Microchip Technology

PIC24FJ16MC102-I/SO - 16-Bit 16 MIPS Motor Control MCU | Microchip

Артикул: PIC24FJ16MC102-I/SO ✓ Активен
3 V to 3.6 V Vdss 28-pin SOIC Package 16 KB Flash Memory
MOQ: 1 |

PIC24FJ16MC102-I/SO Обзор

The Microchip Technology PIC24FJ16MC102-I/SO is a 16-bit motor-control microcontroller with 16 MIPS performance, 16 KB of Flash memory, 1 KB of SRAM, and a 28-pin SOIC package. It is designed for compact embedded systems requiring dedicated motor-control peripherals, low pin count, and flexible peripheral routing without relying on a larger external digital signal processor.

A motor-control microcontroller is a type of embedded microcontroller specialized for controlling motors, power stages, and position-feedback systems. In the product hierarchy, it combines a 16-bit MCU core, embedded control peripherals, communication interfaces, and analog functions on one integrated circuit. The PIC24FJ16MC102 belongs to Microchip's PIC24 family and adds CTMU, MCPWM, and Peripheral Pin Select capabilities to support economical motor-control systems.

Key features include a 16-bit architecture operating at 16 MIPS, 16 KB of program Flash, and 1 KB of RAM. Peripheral Pin Select allows supported digital functions to be assigned to an appropriate physical pin, simplifying board routing when motor-control signals, serial interfaces, and general-purpose I/O share a limited package. CTMU provides a dedicated capacitive-measurement resource, while the motor-control PWM peripherals support efficient generation of timing-critical control waveforms.

The device operates from 3 V to 3.6 V and includes I2C, IrDA, LIN, SPI, and UART connectivity according to its product documentation. Its 16-bit architecture and dedicated motor-control peripherals reduce the software and peripheral load associated with closed-loop motor systems. The 28-pin SOIC package also provides a mechanically accessible option for through-hole assembly rather than requiring a very small land grid array footprint.

Typical uses include low-cost BLDC and stepper-motor controllers, small industrial actuators, appliance drive systems, educational motor-control platforms, and compact embedded equipment with mixed analog and digital sensing. The MCPWM blocks are particularly useful for synchronized switching, while CTMU can support capacitive sensing for controls, position detection, or protective functions where the application requires it.

Designers should verify the exact peripheral-to-pin assignments for the selected 28-pin configuration in the Microchip pin-description table. Because the same physical pin can support multiple functions through Peripheral Pin Select, incorrect configuration can cause conflicts among PWM outputs, communications, and general-purpose I/O. Decoupling, programming access, clocking, and analog-ground layout should follow the guidance in the manufacturer data sheet.

This page combines the manufacturer's device information with practical application guidance, interface considerations, and verified same-package alternatives. It also highlights the differences between industrial-temperature and extended-temperature order codes so engineers can select a replacement without changing the PCB footprint.

Аналоги без доработки для PIC24FJ16MC102-I/SO — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с PIC24FJ16MC102-I/SO (тот же форм-фактор и посадочное место) — отличается по Package, Operating Voltage, Operating Temperature, ADC, Communication.

Microchip Technology
Package: 20-pin SOIC (7.50 mm body width)
Operating Temperature: -40 C to +85 C
Microchip Technology
Package: 20-pin SSOP (SS) 5.30 mm body
Operating Voltage: 3.0 V to 5.5 V
Operating Temperature: -40C to +85C (Industrial)
Microchip Technology
Package: 28-pin SSOP
Operating Voltage: 3.3 V
Microchip Technology
Package: 28-pin SOIC (0.295 inch / 7.50 mm body width)
Operating Voltage: 3.0 V to 3.6 V
Operating Temperature: -40 °C to +85 °C (Industrial, -I)
Microchip Technology
Package: 20-pin SOIC (SO), 7.50 mm body width
Operating Voltage: 3.0 V to 3.6 V
Operating Temperature: -40 C to +125 C (industrial, "-I" suffix)

PIC24FJ16MC102-E/SO

✅ Прямая замена
📦 28-pin SOIC
Same 28-pin SOIC footprint, 16 MIPS core, 16 KB Flash, and 1 KB RAM; temperature-grade suffix changes from I to E, with no published performance difference in the cited listing.

