Microchip Technology

PIC24EP64MC202-E/MM - 60MHz 64KB Motor MCU | Microchip

MPN: PIC24EP64MC202-E/MM ✓ فعال
3 V to 3.6 V Vdss 28-pin QFN-S, 6 mm × 6 mm Package 60 MHz Speed 64 KB Memory
MOQ: 1 |

PIC24EP64MC202-E/MM جائزہ

The Microchip Technology PIC24EP64MC202-E/MM is a 16-bit PIC24E motor-control microcontroller with a 60 MHz maximum clock, 64 KB of Flash program memory, and 8 KB of SRAM in a 28-pin QFN-S 6 mm × 6 mm package. It integrates motor-control and analog resources suited to compact, energy-efficient power conversion and precision motion-control systems.

A microcontroller is a programmable semiconductor that combines a processor core, memory, and dedicated peripherals on one device. Within the broader embedded-control hierarchy, the PIC24EP64MC202 belongs to the PIC24E family of 16-bit flash microcontrollers, the motor-control MCU class, and ultimately the embedded semiconductor category. Its specialized peripherals reduce the external circuitry needed for motor-drive, sensing, and feedback-control designs.

Key features include an MCPWM peripheral, quadrature encoder interface, three internal operational amplifiers, four comparators, a PTG peripheral, and communication interfaces identified for I2C, IrDA, LIN, SPI, UART, and USART operation. The device provides 64 KB of Flash memory and 8 KB of SRAM. According to the Microchip product page, the PIC24E motor-control MCU family is designed for high-performance, precision motor control with improved energy efficiency, quieter operation, and a long operating-life profile.

The 16-bit architecture and 60 MHz clock provide dedicated processing capacity for motor algorithms, current sensing, speed measurement, and fault handling. Four comparators and three internal op amps support signal conditioning, threshold detection, and feedback-loop implementation, reducing reliance on discrete analog components. The target operates from 3 V to 3.6 V, making it appropriate for embedded 3.3 V control systems with regulated supply rails.

Typical applications include brushless DC motor controllers, servo drives, two-phase and three-phase power converters, industrial automation modules, and energy-efficient appliance drive systems. The combination of MCPWM, encoder support, internal analog blocks, and multiple serial interfaces enables a compact control architecture for compact motor-control designs.

PCB design should account for the 28-pin QFN-S footprint, exposed-pad thermal management, clean analog grounding, and separation between power-stage switching nodes and sensitive control signals. Decoupling capacitors must be placed close to the supply pins, while programming and debug access should be verified against the Microchip pin-description table before layout release.

This product page combines the manufacturer’s device description with distributor specifications, package information, replacement analysis, and practical design guidance. It helps engineers distinguish the E/MM temperature-grade variant from other PIC24EP64MC202 package options and assess whether the integrated motor-control and analog resources fit a specific embedded design.

کے لیے ڈراپ اِن متبادل PIC24EP64MC202-E/MM — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC24EP64MC202-E/MM (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Encoder Interface, Motor-Control PWM.

Microchip Technology
Package: 28-pin QFN-S (6x6 mm) with exposed pad
Microchip Technology
Package: 28-QFN-S (6 x 6 mm)
Encoder Interface: QEI
Motor-Control PWM: MCPWM

PIC24EP64MC202-I/MM

✅ ڈراپ-اِن
Microchip Technology
📦 QFN-S-28 (6x6 mm)
16-bit · 70 MIPS · 60 MHz · 8 bit · 64 KB Flash (22K x 24) · 8 KB · 3.0 V to 3.6 V · 28-QFN-S (6 x 6 mm)

