PIC32MX230F128HT-I/PT - 32-bit 50MHz 128KB Flash MCU | Microchip
Артикул: PIC32MX230F128HT-I/PT ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $4.62 | $4,62 |
| 10 | $4.18 | $41,80 |
| 100 | $3.71 | $371,00 |
| 500 | $3.29 | $1.645,00 |
| 1.000 | $2.92 | $2.920,00 |
| 3.000 | $2.55 | $7.650,00 |
PIC32MX230F128HT-I/PT Обзор
A 32-bit microcontroller is an integrated circuit combining a 32-bit CPU core, program memory (Flash), data memory (SRAM), and configurable peripherals on a single silicon die. Within the broader taxonomy, this places the part as a microcontroller -> embedded processor -> system-on-chip (SoC) -> semiconductor IC. The PIC32MX family specifically targets cost-sensitive embedded applications that require USB connectivity, digital audio, and human-machine interface (HMI) features without the overhead of higher-end Cortex-M parts.
Key features include a 1.25 DMIPS/MHz MIPS32 M4K core, single-cycle multiplication and division, a 5-stage pipeline, and up to 51 GPIO pins. The device also includes three SPI/I2S modules, two UART modules, two I2C modules, five 16-bit timers/counters, and a 16-channel DMA controller. An 8-bit Parallel Master Port (PMP) supports external memory or graphics displays. The internal 8 MHz Fast RC oscillator with PLL provides flexible clocking, and an on-chip LDO regulator simplifies single-rail 2.5 V/3.3 V designs.
The architecture uses a Harvard-style bus with separate Flash and SRAM buses, enabling simultaneous instruction fetch and data access for predictable interrupt latency. The USB 2.0 full-speed PHY is integrated on-chip, eliminating external transceiver components. The CTMU peripheral enables capacitive touch sensing for buttons, sliders, and proximity detection, while the RTCC maintains accurate timekeeping with backup battery domain. The 10-bit ADC with DMA support enables high-throughput sensor sampling at up to 1 Msps.
Typical applications include USB peripherals (HID, CDC, mass storage), consumer audio products (MP3 players, headphones, soundbars), home appliances with capacitive touch user interfaces, industrial control panels, medical monitoring devices, and low-cost HMI designs with graphics LCD support. The combination of USB, CTMU, and I2S makes it particularly suited for connected audio appliances and USB-charging smart-home hubs.
When designing with this part, allocate PCB footprint for the 10x10 mm TQFP body with 0.5 mm pitch and ensure the USB D+/D- traces are routed as a 90 ohm differential pair. Decouple VDD with 100 nF and 4.7 uF capacitors placed within 3 mm of each supply pin, and provide a 4.7 kohm pull-up on D+ for full-speed USB enumeration.
This page synthesizes distributor pricing, verified drop-in alternatives from the same PIC32MX family, and practical PCB design notes not found in the manufacturer datasheet alone.
Аналоги без доработки для PIC32MX230F128HT-I/PT — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC32MX230F128HT-I/PT (тот же форм-фактор и посадочное место) — отличается по ADC, Package, Parallel Master Port (PMP), USB, Maximum CPU Speed.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC32MX230F128H-I/PT
✅ Прямая замена✓ В наличии
$2.78 / шт.
Открыть даташит →PIC32MX230F128HT-50I/PT
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC32MX130F128HT-I/PT
✅ Прямая замена✓ В наличии
$2.35 / шт.