📋 Справочный аналог (нет в каталоге)

PIC24FJ16MC102-I/SO Максимальные параметры и электрические характеристики

Microcontroller Type 16-bit motor-control microcontroller
CPU Performance 16 MIPS
Program Memory 16 KB Flash
Program Memory Organization 5.5K x 24 words
Data Memory 1 KB RAM
Operating Voltage 3 V to 3.6 V
Корпус 28-pin SOIC
Тип монтажа Surface Mount
Motor-Control PWM MCPWM peripheral
Capacitive Touch CTMU peripheral
Peripheral Routing Peripheral Pin Select (PPS)
Serial Interfaces I2C, IrDA, LIN, SPI, UART
Статус RoHS Compliant

Руководство по цоколевке PIC24FJ16MC102-I/SO в корпусе 28-pin soic

Цоколевка для PIC24FJ16MC102-I/SO (корпус 28-pin soic). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса 28-pin soic для PIC24FJ16MC102-I/SO

Нет подробных данных о распиновке для PIC24FJ16MC102-I/SO.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

PIC24FJ16MC102-I/SO подходит для 6 применениеs: BLDC Motor Controllers, Stepper Motor Drives, Appliance Motor Control, Industrial Actuators, Motor-Control Education Platforms, Embedded Sensing and Control.

🏭

BLDC Motor Controllers

The PIC24FJ16MC102-I/SO fits compact brushless DC motor controllers because its 16-bit CPU executes at 16 MIPS while the dedicated MCPWM peripherals handle switching waveforms and timing-critical output functions. The 16 KB Flash and 1 KB RAM provide room for a motor-control state machine, communication handlers, and fault logic without requiring a separate DSP. Designers can use CTMU for capacitive sensing and Peripheral Pin Select to route supported signals around a constrained 28-pin SOIC layout. The principal design consideration is to configure every PWM and communication function before PCB routing so that multiplexed pins do not conflict.

⚡

Stepper Motor Drives

The PIC24FJ16MC102-I/SO is suitable for compact stepper-motor drives where predictable sequencing, limited board area, and multiple digital interfaces matter. The 16 MIPS 16-bit core can coordinate step-rate changes, position state, limit inputs, and host commands, while the MCPWM resources support the required timed outputs. Its 28-pin SOIC package remains accessible for conventional assembly, and PPS helps assign UART, SPI, or general-purpose I/O functions to usable pins. Firmware should include acceleration limits and loss-of-step recovery to protect the mechanism when commands arrive faster than the motor can follow.

🔧

Appliance Motor Control

Household and commercial appliances can use the PIC24FJ16MC102-I/SO to consolidate motor drive, user-interface sensing, and external communications in one 16-bit controller. Its CTMU peripheral supports capacitive touch or measurement functions, while the 3 V to 3.6 V operating range aligns with a 3.3 V appliance architecture. The MCU can manage a fan, pump, or damper motor and communicate with a main controller through I2C, SPI, UART, LIN, or IrDA. Because appliance motors are often noisy, keep switching stages and communication lines physically separated and verify grounding according to the manufacturer hardware guidance.

🏭

Industrial Actuators

The PIC24FJ16MC102-I/SO supports small industrial actuators that require deterministic PWM generation, local sensing, and network communication in a compact controller. Its 16 MIPS performance is appropriate for coordinating motor timing with status monitoring, while 16 KB Flash accommodates application firmware and 1 KB RAM supports short control loops. The I2C, SPI, UART, LIN, and IrDA options permit connection to sensors, operator interfaces, or service equipment. Designers should budget regulator headroom, isolate switching-node routing, and test startup and fault behavior across the full 3 V to 3.6 V supply range.

