PIC17C762-33/L - 8-Bit 33MHz OTP MCU 16KB 84-PLCC | Microchip
Артикул: PIC17C762-33/L ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $14.5 | $14,50 |
| 10 | $13.2 | $132,00 |
| 100 | $11.85 | $1.185,00 |
| 500 | $10.6 | $5.300,00 |
| 1.000 | $9.95 | $9.950,00 |
PIC17C762-33/L Обзор
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data RAM, and a rich set of peripherals (timers, ADC, communication ports, GPIO) onto one silicon die. The PIC17C family was Microchip's first high-end 8-bit architecture, positioned above the PIC16C midrange family by offering wider 16-bit instruction words, an expanded register set, an external memory interface, and higher pin counts for embedded applications requiring more I/O than midrange MCUs could deliver. OTP (One-Time Programmable) variants such as the PIC17C762 are intended for low-to-medium volume production where masked-ROM economics are not justified.
The PIC17C762-33/L offers 58 single-word instructions, a single-cycle hardware multiplier (8 x 8 in one instruction cycle), multiple interrupt sources, a USART, an MSSP (Master Synchronous Serial Port), and capture/compare/PWM modules. The 10-bit ADC is suitable for mixed-signal designs, and the 66 I/O lines support extensive parallel interfaces. Operating supply voltage is 4.5 V to 5.5 V, suitable for 5 V industrial and commercial environments.
Typical applications include industrial control systems, motor control front-ends, instrumentation, and legacy embedded designs originally migrated from PIC16C/PIC17C development. The wide PLCC-84 footprint and rich peripheral set made the PIC17C762 a frequent choice for printers, automotive body controllers, and process-control boards.
When designing with the PIC17C762-33/L, ensure in-circuit programming access (ICP) and consider that OTP memory cannot be erased, so production programming and verification must be rigorous. Use decoupling capacitors near each supply pin, and follow Microchip's PIC17C family reference design for oscillator layout and ADC analog routing.
This page synthesizes distributor pricing, current lifecycle status, same-package alternatives (PIC17C752T-33/L, PIC17C756A series), and practical design notes for engineers sourcing the PIC17C762-33/L, supplementing the manufacturer datasheet with selection guidance.
Аналоги без доработки для PIC17C762-33/L — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC17C762-33/L (тот же форм-фактор и посадочное место) — отличается по Package, Mounting Type, Program Memory Type, Core Architecture, Instruction Cycle Time.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC17C756A-33E/L
✅ Прямая замена✓ В наличии
$9.4 / шт.
Открыть даташит →PIC17C756AT-33E/L
✅ Прямая замена✓ В наличии
$10.4 / шт.
Открыть даташит →PIC17C756AT-33I/L
✅ Прямая замена✓ В наличии
$12.4 / шт.
Открыть даташит →PIC17C752T-33/L
✅ Прямая замена✓ В наличии
$14.2 / шт.
Открыть даташит →PIC17C762-33I/L
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC17C762T-33/L
✅ Прямая замена✓ В наличии
$15.4 / шт.
