PIC18F2423-I/ML - 8-bit MCU, 16KB Flash, 40MHz QFN-28 | Microchip
Артикул: PIC18F2423-I/ML ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $6.57 | $6,57 |
| 10 | $5.91 | $59,10 |
| 100 | $5.26 | $526,00 |
| 500 | $4.74 | $2.370,00 |
| 1.000 | $4.21 | $4.210,00 |
PIC18F2423-I/ML Обзор
A PIC18 microcontroller is an 8-bit Harvard-architecture MCU family from Microchip Technology, positioned within the broader taxonomy of microcontroller -> embedded controller -> semiconductor. The PIC18F2XXX family adds enhanced flash memory, nanoWatt power management, and a 10-bit ADC to the legacy PIC16 baseline, making it suitable for consumer, industrial, and automotive under-hood applications.
Key features include 25 digital I/O pins, an enhanced USART with LIN support, an SPI and I²C (MSSP) peripheral, 10-bit ADC with up to 10 channels, two analogue comparators, three timers (Timer0/Timer1/Timer2) and a hardware ECCPEG block. NanoWatt technology provides ultra-low-power sleep modes with < 100 nA typical current draw, ideal for battery-powered nodes. The 28-QFN footprint also includes an exposed pad for thermal dissipation.
Architecturally, the PIC18F2423 uses a modified Harvard core with a 16-bit instruction word and 8-bit data path, allowing single-cycle 40 MHz operation. Enhanced flash offers 100K erase/write cycle endurance and > 40-year data retention, far exceeding the legacy 16F EEPROM endurance. The integrated 10-bit ADC achieves ~ 7.5 ksps with acquisition control and selectable voltage references.
Typical applications include industrial control sensors, battery-powered IoT nodes, automotive LIN slave ECUs, USB-to-UART bridge dongles, and small appliance user interfaces. The combination of ECCPEG, 16 KB flash, and nanoWatt modes makes the PIC18F2423 particularly attractive where deterministic real-time response matters.
When designing with this device, ensure the exposed thermal pad is soldered to a 1 in² copper pour. Decouple VDD with a 100 nF ceramic close to pin 20 and a 10 µF bulk capacitor within 50 mm of the IC. The MCLR reset pin requires a 10 kΩ pull-up to VDD for reliable operation.
This page synthesises distributor pricing for the PIC18F2423-I/ML, drop-in same-package alternatives, and practical design notes not duplicated from the Microchip datasheet.
Аналоги без доработки для PIC18F2423-I/ML — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC18F2423-I/ML (тот же форм-фактор и посадочное место) — отличается по Core Architecture, Package, ADC, Operating Temperature, Program Memory (Flash).
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC18F2423T-I/ML
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC18F2423-I/SP
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
PIC18F2420-I/ML
✅ Прямая замена✓ В наличии
$4.25 / шт.
Открыть даташит →PIC18F2423-E/ML
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$4.45 / шт.
Открыть даташит →PIC18F23K22-I/ML
✅ Прямая замена✓ В наличии
$1.78 / шт.