🧩

Motor-Control Education Platforms

The PIC24FJ16MC102-I/SO is well suited to educational motor-control platforms because it exposes a 16-bit architecture, MCPWM peripherals, CTMU, PPS, and multiple serial interfaces within a 28-pin SOIC package. The 16 MIPS processing rate allows students to observe control-loop timing and peripheral remapping without working with a large pin-count microcontroller. Microchip's related dsPICDEM MCHV and MCLV development-board documentation provides a reference for evaluating the device family. A laboratory implementation should begin with the manufacturer example configuration, then add feedback sensing and protection only after basic PWM operation is stable.

📱

Embedded Sensing and Control

The PIC24FJ16MC102-I/SO can serve as a compact mixed-sensing controller when a motor or actuator must operate alongside capacitive inputs, communications, and local logic. CTMU provides a dedicated capacitive-measurement resource, while the 16-bit CPU at 16 MIPS can combine measurements with control updates and serial protocols. Its 1 KB RAM is sufficient for short control buffers, although designers should evaluate data lifetime for larger acquisition workloads. PPS reduces routing constraints for supported peripherals, but every multiplexed assignment must be checked against the 28-pin device configuration before the board layout is released.

Сводка рекомендуемых товаров

PIC24FJ16MC102 Base device family for the motor-control design Используется в: BLDC Motor Controllers, Stepper Motor Drives, Appliance Motor Control, Industrial Actuators, Motor-Control Education Platforms, Embedded Sensing and Control DM330023 Microchip development board identified for motor-control evaluation Используется в: BLDC Motor Controllers, Industrial Actuators, Motor-Control Education Platforms PIC24FJ16MC101 Related PIC24FJ16MC family device Используется в: Stepper Motor Drives, Appliance Motor Control, Embedded Sensing and Control DM330021 dsPICDEM MCLV development board for motor-control evaluation Используется в: Motor-Control Education Platforms
What are the key specifications of PIC24FJ16MC102-I/SO that engineers should know?
The PIC24FJ16MC102-I/SO is a 16-bit motor-control MCU rated at 16 MIPS, with 16 KB of Flash memory and 1 KB of SRAM in a 28-pin SOIC package. According to the Microchip Technology PIC24FJ16MC101/102 and PIC24FJ32MC101/102/104 Data Sheet, the device operates from 3 V to 3.6 V and includes CTMU, MCPWM, and Peripheral Pin Select peripherals. Its interface set includes I2C, IrDA, LIN, SPI, and UART, making it suitable for compact motor-drive, appliance-control, and embedded automation designs.
What is the operating voltage of PIC24FJ16MC102-I/SO?
The PIC24FJ16MC102-I/SO operates from 3 V to 3.6 V according to its Microchip Technology product documentation. This supply range suits 3.3 V embedded systems, but the regulator and surrounding circuitry must remain within that limit. The 16-bit MCU combines 16 MIPS of processing performance with dedicated MCPWM and CTMU peripherals, allowing motor timing and control functions to remain predictable within a conventional 3.3 V design.
Where can I download the PIC24FJ16MC102-I/SO datasheet PDF?
The official PIC24FJ16MC102-I/SO data sheet can be downloaded from the Microchip Technology document link on this page. The document is titled “PIC24FJ16MC101/102 and PIC24FJ32MC101/102/104 Data Sheet” and covers the PIC24FJ16MC102 family alongside closely related devices. For complete programming and peripheral details, consult the current dsPIC33/PIC24 Family Reference Manual identified by the manufacturer.
Where can I find the PIC24FJ16MC102-I/SO pinout?
Use the pin-description table and package drawing in the Microchip Technology PIC24FJ16MC101/102 and PIC24FJ32MC101/102/104 Data Sheet to assign tracks to the 28-pin SOIC. Peripheral Pin Select can remap supported functions, but only after checking the device configuration and avoiding electrical conflicts. A standalone pin map is not reproduced on this page because its exact labels were not available for reliable transcription.
Is PIC24FJ16MC102-I/SO suitable for motor control applications?
Yes, the PIC24FJ16MC102-I/SO is specifically designed for compact motor-control systems. Its 16-bit core runs at 16 MIPS, while the MCPWM peripherals provide dedicated motor-control PWM resources and CTMU supports capacitive measurement. The device is well suited to BLDC, stepper, appliance-drive, and small actuator controllers where designers need more control capability than a basic general-purpose 8-bit MCU provides.
What is the difference between PIC24FJ16MC102-I/SO and PIC24FJ16MC102-E/SO?
PIC24FJ16MC102-I/SO and PIC24FJ16MC102-E/SO share the same 28-pin SOIC package, 16-bit architecture, 16 MIPS performance, 16 KB Flash, and 1 KB RAM. Their order-code temperature designations differ: the I/SO is the industrial-temperature selection and the E/SO is the extended-temperature selection. Both retain the MCPWM, CTMU, PPS, and communications features documented for the PIC24FJ16MC102 family.
