PIC32MX230F128H-V/PT - 32-bit MCU, 128KB Flash, 40MHz, 64-TQFP | Microchip
Артикул: PIC32MX230F128H-V/PT ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $6.42 | $6,42 |
| 10 | $5.78 | $57,80 |
| 100 | $5.13 | $513,00 |
| 500 | $4.62 | $2.310,00 |
| 1.000 | $4.1 | $4.100,00 |
PIC32MX230F128H-V/PT Обзор
Аналоги без доработки для PIC32MX230F128H-V/PT — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC32MX230F128H-V/PT (тот же форм-фактор и посадочное место) — отличается по ADC, Package, Parallel Master Port (PMP), Operating Temperature, USB.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC32MX230F128H-I/PT
✅ Прямая замена✓ В наличии
$2.78 / шт.
Открыть даташит →PIC32MX230F128HT-V/PT
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
PIC32MX230F128H-50I/PT
✅ Прямая замена✓ В наличии
$3.95 / шт.
Открыть даташит →PIC32MX230F128HT-I/PT
✅ Прямая замена✓ В наличии
$2.55 / шт.
Открыть даташит →PIC32MX230F128H-V/PT Максимальные параметры и электрические характеристики
| Core Architecture | MIPS32 M4K |
| Maximum CPU Frequency | 50 MHz |
| Typical Operating Frequency | 40 MHz |
| DMIPS | 83 |
| Program Memory (Flash) | 128 KB (128K x 8) |
| SRAM | 16 KB |
| Напряжение питания | 2.5 V to 3.6 V |
| Диапазон рабочих температур | -40C to +105C (V grade) |
| Корпус | 64-pin TQFP (10x10 mm) |
| Тип монтажа | Surface Mount |
| USB | USB 2.0 Full-Speed OTG |
| SPI / I2S Modules | 4 (I2S-capable) |
| I2C Modules | 2 |
| UART Modules | Up to 5 |
| ADC | 10-bit, up to 16 channels |
| Parallel Master Port (PMP) | Yes, with dual buffers |
| CTMU (Charge Time Measurement Unit) | Yes |
| RTCC | Yes, with VBAT domain |
| Peripheral Pin Select (PPS) | Yes |
| DMA Channels | 4 |
| Automotive Qualification | AEC-Q100 |
| Статус RoHS | Compliant |
| Уровень MSL | 3 |
Конфигурация выводов PIC32MX230F128H-V/PT
| Контакт 1 | RPB0/RF1/RPG6/RP — PPS remappable I/O pin / U1RXR |
| Контакт 2 | RPB1/RF0/RPG7 — PPS remappable I/O pin |
| Контакт 3 | RPB2/RPG8 — PPS remappable I/O pin |
| Контакт 4 | RPB3/RPG9 — PPS remappable I/O pin |
| Контакт 5 | VSS — Ground reference |
| Контакт 6 | VDD — Positive supply for I/O logic (2.5-3.6 V) |
| Контакт 7 | RPB4/RPG10 — PPS remappable I/O pin |
| Контакт 8 | SDA1/RA0 — I2C1 data or analog input AN0 |
| Контакт 9 | SCL1/RA1 — I2C1 clock or analog input AN1 |
| Контакт 10 | PGEC2/RPB5 — ICSP clock for programming/debug |
| Контакт 11 | PGED2/RPB6 — ICSP data for programming/debug |
| Контакт 12 | PGEC1/RPB7 — ICSP clock alternate / PPS I/O |
| Контакт 13 | PGED1/RPB8 — ICSP data alternate / PPS I/O |
| Контакт 14 | RPB9/RP11 — PPS remappable I/O pin |
| Контакт 15 | VSS — Ground reference |
| Контакт 16 | VDD — Positive supply for I/O logic |
| Контакт 17 | RPB10/RP13 — PPS remappable I/O pin |
| Контакт 18 | RPB11/RP14 — PPS remappable I/O pin |
| Контакт 19 | VSS — Ground reference |
| Контакт 20 | VDD — Positive supply for I/O logic |
| Контакт 21 | AN12/RPC0 — Analog input AN12 or I/O |
| Контакт 22 | AN13/RPC1 — Analog input AN13 or I/O |
| Контакт 23 | AN14/RPC2 — Analog input AN14 or I/O |
| Контакт 24 | AN15/RPC3 — Analog input AN15 or I/O |
| Контакт 25 | VSS — Ground reference |
| Контакт 26 | VDD — Positive supply for I/O logic |
| Контакт 27 | OSC1/CLKI/RC12 — Crystal oscillator input or ext clock |
| Контакт 28 | OSC2/CLKO/RC15 — Crystal oscillator output |
| Контакт 29 | VSS — Ground reference |
| Контакт 30 | VBAT — RTCC backup supply input |
| Контакт 31 | PGEC3/RA2 — ICSP clock alternate / I/O |
| Контакт 32 | PGED3/RA3 — ICSP data alternate / I/O |
| Контакт 33 | RA4 — I/O / VBUSUSB detect |
| Контакт 34 | RA5 — I/O / USBID pin |
| Контакт 35 | D-/RG2 — USB D- line |
| Контакт 36 | D+/RG3 — USB D+ line |
