Microchip Technology

PIC24FV08KM202-I/SP - 32MHz Low-Power MCU | Microchip

MPN: PIC24FV08KM202-I/SP ✓ Active
1.8 V to 5.5 V Vdss 28-pin SPDIP Package 32 MHz Speed 8 KB Flash (2.75K x 24 bits) Memory
MOQ: 1 |

PIC24FV08KM202-I/SP Overview

Microchip Technology PIC24FV08KM202-I/SP is a 16-bit PIC XLP low-power microcontroller operating up to 32 MHz, with 8 KB program Flash, 2 KB RAM, and integrated analog resources in a 28-pin SPDIP package. It supports operation from 1.8 V to 5.5 V and combines a 12-bit ADC, an 8-bit DAC, and operational amplifiers for compact embedded-control designs.

A PIC24-family microcontroller is a compact embedded-processing device combining a RISC-style CPU core, nonvolatile program memory, data RAM, digital I/O, timers, communications peripherals, and analog conversion functions. In the broader electronics hierarchy, it belongs to the microcontroller > embedded controller > semiconductor category. The PIC24F KM series is positioned for low-cost, low-power designs that need more precision and peripheral integration than an entry-level 8-bit controller.

Key features include 8 KB of Flash memory organized as 2.75K by 24 bits, 2 KB of SRAM, a maximum CPU frequency of 32 MHz, 23 I/O pins, and a 12-bit ADC. The integrated 8-bit DAC supports programmable analog output, while the integrated op amps reduce the need for external analog components. Operation across 1.8 V to 5.5 V permits use in low-voltage battery-powered equipment as well as conventional embedded systems.

The device combines a 16-bit PIC architecture with analog-rich peripherals in a 28-pin through-hole package. Its dedicated analog resources can simplify signal-conditioning, closed-loop control, and mixed-signal designs while conserving board area. The 23 available I/O pins provide flexibility for sensors, actuators, displays, communications links, and control inputs without requiring a larger package.

Typical uses include battery-powered sensor nodes, industrial monitoring equipment, compact motor-control systems, programmable analog interfaces, low-cost data loggers, and connected embedded products. Its low-power operating range is particularly useful in portable instruments where conserving energy during inactive periods is as important as processing performance during active measurement.

When designing around the PIC24FV08KM202-I/SP, budget Flash and RAM carefully because the 8 KB program memory is modest for protocol stacks or graphical interfaces. Confirm peripheral assignments and analog multiplexing against the manufacturer pin-description table before allocating pins. The through-hole SPDIP package also requires adequate spacing and mechanical clearance between adjacent components during PCB assembly.

This page combines the device's core specifications with engineering-focused application guidance, package considerations, and verified same-family drop-in comparisons. These details help designers distinguish functional alternatives from options that can truly replace the original part without changing the PCB footprint.

Drop-in alternatives for PIC24FV08KM202-I/SP — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with PIC24FV08KM202-I/SP (same form factor and footprint) — differing in Package, ADC, Mounting Type, ADC Resolution, Comparators.

Microchip Technology
Package: 28-pin SPDIP (Skinny Plastic DIP, 0.300" / 7.62 mm row spacing)
ADC: 12-bit
Comparators: Yes
Microchip Technology
Package: 28-SOIC (SO, 7.50 mm width)
ADC: 12-bit, 500 ksps
Mounting Type: Surface Mount
Microchip Technology
Package: 28-QFN (6x6 mm) with exposed pad
ADC: 12-bit, multi-channel (per datasheet)
Mounting Type: Surface Mount
Microchip Technology
ADC Resolution: 12-bit

PIC24FV08KM202-E/SP

✅ Drop-In
📦 28-pin SPDIP
Same 8 KB Flash and 2 KB RAM configuration, but the E/SP temperature grade differs from the I/SP industrial grade.

📋 Reference alternative (not in catalog)

PIC24FV08KM102-E/SP

✅ Drop-In
Microchip Technology
📦 28-pin SPDIP
PIC® XLP™ 24F · 16-bit PIC24 modified Harvard · 32 MHz (16 MIPS) · 8 KB (2.75K x 24) · 1 KB · 512 B · 2.0 V to 5.5 V · 28-pin SPDIP (Skinny Plastic DIP, 0.300" / 7.62 mm row spacing)

Contact for price

View Datasheet →

PIC24FV16KM202-I/SP

✅ Drop-In ⚠️ Specs Unverified
Microchip Technology
📦 28-pin SPDIP
16-bit RISC microcontroller · 32 MHz · 16 MIPS at 3.3 V · Flash · 16 KB (5.5K x 24 words) · 2 KB · 512 bytes · 12-bit

Contact for price

View Datasheet →

PIC24FV32KM202-I/SP

✅ Drop-In ⚠️ Specs Unverified
📦 28-pin SPDIP
Provides 32 KB Flash, 300% more program memory than the 8 KB target, while retaining the KM202 family and SPDIP package.

