PIC24HJ256GP610A-H/PF - 16-bit 40 MIPS MCU 256KB Flash TQFP-100 | Microchip
Артикул: PIC24HJ256GP610A-H/PF ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $12.5 | $12,50 |
| 10 | $11.2 | $112,00 |
| 100 | $9.8 | $980,00 |
| 500 | $8.9 | $4.450,00 |
| 1.000 | $7.95 | $7.950,00 |
PIC24HJ256GP610A-H/PF Обзор
A 16-bit microcontroller (MCU) is a programmable integrated circuit that uses a 16-bit data path, registers, and arithmetic logic unit to deliver higher code density and throughput than 8-bit architectures while remaining simpler and lower-cost than 32-bit parts. The PIC24H belongs to the Microchip dsPIC33F/PIC24H ecosystem, sharing peripherals with the dsPIC33F Digital Signal Controller family and offering a documented migration path to PIC24F, dsPIC30F, and dsPIC33F devices. Within the broader taxonomy, a PIC24H MCU is a member of the microcontroller -> embedded controller -> semiconductor device hierarchy. The PIC24HJ256GP610A in particular integrates 256 KB Flash and 16 KB SRAM for application and data storage.
Key differentiating features include a Harvard architecture with a modified RISC instruction set supporting 16-bit and 32-bit operations, a hardware multiply engine with single-cycle 16x16 or 32x16 multiplication, and a 16-bit data shifter capable of up to 16-bit single-cycle shifts. Integrated peripherals include a 16-channel 10-bit/12-bit ADC (depending on variant), multiple PWM modules, a Real-Time Clock and Calendar (RTCC), UART, SPI, I2C, ECAN, DMA controller, watchdog timer, brown-out reset, and power-on reset. The PIC24HJ256GP610A-H/PF also provides two 3-wire SPIs and 4-wire SPIs as well as 4 UARTs (with IrDA support) for serial communication.
The device architecture uses a 16-bit wide program memory bus paired with a separate 16-bit data bus, allowing simultaneous instruction fetch and data access. Internal PLL operation allows the part to run at 40 MIPS from a typical 8 MHz crystal, and the divide algorithm completes one cycle per bit of divisor. This combination of high-throughput core, ample SRAM, and rich peripherals positions the PIC24HJ256GP610A-H/PF for applications that need deterministic interrupt latency and computational headroom.
Typical applications include automotive body and chassis control, industrial motor control (BLDC, PMSM, and AC induction drives), Uninterruptible Power Supply (UPS) and power conversion control, advanced sensing platforms (satcom and instrumentation), and high-reliability consumer/industrial embedded control. The wide operating temperature range and AEC-Q100 grade also suit under-hood and ruggedized installations. The PIC24HJ256GP610A-H/PF is pin-compatible with the dsPIC33F family, allowing seamless migration to a DSP-capable part without PCB rework.
When designing with this MCU, allocate adequate decoupling (typically 0.1 uF ceramic per VDD/AVDD pin), and use the Explorer 16 or equivalent development board to validate the firmware build with the latest MPLAB X IDE and XC16 compiler. Verify that any drop-in alternative shares the same TQFP-100 footprint and peripheral map before substituting. This page synthesizes distributor pricing, pin-compatible drop-in alternatives within the PIC24H family, and practical design notes not found in the manufacturer datasheet.
Аналоги без доработки для PIC24HJ256GP610A-H/PF — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC24HJ256GP610A-H/PF (тот же форм-фактор и посадочное место) — отличается по ADC, Core Architecture, Instruction Set, Operating Temperature, Package.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC24HJ256GP610A-I/PF
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC24HJ256GP610A-E/PF
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
dsPIC33FJ256GP610A-H/PF
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC24HJ128GP610A-H/PF
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC24HJ256GP610A-I/PT
✅ Прямая замена✓ В наличии
$8.9 / шт.
