PIC18C658-E/L - 8-bit 32KB OTP MCU w/ CAN, 52 I/O | Microchip
Référence : PIC18C658-E/L ⚠ Dernier achat| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $8.62 | $8,62 |
| 10 | $7.92 | $79,20 |
| 100 | $7.2 | $720,00 |
| 500 | $6.5 | $3 250,00 |
| 1 000 | $5.8 | $5 800,00 |
PIC18C658-E/L Présentation
What is a PIC18 microcontroller? The PIC18 family is a class of 8-bit Harvard-architecture microcontrollers from Microchip Technology, sitting hierarchically between the legacy PIC16 mid-range family and the 16-bit dsPIC/PIC24 families. PIC18 parts add a wider 16-bit instruction path, hardware multiplier, larger linear addressing space and richer peripherals while preserving the PIC16 programming model, making them the entry point for engineers needing CAN, USB, or larger memory footprints without moving to a 16-bit core.
Key features include 40 MHz maximum operating frequency (10 MIPS), 12-channel 10-bit ADC, integrated CAN 2.0B peripheral, 52 digital I/O pins, PWM, watchdog timer, brown-out reset, low-voltage detect and power-on reset. The 'E' suffix denotes the -40C to +125C extended temperature grade suited to industrial and automotive under-hood environments. The 68-pin PLCC (J-Lead) package gives through-hole solderability and reliable socketed programming on legacy boards.
The PIC18C658 is built on a baseline CMOS process and the architecture has been superseded by the flash-based PIC18F458 and PIC18F6585 families. Microchip's product page explicitly recommends the PIC18F6585 as the newer replacement. The OTP program memory cannot be re-programmed in-circuit, which is a key lifetime constraint for production designs.
Typical applications include CAN-based industrial node controllers, automotive body and chassis ECUs, building-automation gateways, and legacy factory-floor PLC I/O modules. The combination of CAN peripheral, extended temperature range and 52 I/O pins covers typical CAN node requirements without external bus controllers.
When designing with this part, note that OTP memory prevents firmware updates and the device is in Microchip's mature/legacy lifecycle; new designs should evaluate the PIC18F458, PIC18F6585 or dsPIC33E families. Use MPLAB IDE with MPASM or C18 compiler toolchain for firmware development.
Alternatives de remplacement direct pour PIC18C658-E/L — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC18C658-E/L (même facteur de forme et même empreinte) — différant par Operating Temperature, Supply Voltage, Mounting Type, Package, ADC.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC18F6585-I/L
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC18F6585-E/L
✅ Remplacement direct✓ En stock
$5.25 / unité
Voir la fiche technique →PIC18C658-I/L
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC18F6680-I/L
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC18F8680-I/L
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
DSPIC33EV256GM106-I/PT
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$4.17 / unité
Voir la fiche technique →PIC18C658-E/L Valeurs maximales et caractéristiques électriques
| Core | PIC18 8-bit RISC |
| Program Memory | 32 KB OTP |
| RAM | 1536 bytes |
| Data EEPROM | Not present (OTP part) |
| Fréquence d'horloge maximale | 40 MHz |
| Performance | 10 MIPS |
| Tension d'alimentation | 5 V (typical, 4.2 V min per PIC18 spec) |
| Température de fonctionnement | -40C to +125C (E suffix, extended) |
| Digital I/O Pins | 52 |
| ADC | 12-channel, 10-bit |
| CAN | 1 x CAN 2.0B controller |
| PWM | Yes (Capture/Compare/PWM modules) |
| Watchdog Timer | Yes |
| Brown-out Reset / LVD / POR | Yes |
| Boîtier | 68-pin PLCC (J-Lead) |
| Type de montage | Surface Mount / Socket (PLCC) |