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

PIC24EP64MC202-E/MM زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Product Type 16-bit flash motor-control microcontroller
Maximum Clock Speed 60 MHz
Flash Program Memory 64 KB
Program Memory Organization 22K × 24 words
SRAM 8 KB
سپلائی وولٹیج 3 V to 3.6 V
Data Bus 8-bit
I/O Ports 83
Motor-Control PWM MCPWM peripheral
Encoder Interface QEI peripheral
Internal Operational Amplifiers 3
Internal Comparators 4
Peripheral Timer PTG peripheral
Serial Interfaces I2C, IrDA, LIN, SPI, UART, and USART
پیکیج 28-pin QFN-S, 6 mm × 6 mm
ماؤنٹنگ ٹائپ Surface mount

PIC24EP64MC202-E/MM 28-pin qfn-s, 6 mm × 6 mm پن کنفیگریشن گائیڈ

PIC24EP64MC202-E/MM (28-pin qfn-s, 6 mm × 6 mm پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔

PIC24EP64MC202-E/MM کے لیے 28-pin qfn-s, 6 mm × 6 mm پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں PIC24EP64MC202-E/MM.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

PIC24EP64MC202-E/MM کے لیے موزوں ہے 6 ایپلیکیشنs: Brushless DC Motor Controller, Servo Drive and Position Control, Two-Phase BLDC Power Converter, Industrial Automation Motor Axis, Energy-Efficient Appliance Drive, Precision Analog Feedback Control.

⚡

Brushless DC Motor Controller

The PIC24EP64MC202-E/MM fits compact brushless DC motor controllers because its 16-bit core operates up to 60 MHz while the integrated MCPWM provides dedicated motor-pwm resources. The QEI block supports rotor-position feedback from encoder signals, and three internal op amps plus four comparators can assist current sensing and protection thresholds. This integration reduces external analog circuitry and keeps control timing close to the switching hardware. Designers should still scale the PWM outputs for the selected gate drivers, validate current limits, and keep high-current switching paths physically separated from the MCU and analog ground network.

🏭

Servo Drive and Position Control

The PIC24EP64MC202-E/MM is appropriate for servo and position-control loops that need deterministic computation alongside integrated motor peripherals. Its 60 MHz maximum clock supports control-algorithm execution, while QEI accepts quadrature position feedback and MCPWM generates the required motor-drive waveform. Four comparators can assist limit detection and three op amps can support analog feedback conditioning, reducing the component count of a discrete control board. For a production servo module, validate encoder filtering, fault-response timing, and the thermal performance of the exposed-pad footprint under repeated acceleration and braking loads.

🔧

Two-Phase BLDC Power Converter

A two-phase brushless converter can use the PIC24EP64MC202-E/MM as its digital controller because MCPWM, comparators, and internal op amps cover the principal motor-control functions in one device. The 64 KB Flash capacity supports control firmware and parameter tables, while 8 KB SRAM provides working space for control calculations and communication buffers. The 3 V to 3.6 V supply range fits a regulated 3.3 V control domain, but the converter’s high-voltage power stage must remain electrically separated. Confirm gate-drive levels, fault-shutdown behavior, current-sense limits, and exposed-pad heat spreading before production release.

🏭

Industrial Automation Motor Axis

The PIC24EP64MC202-E/MM is suitable for a compact industrial motor axis when its 60 MHz 16-bit processing capability, QEI position input, and multiple serial interfaces are sufficient for the control architecture. I2C, SPI, UART, USART, LIN, and IrDA support allow the controller to connect to sensors, service interfaces, and higher-level automation electronics. The 64 KB Flash and 8 KB SRAM support embedded control code and communication buffering without an external memory bus. Select the I/MM grade when industrial environmental qualification is required, and validate isolation, EMC, and fault-safe shutdown requirements at the system level.

💡

Energy-Efficient Appliance Drive

PIC24EP64MC202-E/MM can control compact appliance motors where efficiency, acoustic behavior, and component count drive the architecture. The motor-specific MCPWM and encoder interface support precise commutation and speed control, while the internal analog resources can reduce the number of external signal-conditioning components. Its 3.3 V operating range integrates naturally with a regulated low-voltage control section. In a fan, pump, or mixed motor appliance, validate standby behavior, brownout recovery, thermal performance, and the relationship between switching losses and controller quiescent demand before choosing heat-management provisions.