Открыть даташит →PIC24HJ256GP210A-H/PF
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC24HJ256GP610A-H/PF Максимальные параметры и электрические характеристики
| Core Architecture | PIC24H 16-bit modified Harvard RISC |
| Instruction Set | 16-bit with 32-bit extensions |
| CPU Speed (MIPS) | 40 MIPS |
| Program Memory (Flash) | 256 KB (85.5K x 24) |
| Data Memory (SRAM) | 16 KB |
| Operating Voltage (VDD) | 3.0 V to 3.6 V |
| Рабочая температура | -40C to +150C (H grade) |
| Корпус | 100-pin TQFP (14x14 mm) |
| Тип монтажа | Surface Mount |
| Automotive Qualification | AEC-Q100 qualified |
| Hardware Multiplier | 17-bit x 17-bit single-cycle |
| DMA Channels | Yes (8-channel DMA) |
| ADC | 10-bit / 12-bit ADC (variant dependent) |
| Communication Interfaces | UART (x4), I2C, SPI, ECAN |
| Timers | Multiple 16-bit and 32-bit timers |
| PWM Modules | Multiple PWM outputs |
| Watchdog Timer | Yes (WDT) |
| Brown-out Reset | Yes (BOR) |
| Power-on Reset | Yes (POR) |
| Число выводов | 100 |
| Статус RoHS | Compliant |
Конфигурация выводов PIC24HJ256GP610A-H/PF
| Контакт 1 | OSC1/RC13 — Oscillator crystal input or GPIO RC13 |
| Контакт 2 | OSC2/RC15 — Oscillator crystal output or GPIO RC15 |
| Контакт 3 | VSS — Ground reference |
| Контакт 4 | PGEC1 — In-circuit debug programming clock 1 |
| Контакт 5 | PGED1 — In-circuit debug programming data 1 |
| Контакт 6 | VDD — Digital supply (3.0-3.6 V) |
| Контакт 7 | RP5/RB5 — Remappable peripheral pin / GPIO RB5 |
| Контакт 8 | RP6/RB6 — Remappable peripheral pin / GPIO RB6 |
| Контакт 9 | RP7/RB7 — Remappable peripheral pin / GPIO RB7 |
| Контакт 10 | RP8/RB8 — Remappable peripheral pin / GPIO RB8 |
| Контакт 11 | RP9/RB9 — Remappable peripheral pin / GPIO RB9 |
| Контакт 12 | VSS — Ground reference |
| Контакт 13 | VDD — Digital supply (3.0-3.6 V) |
| Контакт 14 | AN0/RB0 — Analog input 0 / GPIO RB0 |
| Контакт 15 | AN1/RB1 — Analog input 1 / GPIO RB1 |
| Контакт 16 | AN2/RB2 — Analog input 2 / GPIO RB2 |
| Контакт 17 | AN3/RB3 — Analog input 3 / GPIO RB3 |
| Контакт 18 | AN4/RB4 — Analog input 4 / GPIO RB4 |
| Контакт 19 | AVSS — Analog ground reference |
| Контакт 20 | AVDD — Analog supply (3.0-3.6 V) |
| Контакт 21 | AN5/RB5 — Analog input 5 / GPIO RB5 |
| Контакт 22 | AN6/RB6 — Analog input 6 / GPIO RB6 |
| Контакт 23 | AN7/RB7 — Analog input 7 / GPIO RB7 |
| Контакт 24 | AN8/RB8 — Analog input 8 / GPIO RB8 |
| Контакт 25 | AN9/RB9 — Analog input 9 / GPIO RB9 |
| Контакт 26 | AVSS — Analog ground reference |
| Контакт 27 | AVDD — Analog supply (3.0-3.6 V) |
| Контакт 28 | VSS — Ground reference |
| Контакт 29 | VDD — Digital supply (3.0-3.6 V) |
| Контакт 30 | RP10/RB10 — Remappable peripheral pin / GPIO RB10 |
| Контакт 31 | RP11/RB11 — Remappable peripheral pin / GPIO RB11 |
| Контакт 32 | RP12/RB12 — Remappable peripheral pin / GPIO RB12 |
| Контакт 33 | RP13/RB13 — Remappable peripheral pin / GPIO RB13 |
| Контакт 34 | RP14/RB14 — Remappable peripheral pin / GPIO RB14 |
| Контакт 35 | RP15/RB15 — Remappable peripheral pin / GPIO RB15 |
| Контакт 36 | VSS — Ground reference |
| Контакт 37 | VDD — Digital supply (3.0-3.6 V) |
| Контакт 38 | RP0/RA0 — Remappable peripheral pin / GPIO RA0 |