When should I choose PIC24FJ16MC102-I/SO over PIC24FJ16MC102-E/SO?
Choose PIC24FJ16MC102-I/SO for industrial-temperature 3.3 V equipment where its specified temperature range satisfies the enclosure environment. Choose PIC24FJ16MC102-E/SO when the same MCU, memory configuration, motor-control peripherals, and 28-pin footprint are required across a wider operating-temperature range. The final choice should follow the temperature ratings in the manufacturer data sheet and the worst-case ambient conditions inside the finished product.
What is the best drop-in replacement for PIC24FJ16MC102-I/SO?
PIC24FJ16MC102-E/SO is the most direct verified drop-in replacement because it retains the same 28-pin SOIC footprint and the same 16-bit, 16 MIPS, 16 KB Flash, and 1 KB RAM configuration. Its extended-temperature order code is the principal difference. Confirm the required environmental range, programmed-device behavior, and availability through the Request a Quote form before using it as a production substitute.
Can PIC24FJ16MC102-E/SO replace PIC24FJ16MC102-I/SO without PCB changes?
Yes, PIC24FJ16MC102-E/SO uses the same 28-pin SOIC package and retains the principal device specifications of PIC24FJ16MC102-I/SO, including 16 MIPS performance, 16 KB Flash, and 1 KB RAM. It can therefore replace the target without changing the PCB land pattern. The temperature-grade designation differs, so verify that the E/SO variant covers the required environmental range and that all software-controlled peripherals remain compatible.
What can replace PIC24FJ16MC102-I/SO?
PIC24FJ16MC102-E/SO can serve as a same-footprint replacement when its extended-temperature rating is acceptable. Both parts are 28-pin SOIC devices with 16 MIPS performance, 16 KB Flash, and 1 KB RAM, so the PCB layout and core resource requirements remain aligned. For an exact replacement, also verify the I/O mapping, exposed peripheral functions, programming configuration, operating-temperature requirements, and the availability of the required package form.
Is PIC24FJ16MC102-I/SO the same as PIC24FJ16MC102-E/SO?
No, PIC24FJ16MC102-I/SO and PIC24FJ16MC102-E/SO are not identical orderable devices, although they share the same 28-pin SOIC footprint and core configuration. The primary distinction is the temperature grade encoded by the I versus E package suffix. Both provide 16 MIPS performance, 16 KB Flash, and 1 KB RAM, so electrical and software compatibility should be checked primarily against temperature requirements.
Where can I buy PIC24FJ16MC102-I/SO online?
Use the Request a Quote form on this page to request PIC24FJ16MC102-I/SO pricing, stock confirmation, and lead time from XAIPART. The form allows buyers to specify the required quantity and package form before submitting a request. Commercial terms and current component availability can change, so the quote form is the appropriate route for a current purchasing response.
What is the price of PIC24FJ16MC102-I/SO?
Request a current quotation for PIC24FJ16MC102-I/SO through the Request a Quote form on this page. The form accepts the required quantity and can be used to confirm unit pricing, stock, and delivery expectations. Pricing for catalog microcontrollers can vary with order quantity, procurement date, and component availability, so a direct quotation provides the most current purchasing information.
What is the lead time for PIC24FJ16MC102-I/SO?
Submit the required quantity and target schedule through the Request a Quote form on this page to obtain a current lead-time confirmation. Lead time depends on stock status, the exact package and temperature order code, and the requested delivery quantity. The form provides a direct purchasing channel for obtaining an accurate schedule rather than relying on a historical or generic availability estimate.
Is PIC24FJ16MC102-I/SO in stock?
Current stock for PIC24FJ16MC102-I/SO should be confirmed through the Request a Quote form on this page. Supply status can change rapidly for microcontroller order codes, and the quotation response can include the requested quantity, delivery schedule, and available package form. Use the form when an allocation decision requires current inventory rather than a general market indication.
How do I configure the MCPWM and PPS peripherals on PIC24FJ16MC102-I/SO?
Configure the MCPWM timing, output polarity, and dead-time requirements first, then use Peripheral Pin Select to assign the required functions to valid package pins. The Microchip Technology PIC24FJ16MC101/102 and PIC24FJ32MC101/102/104 Data Sheet provides the authoritative peripheral descriptions and pin-selection restrictions. Check the complete assignment table to prevent two selected functions from claiming the same output or input resource.