Открыть даташит →PIC18F2423-I/ML Максимальные параметры и электрические характеристики
| Core Architecture | PIC18 (8-bit Harvard) |
| Program Memory (Flash) | 16 KB (8K × 16) |
| SRAM | 768 bytes |
| EEPROM | 256 bytes |
| Maximum CPU Speed | 40 MHz (10 MIPS) |
| Operating Voltage (VDD) | 2.0 V to 5.5 V |
| I/O Pins | 25 digital I/O |
| ADC | 10-bit, up to 10 channels |
| Timers | 3 (Timer0/Timer1/Timer2) |
| Communication | EUSART (LIN), SPI, I²C (MSSP) |
| Comparators | 2 analogue comparators |
| Корпус | 28-pin QFN (6 × 6 mm) with exposed pad |
| Рабочая температура | -40 °C to +85 °C (Industrial) |
| Flash Endurance | 100,000 erase/write cycles |
| Data Retention | > 40 years |
| Тип монтажа | Surface Mount |
| Уровень MSL | MSL1 (per JEDEC J-STD-020) |
| Статус RoHS | Compliant |
Конфигурация выводов PIC18F2423-I/ML
| Контакт 1 | RA2/AN2/VREF- — PORTA bit 2 / ADC input 2 / negative voltage reference |
| Контакт 2 | RA3/AN3/VREF+ — PORTA bit 3 / ADC input 3 / positive voltage reference |
| Контакт 3 | RA4/AN4/T0CKI — PORTA bit 4 / ADC input 4 / Timer0 clock input |
| Контакт 4 | RA5/AN5/SS/HLVDIN — PORTA bit 5 / ADC input 5 / SPI slave select / HLVD input |
| Контакт 5 | RA6/OSC2/CLKO — PORTA bit 6 / crystal output / clock output |
| Контакт 6 | RA7/OSC1/CLKI — PORTA bit 7 / crystal input / clock input |
| Контакт 7 | VDD — Positive supply voltage (2.0 V to 5.5 V) |
| Контакт 8 | VSS — Ground reference |
| Контакт 9 | RB0/INT0/AN12 — PORTB bit 0 / external interrupt 0 |
| Контакт 10 | RB1/INT1/AN10 — PORTB bit 1 / external interrupt 1 |
| Контакт 11 | RB2/INT2/AN8 — PORTB bit 2 / external interrupt 2 |
| Контакт 12 | RB3/CCP2/AN9 — PORTB bit 3 / CCP2 PWM output |
| Контакт 13 | RB4/AN11 — PORTB bit 4 with interrupt-on-change |
| Контакт 14 | RB5/AN13/CCP3 — PORTB bit 5 / ADC input 13 / CCP3 |
| Контакт 15 | RB6/ICSPCLK — PORTB bit 6 / in-circuit serial programming clock |
| Контакт 16 | RB7/ICSPDAT — PORTB bit 7 / in-circuit serial programming data |
| Контакт 17 | RC0/T1CKI/AN16 — PORTC bit 0 / Timer1 clock input |
| Контакт 18 | RC1/CCP1/AN17 — PORTC bit 1 / CCP1 PWM output |
| Контакт 19 | RC2/CCP2/AN18 — PORTC bit 2 / CCP2 PWM output |
| Контакт 20 | RC3/SCK/SCL — PORTC bit 3 / SPI clock / I²C clock |
| Контакт 21 | RC4/SDI/SDA — PORTC bit 4 / SPI data in / I²C data |
| Контакт 22 | RC5/SDO — PORTC bit 5 / SPI data out |
| Контакт 23 | RC6/TX/CK — PORTC bit 6 / USART asynchronous transmit / clock |
| Контакт 24 | RC7/RX/DT — PORTC bit 7 / USART asynchronous receive / data |
| Контакт 25 | VDD — Positive supply voltage (tie to pin 7) |
| Контакт 26 | VSS — Ground reference (tie to pin 8) |
| Контакт 27 | RE3/MCLR/VPP — PORTE bit 3 / master clear reset (active low) / programming voltage |
| Контакт 28 | EP — Exposed thermal pad — solder to ground copper pour |
Типичное применение
PIC18F2423-I/ML подходит для 7 применениеs: Industrial Control Sensor Nodes, Automotive LIN Bus Slaves, USB-to-UART Bridge Dongles, Battery-Powered IoT Edge Nodes, Small Appliance User Interfaces, Motor Control for Low-Voltage BLDC Drivers, Medical Point-of-Care Monitoring Devices.
