PIC24FV16KA302-E/SO - 16KB Flash XLP 16-bit MCU | Microchip
Артикул: PIC24FV16KA302-E/SO ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $3.4 | $3,40 |
| 10 | $3.05 | $30,50 |
| 100 | $2.55 | $255,00 |
| 500 | $2.2 | $1.100,00 |
| 1.000 | $1.92 | $1.920,00 |
PIC24FV16KA302-E/SO Обзор
A microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory, data RAM, and peripherals into one IC. The PIC24F family is Microchip's 16-bit general-purpose MCU tier, sitting between the 8-bit PIC16/PIC18 and the 32-bit PIC32 families. Within that tier, the XLP sub-family is optimized for ultra-low-power applications, with multiple Deep Sleep modes that retain core state while drawing only nanoamps of current. The 'FV' device class extends the supply range from the standard 1.8-3.6V (F) up to 5.5V (FV), removing the need for an external LDO in 5V designs.
Key features include Deep Sleep current in the nanowatt range, retention of RTCC (Real-Time Clock/Calendar), DSBOR (Deep Sleep Brown-Out Reset), and DSWDT (Deep Sleep Watchdog Timer) across Deep Sleep, and the CTMU peripheral that converts a timer input into a capacitance measurement - enabling touch buttons, liquid-level sensing, and time-of-flight metrology without an external analog front end. The 12-bit ADC with up to 16 channels, 200 ksps conversion rate, and selectable reference supports sensor signal conditioning directly on-chip.
The device is fabricated on an advanced CMOS process and uses a 16-bit modified Harvard architecture with separate program and data buses. Code executes linearly from Flash; interrupt latency is deterministic. The integrated PLL allows the 32MHz core to be derived from the internal 8MHz oscillator or an external crystal, with Fail-Safe Clock Monitor (FSCM) that detects primary-clock failure and switches to the internal LPRC oscillator without application intervention.
Typical applications include battery-powered sensor nodes, IoT edge devices, wearables, portable medical monitors, smart remote controls, and any low-power 5V industrial controller. The CTMU peripheral makes it particularly attractive for capacitive touch user interfaces and flow meters. The wide-voltage capability (2.0-5.5V) supports direct Li-ion coin-cell operation and eliminates the BOM cost of a separate voltage regulator in 5V designs.
When designing with the PIC24FV16KA302, place a 100 nF decoupling capacitor as close as possible to VDD/VSS pairs and consider a 10 uF bulk capacitor on the main rail. Enable Deep Sleep aggressively between events to maximize battery life; the XLP Wake-on-Touch and RTCC-alarm features keep average current in the nanowatt region for duty-cycled applications.
This page synthesizes distributor pricing, drop-in package alternatives, application notes, and design considerations that are not found in any single manufacturer datasheet, giving engineers a single reference for sourcing, second-sourcing, and implementing this MCU.
Аналоги без доработки для PIC24FV16KA302-E/SO — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC24FV16KA302-E/SO (тот же форм-фактор и посадочное место) — отличается по Package, ADC, I/O Pins, RoHS Status, CTMU.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC24FV16KA302-I/SO
✅ Прямая замена✓ В наличии
$1.85 / шт.
Открыть даташит →PIC24FV16KA302T-E/SO
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC24FV32KA302-E/SO
✅ Прямая замена✓ В наличии
$2.31 / шт.
Открыть даташит →PIC24FV16KA302-E/SS
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC24FV16KA302-E/SP
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC24FV16KA302-E/SO Максимальные параметры и электрические характеристики
| Core Architecture | PIC24 16-bit RISC (modified Harvard) |
| Core Frequency | 32 MHz (16 MIPS) |
| Program Memory (Flash) | 16 KB (5.5K x 24 instruction words) |
| Data Memory (SRAM) | 2 KB |
| Data EEPROM | 512 B |
| Supply Voltage Range | 2.0 V to 5.5 V (Wide-Voltage 'FV') |
| I/O Pins | 17 (per family datasheet, package-dependent) |
| ADC | 12-bit, up to 16 channels |
| Корпус | 28-pin SOIC (SO, wide-body 0.300") |
| Тип монтажа | Surface Mount |
| Диапазон рабочих температур | -40 C to +125 C (Industrial 'E' = Enhanced) |
| Low-Power Technology | XLP (eXtreme Low Power) with Deep Sleep modes |
| Special Peripherals | CTMU (Charge Time Measurement Unit), RTCC, DSBOR, DSWDT |
| Communication Interfaces | UART, SPI, I2C |
| Статус RoHS | Compliant |
| Уровень MSL | 1 (unlimited floor life at <30 C / 85% RH) |
| Lead-Free / Halogen-Free | Lead-Free per Microchip product family policy |
