PIC18F25K40-E/SO - 8-Bit MCU, 32KB Flash, 28-Pin SOIC | Microchip
Артикул: PIC18F25K40-E/SO ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $2.45 | $2,45 |
| 10 | $2.2 | $22,00 |
| 100 | $1.85 | $185,00 |
| 500 | $1.55 | $775,00 |
| 1.000 | $1.32 | $1.320,00 |
PIC18F25K40-E/SO Обзор
An 8-bit microcontroller (MCU) is a single-chip computer that combines a CPU, memory (Flash/ROM, RAM, EEPROM), and integrated peripherals on a single silicon die. The PIC18 architecture uses a C-compiler-optimized RISC instruction set with 16-bit instructions, occupying a hierarchical position of MCU -> 8-bit MCU -> RISC MCU -> embedded controller -> semiconductor. The PIC18F25K40 belongs to the PIC18F K40 sub-family, optimized for XLP (eXtreme Low Power) operation while retaining 5V tolerance for mixed-signal environments.
Key features include Core Independent Peripherals such as the Complementary Waveform Generator (CWG), Windowed Watchdog Timer (WWDT), CRC/SCAN memory integrity checking, a 10-bit ADC with computation, a 5-bit DAC, and configurable logic cells. The device operates from 3.0V to 5.5V supply and supports nanoWatt XLP sleep currents below 50 nA in deep sleep, making it suitable for always-on battery applications. The integrated peripheral set reduces external component count.
Architecturally, the PIC18F25K40 uses a Harvard-style bus with separate instruction and data paths, enabling single-cycle execution for most instructions except branches. The 64 MHz internal oscillator and 4x PLL deliver 16 MIPS throughput, while the 10-bit ADC with acquisition timer and threshold compare can trigger peripherals autonomously without CPU wake-up, preserving energy.
Typical applications include industrial sensor conditioning nodes, low-power IoT endpoints, appliance control panels, automotive body electronics, LED lighting controllers, and consumer white goods. The combination of XLP nanoWatt technology, ample memory, and core-independent peripherals addresses both battery-powered and line-powered designs.
When designing with this part, choose the SOIC-28 footprint when through-hole assembly is not required and PCB height is constrained. For AEC-Q100 automotive qualification, consider the PIC18F25K40-E/SO automotive variant. Plan for ICSP programming header access on the PCB.
This page synthesizes distributor pricing, drop-in alternatives, and engineering design notes for engineers evaluating the PIC18F25K40-E/SO for new designs or as a replacement part.
Аналоги без доработки для PIC18F25K40-E/SO — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC18F25K40-E/SO (тот же форм-фактор и посадочное место) — отличается по ADC, Program Memory (Flash), Package, DAC, Supply Voltage (VDD).
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC18F25K40-I/SO
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC18F25K40T-I/SO
✅ Прямая замена✓ В наличии
$1.6 / шт.
Открыть даташит →PIC18F24K40-E/SO
✅ Прямая замена✓ В наличии
$1.2 / шт.
Открыть даташит →PIC18F25K40-E/SS
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$1.89 / шт.
Открыть даташит →PIC18F25K22-I/SO
✅ Прямая замена✓ В наличии
$1.78 / шт.
Открыть даташит →PIC18F25K20-I/SO
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$2.55 / шт.
Открыть даташит →PIC18F25K40-E/SO Максимальные параметры и электрические характеристики
| CPU Core | PIC18 (8-bit RISC) |
| Program Memory (Flash) | 32 KB |
| Data SRAM | 2 KB (2048 bytes) |
| Data EEPROM | 256 bytes |
| Максимальная тактовая частота | 64 MHz |
| CPU Speed (MIPS) | 16 MIPS |
| Supply Voltage Range | 3.0 V to 5.5 V |
| Диапазон рабочих температур | -40 C to +125 C (E = Extended) |
| ADC | 10-bit ADC2 (with computation) |
| DAC | 5-bit DAC |
| Package Type | SOIC-28 (SO, 300 mil wide body) |
| Тип монтажа | Surface Mount |
| Communication Interfaces | UART, I2C, SPI, EUSART |