Configuration des broches de PIC18C658-E/L
| Broche 1 | RA0/AN0 — PORTA bit 0 / analog input 0 |
| Broche 2 | RA1/AN1 — PORTA bit 1 / analog input 1 |
| Broche 3 | RA2/AN2 — PORTA bit 2 / analog input 2 |
| Broche 4 | RA3/AN3/VREF+ — PORTA bit 3 / analog input 3 / VREF+ |
| Broche 5 | RA4/AN4 — PORTA bit 4 / analog input 4 |
| Broche 6 | RA5/AN5 — PORTA bit 5 / analog input 5 |
| Broche 7 | RA6 — PORTA bit 6 |
| Broche 8 | OSC1/CLKI — Oscillator crystal input / external clock in |
| Broche 9 | OSC2/CLKO — Oscillator crystal output / clock out |
| Broche 10 | RC0/T1OSO/T1CKI — PORTC bit 0 / Timer1 oscillator out / T1 clock in |
| Broche 11 | RC1/T1OSI — PORTC bit 1 / Timer1 oscillator in |
| Broche 12 | RC2/CCP1 — PORTC bit 2 / Capture/Compare/PWM 1 |
| Broche 13 | RC3/SCK/SCL — PORTC bit 3 / SPI clock / I2C clock |
| Broche 14 | RC4/SDI/SDA — PORTC bit 4 / SPI data in / I2C data |
| Broche 15 | RC5/SDO — PORTC bit 5 / SPI data out |
| Broche 16 | RC6/TX/CK — PORTC bit 6 / USART TX / clock |
| Broche 17 | RC7/RX/DT — PORTC bit 7 / USART RX / data |
| Broche 18 | MCLR/VPP — Master clear (reset) / programming voltage |
| Broche 19 | VSS — Ground |
| Broche 20 | VDD — Positive supply (5V) |
| Broche 21 | RB0/INT0 — PORTB bit 0 / external interrupt 0 |
| Broche 22 | RB1/INT1 — PORTB bit 1 / external interrupt 1 |
| Broche 23 | RB2/INT2 — PORTB bit 2 / external interrupt 2 |
| Broche 24 | RB3/INT3/CANRX — PORTB bit 3 / external interrupt 3 / CAN receive |
| Broche 25 | RB4/INT4/CANTX — PORTB bit 4 / external interrupt 4 / CAN transmit |
| Broche 26 | RB5 — PORTB bit 5 |
| Broche 27 | RB6/PGC — PORTB bit 6 / ICSP clock |
| Broche 28 | RB7/PGD — PORTB bit 7 / ICSP data |
| Broche 29 | VSS — Ground |
| Broche 30 | VDD — Positive supply (5V) |
| Broche 31 | RD0 — PORTD bit 0 |
| Broche 32 | RD1 — PORTD bit 1 |
| Broche 33 | RD2 — PORTD bit 2 |
| Broche 34 | RD3 — PORTD bit 3 |
| Broche 35 | RD4 — PORTD bit 4 |
| Broche 36 | RD5 — PORTD bit 5 |
| Broche 37 | RD6 — PORTD bit 6 |
| Broche 38 | RD7 — PORTD bit 7 |
| Broche 39 | VSS — Ground |
| Broche 40 | VDD — Positive supply (5V) |
| Broche 41 | RE0/RD — PORTE bit 0 / parallel slave port read |
| Broche 42 | RE1/WR — PORTE bit 1 / parallel slave port write |
| Broche 43 | RE2/CS — PORTE bit 2 / parallel slave port chip select |
| Broche 44 | NC — Not connected (per datasheet) |
| Broche 45 | NC — Not connected (per datasheet) |
| Broche 46 | NC — Not connected (per datasheet) |
| Broche 47 | NC — Not connected (per datasheet) |
| Broche 48 | NC — Not connected (per datasheet) |
| Broche 49 | NC — Not connected (per datasheet) |
| Broche 50 | NC — Not connected (per datasheet) |
| Broche 51 | NC — Not connected (per datasheet) |
| Broche 52 | NC — Not connected (per datasheet) |
| Broche 53 | NC — Not connected (per datasheet) |
| Broche 54 | NC — Not connected (per datasheet) |
| Broche 55 | NC — Not connected (per datasheet) |
| Broche 56 | NC — Not connected (per datasheet) |
| Broche 57 | RF0 — PORTF bit 0 (analog input on PIC18F variants) |
| Broche 58 | RF1 — PORTF bit 1 |
| Broche 59 | RF2 — PORTF bit 2 |
| Broche 60 | RF3 — PORTF bit 3 |
| Broche 61 | RF4 — PORTF bit 4 |
| Broche 62 | RF5 — PORTF bit 5 |
| Broche 63 | RF6 — PORTF bit 6 |
| Broche 64 | RF7 — PORTF bit 7 |
| Broche 65 | VSS — Ground |
| Broche 66 | VDD — Positive supply (5V) |
| Broche 67 | RG0 — PORTG bit 0 |
| Broche 68 | RG1 — PORTG bit 1 |
Applications typiques
PIC18C658-E/L convient pour 6 applications: Automotive CAN Body Controllers, Industrial CAN Node Modules, Building Automation Gateways, Legacy PLC I/O Modules, HVAC Control Boards, Sensor Hub / Data Acquisition Front-End.