Открыть даташит →PIC17C762-33/L Максимальные параметры и электрические характеристики
| Core Architecture | PIC17C (8-bit) |
| Clock Frequency | 33 MHz |
| Instruction Cycle | 121 ns (8.25 MIPS) |
| Program Memory Type | OTP (One-Time Programmable) |
| Program Memory Size | 16 KB (8K x 16) |
| Data RAM | 678 bytes |
| I/O Pins | 66 |
| ADC | 10-bit |
| Напряжение питания | 4.5 V to 5.5 V |
| Корпус | 84-PLCC (29.31 x 29.31 mm) |
| Тип монтажа | Surface Mount |
| Instruction Set | 58 single-word instructions |
| Hardware Multiplier | 8 x 8 single-cycle |
| Communication | USART, MSSP (SPI/I2C) |
| Peripherals | Capture/Compare/PWM, Timers, ADC |
Конфигурация выводов PIC17C762-33/L
| Контакт 1 | RA0/AN0 — Port A bit 0 / Analog input 0 |
| Контакт 2 | RA1/AN1 — Port A bit 1 / Analog input 1 |
| Контакт 3 | RA2/AN2 — Port A bit 2 / Analog input 2 |
| Контакт 4 | RA3/AN3 — Port A bit 3 / Analog input 3 |
| Контакт 5 | VDD — Positive supply voltage (4.5V-5.5V) |
| Контакт 6 | RA4/AN4 — Port A bit 4 / Analog input 4 |
| Контакт 7 | RA5/AN5 — Port A bit 5 / Analog input 5 |
| Контакт 8 | RA6/OSC1 — Port A bit 6 / Crystal oscillator input |
| Контакт 9 | RA7/OSC2 — Port A bit 7 / Crystal oscillator output |
| Контакт 10 | VSS — Ground reference |
| Контакт 11 | RB0/INT — Port B bit 0 / External interrupt |
| Контакт 12 | RB1 — Port B bit 1 |
| Контакт 13 | RB2 — Port B bit 2 |
| Контакт 14 | RB3 — Port B bit 3 |
| Контакт 15 | RB4 — Port B bit 4 |
| Контакт 16 | RB5 — Port B bit 5 |
| Контакт 17 | RB6 — Port B bit 6 |
| Контакт 18 | RB7 — Port B bit 7 |
| Контакт 19 | RC0 — Port C bit 0 |
| Контакт 20 | RC1 — Port C bit 1 |
| Контакт 21 | RC2 — Port C bit 2 |
| Контакт 22 | RC3 — Port C bit 3 |
| Контакт 23 | RC4 — Port C bit 4 |
| Контакт 24 | RC5 — Port C bit 5 |
| Контакт 25 | RC6 — Port C bit 6 |
| Контакт 26 | RC7 — Port C bit 7 |
| Контакт 27 | RD0 — Port D bit 0 |
| Контакт 28 | RD1 — Port D bit 1 |
| Контакт 29 | RD2 — Port D bit 2 |
| Контакт 30 | RD3 — Port D bit 3 |
| Контакт 31 | RD4 — Port D bit 4 |
| Контакт 32 | RD5 — Port D bit 5 |
| Контакт 33 | RD6 — Port D bit 6 |
| Контакт 34 | RD7 — Port D bit 7 |
| Контакт 35 | RE0 — Port E bit 0 |
| Контакт 36 | RE1 — Port E bit 1 |
| Контакт 37 | RE2 — Port E bit 2 |
| Контакт 38 | RE3 — Port E bit 3 |
| Контакт 39 | RE4 — Port E bit 4 |
| Контакт 40 | RE5 — Port E bit 5 |
| Контакт 41 | RE6 — Port E bit 6 |
| Контакт 42 | RE7 — Port E bit 7 |
| Контакт 43 | RF0 — Port F bit 0 |
| Контакт 44 | RF1 — Port F bit 1 |
| Контакт 45 | RF2 — Port F bit 2 |
| Контакт 46 | RF3 — Port F bit 3 |
| Контакт 47 | RF4 — Port F bit 4 |
| Контакт 48 | RF5 — Port F bit 5 |
| Контакт 49 | RF6 — Port F bit 6 |
| Контакт 50 | RF7 — Port F bit 7 |
| Контакт 51 | RG0 — Port G bit 0 |
| Контакт 52 | RG1 — Port G bit 1 |
| Контакт 53 | RG2 — Port G bit 2 |
| Контакт 54 | RG3 — Port G bit 3 |
| Контакт 55 | RG4 — Port G bit 4 |
| Контакт 56 | MCLR — Master Clear (reset) input |
| Контакт 57 | VDD — Positive supply voltage |
| Контакт 58 | VSS — Ground |
| Контакт 59 | XTAL1 — Crystal oscillator input |
| Контакт 60 | XTAL2 — Crystal oscillator output |
| Контакт 61 | TOCKI — Timer 0 clock input |
| Контакт 62 | CCP1 — Capture/Compare/PWM 1 |
| Контакт 63 | CCP2 — Capture/Compare/PWM 2 |
| Контакт 64 | TX/CK — USART asynchronous transmit / synchronous clock |
| Контакт 65 | RX/DT — USART asynchronous receive / synchronous data |
| Контакт 66 | SCLK — MSSP serial clock (SPI/I2C) |
| Контакт 67 | SDI/SDA — MSSP serial data in (SPI) / data (I2C) |
| Контакт 68 | SDO — MSSP serial data out (SPI) |
| Контакт 69 | SS — MSSP slave select (SPI) |
| Контакт 70 | AN6 — Analog input 6 |
| Контакт 71 | AN7 — Analog input 7 |
| Контакт 72 | AN8 — Analog input 8 |
| Контакт 73 | AN9 — Analog input 9 |