Справочные инженерные данные для PIC24FJ16MC102-I/SO — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose PIC24FJ16MC102-I/SO when an industrial-temperature, 3.3 V motor-control design needs a 16-bit CPU, 16 KB Flash, 1 KB RAM, MCPWM, CTMU, PPS, and multiple serial interfaces in a 28-pin SOIC package. PIC24FJ16MC102-E/SO is the practical same-footprint alternative when the extended-temperature order code better matches the product environment; verify its temperature limits and software behavior before substitution. Related PIC24FJ16MC family devices may share portions of the architecture, but they should not be selected solely from memory capacity because pin multiplexing, peripheral availability, and package assignments can differ. For new motor-control products, prioritize the MCPWM resources and PPS flexibility; for simple actuator controls with fewer communications requirements, confirm that the additional resources are genuinely needed before standardizing this part.

Сравнение с аналогами

Параметр Этот товар PIC24FJ16MC102-E/SO
Brand Microchip Technology Microchip Technology
Package 28-pin SOIC 28-pin SOIC - same footprint
Architecture 16-bit 16-bit
CPU Performance 16 MIPS 16 MIPS
Program Memory 16 KB Flash 16 KB Flash
Data Memory 1 KB RAM 1 KB RAM
Motor-Control PWM MCPWM peripheral MCPWM peripheral
Capacitive Touch CTMU peripheral CTMU peripheral
Peripheral Routing Peripheral Pin Select (PPS) Peripheral Pin Select (PPS)
Temperature-Grade Code I - industrial temperature E - extended temperature

Ключевые отличия

  • Matches the established industrial-temperature motor-control configuration (против PIC24FJ16MC102-E/SO)
  • Combines motor-control and capacitive-measurement resources (против PIC24FJ16MC102-E/SO)
  • Supports five named serial-interface families (против PIC24FJ16MC102-E/SO)

Заметки по проектированию

Resolve PPS assignments before fixing the PCB layout because the MCPWM, communication, and general-purpose functions can share package pins. Create a pin-allocation table that identifies the owner, alternate functions, and electrical direction of every connected signal. Place the MCU close to its decoupling capacitors and keep traces to power-stage switching nodes as short as possible. The manufacturer data-sheet pin-description table is the controlling reference for supported assignments.

