PIC24EP64MC202-E/MM - 60MHz 64KB Motor MCU | Microchip
Артикул: PIC24EP64MC202-E/MM ✓ АктивенPIC24EP64MC202-E/MM Обзор
A microcontroller is a programmable semiconductor that combines a processor core, memory, and dedicated peripherals on one device. Within the broader embedded-control hierarchy, the PIC24EP64MC202 belongs to the PIC24E family of 16-bit flash microcontrollers, the motor-control MCU class, and ultimately the embedded semiconductor category. Its specialized peripherals reduce the external circuitry needed for motor-drive, sensing, and feedback-control designs.
Key features include an MCPWM peripheral, quadrature encoder interface, three internal operational amplifiers, four comparators, a PTG peripheral, and communication interfaces identified for I2C, IrDA, LIN, SPI, UART, and USART operation. The device provides 64 KB of Flash memory and 8 KB of SRAM. According to the Microchip product page, the PIC24E motor-control MCU family is designed for high-performance, precision motor control with improved energy efficiency, quieter operation, and a long operating-life profile.
The 16-bit architecture and 60 MHz clock provide dedicated processing capacity for motor algorithms, current sensing, speed measurement, and fault handling. Four comparators and three internal op amps support signal conditioning, threshold detection, and feedback-loop implementation, reducing reliance on discrete analog components. The target operates from 3 V to 3.6 V, making it appropriate for embedded 3.3 V control systems with regulated supply rails.
Typical applications include brushless DC motor controllers, servo drives, two-phase and three-phase power converters, industrial automation modules, and energy-efficient appliance drive systems. The combination of MCPWM, encoder support, internal analog blocks, and multiple serial interfaces enables a compact control architecture for compact motor-control designs.
PCB design should account for the 28-pin QFN-S footprint, exposed-pad thermal management, clean analog grounding, and separation between power-stage switching nodes and sensitive control signals. Decoupling capacitors must be placed close to the supply pins, while programming and debug access should be verified against the Microchip pin-description table before layout release.
This product page combines the manufacturer’s device description with distributor specifications, package information, replacement analysis, and practical design guidance. It helps engineers distinguish the E/MM temperature-grade variant from other PIC24EP64MC202 package options and assess whether the integrated motor-control and analog resources fit a specific embedded design.
Аналоги без доработки для PIC24EP64MC202-E/MM — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC24EP64MC202-E/MM (тот же форм-фактор и посадочное место) — отличается по Package, Encoder Interface, Motor-Control PWM.
PIC24EP64MC202-I/MM
✅ Прямая заменаУточнить цену
Открыть даташит →PIC24EP64MC202-E/MM Максимальные параметры и электрические характеристики
| Product Type | 16-bit flash motor-control microcontroller |
| Maximum Clock Speed | 60 MHz |
| Flash Program Memory | 64 KB |
| Program Memory Organization | 22K × 24 words |
| SRAM | 8 KB |
| Напряжение питания | 3 V to 3.6 V |
| Data Bus | 8-bit |
| I/O Ports | 83 |
| Motor-Control PWM | MCPWM peripheral |
| Encoder Interface | QEI peripheral |
| Internal Operational Amplifiers | 3 |
| Internal Comparators | 4 |
| Peripheral Timer | PTG peripheral |
| Serial Interfaces | I2C, IrDA, LIN, SPI, UART, and USART |
| Корпус | 28-pin QFN-S, 6 mm × 6 mm |
| Тип монтажа | Surface mount |
Руководство по цоколевке PIC24EP64MC202-E/MM в корпусе 28-pin qfn-s, 6 mm × 6 mm
Цоколевка для PIC24EP64MC202-E/MM (корпус 28-pin qfn-s, 6 mm × 6 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для PIC24EP64MC202-E/MM.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
PIC24EP64MC202-E/MM подходит для 6 применениеs: Brushless DC Motor Controller, Servo Drive and Position Control, Two-Phase BLDC Power Converter, Industrial Automation Motor Axis, Energy-Efficient Appliance Drive, Precision Analog Feedback Control.
Brushless DC Motor Controller
The PIC24EP64MC202-E/MM fits compact brushless DC motor controllers because its 16-bit core operates up to 60 MHz while the integrated MCPWM provides dedicated motor-pwm resources. The QEI block supports rotor-position feedback from encoder signals, and three internal op amps plus four comparators can assist current sensing and protection thresholds. This integration reduces external analog circuitry and keeps control timing close to the switching hardware. Designers should still scale the PWM outputs for the selected gate drivers, validate current limits, and keep high-current switching paths physically separated from the MCU and analog ground network.
Рекомендуется
Servo Drive and Position Control
The PIC24EP64MC202-E/MM is appropriate for servo and position-control loops that need deterministic computation alongside integrated motor peripherals. Its 60 MHz maximum clock supports control-algorithm execution, while QEI accepts quadrature position feedback and MCPWM generates the required motor-drive waveform. Four comparators can assist limit detection and three op amps can support analog feedback conditioning, reducing the component count of a discrete control board. For a production servo module, validate encoder filtering, fault-response timing, and the thermal performance of the exposed-pad footprint under repeated acceleration and braking loads.
