PIC24FV08KM202-I/SP - 32MHz Low-Power MCU | Microchip
Артикул: PIC24FV08KM202-I/SP ✓ АктивенPIC24FV08KM202-I/SP Обзор
A PIC24-family microcontroller is a compact embedded-processing device combining a RISC-style CPU core, nonvolatile program memory, data RAM, digital I/O, timers, communications peripherals, and analog conversion functions. In the broader electronics hierarchy, it belongs to the microcontroller > embedded controller > semiconductor category. The PIC24F KM series is positioned for low-cost, low-power designs that need more precision and peripheral integration than an entry-level 8-bit controller.
Key features include 8 KB of Flash memory organized as 2.75K by 24 bits, 2 KB of SRAM, a maximum CPU frequency of 32 MHz, 23 I/O pins, and a 12-bit ADC. The integrated 8-bit DAC supports programmable analog output, while the integrated op amps reduce the need for external analog components. Operation across 1.8 V to 5.5 V permits use in low-voltage battery-powered equipment as well as conventional embedded systems.
The device combines a 16-bit PIC architecture with analog-rich peripherals in a 28-pin through-hole package. Its dedicated analog resources can simplify signal-conditioning, closed-loop control, and mixed-signal designs while conserving board area. The 23 available I/O pins provide flexibility for sensors, actuators, displays, communications links, and control inputs without requiring a larger package.
Typical uses include battery-powered sensor nodes, industrial monitoring equipment, compact motor-control systems, programmable analog interfaces, low-cost data loggers, and connected embedded products. Its low-power operating range is particularly useful in portable instruments where conserving energy during inactive periods is as important as processing performance during active measurement.
When designing around the PIC24FV08KM202-I/SP, budget Flash and RAM carefully because the 8 KB program memory is modest for protocol stacks or graphical interfaces. Confirm peripheral assignments and analog multiplexing against the manufacturer pin-description table before allocating pins. The through-hole SPDIP package also requires adequate spacing and mechanical clearance between adjacent components during PCB assembly.
This page combines the device's core specifications with engineering-focused application guidance, package considerations, and verified same-family drop-in comparisons. These details help designers distinguish functional alternatives from options that can truly replace the original part without changing the PCB footprint.
Аналоги без доработки для PIC24FV08KM202-I/SP — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC24FV08KM202-I/SP (тот же форм-фактор и посадочное место) — отличается по Package, ADC, Mounting Type, ADC Resolution, Comparators.
PIC24FV08KM202-E/SP
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC24FV08KM102-E/SP
✅ Прямая заменаУточнить цену
Открыть даташит →PIC24FV16KM202-I/SP
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →PIC24FV32KM202-I/SP
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
PIC24FV16KM204-I/SP
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
PIC24FV08KM202-I/SP Максимальные параметры и электрические характеристики
| Microcontroller Type | 16-bit PIC XLP low-power microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Program Memory | 8 KB Flash (2.75K x 24 bits) |
| Data Memory | 2 KB RAM |
| Number of I/O Pins | 23 |
| ADC Resolution | 12 bits |
| DAC Resolution | 8 bits |
| Operating Voltage Range | 1.8 V to 5.5 V |
| Корпус | 28-pin SPDIP |
| Тип монтажа | Through-hole |
| Configurable Logic Cell | Yes |
| Capture/Compare/PWM Modules | Yes |
Руководство по цоколевке PIC24FV08KM202-I/SP в корпусе 28-pin spdip
Цоколевка для PIC24FV08KM202-I/SP (корпус 28-pin spdip). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для PIC24FV08KM202-I/SP.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
PIC24FV08KM202-I/SP подходит для 6 применениеs: Battery-Powered Sensor Node, Industrial Process Monitor, Compact Motor Controller, Programmable Analog Interface, Portable Data Logger, Embedded User Interface Controller.
Battery-Powered Sensor Node
The PIC24FV08KM202-I/SP fits compact sensor nodes because its 1.8 V to 5.5 V operating range supports low-energy supply designs, while the 12-bit ADC provides useful measurement resolution. The MCU can periodically wake, acquire sensor data, perform local processing, and return to sleep to reduce average consumption. Its 2 KB RAM and 8 KB Flash are suitable for modest acquisition loops and lightweight communication routines. The 28-pin SPDIP package also simplifies prototype assembly and through-hole inspection in industrial monitoring prototypes.
Рекомендуется
Industrial Process Monitor
For industrial process monitoring, the PIC24FV08KM202-I/SP combines a 12-bit ADC, 23 I/O pins, timers, and configurable logic cells in one controller. It can acquire several analog channels, apply filtering, operate threshold logic, and drive local relays or indicators without a separate programmable logic device. The 32 MHz CPU supports responsive control loops, and the 1.8 V to 5.5 V supply range accommodates multiple industrial interface levels when properly scaled. Galvanic isolation and surge protection must be implemented outside the MCU.