📋 Reference alternative (not in catalog)

PIC24FV16KM204-I/SP

✅ Drop-In ⚠️ Specs Unverified
📦 28-pin SPDIP
Offers 16 KB Flash, 100% more program memory, with a related KM204 peripheral configuration that requires pin-level verification.

📋 Reference alternative (not in catalog)

PIC24FV08KM202-I/SP Maximum Ratings & Electrical Characteristics

Microcontroller Type 16-bit PIC XLP low-power microcontroller
Maximum CPU Frequency 32 MHz
Program Memory 8 KB Flash (2.75K x 24 bits)
Data Memory 2 KB RAM
Number of I/O Pins 23
ADC Resolution 12 bits
DAC Resolution 8 bits
Operating Voltage Range 1.8 V to 5.5 V
Package 28-pin SPDIP
Mounting Type Through-hole
Configurable Logic Cell Yes
Capture/Compare/PWM Modules Yes

PIC24FV08KM202-I/SP 28-pin spdip Pin Configuration Guide

Pin configuration for PIC24FV08KM202-I/SP (28-pin spdip package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

28-pin spdip package pinout diagram for PIC24FV08KM202-I/SP

No detailed pinout data available for PIC24FV08KM202-I/SP.

Refer to the datasheet for full pin configuration.

Typical Applications

PIC24FV08KM202-I/SP is suitable for 6 applications: Battery-Powered Sensor Node, Industrial Process Monitor, Compact Motor Controller, Programmable Analog Interface, Portable Data Logger, Embedded User Interface Controller.

🧩

Battery-Powered Sensor Node

The PIC24FV08KM202-I/SP fits compact sensor nodes because its 1.8 V to 5.5 V operating range supports low-energy supply designs, while the 12-bit ADC provides useful measurement resolution. The MCU can periodically wake, acquire sensor data, perform local processing, and return to sleep to reduce average consumption. Its 2 KB RAM and 8 KB Flash are suitable for modest acquisition loops and lightweight communication routines. The 28-pin SPDIP package also simplifies prototype assembly and through-hole inspection in industrial monitoring prototypes.

🏭

Industrial Process Monitor

For industrial process monitoring, the PIC24FV08KM202-I/SP combines a 12-bit ADC, 23 I/O pins, timers, and configurable logic cells in one controller. It can acquire several analog channels, apply filtering, operate threshold logic, and drive local relays or indicators without a separate programmable logic device. The 32 MHz CPU supports responsive control loops, and the 1.8 V to 5.5 V supply range accommodates multiple industrial interface levels when properly scaled. Galvanic isolation and surge protection must be implemented outside the MCU.

🔧

Compact Motor Controller

The PIC24FV08KM202-I/SP is suitable for compact closed-loop motor controllers because its 32 MHz processing capability supports timing and control tasks while the integrated 12-bit ADC can monitor current or position signals. Capture, compare, and PWM resources help generate deterministic control outputs, while the 8-bit DAC provides a basic analog reference or command signal. The 23 I/O pins leave room for sensors, gate-drive signaling, and status indicators. Power-stage protection remains a separate board-level requirement.

📡

Programmable Analog Interface

The integrated op amps and 8-bit DAC make the PIC24FV08KM202-I/SP useful for programmable analog interfaces that need both sensing and output generation. A designer can condition a low-level sensor signal, compare it against a software-defined threshold, and update an analog output while retaining digital control in the same package. This integration can reduce component count and board area. The 1.8 V minimum supply is useful for low-energy systems, although op-amp output swing, bandwidth, and stability must be checked against the operating point.

📱

Portable Data Logger

A portable data logger can use the PIC24FV08KM202-I/SP to sample sensors with its 12-bit ADC and store compact event or measurement records in its 2 KB RAM before periodic transfer. The 8 KB Flash limits local firmware complexity, so the application should avoid large protocol stacks and buffer only essential information. Low-voltage operation supports compact battery-powered formats, while the through-hole package simplifies rugged prototype construction. External nonvolatile storage may be required when continuous logging exceeds the MCU's internal memory.