Рекомендуется
Two-Phase BLDC Power Converter
A two-phase brushless converter can use the PIC24EP64MC202-E/MM as its digital controller because MCPWM, comparators, and internal op amps cover the principal motor-control functions in one device. The 64 KB Flash capacity supports control firmware and parameter tables, while 8 KB SRAM provides working space for control calculations and communication buffers. The 3 V to 3.6 V supply range fits a regulated 3.3 V control domain, but the converter’s high-voltage power stage must remain electrically separated. Confirm gate-drive levels, fault-shutdown behavior, current-sense limits, and exposed-pad heat spreading before production release.
Рекомендуется
Industrial Automation Motor Axis
The PIC24EP64MC202-E/MM is suitable for a compact industrial motor axis when its 60 MHz 16-bit processing capability, QEI position input, and multiple serial interfaces are sufficient for the control architecture. I2C, SPI, UART, USART, LIN, and IrDA support allow the controller to connect to sensors, service interfaces, and higher-level automation electronics. The 64 KB Flash and 8 KB SRAM support embedded control code and communication buffering without an external memory bus. Select the I/MM grade when industrial environmental qualification is required, and validate isolation, EMC, and fault-safe shutdown requirements at the system level.
Рекомендуется
Energy-Efficient Appliance Drive
PIC24EP64MC202-E/MM can control compact appliance motors where efficiency, acoustic behavior, and component count drive the architecture. The motor-specific MCPWM and encoder interface support precise commutation and speed control, while the internal analog resources can reduce the number of external signal-conditioning components. Its 3.3 V operating range integrates naturally with a regulated low-voltage control section. In a fan, pump, or mixed motor appliance, validate standby behavior, brownout recovery, thermal performance, and the relationship between switching losses and controller quiescent demand before choosing heat-management provisions.
Рекомендуется
Precision Analog Feedback Control
The PIC24EP64MC202-E/MM can implement compact analog-feedback loops because three internal op amps and four comparators provide dedicated analog resources alongside the 16-bit controller. These blocks can support current, temperature, or position feedback conditioning while the MCU executes supervisory and motor-control algorithms. The 60 MHz clock provides processing margin for filtering, compensation, diagnostics, and communications. Because integrated analog characteristics still depend on operating conditions, evaluate offset, noise, settling, input range, and output-drive requirements against the actual feedback network, and provide grounding and filtering that prevent motor-switching noise from corrupting the measured signal.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC24EP64MC202-E/MM — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC24EP64MC202-I/MM |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 28-pin QFN-S, 6 mm × 6 mm | 28-pin QFN-S, 6 mm × 6 mm |
| Architecture | 16-bit | 16-bit |
| Listed Performance | 60 MIPS | 70 MIPS |
| Maximum Clock Speed | 60 MHz | 60 MHz |
| Flash Program Memory | 64 KB | 64 KB |
| SRAM | 8 KB | 8 KB |
| Supply Voltage | 3 V to 3.6 V | 3 V to 3.6 V |
| Motor-Control Resources | MCPWM and QEI | MCPWM and QEI |
| Internal Analog Resources | 3 op amps and 4 comparators | 3 op amps and 4 comparators |
| Temperature Grade | E grade | I grade |
| Lifecycle Status | Active | Active |
Ключевые отличия
- Directly integrated motor-control and analog resources (против PIC24EP64MC202-I/MM)
- Compact 6 mm × 6 mm QFN-S footprint (против PIC24EP64MC202-E/SO)
- Dedicated 64 KB flash and 8 KB SRAM configuration (против PIC24EP64MC202-I/MM)
Заметки по проектированию
Use the manufacturer’s 28-pin QFN-S land pattern and exposed-pad recommendations without relocating the pad to accommodate a generic QFN footprint. Place input and output decoupling capacitors close to their associated supply pins, keep the exposed-pad connection unobstructed, and avoid routing motor-switching nets beneath the MCU. This arrangement reduces supply transients and prevents high-amplitude switching voltage from coupling into sensitive control or analog signals.
Design the controller supply for a regulated 3.3 V rail within the 3 V to 3.6 V operating range. Check the required MCPWM duty cycle, communication activity, analog-block usage, and ambient temperature when sizing regulator headroom. The motor power stage should use its own appropriately rated supply and protection, while the MCU rail receives local high-frequency bypassing to isolate digital switching activity.
Route the QEI inputs and analog feedback away from motor-switching nodes and provide filtering appropriate to the sensed bandwidth. The three internal op amps and four comparators simplify the feedback network, but their performance still depends on grounding, reference stability, and input levels. Check each analog signal against the applicable operating range and validate the assembled board with the motor stage energized to identify switching-noise coupling.
Do not treat PIC24EP64MC202-I/MM as an unrestricted substitute without reviewing its I-grade temperature requirements and the difference between the listed 70 MIPS and 60 MIPS identifiers. Also avoid assuming that the 28-pin SOIC variant is footprint-compatible with the E/MM QFN-S package. Programming, boot, and peripheral assignments should also be checked against the selected ordering code before a production substitution is released.
Информация о соответствии
The device is listed with an active lifecycle status, but RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations are not stated in the cited product information.