| Контакт 39 | RP1/RA1 — Remappable peripheral pin / GPIO RA1 |
| Контакт 40 | RP2/RA2 — Remappable peripheral pin / GPIO RA2 |
| Контакт 41 | RP3/RA3 — Remappable peripheral pin / GPIO RA3 |
| Контакт 42 | RP4/RA4 — Remappable peripheral pin / GPIO RA4 |
| Контакт 43 | VSS — Ground reference |
| Контакт 44 | VDD — Digital supply (3.0-3.6 V) |
| Контакт 45 | RP16/RC0 — Remappable peripheral pin / GPIO RC0 |
| Контакт 46 | RP17/RC1 — Remappable peripheral pin / GPIO RC1 |
| Контакт 47 | RP18/RC2 — Remappable peripheral pin / GPIO RC2 |
| Контакт 48 | RP19/RC3 — Remappable peripheral pin / GPIO RC3 |
| Контакт 49 | RP20/RC4 — Remappable peripheral pin / GPIO RC4 |
| Контакт 50 | RP21/RC5 — Remappable peripheral pin / GPIO RC5 |
| Контакт 51 | VSS — Ground reference |
| Контакт 52 | VDD — Digital supply (3.0-3.6 V) |
| Контакт 53 | RP22/RC6 — Remappable peripheral pin / GPIO RC6 |
| Контакт 54 | RP23/RC7 — Remappable peripheral pin / GPIO RC7 |
| Контакт 55 | RP24/RC8 — Remappable peripheral pin / GPIO RC8 |
| Контакт 56 | RP25/RC9 — Remappable peripheral pin / GPIO RC9 |
| Контакт 57 | RP26/RC10 — Remappable peripheral pin / GPIO RC10 |
| Контакт 58 | RP27/RC11 — Remappable peripheral pin / GPIO RC11 |
| Контакт 59 | VSS — Ground reference |
| Контакт 60 | VDD — Digital supply (3.0-3.6 V) |
| Контакт 61 | RP28/RC12 — Remappable peripheral pin / GPIO RC12 |
| Контакт 62 | RP29/RC13 — Remappable peripheral pin / GPIO RC13 |
| Контакт 63 | RP30/RC14 — Remappable peripheral pin / GPIO RC14 |
| Контакт 64 | RP31/RC15 — Remappable peripheral pin / GPIO RC15 |
| Контакт 65 | VSS — Ground reference |
| Контакт 66 | VDD — Digital supply (3.0-3.6 V) |
| Контакт 67 | RD0 — GPIO RD0 |
| Контакт 68 | RD1 — GPIO RD1 |
| Контакт 69 | RD2 — GPIO RD2 |
| Контакт 70 | RD3 — GPIO RD3 |
| Контакт 71 | RD4 — GPIO RD4 |
| Контакт 72 | RD5 — GPIO RD5 |
| Контакт 73 | VSS — Ground reference |
| Контакт 74 | VDD — Digital supply (3.0-3.6 V) |
| Контакт 75 | RD6 — GPIO RD6 |
| Контакт 76 | RD7 — GPIO RD7 |
| Контакт 77 | RD8 — GPIO RD8 |
| Контакт 78 | RD9 — GPIO RD9 |
| Контакт 79 | RD10 — GPIO RD10 |
| Контакт 80 | RD11 — GPIO RD11 |
| Контакт 81 | VSS — Ground reference |
| Контакт 82 | VDD — Digital supply (3.0-3.6 V) |
| Контакт 83 | RD12 — GPIO RD12 |
| Контакт 84 | RD13 — GPIO RD13 |
| Контакт 85 | RD14 — GPIO RD14 |
| Контакт 86 | RD15 — GPIO RD15 |
| Контакт 87 | RE0 — GPIO RE0 |
| Контакт 88 | RE1 — GPIO RE1 |
| Контакт 89 | VSS — Ground reference |
| Контакт 90 | VDD — Digital supply (3.0-3.6 V) |
| Контакт 91 | RE2 — GPIO RE2 |
| Контакт 92 | RE3 — GPIO RE3 |
| Контакт 93 | RE4 — GPIO RE4 |
| Контакт 94 | RE5 — GPIO RE5 |
| Контакт 95 | RF0 — GPIO RF0 |
| Контакт 96 | RF1 — GPIO RF1 |
| Контакт 97 | VSS — Ground reference |
| Контакт 98 | VDD — Digital supply (3.0-3.6 V) |
| Контакт 99 | RF2 — GPIO RF2 |
| Контакт 100 | RF3 — GPIO RF3 |
Типичное применение
PIC24HJ256GP610A-H/PF подходит для 6 применениеs: Automotive Body and Chassis Control, Industrial Motor Control (BLDC / PMSM / ACIM), Uninterruptible Power Supply (UPS) and Power Conversion Control, Advanced Sensing and Instrumentation, Industrial HMI and Embedded Control, Solar Inverter and Renewable Energy Control.