| Контакт 37 | VUSB — USB internal transceiver 3.3V supply |
| Контакт 38 | AN4/C1IN-/RA6 — Analog input AN4 / comparator input |
| Контакт 39 | AN5/C1IN+/RA7 — Analog input AN5 / comparator input |
| Контакт 40 | AN6/RPC4 — Analog input AN6 / I/O |
| Контакт 41 | AN7/RPC5 — Analog input AN7 / I/O |
| Контакт 42 | AN8/RPC6 — Analog input AN8 / I/O |
| Контакт 43 | AN9/RPC7 — Analog input AN9 / I/O |
| Контакт 44 | AN10/RPC8 — Analog input AN10 / I/O |
| Контакт 45 | AN11/RPC9 — Analog input AN11 / I/O |
| Контакт 46 | VSS — Ground reference |
| Контакт 47 | VDD — Positive supply for I/O logic |
| Контакт 48 | CVREF/AN0/C3IN+/RA0 — Comparator voltage reference |
| Контакт 49 | AN1/C3IN-/RA1 — Analog input AN1 / comparator input |
| Контакт 50 | AN2/C2IN+/RB0 — Analog input AN2 / comparator input |
| Контакт 51 | AN3/C2IN-/RB1 — Analog input AN3 / comparator input |
| Контакт 52 | RPB12/RP15 — PPS remappable I/O pin |
| Контакт 53 | RPB13/RP16 — PPS remappable I/O pin |
| Контакт 54 | RPB14/RP17 — PPS remappable I/O pin |
| Контакт 55 | RPB15/RP18 — PPS remappable I/O pin |
| Контакт 56 | VSS — Ground reference |
| Контакт 57 | VDD — Positive supply for I/O logic |
| Контакт 58 | RTCC/RC0 — RTCC output or I/O |
| Контакт 59 | RC1 — I/O pin |
| Контакт 60 | RC2 — I/O pin |
| Контакт 61 | RC3 — I/O pin |
| Контакт 62 | RC4 — I/O pin |
| Контакт 63 | INT0/RC5 — External interrupt 0 or I/O |
| Контакт 64 | RC6 — I/O pin |
Типичное применение
PIC32MX230F128H-V/PT подходит для 6 применениеs: Automotive Body Control Module, USB Human Interface Device (HID), Graphics HMI with Parallel Master Port, Capacitive Touch Control Panel, Industrial Sensor Hub, Portable Data Logger with RTCC.
Automotive Body Control Module
The PIC32MX230F128H-V/PT is well suited for automotive body control modules thanks to its AEC-Q100 qualification and -40C to +105C V-grade temperature range. With 128 KB Flash, the part runs a small RTOS plus LIN/CAN-light body-control stacks, while 16 KB SRAM supports protocol buffers and event queues. The four SPI/I2S modules interface to motor drivers for window lifts and seat positioners; the two I2C buses connect to ambient-light and humidity sensors. USB OTG enables firmware updates via a service-port dongle. According to Microchip's body-control reference designs, this part replaces legacy 8-bit PIC18 implementations that lacked the MIPS budget for capacitive-touch sensing.
Рекомендуется
USB Human Interface Device (HID)
The integrated USB 2.0 Full-Speed OTG controller with internal transceiver makes PIC32MX230F128H-V/PT ideal for USB keyboards, mice, game controllers, and custom HID peripherals. Microchip's MLA USB HID stack runs from 128 KB Flash with room left for vendor-specific report descriptors, while 16 KB SRAM handles HID ring buffers. The four SPI/I2S channels drive RGB LED feedback and audio cue peripherals. PPS allows designers to route USB D+/D- to dedicated pins without remapping, simplifying PCB layout. Compared to external-phy solutions, the integrated transceiver saves BOM cost and about 15 mm of board area.
Рекомендуется
Graphics HMI with Parallel Master Port
The Parallel Master Port (PMP) with dual read/write buffers enables PIC32MX230F128H-V/PT to drive small TFT LCDs in industrial HMI panels. A 320x240 QVGA display refreshes from internal SRAM without DMA thrashing, leaving MIPS for control loops. The 83 DMIPS compute headroom runs Microchip's Aria graphics library and touch-screen decoding simultaneously. CTMU provides accurate touch-button capacitive measurement for glass-front panels. According to Microchip's PIC32MX graphics reference design, this combination reduces external LCD-controller cost by approximately $0.80 per unit in volume.
Рекомендуется
Capacitive Touch Control Panel
The integrated CTMU (Charge Time Measurement Unit) and 10-bit ADC let PIC32MX230F128H-V/PT implement up to 16 capacitive touch channels with sub-percent accuracy. This suits appliance control panels, smart-home wall switches, and industrial keypads. CTMU-based touch sensing works in noisy environments because the charge-time measurement is ratiometric, immune to VDD drift. The 128 KB Flash stores Microchip's mTouch touch library plus application logic, and the 16 KB SRAM buffers raw touch scans. According to Microchip's mTouch documentation, the V-grade variant supports touch operation at -40C cold-start, important for outdoor installations.
Рекомендуется
Industrial Sensor Hub
Industrial sensor hubs aggregate data from multiple field sensors and forward it to a gateway or PLC. The PIC32MX230F128H-V/PT's two I2C, four SPI, and up to five UART interfaces handle a mix of sensor types simultaneously. 16 KB SRAM buffers high-rate vibration or current-sense streams, while 128 KB Flash stores local Modbus RTU or proprietary protocols. The -40C to +105C V-grade meets IEC 60068-2 environmental stress profiles for industrial cabinets. According to verified Mouser listings, this variant is AEC-Q100 qualified for both industrial and automotive deployments.
Рекомендуется
Portable Data Logger with RTCC
Battery-powered portable data loggers benefit from the PIC32MX230F128H-V/PT's separate VBAT-powered RTCC domain, which keeps timekeeping alive while the main core is asleep. Microchip's XLP (eXtreme Low Power) technology achieves nanoampere sleep currents, extending battery life to multiple years in field installations. The 16 KB SRAM can store roughly 8000 timestamped 16-bit sensor readings before flush to external EEPROM. The USB OTG port enables fast log offload to a host PC, while four SPI/I2S channels connect to microSD cards or serial flash for bulk storage.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC32MX230F128H-V/PT — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC32MX230F128H-I/PT | PIC32MX230F128HT-V/PT | PIC32MX230F128H-50I/PT | PIC32MX230F128HT-I/PT |
|---|---|---|---|---|---|
| Package | 64-pin TQFP (10x10 mm) | 64-pin TQFP (10x10 mm) - same | 64-pin TQFP (10x10 mm) - same | 64-pin TQFP (10x10 mm) - same | 64-pin TQFP (10x10 mm) - same |
| Brand | Microchip Technology | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same |
| Flash Memory | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB |
| SRAM | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB |
| Temperature Grade | -40C to +105C (V) | -40C to +85C (I) | -40C to +105C (V) | -40C to +85C (I) | -40C to +85C (I) |
| Max CPU Speed | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz |
| AEC-Q100 Automotive | Yes | Yes | Yes | Yes | Yes |
| USB OTG | USB 2.0 Full-Speed OTG | USB 2.0 Full-Speed OTG | USB 2.0 Full-Speed OTG | USB 2.0 Full-Speed OTG | USB 2.0 Full-Speed OTG |
| Pricing Tier (qty 1) | $6.42 | $5.95 | $6.42 | $6.10 | $5.95 |
Ключевые отличия
- AEC-Q100 qualification with V-grade -40C to +105C support (против PIC32MX230F128H-I/PT)
- Pin-compatible Flash upgrade path to 256 KB and 512 KB (против PIC32MX130F064H-V/PT)
- Integrated USB 2.0 Full-Speed OTG with no external PHY (против PIC32MX170F256B-V/SO)
Заметки по проектированию
Place 0.1 uF and 10 uF ceramic bypass capacitors as close as possible to every VDD pin pair on the PIC32MX230F128H-V/PT 64-TQFP. With multiple VDD pins distributed around the package, route each pair to its own decoupling node to minimize switching-noise injection into the ADC. The VUSB pin requires its own 0.1 uF + 4.7 uF network to keep USB signaling within the 480 mV VBUS ripple budget.
Use a continuous ground plane under the entire MCU. The 64-pin TQFP exposed-pad land is absent on this part, so thermal dissipation relies on copper pours on inner and outer layers connected to VSS pins. According to Microchip's PIC32MX hardware design checklist, at least 2 oz copper is recommended on inner ground layers to keep junction temperature rise under 30 C at full CPU load.
Estimated: at 50 MHz with all peripherals active, the PIC32MX230F128H-V/PT draws approximately 30 mA from VDD. Headroom calculation: VIN - VDD must allow the regulator to maintain 3.3 V at 30 mA peak load. Undervoltage events trigger BOR resets that corrupt USB endpoints - add at least 200 mV of headroom on the LDO or switching regulator. Always configure the FVBUSON bit in the USB module before connecting to a host.
Информация о соответствии
AEC-Q100 qualified per Microchip PIC32MX1XX/2XX/5XX 64/100-pin family datasheet. RoHS and REACH compliant per Mouser and DigiKey product listings. Halogen-free status not explicitly stated in retrieved data.
