PIC18C658-E/L - 8-bit 32KB OTP MCU w/ CAN, 52 I/O | Microchip
Артикул: PIC18C658-E/L ⚠ Последняя закупка| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $8.62 | $8,62 |
| 10 | $7.92 | $79,20 |
| 100 | $7.2 | $720,00 |
| 500 | $6.5 | $3.250,00 |
| 1.000 | $5.8 | $5.800,00 |
PIC18C658-E/L Обзор
What is a PIC18 microcontroller? The PIC18 family is a class of 8-bit Harvard-architecture microcontrollers from Microchip Technology, sitting hierarchically between the legacy PIC16 mid-range family and the 16-bit dsPIC/PIC24 families. PIC18 parts add a wider 16-bit instruction path, hardware multiplier, larger linear addressing space and richer peripherals while preserving the PIC16 programming model, making them the entry point for engineers needing CAN, USB, or larger memory footprints without moving to a 16-bit core.
Key features include 40 MHz maximum operating frequency (10 MIPS), 12-channel 10-bit ADC, integrated CAN 2.0B peripheral, 52 digital I/O pins, PWM, watchdog timer, brown-out reset, low-voltage detect and power-on reset. The 'E' suffix denotes the -40C to +125C extended temperature grade suited to industrial and automotive under-hood environments. The 68-pin PLCC (J-Lead) package gives through-hole solderability and reliable socketed programming on legacy boards.
The PIC18C658 is built on a baseline CMOS process and the architecture has been superseded by the flash-based PIC18F458 and PIC18F6585 families. Microchip's product page explicitly recommends the PIC18F6585 as the newer replacement. The OTP program memory cannot be re-programmed in-circuit, which is a key lifetime constraint for production designs.
Typical applications include CAN-based industrial node controllers, automotive body and chassis ECUs, building-automation gateways, and legacy factory-floor PLC I/O modules. The combination of CAN peripheral, extended temperature range and 52 I/O pins covers typical CAN node requirements without external bus controllers.
When designing with this part, note that OTP memory prevents firmware updates and the device is in Microchip's mature/legacy lifecycle; new designs should evaluate the PIC18F458, PIC18F6585 or dsPIC33E families. Use MPLAB IDE with MPASM or C18 compiler toolchain for firmware development.
Аналоги без доработки для PIC18C658-E/L — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC18C658-E/L (тот же форм-фактор и посадочное место) — отличается по Operating Temperature, Supply Voltage, Mounting Type, Package, ADC.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC18F6585-I/L
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC18F6585-E/L
✅ Прямая замена✓ В наличии
$5.25 / шт.
Открыть даташит →PIC18C658-I/L
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC18F6680-I/L
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC18F8680-I/L
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
DSPIC33EV256GM106-I/PT
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$4.17 / шт.
Открыть даташит →PIC18C658-E/L Максимальные параметры и электрические характеристики
| Core | PIC18 8-bit RISC |
| Program Memory | 32 KB OTP |
| RAM | 1536 bytes |
| Data EEPROM | Not present (OTP part) |
| Максимальная тактовая частота | 40 MHz |
| Performance | 10 MIPS |
| Напряжение питания | 5 V (typical, 4.2 V min per PIC18 spec) |
| Рабочая температура | -40C to +125C (E suffix, extended) |
| Digital I/O Pins | 52 |
| ADC | 12-channel, 10-bit |
| CAN | 1 x CAN 2.0B controller |
| PWM | Yes (Capture/Compare/PWM modules) |
| Watchdog Timer | Yes |
| Brown-out Reset / LVD / POR | Yes |
| Корпус | 68-pin PLCC (J-Lead) |
| Тип монтажа | Surface Mount / Socket (PLCC) |
Конфигурация выводов PIC18C658-E/L