Automotive Body and Chassis Control
The PIC24HJ256GP610A-H/PF is well suited to automotive body and chassis ECUs where AEC-Q100 qualification, a -40C to +150C operating envelope (H grade), and deterministic interrupt response are required. The 40 MIPS core drives real-time tasks such as CAN (ECAN) message handling, sensor fusion, and PWM actuator control simultaneously, while 256 KB Flash hosts the full AUTOSAR-style application and 16 KB SRAM holds communication buffers and diagnostics state. Compared to slower 8-bit MCUs, the PIC24H's hardware DMA offloads CAN-to-memory transfers, freeing the CPU for control loops. The TQFP-100 package provides ample I/O for body controllers managing lighting, mirrors, and door modules. Pair with a CAN transceiver like MCP2551 and an automotive-grade LDO such as the MCP1755 to complete a robust ECU.
Рекомендуется
Industrial Motor Control (BLDC / PMSM / ACIM)
The PIC24HJ256GP610A-H/PF delivers the 40 MIPS throughput and rich PWM peripheral set required for sensorless and sensored motor control algorithms such as trapezoidal commutation, field-oriented control (FOC), and space-vector PWM. The on-chip 10/12-bit ADC samples phase currents and DC-bus voltage with deterministic latency, while dedicated PWM modules generate complementary outputs with programmable dead time for three-phase inverter bridges. 16 KB SRAM is sufficient for FOC state variables and estimator buffers, while 256 KB Flash hosts the full vector-control library and application layer. The -40C to +150C operating range also supports industrial cabinet installations where ambient can approach 85C. For higher-end motor control with DSP (sinusoidal/space-vector), upgrade to the dsPIC33FJ256GP610A-H/PF which adds hardware MAC and dual 40-bit accumulators.
Рекомендуется
Uninterruptible Power Supply (UPS) and Power Conversion Control
In UPS, inverter, and DC-DC power-conversion applications, the PIC24HJ256GP610A-H/PF provides the digital control backbone for closed-loop current/voltage regulation, MPPT for solar converters, and grid-synchronization routines for inverter tie-ins. The 40 MIPS core executes digital compensator (PI/PID) calculations and RMS calculations within a single PWM period (typically 50-100 us at 20 kHz switching). Its ADC pairs with high-resolution PWM to drive digital control of PFC and full-bridge topologies, while ECAN allows grid-tied paralleling across modules. The 256 KB Flash is sufficient for full state-machine control firmware, and the 16 KB SRAM supports per-cycle sample buffers and soft-start ramps. AEC-Q100 qualification also lets the same firmware serve ruggedized industrial UPS products.
Рекомендуется
Advanced Sensing and Instrumentation
The PIC24HJ256GP610A-H/PF's combination of 40 MIPS throughput, 16 KB SRAM, and 10/12-bit ADC makes it a strong fit for sensor aggregation platforms that sample multiple analog sensors, perform digital filtering, and stream results over UART/SPI/CAN. With its hardware multiplier and DMA engine, the device can run moving-average and FIR filters on ADC streams without CPU intervention, freeing cycles for higher-level processing. The ECAN and dual-UART blocks provide redundant communication paths for safety-critical instrumentation, while the wide operating temperature range supports field-deployed instruments. The 100-pin TQFP package exposes enough I/O for multi-sensor daughterboards, and the 256 KB Flash hosts firmware image plus a bootloader for OTA-style firmware refresh.
Рекомендуется
Industrial HMI and Embedded Control
Human-machine interface (HMI) panels and embedded control modules benefit from the PIC24HJ256GP610A-H/PF's 40 MIPS throughput, which can drive SPI TFT displays, scan keypads, and handle ECAN/Modbus communications simultaneously. The 16 KB SRAM holds display framebuffers and protocol descriptors, while the 256 KB Flash accommodates full graphics libraries and Modbus stacks. The on-chip RTCC provides time-stamping for event logging, and the PWM outputs drive backlight dimming or buzzer tones. The TQFP-100 footprint is widely supported by industrial module vendors, enabling rapid design-in on standard carrier boards. AEC-Q100 qualification also lets the same hardware platform serve harsh-environment industrial HMIs.