📱

Precision Analog Feedback Control

The PIC24EP64MC202-E/MM can implement compact analog-feedback loops because three internal op amps and four comparators provide dedicated analog resources alongside the 16-bit controller. These blocks can support current, temperature, or position feedback conditioning while the MCU executes supervisory and motor-control algorithms. The 60 MHz clock provides processing margin for filtering, compensation, diagnostics, and communications. Because integrated analog characteristics still depend on operating conditions, evaluate offset, noise, settling, input range, and output-drive requirements against the actual feedback network, and provide grounding and filtering that prevent motor-switching noise from corrupting the measured signal.

What are the key specifications of PIC24EP64MC202-E/MM that engineers should know?
The PIC24EP64MC202-E/MM is a 16-bit motor-control MCU with a 60 MHz maximum clock, 64 KB of Flash memory, 8 KB of SRAM, and a 3 V to 3.6 V operating supply. According to the Microchip product page and target-part listings, it includes MCPWM, QEI, three internal op amps, four comparators, PTG, and I2C, IrDA, LIN, SPI, UART, and USART interfaces in a 28-pin QFN-S package.
Where can I download the PIC24EP64MC202-E/MM datasheet PDF?
The official PIC24EP64MC202-E/MM technical information is available through the Microchip PIC24EP64MC202 product page linked on this page. The manufacturer product page provides the device documentation, package information, and related support resources. Use the pin-description table and electrical-characteristics section from that documentation when assigning PCB nets and calculating regulator headroom.
Where can I find the PIC24EP64MC202-E/MM pinout?
The authoritative pin assignment is the 28-pin pin-description table in the Microchip PIC24EP64MC202 documentation. The part uses a QFN-S package with a 6 mm × 6 mm body, and its exposed thermal pad must also be connected according to the manufacturer’s land-pattern guidance. Use the documentation rather than a generic QFN drawing because exposed-pad and programming functions must match the specific device.
What is the operating voltage of PIC24EP64MC202-E/MM?
The PIC24EP64MC202-E/MM operates from 3 V to 3.6 V according to the target-part specification. This range suits regulated 3.3 V embedded systems but does not permit direct connection to a higher-voltage motor bus. The motor power stage must therefore use separate high-voltage components and suitable isolation or level-shifting protection at the interface.
Is PIC24EP64MC202-E/MM suitable for brushless DC motor control?
Yes, the PIC24EP64MC202-E/MM is suitable for compact brushless DC motor-control designs because it combines a 60 MHz 16-bit processor, MCPWM, QEI, three op amps, and four comparators. According to the Microchip product page, the PIC24E motor-control family targets precise, energy-efficient motor systems. The selected switching devices, current-sense network, and protection circuitry still require application-specific design.
What can replace PIC24EP64MC202-E/MM?
PIC24EP64MC202-I/MM is the closest identified drop-in replacement because it retains the PIC24EP64MC202 device, 28-pin 6 mm × 6 mm QFN-S package, 64 KB Flash, and 8 KB SRAM while changing the temperature-grade suffix from E to I. The I/MM listing identifies 70 MIPS, whereas the E/MM listing identifies 60 MIPS, so firmware timing and qualification requirements should be reviewed before substitution.
Is PIC24EP64MC202-I/MM the same as PIC24EP64MC202-E/MM?
PIC24EP64MC202-I/MM is pin-compatible with PIC24EP64MC202-E/MM and retains 64 KB Flash, 8 KB SRAM, and the 28-pin QFN-S 6 mm × 6 mm package. The key difference is the grade suffix: the E/MM listing identifies 60 MIPS and a 60 MHz clock, while the I/MM listing identifies 70 MIPS. Confirm the required temperature grade and timing assumptions before interchange.
PIC24EP64MC202-E/MM vs PIC24EP64MC202-I/MM — which is better for industrial equipment?
PIC24EP64MC202-I/MM is generally the stronger candidate for industrial equipment when its I-grade temperature range satisfies the enclosure conditions. Both parts use the same 28-pin 6 mm × 6 mm QFN-S footprint and provide 64 KB Flash plus 8 KB SRAM. The listed performance identifiers differ, with 70 MIPS for I/MM and 60 MIPS for E/MM, so control-loop timing and qualification must also be checked.
When should I choose PIC24EP64MC202-E/MM over PIC24EP64MC202-I/MM?
Choose PIC24EP64MC202-E/MM when the E temperature grade is explicitly approved for the product’s ambient and enclosure conditions and the listed 60 MIPS performance is sufficient for the control loop. Choose the I/MM variant when its broader industrial temperature grade is required. Both retain the same package and memory configuration, so the decision should center on environmental qualification rather than footprint convenience.
Is PIC24EP64MC202-E/MM suitable for industrial automation applications?
The PIC24EP64MC202-E/MM can support industrial automation functions when its specified environmental range and local qualification requirements are met. Its 16-bit 60 MHz core, 64 KB Flash, 8 KB SRAM, MCPWM, encoder interface, internal analog blocks, and multiple serial interfaces are suitable for motor-driven axes and compact embedded controllers. Use the I/MM grade when its industrial temperature rating is the controlling requirement.
What is the best cross-brand equivalent for PIC24EP64MC202-E/MM?
No verified cross-brand drop-in equivalent is established for the PIC24EP64MC202-E/MM. A functional substitute would require a 28-pin QFN-S footprint, compatible motor-control PWM, encoder and analog resources, equivalent memory, and a validated firmware and peripheral migration path. Because these MCU peripherals are not automatically interchangeable, changing manufacturers generally requires board-level and firmware verification rather than a simple replacement.
Where can I buy PIC24EP64MC202-E/MM online?
Use the Request a Quote form on this page to request PIC24EP64MC202-E/MM availability, lot traceability, and commercial terms. The form allows the request to be directed for the exact 28-pin QFN-S orderable MPN. Confirm the manufacturer’s authorized status, package marking, date code, and delivery schedule when the quotation is returned.
What is the lead time for PIC24EP64MC202-E/MM?
Current lead time for PIC24EP64MC202-E/MM should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, package stock, lot traceability, and production scheduling. Include the required shipment date and annual usage in the request so the quotation can reflect the appropriate manufacturing and delivery plan.
Is PIC24EP64MC202-E/MM in stock?
Current stock for PIC24EP64MC202-E/MM should be requested through the Request a Quote form on this page. Because availability changes by package, quantity, lot, and region, the exact ordering code should be confirmed in the quotation response. Include the target quantity and required date when requesting stock and delivery information.
How do I design the power and layout for PIC24EP64MC202-E/MM?
Design the PIC24EP64MC202-E/MM around its 3 V to 3.6 V supply range and place local decoupling capacitors close to the appropriate supply pins. Keep the QFN exposed pad thermally coupled to a properly sized ground or thermal land pattern, route motor-switching nodes away from sensitive analog inputs, and follow the manufacturer’s package and pin layout guidance. Validate the final board for thermal performance, grounding, and signal integrity.