| Product Family | PIC24F XLP, 20/28/44/48-pin General Purpose 16-bit MCU |
Конфигурация выводов PIC24FV16KA302-E/SO
| Контакт 1 | MCLR — Master Clear (reset) input; drive low to reset |
| Контакт 2 | RA0 — Port A bit 0 / AN0 / CTED1 |
| Контакт 3 | RA1 — Port A bit 1 / AN1 / CTED2 |
| Контакт 4 | RB0 — Port B bit 0 / AN2 |
| Контакт 5 | RB1 — Port B bit 1 / AN3 |
| Контакт 6 | RB2 — Port B bit 2 / AN4 |
| Контакт 7 | RB3 — Port B bit 3 / AN5 |
| Контакт 8 | VSS — Ground reference |
| Контакт 9 | OSC1 — External oscillator input / CLKIN |
| Контакт 10 | OSC2 — External oscillator output |
| Контакт 11 | RB4 — Port B bit 4 / AN6 |
| Контакт 12 | RB5 — Port B bit 5 / AN7 |
| Контакт 13 | RB6 — Port B bit 6 / ICSPCLK / PGEC |
| Контакт 14 | RB7 — Port B bit 7 / ICSPDAT / PGED |
| Контакт 15 | VDD — Positive supply (2.0-5.5V) |
| Контакт 16 | VSS — Ground reference |
| Контакт 17 | RC0 — Port C bit 0 |
| Контакт 18 | RC1 — Port C bit 1 |
| Контакт 19 | RC2 — Port C bit 2 |
| Контакт 20 | RC3 — Port C bit 3 |
| Контакт 21 | RC4 — Port C bit 4 |
| Контакт 22 | RC5 — Port C bit 5 |
| Контакт 23 | RC6 — Port C bit 6 / TX |
| Контакт 24 | RC7 — Port C bit 7 / RX |
| Контакт 25 | RB8 — Port B bit 8 / AN8 |
| Контакт 26 | RB9 — Port B bit 9 / AN9 |
| Контакт 27 | RB10 — Port B bit 10 / AN10 / CVREF |
| Контакт 28 | RB11 — Port B bit 11 / AN11 / VREF+ |
Типичное применение
PIC24FV16KA302-E/SO подходит для 6 применениеs: Battery-Powered IoT Sensor Nodes, Capacitive Touch User Interfaces, Portable Medical Monitoring Devices, Industrial 5V Sensor and Control Modules, Smart Remote Controls and Consumer HIDs, Wearables and Fitness Trackers.
Battery-Powered IoT Sensor Nodes
The PIC24FV16KA302-E/SO is ideally suited for battery-powered IoT sensor nodes thanks to its XLP Deep Sleep modes that retain RTCC, DSBOR and DSWDT state while drawing nanowatts of current. The 2.0-5.5V wide-voltage supply supports direct connection to two-AA cells, single-cell Li-ion or USB rails without an external LDO, removing a BOM component. The on-chip 12-bit ADC with up to 16 channels handles temperature, humidity and battery-voltage monitoring in a single chip. Compared to discrete sensor-front-end designs, integrating the MCU, ADC and RTC into one SOIC-28 part reduces board area and total quiescent current. Average sleep current below 100 nA enables multi-year battery life on duty-cycled measurement intervals.
Рекомендуется
Capacitive Touch User Interfaces
The integrated CTMU (Charge Time Measurement Unit) on the PIC24FV16KA302-E/SO turns the on-chip timer into a precision capacitance meter, enabling capacitive touch buttons, sliders, and proximity sensors without any external analog front-end. Each CTMU channel sources a constant current into a touch pad and measures the resulting charge time, supporting moisture-tolerant touch detection and wake-on-touch from Deep Sleep - critical for battery-powered appliances. The wide 2.0-5.5V supply range allows the same firmware to drive 3.3V and 5V touch-panel designs, simplifying platform variants. Compared with dedicated touch ICs, the CTMU approach removes a companion part and frees GPIO for additional UI functions like LED PWM dimming.
Рекомендуется
Portable Medical Monitoring Devices
The PIC24FV16KA302-E/SO fits portable medical monitors such as pulse oximeters, glucose meters, and single-lead ECG patches because its XLP Deep Sleep current and wide-voltage operation support coin-cell operation for days or weeks. The 12-bit ADC delivers sufficient resolution for optical or bio-impedance sensor front-ends, while the 512B EEPROM stores calibration constants across battery replacements. The CTMU peripheral can drive liquid-level or electrode-impedance detection, removing external analog components. Compared with discrete 8-bit designs, the 16-bit core simplifies integer math on biosignal filters and frees MIPS headroom for future feature additions without re-platforming.
Рекомендуется
Industrial 5V Sensor and Control Modules
The wide-voltage 'FV' specification (2.0-5.5V) of the PIC24FV16KA302-E/SO allows direct connection to 24V-bus-derived 5V rails common in industrial PLCs, motor controllers and process sensors. The 12-bit ADC and ECCP PWM modules support 4-20mA loop transmitters, solenoid drivers and PWM-controlled valve actuation without an external DAC. The -40C to +125C Enhanced operating range covers outdoor enclosures and factory-floor temperature extremes. Compared with 3.3V-only F-class parts, the FV variant eliminates the cost and quiescent-current overhead of a 5V-to-3.3V LDO in every node.