| Core Independent Peripherals | CWG, WWDT, CRC/SCAN, CLC |
| Low-Power Technology | nanoWatt XLP |
| Статус RoHS | Compliant |
| Уровень MSL | 1 |
Конфигурация выводов PIC18F25K40-E/SO
| Контакт 1 | RA0/ANA0/C1IN0-/C2IN0-/C3IN0-/C4IN0-/C5IN0-/C6IN0-/C7IN0-/C8IN0-/U1CTSR — Bidirectional I/O / analog input / comparator input / UART1 clear-to-send |
| Контакт 2 | RA1/ANA1/C1IN1-/C2IN1-/C3IN1-/C4IN1-/C5IN1-/C6IN1-/C7IN1-/C8IN1-/U1RXR — Bidirectional I/O / analog input / comparator input / UART1 RX |
| Контакт 3 | RA2/ANA2/C1IN0+/C2IN0+/C3IN0+/C4IN0+/C5IN0+/C6IN0+/C7IN0+/C8IN0+/VREF-/ZCD — Bidirectional I/O / analog input / comparator positive / VREF- / zero-cross detect |
| Контакт 4 | RA3/ANA3/C1IN1+/C2IN1+/C3IN1+/C4IN1+/C5IN1+/C6IN1+/C7IN1+/C8IN1+/VREF+ — Bidirectional I/O / analog input / comparator positive / VREF+ |
| Контакт 5 | RA4/ANA4/C1OUT/SRCLK/T0CKI — Bidirectional I/O / analog input / comparator output / SR latch clock / Timer0 clock |
| Контакт 6 | RA5/ANA5/MCLR — Bidirectional I/O / analog input / Master Clear (reset) input |
| Контакт 7 | RA6/ANA6/OSC2/CLKOUT — Bidirectional I/O / analog input / oscillator output / clock output |
| Контакт 8 | RA7/ANA7/OSC1/CLKIN — Bidirectional I/O / analog input / oscillator input / external clock in |
| Контакт 9 | VSS — Ground reference |
| Контакт 10 | VDD — Positive supply voltage (3.0V to 5.5V) |
| Контакт 11 | RB0/ZCD1/ANB0/C2IN1+/CWG1IN1/CCP4/INT0 — Bidirectional I/O / ZCD input / analog input / comparator positive / CWG input / CCP4 / external interrupt 0 |
| Контакт 12 | RB1/ANB1/C1IN3-/C2IN3-/C3IN1+/C4IN1+/C5IN1+/C6IN1+/C7IN1+/C8IN1+/SCL1/SCK1 — Bidirectional I/O / analog input / comparator input / I2C1 SCL / SPI1 SCK |
| Контакт 13 | RB2/ANB2/C1IN2-/C2IN2-/C3IN2-/C4IN2-/C5IN2-/C6IN2-/C7IN2-/C8IN2-/SDA1/SDI1 — Bidirectional I/O / analog input / comparator input / I2C1 SDA / SPI1 SDI |
| Контакт 14 | RB3/ANB3/C1IN0-/C2IN0-/C3IN0-/C4IN0-/C5IN0-/C6IN0-/C7IN0-/C8IN0-/PWM4/SS1 — Bidirectional I/O / analog input / comparator input / PWM4 / SPI1 SS |
| Контакт 15 | RB4/ANB4/C2IN1-/C3IN1-/C4IN1-/C5IN1-/C6IN1-/C7IN1-/C8IN1-/PWM5 — Bidirectional I/O / analog input / comparator input / PWM5 |
| Контакт 16 | RB5/ANB5/C1IN2+/C2IN2+/C3IN0+/C4IN0+/C5IN0+/C6IN0+/C7IN0+/C8IN0+/PWM6 — Bidirectional I/O / analog input / comparator positive / PWM6 |
| Контакт 17 | RB6/ANB6/ICSPCLK — Bidirectional I/O / analog input / ICSP clock |
| Контакт 18 | RB7/ANB7/ICSPDAT — Bidirectional I/O / analog input / ICSP data |
| Контакт 19 | RC0/ANC0/CWG1IN0 — Bidirectional I/O / analog input / CWG input 0 |
| Контакт 20 | RC1/ANC1/CWG1FLT — Bidirectional I/O / analog input / CWG fault input |
| Контакт 21 | RC2/ANC2/C3IN1-/C4IN1-/C5IN1-/C6IN1-/C7IN1-/C8IN1-/PWM7 — Bidirectional I/O / analog input / comparator input / PWM7 |
| Контакт 22 | RC3/ANC3/C1IN3-/C2IN3-/C3IN2-/C4IN2-/C5IN2-/C6IN2-/C7IN2-/C8IN2-/PWM8 — Bidirectional I/O / analog input / comparator input / PWM8 |
| Контакт 23 | RC4/ANC4/C3IN3-/C4IN3-/C5IN3-/C6IN3-/C7IN3-/C8IN3-/CCP2 — Bidirectional I/O / analog input / comparator input / CCP2 |
| Контакт 24 | RC5/ANC5/C3IN1+/C4IN1+/C5IN1+/C6IN1+/C7IN1+/C8IN1+/CCP1 — Bidirectional I/O / analog input / comparator positive / CCP1 |
| Контакт 25 | RC6/ANC6/C3IN2+/C4IN2+/C5IN2+/C6IN2+/C7IN2+/C8IN2+/CCP3/TX1/CK1 — Bidirectional I/O / analog input / comparator positive / CCP3 / UART1 TX |
| Контакт 26 | RC7/ANC7/C3IN0+/C4IN0+/C5IN0+/C6IN0+/C7IN0+/C8IN0+/RX1/DT1 — Bidirectional I/O / analog input / comparator positive / UART1 RX |
| Контакт 27 | VSS — Ground reference |
| Контакт 28 | VDD — Positive supply voltage (3.0V to 5.5V) |
Типичное применение
PIC18F25K40-E/SO подходит для 7 применениеs: Industrial Sensor Conditioning Nodes, Low-Power IoT Endpoints, Appliance Control Panels, LED Lighting Controllers, Automotive Body Electronics, Consumer White Goods, Portable Medical Monitoring Devices.