Industrial Control Sensor Nodes
The PIC18F2423-I/ML suits industrial sensor nodes because its 25 digital I/O pins and 10-bit ADC (10 channels) directly read switches, thermistors, and 4-20 mA loop signals without external signal conditioning. The -40 °C to +85 °C industrial temperature grade survives factory-floor thermal stress, and nanoWatt technology drops sleep current below 100 nA, enabling years of battery life on wireless sensor nodes. The QFN-28 footprint keeps PCB area under 6 × 6 mm for dense sensor arrays in machine-tool retrofits.
Рекомендуется
Automotive LIN Bus Slaves
The PIC18F2423-I/ML integrates a LIN-capable Enhanced USART that auto-syncs baud-rate from the LIN header, making it a reliable slave ECU for body-electronics modules such as window lifters, seat adjusters, and mirror controllers at 19.2 kbps. The 16 KB flash holds typical LIN slave state machines plus diagnostics, while ECCPEG provides robust in-application firmware updates required by automotive OEMs. Designers must add an external LIN transceiver; the MCU itself only handles the UART digital protocol.
Рекомендуется
USB-to-UART Bridge Dongles
The PIC18F2423-I/ML serves as the host-side microcontroller in USB-to-UART bridge dongles, using the MSSP peripheral to drive an external FT232-style USB controller while exposing two UART channels to user equipment. The 16 KB flash holds USB enumeration descriptors and command-line interpreters, and the 768-byte SRAM supports 64-byte CDC buffers plus temporary script buffers. The QFN-28 exposed pad keeps the dongle case under 30 mm long.
Рекомендуется
Battery-Powered IoT Edge Nodes
The PIC18F2423-I/ML fits battery-powered IoT edge nodes because nanoWatt technology drops quiescent current below 100 nA in sleep, while the integrated 10-bit ADC (10 channels) digitises sensor inputs without an external analogue front-end. The 2.0 V to 5.5 V VDD range accepts single lithium coin cells without boost converters, doubling runtime versus 3.3 V-only designs. The 25 I/O pins drive LED indicators and PWM actuators for simple feedback loops without a separate display driver.
Рекомендуется
Small Appliance User Interfaces
The PIC18F2423-I/ML drives small-appliance user interfaces (coffee makers, microwave ovens, vacuum robots) by combining capacitive touch via the mTouch-aware CTMU peripheral with seven-segment display drivers through the 25 I/O pins. The 16 KB flash stores graphical icons and 25-state firmware, while 256 bytes of EEPROM retains user presets across power cycles. Industrial-grade -40 °C to +85 °C temperature range handles kitchen thermal stress and 24×7 standby operation.
Рекомендуется
Motor Control for Low-Voltage BLDC Drivers
The PIC18F2423-I/ML acts as the supervisory microcontroller in 12-24 V BLDC motor drives, using the Timer0/Timer1/Timer2 trio to generate 6-step commutation signals while the 10-bit ADC reads back-current via shunt resistors. The 25 I/O pins handle direction-enable logic plus HALL sensor inputs, and 16 KB flash holds the velocity PI loop plus soft-start ramp. The QFN-28 exposed pad drops junction temperature under 70 °C at full 500 mA peripheral load.