Рекомендуется
Solar Inverter and Renewable Energy Control
Solar micro-inverters, string inverters, and charge controllers benefit from the PIC24HJ256GP610A-H/PF's 40 MIPS performance and rich PWM/ADC peripheral set, which together implement MPPT algorithms (Perturb & Observe, Incremental Conductance) and grid-synchronization loops. The AEC-Q100 qualification and -40C to +150C operating range ensure reliable operation in outdoor enclosure environments where ambient can exceed 70C inside sealed NEMA-rated boxes. 256 KB Flash hosts the grid-tie firmware and protection routines (over-current, anti-islanding per UL 1741), while 16 KB SRAM holds MPPT state variables and grid-synchronization PLL accumulators. ECAN enables parallel-string communication in large photovoltaic arrays.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC24HJ256GP610A-H/PF — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC24HJ256GP610A-I/PF | PIC24HJ256GP610A-E/PF | dsPIC33FJ256GP610A-H/PF | PIC24HJ128GP610A-H/PF | PIC24HJ256GP610A-I/PT | PIC24HJ256GP210A-H/PF |
|---|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-100 (14x14) | TQFP-100 (14x14) - same | TQFP-100 (14x14) - same | TQFP-100 (14x14) - same | TQFP-100 (14x14) - same | TQFP-100 (12x12) - pin-compatible electrically | TQFP-100 (14x14) - same |
| Core Architecture | PIC24H 16-bit, 40 MIPS | PIC24H 16-bit, 40 MIPS | PIC24H 16-bit, 40 MIPS | dsPIC33F 16-bit + DSP, 40 MIPS | PIC24H 16-bit, 40 MIPS | PIC24H 16-bit, 40 MIPS | PIC24H 16-bit, 40 MIPS |
| Flash Memory | 256 KB | 256 KB | 256 KB | 256 KB | 128 KB (-50%) | 256 KB | 256 KB |
| SRAM | 16 KB | 16 KB | 16 KB | 16 KB | 8 KB (-50%) | 16 KB | 16 KB |
| Operating Temperature | -40C to +150C (H grade) | -40C to +85C (I grade) | -40C to +125C (E grade) | -40C to +150C (H grade) | -40C to +150C (H grade) | -40C to +85C (I grade) | -40C to +150C (H grade) |
| AEC-Q100 Qualified | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| DSP Engine | No | No | No | Yes (hardware MAC, dual 40-bit accumulators) | No | No | No |
Ключевые отличия
- Highest operating temperature grade in family (против PIC24HJ256GP610A-I/PF)
- 256 KB Flash matches sub-family maximum (против PIC24HJ128GP610A-H/PF)
- Same TQFP-100 pinout as dsPIC33F DSP variant (против dsPIC33FJ256GP610A-H/PF)
Заметки по проектированию
Estimated: At 40 MIPS core activity and 3.3 V supply, the PIC24HJ256GP610A-H/PF core I_DD is approximately 50-70 mA depending on peripheral use. Provide a low-noise 3.3 V LDO such as the MCP1755 (500 mA) or a switching regulator with adequate input/output capacitance. Decouple every VDD pin with a 0.1 uF ceramic placed within 5 mm of the pin, and place a bulk 4.7-10 uF tantalum or ceramic near the package. Tie all unused VDD pins to the supply, and all unused AVDD pins to the analog supply to ensure proper ADC operation.
The TQFP-100 (14x14 mm) package requires careful PCB layout to maintain signal integrity on the high-speed oscillator and ECAN lines. Route the crystal traces (OSC1/OSC2) as short as possible with guard traces to ground, and keep them away from switching power traces. Use a four-layer PCB with a dedicated ground plane under the MCU; the exposed thermal pad (where present on variants) must be soldered to a copper pour connected to VSS for thermal dissipation. Place the programming/debug header (PGECx/PGEDx) close to the MCU to allow reliable in-circuit debugging with MPLAB ICD 3 or PICkit 4.
Do not apply signals to any pin before VDD has reached its operating range; this can cause latch-up via the ESD protection diodes. The remappable peripheral pins (RPx) require the Peripheral Pin Select (PPS) registers to be configured in firmware before use - failing to do so leaves the pin in GPIO mode. When migrating from -I to -H grade, verify your application's ambient temperature does not exceed 85C, otherwise specify the -H grade from the start. For automotive designs, always use the AEC-Q100 qualified -H/PF variant rather than the industrial -I/PF.
Estimated: At maximum rated junction temperature of 150C and typical 50 mA active current at 3.3 V, the PIC24HJ256GP610A-H/PF dissipates 0.165 W. The TQFP-100 (14x14 mm) junction-to-ambient thermal resistance (theta_JA) is approximately 50 C/W on a standard 4-layer JEDEC test PCB, allowing operation at 150C junction with ambient up to ~138C. In practice, design for junction below 125C to maintain margin; add a thermal copper pour under the package connected to VSS to reduce theta_JA in still-air enclosures. For forced-air or sealed-box installations, derate further based on measured delta-JA.
Информация о соответствии
AEC-Q100 qualified per Microchip product documentation. RoHS compliant per Microchip product page. REACH compliant per Microchip product page. Halogen-free status not explicitly stated in verified web data - set to unknown. Conflict minerals reporting compliant per Microchip policy.