کے لیے انجینئرنگ ریفرنس ڈیٹا PIC24EP64MC202-E/MM — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose PIC24EP64MC202-E/MM for compact 3.3 V motor-control systems that need a 16-bit 60 MHz controller, 64 KB Flash, 8 KB SRAM, MCPWM, QEI, three op amps, and four comparators in a 28-pin 6 mm × 6 mm QFN-S footprint. Choose PIC24EP64MC202-I/MM when the same package and memory configuration are desired but the I-grade temperature requirement governs the design; review the difference between the listed 70 MIPS and 60 MIPS identifiers before changing timing assumptions. PIC24EP64MC202-E/SO provides the same family functionality in a 28-pin SOIC package and may simplify assembly, but it is not a drop-in replacement for the QFN-S PCB footprint. No cross-brand drop-in option is recommended without a full board, peripheral, firmware, and qualification review.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ PIC24EP64MC202-I/MM
Brand Microchip Technology Microchip Technology
Package 28-pin QFN-S, 6 mm × 6 mm 28-pin QFN-S, 6 mm × 6 mm
Architecture 16-bit 16-bit
Listed Performance 60 MIPS 70 MIPS
Maximum Clock Speed 60 MHz 60 MHz
Flash Program Memory 64 KB 64 KB
SRAM 8 KB 8 KB
Supply Voltage 3 V to 3.6 V 3 V to 3.6 V
Motor-Control Resources MCPWM and QEI MCPWM and QEI
Internal Analog Resources 3 op amps and 4 comparators 3 op amps and 4 comparators
Temperature Grade E grade I grade
Lifecycle Status Active Active