Automotive CAN Body Controllers
The PIC18C658-E/L fits automotive CAN body controllers because of its integrated CAN 2.0B peripheral, 52 digital I/O pins for switch/relay scanning, and extended -40C to +125C temperature grade. The 32KB OTP program memory is sufficient for body-controller state machines that drive door locks, mirrors, lighting and HVAC actuators. Used between the CAN bus transceiver (e.g., MCP2551) and the load drivers, the MCU runs at 40 MHz / 10 MIPS to handle CAN message filtering, debouncing, and PWM dimming in real time. Trade-off: OTP memory prevents field firmware updates, so consider PIC18F6585 for designs that need post-production firmware revisions.
Recommandé
Industrial CAN Node Modules
For factory-floor CANopen/DeviceNet slave nodes, the PIC18C658-E/L offers 32KB OTP for protocol stacks, 12-channel 10-bit ADC for sensor inputs, and 52 I/O for valve/sensor interfacing. The extended temperature grade supports unconditioned cabinet locations. Placed on a PLCC-68 socketed carrier, the part is easy to swap during commissioning. The on-chip CAN controller plus an external CAN transceiver eliminates the need for a separate bus controller IC. Limit: OTP memory blocks firmware updates, so choose PIC18F6585 for nodes that may need protocol-stack revisions.
Recommandé
Building Automation Gateways
Building automation gateways that bridge RS-485, sensor networks, and CAN bus benefit from the PIC18C658-E/L's combination of 52 I/O, 12-bit ADC and CAN peripheral in a single package. The 32KB OTP accommodates BACnet or proprietary protocol stacks. Operated at 5V, the device interfaces directly with legacy 5V industrial sensors and actuators without level shifters. The PLCC-68 package supports socketed installation on DIN-rail carriers for field serviceability. For new gateway designs the flash-based PIC18F6680-I/L offers the same pinout with field upgradability.
Recommandé
Legacy PLC I/O Modules
Legacy PLC I/O expansion modules often use the PIC18C658-E/L because of its PLCC-68 socketed form factor and 5V operation matching older PLC backplanes. The 52 I/O lines and 12-channel ADC cover typical analog/digital signal-conditioning I/O counts. Brown-out reset and watchdog timer provide deterministic recovery from industrial noise events. PLCC sockets allow hot-swap of modules during commissioning. Drawback: OTP memory means each variant needs its own masked part; flash-based PIC18F alternatives are recommended for any new PLC product line.
Recommandé
HVAC Control Boards
The PIC18C658-E/L's 12-bit ADC for temperature/pressure sensors, PWM outputs for fan/blower speed control, and CAN interface for chiller/boiler networking make it well-suited to HVAC control boards. Extended -40C to +125C temperature range supports attic and rooftop installations. 32KB OTP holds the control algorithm and scheduler tables. The 40 MHz core computes PID loops in real time. Migration target: PIC18F6585 in the same PLCC-68 package for designs that need firmware-tuning capability.