| Контакт 1 | RA0/AN0 — PORTA bit 0 / analog input 0 |
| Контакт 2 | RA1/AN1 — PORTA bit 1 / analog input 1 |
| Контакт 3 | RA2/AN2 — PORTA bit 2 / analog input 2 |
| Контакт 4 | RA3/AN3/VREF+ — PORTA bit 3 / analog input 3 / VREF+ |
| Контакт 5 | RA4/AN4 — PORTA bit 4 / analog input 4 |
| Контакт 6 | RA5/AN5 — PORTA bit 5 / analog input 5 |
| Контакт 7 | RA6 — PORTA bit 6 |
| Контакт 8 | OSC1/CLKI — Oscillator crystal input / external clock in |
| Контакт 9 | OSC2/CLKO — Oscillator crystal output / clock out |
| Контакт 10 | RC0/T1OSO/T1CKI — PORTC bit 0 / Timer1 oscillator out / T1 clock in |
| Контакт 11 | RC1/T1OSI — PORTC bit 1 / Timer1 oscillator in |
| Контакт 12 | RC2/CCP1 — PORTC bit 2 / Capture/Compare/PWM 1 |
| Контакт 13 | RC3/SCK/SCL — PORTC bit 3 / SPI clock / I2C clock |
| Контакт 14 | RC4/SDI/SDA — PORTC bit 4 / SPI data in / I2C data |
| Контакт 15 | RC5/SDO — PORTC bit 5 / SPI data out |
| Контакт 16 | RC6/TX/CK — PORTC bit 6 / USART TX / clock |
| Контакт 17 | RC7/RX/DT — PORTC bit 7 / USART RX / data |
| Контакт 18 | MCLR/VPP — Master clear (reset) / programming voltage |
| Контакт 19 | VSS — Ground |
| Контакт 20 | VDD — Positive supply (5V) |
| Контакт 21 | RB0/INT0 — PORTB bit 0 / external interrupt 0 |
| Контакт 22 | RB1/INT1 — PORTB bit 1 / external interrupt 1 |
| Контакт 23 | RB2/INT2 — PORTB bit 2 / external interrupt 2 |
| Контакт 24 | RB3/INT3/CANRX — PORTB bit 3 / external interrupt 3 / CAN receive |
| Контакт 25 | RB4/INT4/CANTX — PORTB bit 4 / external interrupt 4 / CAN transmit |
| Контакт 26 | RB5 — PORTB bit 5 |
| Контакт 27 | RB6/PGC — PORTB bit 6 / ICSP clock |
| Контакт 28 | RB7/PGD — PORTB bit 7 / ICSP data |
| Контакт 29 | VSS — Ground |
| Контакт 30 | VDD — Positive supply (5V) |
| Контакт 31 | RD0 — PORTD bit 0 |
| Контакт 32 | RD1 — PORTD bit 1 |
| Контакт 33 | RD2 — PORTD bit 2 |
| Контакт 34 | RD3 — PORTD bit 3 |
| Контакт 35 | RD4 — PORTD bit 4 |
| Контакт 36 | RD5 — PORTD bit 5 |
| Контакт 37 | RD6 — PORTD bit 6 |
| Контакт 38 | RD7 — PORTD bit 7 |
| Контакт 39 | VSS — Ground |
| Контакт 40 | VDD — Positive supply (5V) |
| Контакт 41 | RE0/RD — PORTE bit 0 / parallel slave port read |
| Контакт 42 | RE1/WR — PORTE bit 1 / parallel slave port write |
| Контакт 43 | RE2/CS — PORTE bit 2 / parallel slave port chip select |
| Контакт 44 | NC — Not connected (per datasheet) |
| Контакт 45 | NC — Not connected (per datasheet) |
| Контакт 46 | NC — Not connected (per datasheet) |
| Контакт 47 | NC — Not connected (per datasheet) |
| Контакт 48 | NC — Not connected (per datasheet) |
| Контакт 49 | NC — Not connected (per datasheet) |
| Контакт 50 | NC — Not connected (per datasheet) |
| Контакт 51 | NC — Not connected (per datasheet) |
| Контакт 52 | NC — Not connected (per datasheet) |
| Контакт 53 | NC — Not connected (per datasheet) |
| Контакт 54 | NC — Not connected (per datasheet) |
| Контакт 55 | NC — Not connected (per datasheet) |
| Контакт 56 | NC — Not connected (per datasheet) |
| Контакт 57 | RF0 — PORTF bit 0 (analog input on PIC18F variants) |
| Контакт 58 | RF1 — PORTF bit 1 |
| Контакт 59 | RF2 — PORTF bit 2 |
| Контакт 60 | RF3 — PORTF bit 3 |
| Контакт 61 | RF4 — PORTF bit 4 |
| Контакт 62 | RF5 — PORTF bit 5 |
| Контакт 63 | RF6 — PORTF bit 6 |
| Контакт 64 | RF7 — PORTF bit 7 |
| Контакт 65 | VSS — Ground |
| Контакт 66 | VDD — Positive supply (5V) |
| Контакт 67 | RG0 — PORTG bit 0 |
| Контакт 68 | RG1 — PORTG bit 1 |
Типичное применение
PIC18C658-E/L подходит для 6 применениеs: Automotive CAN Body Controllers, Industrial CAN Node Modules, Building Automation Gateways, Legacy PLC I/O Modules, HVAC Control Boards, Sensor Hub / Data Acquisition Front-End.
Automotive CAN Body Controllers
The PIC18C658-E/L fits automotive CAN body controllers because of its integrated CAN 2.0B peripheral, 52 digital I/O pins for switch/relay scanning, and extended -40C to +125C temperature grade. The 32KB OTP program memory is sufficient for body-controller state machines that drive door locks, mirrors, lighting and HVAC actuators. Used between the CAN bus transceiver (e.g., MCP2551) and the load drivers, the MCU runs at 40 MHz / 10 MIPS to handle CAN message filtering, debouncing, and PWM dimming in real time. Trade-off: OTP memory prevents field firmware updates, so consider PIC18F6585 for designs that need post-production firmware revisions.
Рекомендуется
Industrial CAN Node Modules
For factory-floor CANopen/DeviceNet slave nodes, the PIC18C658-E/L offers 32KB OTP for protocol stacks, 12-channel 10-bit ADC for sensor inputs, and 52 I/O for valve/sensor interfacing. The extended temperature grade supports unconditioned cabinet locations. Placed on a PLCC-68 socketed carrier, the part is easy to swap during commissioning. The on-chip CAN controller plus an external CAN transceiver eliminates the need for a separate bus controller IC. Limit: OTP memory blocks firmware updates, so choose PIC18F6585 for nodes that may need protocol-stack revisions.
Рекомендуется
Building Automation Gateways
Building automation gateways that bridge RS-485, sensor networks, and CAN bus benefit from the PIC18C658-E/L's combination of 52 I/O, 12-bit ADC and CAN peripheral in a single package. The 32KB OTP accommodates BACnet or proprietary protocol stacks. Operated at 5V, the device interfaces directly with legacy 5V industrial sensors and actuators without level shifters. The PLCC-68 package supports socketed installation on DIN-rail carriers for field serviceability. For new gateway designs the flash-based PIC18F6680-I/L offers the same pinout with field upgradability.
Рекомендуется
Legacy PLC I/O Modules
Legacy PLC I/O expansion modules often use the PIC18C658-E/L because of its PLCC-68 socketed form factor and 5V operation matching older PLC backplanes. The 52 I/O lines and 12-channel ADC cover typical analog/digital signal-conditioning I/O counts. Brown-out reset and watchdog timer provide deterministic recovery from industrial noise events. PLCC sockets allow hot-swap of modules during commissioning. Drawback: OTP memory means each variant needs its own masked part; flash-based PIC18F alternatives are recommended for any new PLC product line.
Рекомендуется
HVAC Control Boards
The PIC18C658-E/L's 12-bit ADC for temperature/pressure sensors, PWM outputs for fan/blower speed control, and CAN interface for chiller/boiler networking make it well-suited to HVAC control boards. Extended -40C to +125C temperature range supports attic and rooftop installations. 32KB OTP holds the control algorithm and scheduler tables. The 40 MHz core computes PID loops in real time. Migration target: PIC18F6585 in the same PLCC-68 package for designs that need firmware-tuning capability.
Рекомендуется
Sensor Hub / Data Acquisition Front-End
As a sensor hub front-end, the PIC18C658-E/L aggregates up to 12 analog sensor channels (10-bit ADC), multiplexes digital I/O, and forwards the data over CAN to a master controller. The 1536-byte RAM buffers short bursts, and 52 I/O drives addressable sensor arrays. The 40 MHz / 10 MIPS core handles CAN arbitration without missing frames. PLCC-68 socketed design simplifies field replacement. For new sensor hubs requiring field firmware updates, the PIC18F6585-I/L is the recommended same-package drop-in.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC18C658-E/L — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC18F6585-I/L | PIC18F6585-E/L | PIC18C658-I/L | PIC18F6680-I/L | PIC18F8680-I/L |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 68-pin PLCC (J-Lead) | 68-pin PLCC (J-Lead) | 68-pin PLCC (J-Lead) | 68-pin PLCC (J-Lead) | 68-pin PLCC (J-Lead) | 68-pin PLCC (J-Lead) |
| Program Memory | 32 KB OTP | 48 KB Flash | 48 KB Flash | 32 KB OTP | 32 KB Flash | 32 KB Flash |
| RAM | 1536 bytes | 3328 bytes | 3328 bytes | 1536 bytes | 3328 bytes | 3328 bytes |
| CAN Module | Yes (CAN 2.0B) | Yes (CAN 2.0B) | Yes (CAN 2.0B) | Yes (CAN 2.0B) | Yes (CAN 2.0B) | Yes (CAN 2.0B) |
| ADC | 12-ch x 10-bit | 12-ch x 10-bit | 12-ch x 10-bit | 12-ch x 10-bit | 12-ch x 10-bit | 12-ch x 10-bit |
| Operating Temperature | -40C to +125C | -40C to +85C | -40C to +125C | -40C to +85C | -40C to +85C | -40C to +85C |
| Memory Type | OTP (one-time programmable) | Flash (reprogrammable) | Flash (reprogrammable) | OTP (one-time programmable) | Flash (reprogrammable) | Flash (reprogrammable) |
| Lifecycle Status | Last-time-buy | Active | Active | Last-time-buy | Active | Active |
Ключевые отличия
- Extended temperature range for harsh environments (против PIC18C658-I/L)
- Flash reprogrammability (vs OTP) (против PIC18F6585-E/L)
- Integrated CAN 2.0B controller (против PIC18F458)
Заметки по проектированию
PIC18C658-E/L operates from a single 5V supply. Decouple each VDD/VSS pair with a 100nF ceramic capacitor placed within 5 mm of the pin; add a bulk 10uF tantalum or aluminum capacitor at the board supply input. The device has multiple VDD pins (10, 20, 30, 40, 66) - tie all to 5V and all VSS to ground. Brown-out reset (BOR) and low-voltage detect (LVD) provide brown-out protection; configure BOR in the configuration bits to match your application's minimum operating voltage (typically 4.2V).
PIC18C658-E/L program memory is OTP (One-Time Programmable), not flash - the firmware cannot be updated once programmed. Verify firmware correctness in a flash-based PIC18F equivalent (PIC18F6585 or PIC18F458) before committing to OTP programming. ICSP programming via PGC/PGD pins 27/28 requires MPLAB and a compatible programmer; ensure ICSP pins are accessible on the PCB and not used as outputs during programming (MCLR/VPP on pin 18 must be driven to programming voltage during programming).
Place the external CAN transceiver (e.g., MCP2551) within 50 mm of pins 24 (CANRX) and 25 (CANTX) to keep the bus stub short. Use a 120 ohm termination resistor at each end of the CAN bus and route CANH/CANL as a twisted pair with characteristic impedance of 120 ohms. The 40 MHz oscillator crystal on pins 8/9 should be placed close to the IC with short traces and a guard ground to minimize EMI; OSC1/OSC2 are sensitive to stray capacitance.
Информация о соответствии
RoHS/REACH/lead-free status not explicitly listed in the verified data. The 'E' extended temperature grade (-40C to +125C) makes the part suitable for industrial and many automotive applications, but AEC-Q100 qualification is not stated - contact Microchip for automotive qualification documentation before deploying in safety-critical automotive ECUs.