اہم امتیازی خصوصیات

  • Directly integrated motor-control and analog resources (بمقابلہPIC24EP64MC202-I/MM)
  • Compact 6 mm × 6 mm QFN-S footprint (بمقابلہPIC24EP64MC202-E/SO)
  • Dedicated 64 KB flash and 8 KB SRAM configuration (بمقابلہPIC24EP64MC202-I/MM)

ڈیزائن نوٹس

Use the manufacturer’s 28-pin QFN-S land pattern and exposed-pad recommendations without relocating the pad to accommodate a generic QFN footprint. Place input and output decoupling capacitors close to their associated supply pins, keep the exposed-pad connection unobstructed, and avoid routing motor-switching nets beneath the MCU. This arrangement reduces supply transients and prevents high-amplitude switching voltage from coupling into sensitive control or analog signals.

Design the controller supply for a regulated 3.3 V rail within the 3 V to 3.6 V operating range. Check the required MCPWM duty cycle, communication activity, analog-block usage, and ambient temperature when sizing regulator headroom. The motor power stage should use its own appropriately rated supply and protection, while the MCU rail receives local high-frequency bypassing to isolate digital switching activity.

Route the QEI inputs and analog feedback away from motor-switching nodes and provide filtering appropriate to the sensed bandwidth. The three internal op amps and four comparators simplify the feedback network, but their performance still depends on grounding, reference stability, and input levels. Check each analog signal against the applicable operating range and validate the assembled board with the motor stage energized to identify switching-noise coupling.

Do not treat PIC24EP64MC202-I/MM as an unrestricted substitute without reviewing its I-grade temperature requirements and the difference between the listed 70 MIPS and 60 MIPS identifiers. Also avoid assuming that the 28-pin SOIC variant is footprint-compatible with the E/MM QFN-S package. Programming, boot, and peripheral assignments should also be checked against the selected ordering code before a production substitution is released.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The device is listed with an active lifecycle status, but RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations are not stated in the cited product information.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-16 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

PIC24EP64MC202-E/MM datasheet PIC24EP64MC202-E/MM pinout PIC24EP64MC202-E/MM datasheet pdf PIC24EP64MC202-E/MM replacement PIC24EP64MC202-E/MM equivalent PIC24EP64MC202-E/MM price PIC24EP64MC202-E/MM stock Microchip PIC24EP64MC202-E/MM PIC24EP64MC202-E/MM QFN-S footprint PIC24EP64MC202-E/MM motor control PIC24EP64MC202-E/MM vs PIC24EP64MC202-I/MM PIC24EP64MC202 60MHz 64KB Flash

متعلقہ اجزاء اور اصطلاحات

Microchip Technology PIC24EP64MC202-E/MM PIC24EP64MC202-I/MM PIC24EP64MC202-E/SO PIC24EP64MC202 PIC24E 16-bit microcontroller motor-control MCU embedded microcontroller flash memory SRAM MCPWM QEI PTG operational amplifier comparator I2C SPI UART USART LIN IrDA QFN-S-28 surface-mount package 3.3 V control system
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں