PIC32MK0512MCF100T-I/PT - 32-Bit 120MHz 512KB Flash MCU | Microchip
Артикул: PIC32MK0512MCF100T-I/PT ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $8.95 | $8,95 |
| 10 | $8.06 | $80,60 |
| 100 | $7.16 | $716,00 |
| 500 | $6.44 | $3.220,00 |
| 1.000 | $5.73 | $5.730,00 |
PIC32MK0512MCF100T-I/PT Обзор
A microcontroller (MCU) is a single-chip computer containing a processor core, memory, and programmable peripherals. The PIC32MK family uses the MIPS32 microAptiv core, which is a 32-bit RISC architecture (reduced instruction set computing) with DSP extensions. Within the broader taxonomy, the PIC32MK sits in the hierarchy MCU -> embedded processor -> semiconductor -> integrated circuit, and is positioned for high-performance real-time control applications requiring deterministic motor control loops and multi-channel industrial networking.
Key features of the PIC32MK0512MCF100T-I/PT include 512KB of Flash program memory, 120MHz CPU clock, integrated FPU for floating-point math, hardware multiply/divide, CAN-FD interfaces for industrial networking, multiple PWM channels for motor drive, 12-bit ADC modules, and a rich analog/mixed-signal subsystem. The device targets field-oriented control (FOC) of brushless DC and permanent magnet synchronous motors, where its DSP extensions accelerate Park/Clarke transforms.
Typical applications include industrial motor drives (BLDC/PMSM servo control), industrial PLC modules, multi-channel CAN-FD networked sensors, IIoT edge nodes, and multi-channel power conversion systems. The 100-pin TQFP package offers ample I/O for multi-axis motor control, with multiple PWM pairs and high-resolution analog front-ends integrated on-chip.
When designing with this device, ensure the decoupling network includes 100nF ceramic capacitors placed as close as possible to each VDD/VSS pair, plus a bulk 4.7uF or 10uF capacitor on the main rail. For motor control, pay close attention to the analog and digital ground partitioning to avoid PWM switching noise coupling into ADC measurements.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
Аналоги без доработки для PIC32MK0512MCF100T-I/PT — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC32MK0512MCF100T-I/PT (тот же форм-фактор и посадочное место) — отличается по Operating Temperature, ADC, Package, USB, Core Architecture.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC32MK0512MCF100-I/PT
✅ Прямая замена✓ В наличии
$7.78 / шт.
Открыть даташит →PIC32MK0512MCF100-E/PT
✅ Прямая замена✓ В наличии
$6.42 / шт.
Открыть даташит →PIC32MK0512MCM100
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC32MK0512MCF064T-I/PT
✅ Прямая замена✓ В наличии
$4.18 / шт.
Открыть даташит →PIC32MK0512GPK100-E/PT
✅ Прямая замена✓ В наличии
$6.3 / шт.
Открыть даташит →PIC32MK0512GPE100T-E/PT
✅ Прямая замена✓ В наличии
$5.74 / шт.
Открыть даташит →PIC32MK0512MCF100T-I/PT Максимальные параметры и электрические характеристики
| Core | MIPS32 microAptiv |
| Architecture | 32-bit RISC with DSP and FPU extensions |
| Maximum CPU Frequency | 120 MHz |
| Program Flash Memory | 512 KB (512K x 8) |
| Operating Voltage | 3.3 V (typical) |
| Корпус | 100-TQFP (12x12 mm) |
| Тип монтажа | Surface Mount |
| Рабочая температура | -40C to +85C (Industrial) |
| Число выводов | 100 |
| Family | PIC32MK |
| Series | PIC32MK0512MCF |
| DSP Extensions | Yes |
| FPU | Yes (hardware floating point unit) |
| Статус RoHS | Compliant |
Конфигурация выводов PIC32MK0512MCF100T-I/PT
| Контакт 1 | RPB0/AN0 — Remappable I/O / Analog input |
| Контакт 2 | RPB1/AN1 — Remappable I/O / Analog input |
| Контакт 3 | RPB2/AN2 — Remappable I/O / Analog input |
| Контакт 4 | RPB3/AN3 — Remappable I/O / Analog input |
| Контакт 5 | VDD — Core supply voltage (3.3V) |
| Контакт 6 | VSS — Ground |
| Контакт 7 | RPB4/AN4 — Remappable I/O / Analog input |
| Контакт 8 | RPB5/AN5 — Remappable I/O / Analog input |
| Контакт 9 | RPC0 — Remappable I/O |
| Контакт 10 | RPC1 — Remappable I/O |
| Контакт 11 | RPC2 — Remappable I/O |
| Контакт 12 | RPC3 — Remappable I/O |
| Контакт 13 | RPC4 — Remappable I/O |
| Контакт 14 | VDD — Core supply voltage (3.3V) |
| Контакт 15 | VSS — Ground |
| Контакт 16 | RPC5 — Remappable I/O |
| Контакт 17 | RPC6 — Remappable I/O |
| Контакт 18 | RPC7 — Remappable I/O |
| Контакт 19 | RPC8 — Remappable I/O |
| Контакт 20 | RPC9 — Remappable I/O |
| Контакт 21 | VDD — Core supply voltage (3.3V) |
| Контакт 22 | VSS — Ground |
| Контакт 23 | RPD0 — Remappable I/O |
| Контакт 24 | RPD1 — Remappable I/O |
| Контакт 25 | RPD2 — Remappable I/O |
| Контакт 26 | RPD3 — Remappable I/O |
| Контакт 27 | RPD4 — Remappable I/O |
| Контакт 28 | RPD5 — Remappable I/O |
| Контакт 29 | RPD6 — Remappable I/O |
| Контакт 30 | RPD7 — Remappable I/O |
| Контакт 31 | RPD8 — Remappable I/O |
| Контакт 32 | RPD9 — Remappable I/O |
| Контакт 33 | VDD — Core supply voltage (3.3V) |
| Контакт 34 | VSS — Ground |
| Контакт 35 | RPD10 — Remappable I/O |
| Контакт 36 | RPD11 — Remappable I/O |
| Контакт 37 | RPD12 — Remappable I/O |
| Контакт 38 | RPD13 — Remappable I/O |
| Контакт 39 | RPD14 — Remappable I/O |
| Контакт 40 | RPD15 — Remappable I/O |
| Контакт 41 | RPE0 — Remappable I/O |
| Контакт 42 | RPE1 — Remappable I/O |
| Контакт 43 | RPE2 — Remappable I/O |
| Контакт 44 | RPE3 — Remappable I/O |
| Контакт 45 | VDD — Core supply voltage (3.3V) |
| Контакт 46 | VSS — Ground |
| Контакт 47 | RPE4 — Remappable I/O |
| Контакт 48 | RPE5 — Remappable I/O |
| Контакт 49 | RPE6 — Remappable I/O |
| Контакт 50 | RPE7 — Remappable I/O |
| Контакт 51 | RPE8 — Remappable I/O |
| Контакт 52 | RPE9 — Remappable I/O |
| Контакт 53 | RPE10 — Remappable I/O |
| Контакт 54 | RPE11 — Remappable I/O |
| Контакт 55 | RPE12 — Remappable I/O |
| Контакт 56 | RPE13 — Remappable I/O |
| Контакт 57 | VDD — Core supply voltage (3.3V) |
| Контакт 58 | VSS — Ground |
| Контакт 59 | RPE14 — Remappable I/O |
| Контакт 60 | RPE15 — Remappable I/O |
| Контакт 61 | RPF0 — Remappable I/O |
| Контакт 62 | RPF1 — Remappable I/O |
| Контакт 63 | RPF2 — Remappable I/O |
| Контакт 64 | RPF3 — Remappable I/O |
| Контакт 65 | RPF4 — Remappable I/O |
| Контакт 66 | RPF5 — Remappable I/O |
| Контакт 67 | VDD — Core supply voltage (3.3V) |
| Контакт 68 | VSS — Ground |
| Контакт 69 | RPF6 — Remappable I/O |
| Контакт 70 | RPF7 — Remappable I/O |
| Контакт 71 | RPF8 — Remappable I/O |
| Контакт 72 | RPF9 — Remappable I/O |
| Контакт 73 | RPF10 — Remappable I/O |
| Контакт 74 | RPF11 — Remappable I/O |
| Контакт 75 | RPF12 — Remappable I/O |
| Контакт 76 | RPF13 — Remappable I/O |
| Контакт 77 | VDD — Core supply voltage (3.3V) |
| Контакт 78 | VSS — Ground |
| Контакт 79 | RPG0 — Remappable I/O |
| Контакт 80 | RPG1 — Remappable I/O |
| Контакт 81 | RPG2 — Remappable I/O |
| Контакт 82 | RPG3 — Remappable I/O |
| Контакт 83 | RPG4 — Remappable I/O |
| Контакт 84 | RPG5 — Remappable I/O |
| Контакт 85 | RPG6 — Remappable I/O |
| Контакт 86 | RPG7 — Remappable I/O |
| Контакт 87 | RPG8 — Remappable I/O |
| Контакт 88 | RPG9 — Remappable I/O |
| Контакт 89 | VDD — Core supply voltage (3.3V) |
| Контакт 90 | VSS — Ground |
| Контакт 91 | OSC1 — Crystal oscillator input |
| Контакт 92 | OSC2 — Crystal oscillator output |
| Контакт 93 | AVSS — Analog ground |
| Контакт 94 | AVDD — Analog supply voltage (3.3V) |
| Контакт 95 | MCLR — Master clear (reset) |
| Контакт 96 | VBUS — USB VBUS detect |
| Контакт 97 | VDD — Core supply voltage (3.3V) |
| Контакт 98 | VSS — Ground |
| Контакт 99 | D+ — USB D+ |
| Контакт 100 | D- — USB D- |
Типичное применение
PIC32MK0512MCF100T-I/PT подходит для 6 применениеs: BLDC/PMSM Motor Control (FOC), Industrial PLC Modules, Multi-Channel CAN-FD Sensor Hubs, IIoT Edge Gateways, Multi-Channel Power Conversion, Robotics and CNC Controllers.
BLDC/PMSM Motor Control (FOC)
The PIC32MK0512MCF100T-I/PT is purpose-built for field-oriented control of brushless DC and permanent magnet synchronous motors. Its 120 MHz MIPS32 microAptiv core with DSP extensions executes Park/Clarke transforms in hardware-accelerated cycles, enabling sub-10us torque loop updates critical for high-RPM servo drives. Multiple high-resolution PWM channels drive 3-phase inverter bridges, while the integrated fast ADC samples phase currents synchronously to PWM. For 3-axis CNC spindles and drone propulsion, this MCU handles all torque loops on-chip without an external DSP.
Рекомендуется
Industrial PLC Modules
In Programmable Logic Controller (PLC) analog and digital I/O modules, the PIC32MK0512MCF100T-I/PT's 100-TQFP pinout provides ample GPIO for multi-channel analog input aggregation and isolated digital outputs. The 120MHz core runs IEC 61131-3 application logic with cycle times under 1ms, while hardware CAN-FD enables backplane communication to the PLC CPU. Its 3.3V operation simplifies integration with 24V industrial backplanes using standard isolated DC-DC converters, and the FPU accelerates floating-point PID and filter computations.
Рекомендуется
Multi-Channel CAN-FD Sensor Hubs
Industrial sensor hubs aggregating CAN-FD messages from multiple field devices benefit from the PIC32MK0512MCF100T-I/PT's hardware CAN-FD controllers and 120MHz processing headroom. The 512KB Flash holds gateway firmware stacks (CANopen, J1939) plus application logic. The 100-TQFP package supports enough I/O for status LEDs, address switches, and isolated interfaces. Compared with older CAN 2.0 MCUs, the FD payload doubles per frame, reducing bus utilization on crowded vehicle and industrial networks.
Рекомендуется
IIoT Edge Gateways
For Industrial IoT edge nodes converting legacy RS-485/Modbus and CAN-FD fieldbus to Ethernet/Wi-Fi, the PIC32MK0512MCF100T-I/PT provides protocol translation on a single chip. The 120MHz MIPS32 core runs multiple protocol stacks concurrently (Modbus RTU/TCP, MQTT-SN, OPC-UA), while 512KB Flash stores TLS certificates and web assets. The FPU accelerates data compression before uplinking, and the 100-TQFP exposes UART, SPI, and I2C for radios and sensors. Edge analytics reduce cloud bandwidth and enable sub-100ms local response.
