -40C to +85C (industrial) | 0C to +70C (commercial) | -40C to +85C (industrial) | -40C to +85C (industrial) |
| I/O Pins | 50 | 50 | 50 | 50 | 50 |
| ADC Channels x Resolution | 12 x 10-bit | 12 x 10-bit | 12 x 10-bit | 12 x 10-bit | 12 x 10-bit |
| Supply Voltage | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Lifecycle Status | NRND | NRND | NRND | NRND | NRND |
Ключевые отличия
- Highest speed grade of the PIC17C756A OTP family (против PIC17C756A-16I/L)
- Commercial temperature grade at lowest cost tier (против PIC17C756A-33I/L)
- Same 68-pin PLCC footprint across speed and temperature variants (против PIC17C756A-33/P)
Заметки по проектированию
The PIC17C756A-33/L operates from a single 4.5 V to 5.5 V supply. Decouple VDD with a 100 nF ceramic capacitor placed within 5 mm of each VDD pin (the part has multiple VDD pins: 20, 31 and others). Bulk decoupling of 10 uF tantalum or aluminum on the supply rail reduces switching transients from the 50 I/O lines. Brown-out reset is internal; tie MCLR through a 10 kohm pull-up to VDD to avoid spurious resets. Estimated: total quiescent current is approximately 5-15 mA at 33 MHz depending on peripheral activity.
The 68-pin PLCC socket allows field replacement and programming socket adapters. For new designs, prefer through-hole PLCC sockets rated for at least 100 insertion cycles. Keep analog traces (AN0-AN11, VREF) short and away from digital switching lines to preserve ADC accuracy at 10-bit resolution. Place the 33 MHz crystal or resonator close to OSC1/OSC2 with grounded guard traces to reduce EMI. Estimated: 33 MHz fundamental-mode crystal with 22 pF load capacitors is the typical reference circuit.
OTP memory cannot be erased or rewritten - any code bug in production becomes a hardware rework. Use a PIC18F or PIC17C development socket for firmware validation before committing to OTP programming. The -33 speed grade designation is mandatory: do not substitute -16 or -25 speed grades in designs that require 33 MHz timing budgets, because instruction execution is halved. When migrating to PIC18F6520, verify peripheral register map differences - USART, ADC, and PWM control bits differ between PIC17C and PIC18F silicon. Watch for stack overflow if nested interrupts exceed the hardware stack depth of 16 levels on PIC17C756A.
Информация о соответствии
Compliance data not present in verified web data; datasheet 30262A does not contain an explicit compliance table in retrieved snippets. RoHS/REACH/lead-free status was not returned by DigiKey or Mouser product pages in the search results.