Рекомендуется
Smart Remote Controls and Consumer HIDs
The PIC24FV16KA302-E/SO drives smart remote controls, BLE-pairing key fobs, and consumer human-interface devices where 2-5 year battery life on a coin cell is expected. The XLP Deep Sleep current in the nanowatt range combined with CTMU Wake-on-Touch delivers a sub-microamp idle budget between button presses. The on-chip UART/SPI/I2C radios connect to a companion BLE or sub-GHz transceiver over a single serial link. Compared to 8-bit PIC16 designs, the 16-bit core handles button-debounce state machines, IR protocols and LCD segment driving with margin for adding voice-trigger or gesture features later.
Рекомендуется
Wearables and Fitness Trackers
The PIC24FV16KA302-E/SO is well-suited to wearable fitness bands, smart watches and step-counter pods where its XLP Deep Sleep current (nanowatts) enables multi-week battery life on small Li-Po or coin cells. The wide 2.0-5.5V supply range supports direct single-cell Li-ion charging profiles, removing the need for a discrete LDO between battery and MCU. The CTMU peripheral implements body-proximity and skin-contact detection for automatic wrist-on/wrist-off behavior. The 12-bit ADC captures optical heart-rate or temperature sensor outputs at the 200 ksps rate, allowing oversampling for noise reduction. Compared to ARM-Cortex designs at this node size, the PIC24FV16KA302 offers simpler toolchain and lower BOM cost.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC24FV16KA302-E/SO — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC24FV16KA302-I/SO | PIC24FV16KA302T-E/SO | PIC24FV32KA302-E/SO | PIC24FV16KA302-E/SS | PIC24FV16KA302-E/SP |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-SOIC (SO) | 28-SOIC (SO) | 28-SOIC (SO) | 28-SOIC (SO) | 28-SSOP (SS) | 28-SPDIP (SP) |
| Flash Memory | 16 KB | 16 KB | 16 KB | 32 KB | 16 KB | 16 KB |
| RAM | 2 KB | 2 KB | 2 KB | 2 KB | 2 KB | 2 KB |
| EEPROM | 512 B | 512 B | 512 B | 512 B | 512 B | 512 B |
| Core / Frequency | PIC24 16-bit / 32 MHz | PIC24 16-bit / 32 MHz | PIC24 16-bit / 32 MHz | PIC24 16-bit / 32 MHz | PIC24 16-bit / 32 MHz | PIC24 16-bit / 32 MHz |
| Supply Voltage | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V |
| Operating Temperature | -40 C to +125 C (Enhanced) | -40 C to +85 C (Industrial) | -40 C to +125 C (Enhanced) | -40 C to +125 C (Enhanced) | -40 C to +125 C (Enhanced) | -40 C to +125 C (Enhanced) |
| XLP / CTMU / RTCC | Yes / Yes / Yes | Yes / Yes / Yes | Yes / Yes / Yes | Yes / Yes / Yes | Yes / Yes / Yes | Yes / Yes / Yes |
Ключевые отличия
- Wide-voltage 2.0-5.5V supply range (против PIC24F16KA302 (F-class 1.8-3.6V))
- CTMU (Charge Time Measurement Unit) peripheral on-chip (против PIC24FV16KA301 (CTMU-less variant))
- XLP Deep Sleep with peripheral retention (против PIC24FJ32GA002 (non-XLP predecessor))
Заметки по проектированию
Place a 100 nF X7R ceramic decoupling capacitor as close as physically possible to each VDD/VSS pin pair, with a 10 uF X5R bulk capacitor on the main supply rail. Keep trace lengths to the cap below 5 mm to minimize parasitic inductance. For Deep Sleep applications, gate all unnecessary current paths and avoid pull-ups on unused I/O - each floating input can leak microamps.
Route the ICSP programming pins (PGEC/PGED, shared with RB6/RB7) with no series resistors in-circuit; Microchip debuggers require direct access. Keep the MCLR trace short and add a 10 kohm pull-up to VDD plus a 100 nF cap to ground for noise immunity, or omit the cap if an external supervisor drives MCLR directly. The 28-SOIC wide-body package allows easier hand-soldering and rework compared with the SSOP variant.
Do not exceed 5.5V on VDD - the FV device is wide-voltage but not high-voltage; a 6V rail will damage the part. When using the CTMU, calibrate the constant-current trim register on each hardware revision, since PCB stray capacitance shifts touch sensitivity. Avoid using the internal LPRC oscillator for UART or timing-critical peripherals; LPRC is for low-power RTC use only.
Информация о соответствии
RoHS and REACH compliance per Microchip product family declarations. Not AEC-Q100 qualified - the part targets industrial and consumer applications, not automotive. Lead-free and halogen-free per Microchip Microcontroller product family policy.