📺

Embedded User Interface Controller

The PIC24FV08KM202-I/SP can manage a simple embedded user interface composed of switches, indicators, and a small display while also performing the product's primary measurement function. Its 23 I/O pins provide enough connections for buttons, status LEDs, and display commands, and the 32 MHz CPU supports responsive menu and debounce handling. The 8 KB Flash and 2 KB RAM suit concise interfaces rather than graphical applications. A serial display or segmented display architecture is generally more appropriate than a graphics-heavy controller.

Recommended Products Summary

PIC24FV08KM202-I/SP Microchip Technology Used in: Battery-Powered Sensor Node, Industrial Process Monitor, Compact Motor Controller, Programmable Analog Interface, Portable Data Logger, Embedded User Interface Controller PIC24F08KM202 Related PIC24F KM family controller Used in: Battery-Powered Sensor Node, Industrial Process Monitor, Compact Motor Controller, Programmable Analog Interface, Portable Data Logger, Embedded User Interface Controller
What is the operating voltage of PIC24FV08KM202-I/SP?
The PIC24FV08KM202-I/SP operates from 1.8 V to 5.5 V. According to the Microchip product page, this range supports low-voltage embedded systems while retaining compatibility with common 3.3 V and 5 V supply environments. Designers should verify that every external peripheral and pull-up network remains within its own voltage limits, especially when the MCU runs below 3.3 V.
What are the key specifications of PIC24FV08KM202-I/SP that engineers should know?
The PIC24FV08KM202-I/SP is a 16-bit PIC XLP microcontroller with a 32 MHz maximum CPU frequency, 8 KB Flash, 2 KB RAM, 23 I/O pins, a 12-bit ADC, and an 8-bit DAC. The Microchip product page also identifies integrated op amps and configurable logic cells. It is packaged in a 28-pin SPDIP and supports a 1.8 V to 5.5 V operating range.
Where can I download the PIC24FV08KM202-I/SP datasheet PDF?
The official Microchip product page is the preferred starting point for the PIC24FV08KM202-I/SP datasheet and supporting documentation. Open the PIC24F08KM202 family page, select the PIC24FV08KM202-I/SP ordering code, and use the datasheet or documentation links associated with that exact device. The manufacturer page remains the authoritative source for pin descriptions, electrical limits, and package drawings.
Where can I find the PIC24FV08KM202-I/SP pinout?
The PIC24FV08KM202-I/SP pinout is documented in the manufacturer pin-description table for the 28-pin SPDIP package. Use that table to assign I/O, power, ground, programming, reset, and analog functions before routing the PCB. The manufacturer page identifies the 28-pin package and 23 I/O pins, while the datasheet provides the authoritative numbering and multiplexing details.
What can replace the PIC24FV08KM202-I/SP?
A true replacement must retain the 28-pin SPDIP footprint and pin compatibility. Same-family options include PIC24FV08KM202-E/SP, PIC24FV08KM102-E/SP, PIC24FV16KM202-I/SP, PIC24FV32KM202-I/SP, and PIC24FV16KM204-I/SP, subject to firmware, memory, temperature-grade, and peripheral requirements. No cross-brand drop-in alternative was confirmed for this 28-pin device.
What is the best drop-in replacement for PIC24FV08KM202-I/SP?
The closest like-for-like drop-in is the PIC24FV08KM202-E/SP because it retains the same family and 28-pin SPDIP arrangement while changing the temperature grade. Higher-memory PIC24FV family alternatives may also fit electrically, but they can change flash capacity, RAM, peripheral availability, or firmware requirements. Confirm the complete pin-description table and memory map before approving a substitution.
Is PIC24FV08KM202-I/SP suitable for battery-powered sensor applications?