Recommandé
Sensor Hub / Data Acquisition Front-End
As a sensor hub front-end, the PIC18C658-E/L aggregates up to 12 analog sensor channels (10-bit ADC), multiplexes digital I/O, and forwards the data over CAN to a master controller. The 1536-byte RAM buffers short bursts, and 52 I/O drives addressable sensor arrays. The 40 MHz / 10 MIPS core handles CAN arbitration without missing frames. PLCC-68 socketed design simplifies field replacement. For new sensor hubs requiring field firmware updates, the PIC18F6585-I/L is the recommended same-package drop-in.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC18C658-E/L — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC18F6585-I/L | PIC18F6585-E/L | PIC18C658-I/L | PIC18F6680-I/L | PIC18F8680-I/L |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 68-pin PLCC (J-Lead) | 68-pin PLCC (J-Lead) | 68-pin PLCC (J-Lead) | 68-pin PLCC (J-Lead) | 68-pin PLCC (J-Lead) | 68-pin PLCC (J-Lead) |
| Program Memory | 32 KB OTP | 48 KB Flash | 48 KB Flash | 32 KB OTP | 32 KB Flash | 32 KB Flash |
| RAM | 1536 bytes | 3328 bytes | 3328 bytes | 1536 bytes | 3328 bytes | 3328 bytes |
| CAN Module | Yes (CAN 2.0B) | Yes (CAN 2.0B) | Yes (CAN 2.0B) | Yes (CAN 2.0B) | Yes (CAN 2.0B) | Yes (CAN 2.0B) |
| ADC | 12-ch x 10-bit | 12-ch x 10-bit | 12-ch x 10-bit | 12-ch x 10-bit | 12-ch x 10-bit | 12-ch x 10-bit |
| Operating Temperature | -40C to +125C | -40C to +85C | -40C to +125C | -40C to +85C | -40C to +85C | -40C to +85C |
| Memory Type | OTP (one-time programmable) | Flash (reprogrammable) | Flash (reprogrammable) | OTP (one-time programmable) | Flash (reprogrammable) | Flash (reprogrammable) |
| Lifecycle Status | Last-time-buy | Active | Active | Last-time-buy | Active | Active |
Principaux différenciateurs
- Extended temperature range for harsh environments (vs PIC18C658-I/L)
- Flash reprogrammability (vs OTP) (vs PIC18F6585-E/L)
- Integrated CAN 2.0B controller (vs PIC18F458)
Notes de conception
PIC18C658-E/L operates from a single 5V supply. Decouple each VDD/VSS pair with a 100nF ceramic capacitor placed within 5 mm of the pin; add a bulk 10uF tantalum or aluminum capacitor at the board supply input. The device has multiple VDD pins (10, 20, 30, 40, 66) - tie all to 5V and all VSS to ground. Brown-out reset (BOR) and low-voltage detect (LVD) provide brown-out protection; configure BOR in the configuration bits to match your application's minimum operating voltage (typically 4.2V).
PIC18C658-E/L program memory is OTP (One-Time Programmable), not flash - the firmware cannot be updated once programmed. Verify firmware correctness in a flash-based PIC18F equivalent (PIC18F6585 or PIC18F458) before committing to OTP programming. ICSP programming via PGC/PGD pins 27/28 requires MPLAB and a compatible programmer; ensure ICSP pins are accessible on the PCB and not used as outputs during programming (MCLR/VPP on pin 18 must be driven to programming voltage during programming).
Place the external CAN transceiver (e.g., MCP2551) within 50 mm of pins 24 (CANRX) and 25 (CANTX) to keep the bus stub short. Use a 120 ohm termination resistor at each end of the CAN bus and route CANH/CANL as a twisted pair with characteristic impedance of 120 ohms. The 40 MHz oscillator crystal on pins 8/9 should be placed close to the IC with short traces and a guard ground to minimize EMI; OSC1/OSC2 are sensitive to stray capacitance.
Informations de conformité
RoHS/REACH/lead-free status not explicitly listed in the verified data. The 'E' extended temperature grade (-40C to +125C) makes the part suitable for industrial and many automotive applications, but AEC-Q100 qualification is not stated - contact Microchip for automotive qualification documentation before deploying in safety-critical automotive ECUs.