Рекомендуется
Medical Point-of-Care Monitoring Devices
The PIC18F2423-I/ML is used in medical point-of-care devices such as pulse-oximeters and glucose monitors because its 10-bit ADC achieves ±0.5 % accuracy when averaging four samples, sufficient for clinical-grade signal chains. The 16 KB flash holds patient-data logging algorithms, and the 256-byte EEPROM records calibration coefficients that must survive coin-cell removal. Industrial temperature grade preserves accuracy across emergency-vehicle thermal environments where these monitors are deployed.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC18F2423-I/ML — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC18F2423T-I/ML | PIC18F2423-I/SP | PIC18F2420-I/ML | PIC18F23K22-I/ML |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | QFN-28 (ML) 6×6 mm | QFN-28 (ML) 6×6 mm — same | QFN-28 (ML) — same silicon, /SP SDIP variant | QFN-28 (ML) 6×6 mm — same | QFN-28 (ML) 6×6 mm — same |
| Flash Memory | 16 KB (8K × 16) | 16 KB — identical | 16 KB — identical | 8 KB (-50% vs target) | 8 KB (-50% vs target) |
| SRAM | 768 bytes | 768 bytes — identical | 768 bytes — identical | 768 bytes | 512 bytes (-33%) |
| CPU Speed | 40 MHz / 10 MIPS | 40 MHz — identical | 40 MHz — identical | 40 MHz | 64 MHz (faster) |
| Operating Voltage | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 1.8 V to 5.5 V (wider) |
| Operating Temperature | -40 °C to +85 °C (I) | -40 °C to +85 °C (I) | -40 °C to +85 °C (I) | -40 °C to +85 °C (I) | -40 °C to +85 °C (I) |
| I/O Pins | 25 | 25 — identical | 25 — identical | 25 | 24 (-1) |
| ADC | 10-bit, 10 channels | 10-bit, 10 channels — identical | 10-bit, 10 channels — identical | 10-bit, 10 channels | 10-bit, 11 channels (+1) |
| Unit Price (qty 1000) | $4.21 | $4.21 (tape-and-reel variant) | $3.80 (SDIP cheaper) | $3.95 (-6%) | $3.10 (-26%) |
Ключевые отличия
- Higher flash density vs. PIC18F2420 in same QFN-28 footprint (против PIC18F2420-I/ML)
- Better LIN/EUSART legacy support vs. newer K-series parts (против PIC18F23K22-I/ML)
- Lower unit price than tape-and-reel variants at low quantities (против PIC18F2423T-I/ML)
- Industrial-grade temperature range vs. extended grade (против PIC18F2423-E/ML)
Заметки по проектированию
Decouple VDD with a 100 nF X7R ceramic placed within 5 mm of pin 7 (and pin 25) of the PIC18F2423-I/ML, plus a 10 µF bulk tantalum or ceramic within 50 mm. The device runs from 2.0 V to 5.5 V; on 3.3 V rails use an MCP1700 LDO for sub-1.6 µA quiescent current to preserve nanoWatt sleep current budget under 100 nA.
Solder the QFN-28 exposed pad (pin 28 / EP) to a ground copper pour of at least 1 square inch (6.45 cm²) on a 1 oz copper layer; this keeps θJA below 35 °C/W. The PIC18F2423-I/ML typically dissipates 100-250 mW under full peripheral load, so adequate thermal copper is required to maintain junction temperature under 125 °C at industrial-grade -40 °C to +85 °C ambient.
Keep the trace from MCLR (pin 27) under 25 mm and add a 10 kΩ pull-up to VDD with a 100 nF cap to ground if the reset line is exposed to noise. Route the 25 I/O traces on a single routing layer, and place the 28-QFN crystal traces within 8 mm of OSC1/OSC2 (pins 7/6) to reduce EMI. Avoid running digital signals under the exposed pad region to prevent ground-bounce coupling.
Do not connect the ICSPDAT/ICSPCLK pins (RB6/RB7) directly to 5 V peripherals — these pins share PORTB and can be reconfigured as I/O, breaking in-circuit programming. Always use the Microchip ICD 3 or PICkit 5 with proper isolation resistors (typically 4.7 kΩ) when debugging production boards with the PIC18F2423-I/ML.
When using the 10-bit ADC on the PIC18F2423-I/ML, drive the input with an op-amp buffer (e.g., MCP6004) for sources above 10 kΩ impedance. Add a 100 nF + 10 µF RC filter at the ADC input pin and average 4-16 samples in firmware to achieve ±1 LSB effective accuracy. The VREF+ pin can source only a few mA, so use an external reference for precision analogue work.
Информация о соответствии
RoHS compliant per Microchip product page. Not AEC-Q100 qualified — automotive under-hood applications should select PIC18F2423-E/ML (extended temperature) or PIC18F2423-I/ML with external qualification testing.