Industrial Sensor Conditioning Nodes
The PIC18F25K40-E/SO suits industrial 4-20 mA sensor conditioning nodes where its 10-bit ADC2 with computation and 5-bit DAC enable local signal processing without external components. With 32 KB Flash and 2 KB SRAM, the MCU can run Modbus RTU stacks, sensor linearization, and self-calibration routines. The 3.0V-5.5V supply range integrates directly into 24V-bus-derived 5V rails. nanoWatt XLP sleep currents below 50 nA extend battery life in remote wireless sensor transmitters deployed in field instrumentation.
Рекомендуется
Low-Power IoT Endpoints
Battery-powered IoT endpoints benefit from the PIC18F25K40-E/SO's nanoWatt XLP technology, with deep-sleep currents below 50 nA enabling multi-year coin-cell operation. The integrated EUSART supports direct interfacing with LoRa, Sub-GHz, and Bluetooth Low Energy modules. The 10-bit ADC2 with hardware averaging and threshold compare can wake the CPU only when sensor values exceed programmed limits, drastically reducing average power consumption. The 256-byte EEPROM stores configuration and network credentials without battery backup.
Рекомендуется
Appliance Control Panels
The PIC18F25K40-E/SO drives washing machine, dishwasher, and oven user-interface panels where its 28-pin SOIC footprint provides ample I/O for keypad scanning, 7-segment or LCD display driving, and relay control. The Complementary Waveform Generator (CWG) simplifies inverter-style motor control and zero-cross TRIAC triggering without CPU load. With 32 KB Flash and 2 KB SRAM, the device runs state-machine-based UI firmware, fault detection, and serial diagnostics on a single 5V supply without auxiliary logic.
Рекомендуется
LED Lighting Controllers
The PIC18F25K40-E/SO is well-suited for digital-addressable LED lighting controllers (WS2812B, APA102) where its DMA-free CCP and CWG peripherals generate precise timing waveforms. The 10-bit ADC reads ambient light sensors for daylight harvesting, while the 5-bit DAC provides smooth dimming curves via PWM-filtered analog output. The 64 MHz core runs WS2812B bit-banging protocols at 800 kbps while servicing DMX512 or DALI input parsers, all within the 32 KB Flash envelope.
Рекомендуется
Automotive Body Electronics
Inside-cabin automotive body modules such as seat controllers, mirror adjusters, and HVAC blend-door actuators use the PIC18F25K40-E/SO for its 5V tolerance and -40 C to +125 C extended temperature range. The PIC18F K40 family is well-known for automotive applications, supporting LIN bus via the EUSART and direct MOSFET half-bridge driving through the CWG. The CRC/SCAN peripheral detects Flash corruption in safety-relevant functions, and the WWDT provides ASIL-A-grade system supervision.
Рекомендуется
Consumer White Goods
Refrigerators, microwave ovens, and coffee machines deploy the PIC18F25K40-E/SO as the main user-interface controller, taking advantage of its 5V tolerance to interface directly with triac-driving optocouplers and 7-segment LED displays. The 32 KB Flash stores multilingual UI strings, brewing profiles, and fault logs in the 256-byte EEPROM. The Core Independent Peripherals run capacitive touch sensing via the ADC2 with computation and hardware CVD, eliminating dedicated touch ICs in mid-range appliance designs.