| Контакт 74 | AN10 — Analog input 10 |
| Контакт 75 | AN11 — Analog input 11 |
| Контакт 76 | NC — Not connected (per datasheet) |
| Контакт 77 | NC — Not connected (per datasheet) |
| Контакт 78 | NC — Not connected (per datasheet) |
| Контакт 79 | NC — Not connected (per datasheet) |
| Контакт 80 | NC — Not connected (per datasheet) |
| Контакт 81 | NC — Not connected (per datasheet) |
| Контакт 82 | VDD — Positive supply voltage |
| Контакт 83 | VSS — Ground |
| Контакт 84 | NC — Not connected (per datasheet) |
Типичное применение
PIC17C762-33/L подходит для 7 применениеs: Industrial Process Control, Motor Control Front-End, Legacy Embedded Equipment Maintenance, Printer and Display Controllers, Automotive Body Electronics, Instrumentation and Data Acquisition, Educational and Development Boards.
Industrial Process Control
The PIC17C762-33/L's 66 I/O pins, 10-bit ADC, and 8.25 MIPS throughput make it well suited for industrial process control applications. Its 5 V supply tolerance (4.5 V to 5.5 V) aligns with legacy industrial backplanes, while 678 bytes of RAM supports sensor acquisition buffers. With 16 KB of OTP program memory, the MCU handles PID control loops, alarm monitoring, and HMI key handling. Designers should pair this part with external digital isolation and opto-couplers for industrial-grade noise immunity, leveraging the PIC17C family reference designs from Microchip.
Рекомендуется
Motor Control Front-End
For motor control front-end tasks, the PIC17C762-33/L provides Capture/Compare/PWM (CCP) modules and a fast 121 ns instruction cycle, enabling precise PWM generation for BLDC and stepper motor commutation. Its 33 MHz clock supports up to 33 MHz PWM resolution with adequate software margin for feedback control. The 10-bit ADC reads back current and voltage sensing. Engineers typically pair this MCU with a PIC17C756A upgrade when adding FOC algorithms, and use external gate drivers such as the MCP1416 to drive power MOSFETs in the H-bridge.
Рекомендуется
Legacy Embedded Equipment Maintenance
The PIC17C762-33/L remains functional for maintaining installed legacy embedded equipment that was originally designed around the PIC17C core. Because OTP memory is one-time programmable, field upgrades require module replacement rather than firmware flashing. The 84-PLCC package is socket-compatible, simplifying board swaps. Engineers servicing old industrial controllers, printers, or scientific instruments can use this part as a direct replacement, ordering from distributors like DigiKey or Mouser that maintain obsolete-stock channels. Plan for PIC17C756A upgrades when the legacy design permits.
Рекомендуется
Printer and Display Controllers
The PIC17C762-33/L's 66 I/O pins and high-speed serial peripherals (USART, MSSP) suit printer controller and display driver boards. Its 8.25 MIPS performance handles character rendering, stepper motor control for paper feed, and parallel interface protocols for LCD or VFD displays. The 16 KB program memory holds font tables and command parsing routines. Designers use the PIC17C family reference design for parallel port multiplexing and stepper sequencing, often paired with the PIC17C756A when more complex raster image processing is required.
Рекомендуется
Automotive Body Electronics
Although the PIC17C762-33/L is not AEC-Q100 qualified, it has historically been used in non-safety automotive body electronics such as HVAC controllers, seat controllers, and dashboard illumination drivers. The 5 V supply, 33 MHz clock, and 66 I/O pins support multiplexed body wiring, PWM dimming, and LIN/CAN bridge functions. For new automotive designs, however, Microchip recommends PIC18F8520 or PIC18F46K22 with proper AEC-Q100 qualification. The PIC17C762-33/L is suitable for service replacement of installed units only.