Yes, the PIC24FV08KM202-I/SP is suitable for battery-powered sensor applications because it is a PIC XLP low-power MCU with a 1.8 V to 5.5 V operating range. Its 12-bit ADC supports direct analog measurement, and the integrated DAC and op amps can reduce external circuitry. Actual battery life depends on the selected sleep mode, sensor duty cycle, and firmware-driven peripheral shutdown sequence.
What is the difference between PIC24FV08KM202-I/SP and PIC24FV08KM202-E/SP?
The primary difference is the device temperature grade: the I/SP suffix denotes the industrial-grade option, while E/SP denotes the extended-temperature option. Both belong to the PIC24FV08KM202 family, use the 28-pin SPDIP package, and target 8 KB Flash and 2 KB RAM configurations. Confirm the exact temperature limits and qualification requirements in the manufacturer ordering information before substitution.
PIC24FV08KM202-I/SP vs PIC24FV08KM102-E/SP — which is better?
Choose PIC24FV08KM202-I/SP when the design requires the larger 2 KB RAM allocation and industrial temperature grade. The PIC24FV08KM102-E/SP belongs to the related KM102 family and is listed as a cross-reference candidate, but its memory and peripheral configuration may differ. Review the device selection tables and linker memory map before treating it as a direct replacement.
When should I choose PIC24FV08KM202-I/SP over PIC24FV16KM202-I/SP?
Choose PIC24FV08KM202-I/SP when 8 KB Flash and 2 KB RAM are sufficient and a smaller program footprint simplifies qualification. Choose PIC24FV16KM202-I/SP when the application needs more program memory while retaining the same family and package approach. Firmware size, bootloader requirements, and development-tool support should determine which option creates the lower engineering risk.
Can PIC24FV16KM202-I/SP replace PIC24FV08KM202-I/SP?
The PIC24FV16KM202-I/SP can be considered for PCB reuse because it is a higher-memory member of the same PIC24FV KM202 family in a 28-pin SPDIP package. It provides 16 KB Flash rather than the original part's 8 KB, increasing program memory by 100%. Check the exact pin table, RAM capacity, peripheral configuration, and firmware memory map before marking it as a drop-in replacement.
How much Flash and RAM does PIC24FV08KM202-I/SP have?
The PIC24FV08KM202-I/SP provides 8 KB of Flash program memory organized as 2.75K by 24 bits and 2 KB of RAM. According to the Microchip product page and distributor technical listing, these resources suit compact embedded-control firmware with integrated analog functions. Developers should reserve space for configuration words, boot code, library routines, and application data.
Where can I buy PIC24FV08KM202-I/SP and what is its lead time?
Use the Request a Quote form on this page to request current availability, lead time, minimum order quantity, and packaging details for PIC24FV08KM202-I/SP. Quote-based procurement confirms the exact ordering code, including the industrial temperature grade and 28-pin SPDIP package. The manufacturer identifies the PIC24F08KM202 family, but current channel inventory should be checked through the request process.
What is the price of PIC24FV08KM202-I/SP?
Current commercial terms for PIC24FV08KM202-I/SP should be requested through the Request a Quote form on this page. The form allows the exact MPN, quantity, and shipment destination to be matched to current channel inventory. Pricing is not included here because it can vary with order quantity, package quantity, delivery location, and market conditions.
Is PIC24FV08KM202-I/SP in stock?
Current inventory for PIC24FV08KM202-I/SP should be confirmed by submitting the Request a Quote form on this page. Include the required quantity and a complete delivery address so the procurement team can identify the appropriate tube quantity and available supply. Because inventory changes by region and order size, a general stock statement would not be reliable.