Рекомендуется
Portable Medical Monitoring Devices
Battery-powered pulse oximeters, glucose meters, and portable ECG monitors leverage the PIC18F25K40-E/SO's nanoWatt XLP sleep modes and 10-bit ADC2 with computation to achieve weeks-long battery life. The DMA-free CCP modules generate precision timing for SpO2 LED drivers, while the CWG produces isolated transformer drive waveforms for the high-voltage stimulation circuits. Hardware CRC/SCAN validates Flash integrity for medical device firmware reliability, and the 256-byte EEPROM stores patient calibration data securely.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC18F25K40-E/SO — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC18F25K40-I/SO | PIC18F25K40T-I/SO | PIC18F24K40-E/SO | PIC18F25K22-I/SO |
|---|---|---|---|---|---|
| Package | SOIC-28 | SOIC-28 - same | SOIC-28 - same | SOIC-28 - same | SOIC-28 - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Core | PIC18 (8-bit RISC) | PIC18 (8-bit RISC) | PIC18 (8-bit RISC) | PIC18 (8-bit RISC) | PIC18 (8-bit RISC) |
| Flash Memory | 32 KB | 32 KB | 32 KB | 16 KB | 32 KB |
| SRAM | 2 KB | 2 KB | 2 KB | 1 KB | 1.5 KB |
| EEPROM | 256 bytes | 256 bytes | 256 bytes | 256 bytes | 256 bytes |
| Max Clock Frequency | 64 MHz | 64 MHz | 64 MHz | 64 MHz | 64 MHz |
| Operating Voltage | 3.0V to 5.5V | 3.0V to 5.5V | 3.0V to 5.5V | 3.0V to 5.5V | 2.3V to 5.5V |
| Temperature Range | -40C to +125C (E) | -40C to +85C (I) | -40C to +85C (I) | -40C to +125C (E) | -40C to +85C (I) |
| Core Independent Peripherals | CWG, WWDT, CRC/SCAN, CLC | CWG, WWDT, CRC/SCAN, CLC | CWG, WWDT, CRC/SCAN, CLC | CWG, WWDT, CRC/SCAN, CLC | No CLC, older ECCP |
| Unit Price (1000+ qty) | $1.32 | $1.30 | $1.32 | $1.25 | $1.28 |
Ключевые отличия
- Extended -40C to +125C temperature grade with same silicon die as industrial -I variant (против PIC18F25K40-I/SO)
- 16 KB less Flash than K40 but pin-compatible K40 family member (против PIC18F24K40-E/SO)
- Newer Core Independent Peripherals (CLC, CWG, CRC/SCAN) versus older K22 family (против PIC18F25K22-I/SO)
- Wider 3.0V-5.5V supply range with 5V tolerance on I/O (против PIC18F25K22-I/SO)
Заметки по проектированию
The PIC18F25K40-E/SO supports nanoWatt XLP sleep modes with currents below 50 nA in deep sleep with RTCC enabled. For battery-powered designs, place a 100 nF ceramic decoupling capacitor within 3 mm of each VDD pin (pin 10 and pin 28), and a bulk 10 uF tantalum or ceramic capacitor near the supply input. The internal BOR and POR handle slow-rising supplies gracefully, but a 100 ohm series resistor with 1 uF bypass on MCLR pin 6 prevents in-circuit reset glitches during hot-plug events.
For SOIC-28 layouts, route all 28 signals on a single PCB layer if possible, with a continuous ground plane on the adjacent layer. Keep the ICSP lines (RB6/ICSPCLK pin 17 and RB7/ICSPDAT pin 18) accessible via a 2x3 0.1-inch header for production programming and debugging. Add test vias on the MCLR line (pin 6) for in-circuit reset. Estimated: SOIC-28 land pattern per IPC-7351 with 1.27 mm pitch requires approximately 10.3 x 7.5 mm pad area including thermal relief.
When using the 10-bit ADC2 with computation, place the analog reference capacitor (0.1 uF) directly on the VREF+ pin (RA3, pin 4) within 5 mm. Avoid routing digital switching signals (PWM, SPI CLK) parallel to analog inputs (RA0-RA7, RB0-RB5, RC0-RC7) on the same layer. Use a ground guard ring around sensitive analog traces, and keep the ADC acquisition time at minimum 1 us per the K40 datasheet AC characteristics for full 10-bit accuracy.
Do not exceed the absolute maximum ratings of 6.5V on VDD or expose any I/O pin beyond -0.3V to VDD+0.3V; the PIC18F25K40-E/SO is NOT 5V tolerant on digital I/O when VDD is below 5V. Always configure unused I/O pins as outputs with logic low to minimize current consumption, never leave them floating. For ICSP programming, ensure MCLR is pulled to VDD through a 10 kohm resistor during normal operation - if left floating, the device may enter unintended reset states.
Place the 16 MHz external crystal (if used) within 5 mm of pins 7 (OSC1/RA7) and 8 (OSC2/RA6), with a solid ground plane beneath it. Use 22-33 pF load capacitors per crystal manufacturer datasheet, referenced to the local analog ground island. Keep high-frequency signals (SPI, UART) away from the XTAL traces. Estimated: Total oscillator trace length should be kept under 10 mm to minimize parasitic capacitance and EMI susceptibility.
Информация о соответствии
RoHS compliant per Microchip product page. Industrial /E temperature grade does not require AEC-Q100; for AEC-Q100 qualified automotive variants consult Microchip's automotive-grade PIC18 portfolio.