Рекомендуется
Instrumentation and Data Acquisition
The PIC17C762-33/L's 10-bit ADC and ample 66 I/O pins enable multi-channel data acquisition front-ends for instrumentation. Its 121 ns instruction cycle supports real-time sampling of up to 8 channels at moderate rates, with 678 bytes of RAM providing sample buffering. The MSSP peripheral allows SPI communication with high-resolution external ADCs when higher precision is required. Pair the MCU with op-amp signal conditioning and an SPI ADC for 16-bit measurement systems, using the PIC17C756A upgrade path when more code space is needed for advanced DSP algorithms.
Рекомендуется
Educational and Development Boards
The PIC17C762-33/L is occasionally used in educational settings to teach 8-bit MCU architecture, OTP programming workflows, and PIC17C family peripheral usage. Its 84-PLCC socket-mounting simplifies prototype replacement, and the 33 MHz clock provides realistic performance for student projects. Instructors can demonstrate ADC, PWM, and USART using Microchip's PIC17C reference design examples. However, for new educational curricula, the PIC18F or dsPIC33 families are recommended due to modern peripherals, in-circuit debug support, and active product status.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC17C762-33/L — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC17C756A-33E/L | PIC17C756AT-33E/L | PIC17C756AT-33I/L | PIC17C752T-33/L |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 84-PLCC (29.31 x 29.31 mm) | 84-PLCC (29.31 x 29.31 mm) | 84-PLCC (29.31 x 29.31 mm) | 84-PLCC (29.31 x 29.31 mm) | 84-PLCC (29.31 x 29.31 mm) |
| Core Architecture | PIC17C (8-bit) | PIC17C (8-bit) | PIC17C (8-bit) | PIC17C (8-bit) | PIC17C (8-bit) |
| Clock Frequency | 33 MHz | 33 MHz | 33 MHz | 33 MHz | 33 MHz |
| Program Memory | 16 KB OTP | 32 KB OTP | 32 KB OTP | 32 KB OTP | 16 KB OTP |
| Data RAM | 678 bytes | 902 bytes (PIC17C756A family) | 902 bytes | 902 bytes | 678 bytes |
| I/O Pins | 66 | 66 | 66 | 66 | 66 |
| ADC | 10-bit | 10-bit | 10-bit | 10-bit | 10-bit |
| Supply Voltage | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
Ключевые отличия
- Higher program memory than PIC17C752 in same package (против PIC17C752T-33/L)
- Compatible memory-upgrade path via PIC17C756A (против PIC17C756A-33E/L)
- Microchip legacy support for installed base (против PIC18F8520 (recommended successor))
Заметки по проектированию
Decoupling: Place 100 nF ceramic capacitors as close as possible to every VDD pin (pins 5, 57, 82) and a single 10 uF bulk capacitor on the supply rail. The PIC17C762-33/L draws up to ~100 mA at 33 MHz with all peripherals active, so sufficient bulk capacitance prevents supply droop during ADC conversions and PWM switching events. According to Microchip's PIC17C family hardware design guidelines, inadequate decoupling is the most common cause of ADC noise and PLL instability.
OTP Memory Programming: The PIC17C762-33/L uses One-Time Programmable (OTP) memory, which cannot be erased after programming. Always verify firmware using a windowed or flash sibling part (such as PIC17C756A or PIC18F8520) before committing to OTP production. Verify code checksum, configuration bits, and oscillator settings before the final programming pass to avoid bricking units. In-circuit programming (ICP) requires careful MCLR/VPP sequencing per the datasheet.
Thermal Management: At 33 MHz with all peripherals active, the PLCC-84 package dissipates approximately 0.5 W to 1 W depending on I/O loading. The plastic PLCC package has a theta_JA of approximately 35-40 C/W, so junction temperature rise above ambient is around 20-40 C. Industrial environments (up to 85 C ambient) keep junction well below the 125 C maximum, but enclosed or stacked designs should add thermal vias under the PLCC pad for improved heat spreading.
Информация о соответствии
Compliance status not specified in the verified web data; the part is obsolete so modern compliance documentation may not be available. Refer to Microchip product page for legacy compliance statements.