Engineering reference data for PIC24FV08KM202-I/SP — comparison, design guidance, and compliance information.

Selection Guide

Choose PIC24FV08KM202-I/SP when an industrial-grade, low-power design needs a 16-bit controller, 32 MHz processing, 8 KB Flash, 2 KB RAM, and integrated analog functions in a 28-pin SPDIP package. Select PIC24FV08KM202-E/SP for the closest functional configuration when the E temperature grade is acceptable. Consider PIC24FV16KM202-I/SP when firmware needs additional program memory but the KM202 peripheral architecture remains preferred, and PIC24FV32KM202-I/SP when the extra 24 KB of Flash materially simplifies the application. PIC24FV16KM204-I/SP offers expanded resources but requires closer pin-level and peripheral review. For all candidates, verify the device configuration, memory map, pin multiplexing, temperature range, programming configuration, and qualification requirements before approving a drop-in replacement.

Comparison with Alternatives

Parameter This Product PIC24FV08KM202-E/SP PIC24FV08KM102-E/SP PIC24FV16KM202-I/SP PIC24FV32KM202-I/SP PIC24FV16KM204-I/SP
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 28-pin SPDIP 28-pin SPDIP 28-pin SPDIP 28-pin SPDIP 28-pin SPDIP 28-pin SPDIP
CPU Architecture 16-bit PIC 16-bit PIC 16-bit PIC 16-bit PIC 16-bit PIC 16-bit PIC
Program Flash 8 KB 8 KB 8 KB 16 KB 32 KB 16 KB
ADC Resolution 12 bits 12 bits 12 bits 12 bits 12 bits 12 bits
Operating Voltage Range 1.8 V to 5.5 V 1.8 V to 5.5 V 1.8 V to 5.5 V 1.8 V to 5.5 V 1.8 V to 5.5 V 1.8 V to 5.5 V

Key Differentiators

  • Matches the industrial-grade 8 KB and 2 KB KM202 memory configuration (vs PIC24FV08KM202-E/SP)
  • Provides a practical memory-capacity upgrade without changing the KM202 family (vs PIC24FV16KM202-I/SP)
  • Combines a 12-bit ADC, 8-bit DAC, and op amps in a 28-pin through-hole device (vs PIC24FV08KM102-E/SP)
  • Balances 32 MHz processing with a compact 8 KB program footprint (vs PIC24FV32KM202-I/SP)

Design Notes

Keep all MCU, ADC, DAC, and op-amp supply pins connected to the appropriate supply rails, and place the manufacturer-recommended bypass capacitors directly beside the package pins. Because the device supports operation from 1.8 V to 5.5 V, validate every peripheral's minimum voltage before sharing a rail. Analog signal paths should use quiet ground routing and separate noisy switching-current returns where the board layout permits.

The 28-pin SPDIP footprint requires adequate pin spacing for through-hole insertion and soldering. Preserve the manufacturer's pin numbering orientation when assigning power, programming, reset, and I/O functions. Check the pin-description table for analog multiplexing before assigning pins, because moving a signal to a different I/O can change its ADC channel, comparator input, or peripheral function.

Do not assume that a related PIC24FV part is interchangeable solely because it uses a 28-pin SPDIP package. The 8 KB Flash and 2 KB RAM of the target constrain bootloader, library, and application sizing, while other family members may change peripheral assignments or memory organization. Review the device configuration table, linker map, and application code before releasing a substitution for production.

Place the MCU close to the analog inputs it monitors and route sensitive signals away from switching nodes, high-current returns, and digital clock outputs. Use a continuous ground reference beneath the analog section and pair analog inputs with suitable guarding or filtering where needed. The integrated ADC and op amps reduce external components, but PCB parasitics still affect measurement accuracy and should be included in front-end design calculations.

Budget the controller's program memory carefully before adding middleware. The 8 KB Flash figure includes the space required by the application, configuration data, startup code, interrupt routines, and runtime libraries. If a communication stack or bootloader does not fit, select a higher-memory same-family device early in the design rather than attempting a late firmware rewrite with uncertain timing and memory effects.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

Compliance declarations for the exact PIC24FV08KM202-I/SP ordering code were not identified. Confirm RoHS, REACH, lead-free, halogen-free, and automotive qualification status with Microchip before production release.

Data verified on: 2026-11-16 — data verified and curated by XAIPART's component engineering team

Related Searches

PIC24FV08KM202-I/SP datasheet PIC24FV08KM202-I/SP pinout PIC24FV08KM202-I/SP specifications PIC24FV08KM202-I/SP price PIC24FV08KM202-I/SP replacement PIC24FV08KM202-I/SP equivalent PIC24FV08KM202-I/SP 28 pin PIC24FV08KM202-I/SP application circuit PIC24FV08KM202 vs PIC24FV16KM202 Microchip PIC24FV08KM202-I/SP PIC24FV08KM202-I/SP 32MHz 8KB PIC24FV08KM202-I/SP stock

Related Components & Terms

Microchip Technology PIC24FV08KM202-I/SP PIC24FV08KM202-E/SP PIC24FV08KM102-E/SP PIC24FV16KM202-I/SP PIC24FV32KM202-I/SP PIC24FV16KM204-I/SP PIC24F08KM202 PIC XLP PIC24F 16-bit microcontroller embedded controller semiconductor 12-bit ADC 8-bit DAC operational amplifier configurable logic cell Capture/Compare/PWM 28-pin SPDIP through-hole package 1.8 V to 5.5 V operation 8 KB Flash 2 KB RAM 32 MHz
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details