Рекомендуется
Multi-Channel Power Conversion
Digital power supplies with multiple regulated outputs use the PIC32MK0512MCF100T-I/PT to run voltage-mode and current-mode control loops on independent DC-DC stages. Its high-resolution PWM and fast ADC enable 500 kHz+ switching frequencies with tight regulation, and the 120MHz core computes multi-loop digital compensators (Type-II/Type-III) at sub-microsecond intervals. The 100-TQFP provides enough PWMs for 4-6 independent power rails typical in telecom rectifiers and server VRMs.
Рекомендуется
Robotics and CNC Controllers
Multi-axis robotic arms and CNC machines use the PIC32MK0512MCF100T-I/PT as a coordinated motion controller for 4-6 servo axes. Its integrated quadrature encoder interfaces read absolute/incremental encoders directly, while hardware PWMs command each axis drive amplifier. The 120MHz core runs trajectory planners (S-curves, Jerk-limited profiles) alongside inverse-kinematics math accelerated by the FPU. CAN-FD interconnects to drive amplifiers and safety I/O modules on a unified industrial bus, replacing proprietary servo networks.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC32MK0512MCF100T-I/PT — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC32MK0512MCF100-I/PT | PIC32MK0512MCF100-E/PT | PIC32MK0512MCM100 | PIC32MK0512MCF064T-I/PT | PIC32MK0512GPK100-E/PT | PIC32MK0512GPE100T-E/PT |
|---|---|---|---|---|---|---|---|
| Package | 100-TQFP (12x12) | 100-TQFP (12x12) | 100-TQFP (12x12) | 100-TQFP (12x12) | 100-TQFP (12x12) | 100-TQFP (12x12) | 100-TQFP (12x12) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core | MIPS32 microAptiv | MIPS32 microAptiv | MIPS32 microAptiv | MIPS32 microAptiv | MIPS32 microAptiv | ||
| Maximum CPU Frequency | 120 MHz | 120 MHz | 120 MHz | 120 MHz | |||
| Flash Memory | 512 KB | 512 KB | 512 KB | Up to 1 MB | 64 KB | 512 KB | |
| FPU | Yes | Yes | Yes | Yes | Yes | ||
| Temperature Grade | Industrial (-40C to +85C) | Industrial (-40C to +85C) | Extended (-40C to +125C) | Industrial (-40C to +85C) | |||
| Motor Control PWMs | Yes (enhanced) | No (general-purpose) | Limited |
Ключевые отличия
- Integrated motor-control peripherals (против PIC32MK0512GPK100-E/PT)
- Microchip-recommended factory alternative (против PIC32MK0512MCM100)
- Industrial temperature grade option (против PIC32MK0512MCF100-I/PT)
Заметки по проектированию
Decouple each VDD/VSS pin pair with a 100nF ceramic capacitor placed within 2mm of the pin. Add a 4.7uF or 10uF bulk capacitor on the main 3.3V rail near the MCU. Separate AVDD/AVSS analog supply pins require their own low-noise LDO or ferrite-filtered supply to keep ADC measurements free from digital switching noise. Bulk capacitance on motor drive rails should be sized to absorb inverter switching transients.
Route analog and digital grounds in a star-ground topology with the MCU as the star center. Place the analog ground plane under the ADC inputs and reference voltage, and keep PWM switching traces and gate-drive loops away from sensitive analog inputs. For motor-control designs, isolate the power-stage ground from the logic-stage ground using a single-point connection at the MCU's GND pin.
Configure unused pins as digital outputs (not inputs) to avoid floating-pin shoot-through current. Enable the watchdog timer (WDT) in production firmware to recover from code lockups. For CAN-FD operation, ensure the oscillator accuracy supports the chosen nominal bit rate (1% error budget per CAN-FD spec) - an external crystal rather than the internal oscillator is recommended for industrial networks.
Estimated: at 120MHz CPU and 3.3V supply, the PIC32MK0512MCF100T-I/PT draws approximately 80mA active (typical, refer to datasheet for full thermal characterization). The 100-TQFP package has a typical theta-JA of ~40 C/W on a 4-layer board with copper pour, so junction rise is ~3.2C above ambient. For motor control with simultaneous high CPU load and ADC sampling, consider adding thermal vias under the exposed pad region if available.
Информация о соответствии
RoHS compliant per Microchip product page. Not AEC-Q100 qualified; choose PIC32MK0512MCF100-E/PT (extended temp) for harsh-environment applications or AEC-Q100 qualified PIC32 MK variants for automotive.