Design the 3.3 V rail to remain between 3 V and 3.6 V under motor-startup and maximum-load conditions. A motor controller can draw repeated current transients from its supply, so the regulator and local decoupling network must not pull the MCU rail below its operating limit. Use the manufacturer recommended capacitor values and placement near the supply pins, and evaluate the power path with the highest switching activity rather than only the idle operating condition.

Separate the sensitive MCU and CTMU circuitry from motor-drive power paths, high-current return conductors, and switching-node copper. Route communication signals away from the motor stage and use a continuous ground reference under the MCU where the layout rules permit. CTMU measurements can be sensitive to capacitance and leakage, so keep sensor traces short and clean and validate the layout with the manufacturer's capacitive-measurement guidance.

Do not treat PIC24FJ16MC102-I/SO and PIC24FJ16MC102-E/SO as interchangeable without checking environmental requirements. Their footprint and primary electrical specifications align, but the I and E order codes denote different temperature grades. Confirm the exact suffix, operating-temperature range, pin configuration, and programmed peripheral behavior before production release. Also avoid selecting related family members solely by flash and RAM size because pin multiplexing and peripheral assignments can differ.

Информация о соответствии

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

RoHS compliance is identified for the exact PIC24FJ16MC102-I/SO order code. No additional REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were available.

Данные проверены: 2026-11-16 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

PIC24FJ16MC102-I/SO datasheet PIC24FJ16MC102-I/SO pinout PIC24FJ16MC102-I/SO specifications PIC24FJ16MC102-I/SO equivalent PIC24FJ16MC102-I/SO replacement PIC24FJ16MC102-I/SO cross reference PIC24FJ16MC102-I/SO application circuit PIC24FJ16MC102-I/SO footprint PIC24FJ16MC102-I/SO programming PIC24FJ16MC102-I/SO price PIC24FJ16MC102-I/SO stock PIC24FJ16MC102 vs PIC24FJ16MC102-E/SO

Связанные компоненты & термины

Microchip Technology PIC24FJ16MC102-I/SO PIC24FJ16MC102 PIC24FJ16MC102-E/SO PIC24FJ16MC101 PIC24FJ16MC family PIC24FJ16MC102-I/SO datasheet PDF PIC24FJ16MC102-I/SO pinout PIC24FJ16MC102-I/SO footprint PIC24FJ16MC102-I/SO application circuit PIC24FJ16MC102-I/SO programming PIC24FJ16MC102-I/SO equivalent PIC24FJ16MC102-I/SO replacement PIC24FJ16MC102-I/SO cross reference PIC24FJ16MC102-I/SO price PIC24FJ16MC102-I/SO stock PIC24FJ16MC102 vs PIC24FJ16MC102-E/SO Microchip Technology PIC24FJ16MC102 PIC24FJ16MC102-E/SO PIC24FJ16MC101 PIC24FJ16MC family PIC24FJ16MC102-I/SO datasheet PDF PIC24FJ16MC102-I/SO pinout PIC24FJ16MC102-I/SO footprint PIC24FJ16MC102-I/SO application circuit PIC24FJ16MC102-I/SO programming PIC24FJ16MC102-I/SO equivalent PIC24FJ16MC102-I/SO replacement PIC24FJ16MC102-I/SO cross reference PIC24FJ16MC102-I/SO price PIC24FJ16MC102-I/SO stock PIC24FJ16MC102 vs PIC24FJ16MC102-E/SO 16-bit microcontroller motor-control microcontroller embedded microcontroller PIC24 family dsPIC33/PIC24 Family Reference Manual MCPWM CTMU Peripheral Pin Select PPS 28-pin SOIC SOIC package family surface-mount package semiconductor 16 MIPS CPU 16 KB Flash memory 1 KB SRAM 3.3 V embedded control I2C IrDA LIN SPI UART BLDC motor control stepper motor control industrial actuator control appliance motor control capacitive sensing RoHS DM330021 DM330023
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