Рекомендуется
Compact Motor Controller
The PIC24FV08KM202-I/SP is suitable for compact closed-loop motor controllers because its 32 MHz processing capability supports timing and control tasks while the integrated 12-bit ADC can monitor current or position signals. Capture, compare, and PWM resources help generate deterministic control outputs, while the 8-bit DAC provides a basic analog reference or command signal. The 23 I/O pins leave room for sensors, gate-drive signaling, and status indicators. Power-stage protection remains a separate board-level requirement.
Рекомендуется
Programmable Analog Interface
The integrated op amps and 8-bit DAC make the PIC24FV08KM202-I/SP useful for programmable analog interfaces that need both sensing and output generation. A designer can condition a low-level sensor signal, compare it against a software-defined threshold, and update an analog output while retaining digital control in the same package. This integration can reduce component count and board area. The 1.8 V minimum supply is useful for low-energy systems, although op-amp output swing, bandwidth, and stability must be checked against the operating point.
Рекомендуется
Portable Data Logger
A portable data logger can use the PIC24FV08KM202-I/SP to sample sensors with its 12-bit ADC and store compact event or measurement records in its 2 KB RAM before periodic transfer. The 8 KB Flash limits local firmware complexity, so the application should avoid large protocol stacks and buffer only essential information. Low-voltage operation supports compact battery-powered formats, while the through-hole package simplifies rugged prototype construction. External nonvolatile storage may be required when continuous logging exceeds the MCU's internal memory.
Рекомендуется
Embedded User Interface Controller
The PIC24FV08KM202-I/SP can manage a simple embedded user interface composed of switches, indicators, and a small display while also performing the product's primary measurement function. Its 23 I/O pins provide enough connections for buttons, status LEDs, and display commands, and the 32 MHz CPU supports responsive menu and debounce handling. The 8 KB Flash and 2 KB RAM suit concise interfaces rather than graphical applications. A serial display or segmented display architecture is generally more appropriate than a graphics-heavy controller.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC24FV08KM202-I/SP — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC24FV08KM202-E/SP | PIC24FV08KM102-E/SP | PIC24FV16KM202-I/SP | PIC24FV32KM202-I/SP | PIC24FV16KM204-I/SP |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-pin SPDIP | 28-pin SPDIP | 28-pin SPDIP | 28-pin SPDIP | 28-pin SPDIP | 28-pin SPDIP |
| CPU Architecture | 16-bit PIC | 16-bit PIC | 16-bit PIC | 16-bit PIC | 16-bit PIC | 16-bit PIC |
| Program Flash | 8 KB | 8 KB | 8 KB | 16 KB | 32 KB | 16 KB |
| ADC Resolution | 12 bits | 12 bits | 12 bits | 12 bits | 12 bits | 12 bits |
| Operating Voltage Range | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V |
Ключевые отличия
- Matches the industrial-grade 8 KB and 2 KB KM202 memory configuration (против PIC24FV08KM202-E/SP)
- Provides a practical memory-capacity upgrade without changing the KM202 family (против PIC24FV16KM202-I/SP)
- Combines a 12-bit ADC, 8-bit DAC, and op amps in a 28-pin through-hole device (против PIC24FV08KM102-E/SP)
- Balances 32 MHz processing with a compact 8 KB program footprint (против PIC24FV32KM202-I/SP)
Заметки по проектированию
Keep all MCU, ADC, DAC, and op-amp supply pins connected to the appropriate supply rails, and place the manufacturer-recommended bypass capacitors directly beside the package pins. Because the device supports operation from 1.8 V to 5.5 V, validate every peripheral's minimum voltage before sharing a rail. Analog signal paths should use quiet ground routing and separate noisy switching-current returns where the board layout permits.
The 28-pin SPDIP footprint requires adequate pin spacing for through-hole insertion and soldering. Preserve the manufacturer's pin numbering orientation when assigning power, programming, reset, and I/O functions. Check the pin-description table for analog multiplexing before assigning pins, because moving a signal to a different I/O can change its ADC channel, comparator input, or peripheral function.
Do not assume that a related PIC24FV part is interchangeable solely because it uses a 28-pin SPDIP package. The 8 KB Flash and 2 KB RAM of the target constrain bootloader, library, and application sizing, while other family members may change peripheral assignments or memory organization. Review the device configuration table, linker map, and application code before releasing a substitution for production.
Place the MCU close to the analog inputs it monitors and route sensitive signals away from switching nodes, high-current returns, and digital clock outputs. Use a continuous ground reference beneath the analog section and pair analog inputs with suitable guarding or filtering where needed. The integrated ADC and op amps reduce external components, but PCB parasitics still affect measurement accuracy and should be included in front-end design calculations.
Budget the controller's program memory carefully before adding middleware. The 8 KB Flash figure includes the space required by the application, configuration data, startup code, interrupt routines, and runtime libraries. If a communication stack or bootloader does not fit, select a higher-memory same-family device early in the design rather than attempting a late firmware rewrite with uncertain timing and memory effects.
Информация о соответствии
Compliance declarations for the exact PIC24FV08KM202-I/SP ordering code were not identified. Confirm RoHS, REACH, lead-free, halogen-free, and automotive qualification status with Microchip before production release.