Открыть даташит →PIC32MX150F128HT-I/PT
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC32MX170F256H-V/PT
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC32MX230F128HT-V/PT
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC32MX230F128HT-I/PT Максимальные параметры и электрические характеристики
| Core Architecture | MIPS32 M4K 32-bit RISC |
| Maximum CPU Speed | 50 MHz |
| Flash Program Memory | 128 KB |
| SRAM Data Memory | 16 KB |
| Operating Voltage Range | 2.3 V to 3.6 V |
| Корпус | 64-pin TQFP (PT) 10x10 mm |
| Тип монтажа | Surface Mount |
| USB Interface | USB 2.0 Full-Speed Device/Host/OTG |
| ADC | 10-bit, up to 28 channels, 1 Msps |
| GPIO Count | 51 (multiplexed) |
| UART | 2 modules |
| SPI / I2S | 3 modules (SPI or I2S configurable) |
| I2C | 2 modules |
| Timers | 5 x 16-bit |
| DMA Channels | 16 |
| CTMU (Capacitive Touch) | Yes, on-chip |
| RTCC (Real-Time Clock) | Yes, with backup battery domain |
| Parallel Master Port (PMP) | 8-bit, for external memory/graphics |
| Рабочая температура | -40 C to +85 C (Industrial) |
| Уровень MSL | 3 (168 hours) |
| Статус RoHS | Compliant |
Конфигурация выводов PIC32MX230F128HT-I/PT
| Контакт 1 | SDA2/RA0 — I2C2 data / GPIO RA0 |
| Контакт 2 | SCL2/RA1 — I2C2 clock / GPIO RA1 |
| Контакт 3 | RA2 — GPIO RA2 |
| Контакт 4 | RA3 — GPIO RA3 |
| Контакт 5 | RA4 — GPIO RA4 |
| Контакт 6 | RA5 — GPIO RA5 |
| Контакт 7 | RA6 — GPIO RA6 |
| Контакт 8 | RA7 — GPIO RA7 |
| Контакт 9 | RB0 — GPIO RB0 / PGED1 |
| Контакт 10 | RB1 — GPIO RB1 / PGEC1 |
| Контакт 11 | RB2 — GPIO RB2 |
| Контакт 12 | RB3 — GPIO RB3 |
| Контакт 13 | RB4 — GPIO RB4 |
| Контакт 14 | RB5 — GPIO RB5 |
| Контакт 15 | RB6 — GPIO RB6 |
| Контакт 16 | RB7 — GPIO RB7 |
| Контакт 17 | RB8 — GPIO RB8 |
| Контакт 18 | RB9 — GPIO RB9 |
| Контакт 19 | RB10 — GPIO RB10 |
| Контакт 20 | RB11 — GPIO RB11 |
| Контакт 21 | RB12 — GPIO RB12 |
| Контакт 22 | RB13 — GPIO RB13 |
| Контакт 23 | RB14 — GPIO RB14 |
| Контакт 24 | RB15 — GPIO RB15 |
| Контакт 25 | RC0 — GPIO RC0 |
| Контакт 26 | RC1 — GPIO RC1 |
| Контакт 27 | RC2 — GPIO RC2 |
| Контакт 28 | RC3 — GPIO RC3 |
| Контакт 29 | RC4 — GPIO RC4 |
| Контакт 30 | RC5 — GPIO RC5 |
| Контакт 31 | RC6 — GPIO RC6 |
| Контакт 32 | RC7 — GPIO RC7 |
| Контакт 33 | RC8 — GPIO RC8 |
| Контакт 34 | RC9 — GPIO RC9 |
| Контакт 35 | VDD — Positive supply voltage (2.3-3.6 V) |
| Контакт 36 | VSS — Ground reference |
| Контакт 37 | RD0 — GPIO RD0 |
| Контакт 38 | RD1 — GPIO RD1 |
| Контакт 39 | RD2 — GPIO RD2 |
| Контакт 40 | RD3 — GPIO RD3 |
| Контакт 41 | RD4 — GPIO RD4 |
| Контакт 42 | RD5 — GPIO RD5 |
| Контакт 43 | RD6 — GPIO RD6 |
| Контакт 44 | RD7 — GPIO RD7 |
| Контакт 45 | VDD — Positive supply voltage |
| Контакт 46 | VSS — Ground reference |
| Контакт 47 | RD8 — GPIO RD8 |
| Контакт 48 | RD9 — GPIO RD9 |
| Контакт 49 | RD10 — GPIO RD10 |
| Контакт 50 | RD11 — GPIO RD11 |
| Контакт 51 | RD12 — GPIO RD12 |
| Контакт 52 | RD13 — GPIO RD13 |
| Контакт 53 | RD14 — GPIO RD14 |
| Контакт 54 | RD15 — GPIO RD15 |
| Контакт 55 | RF0 — GPIO RF0 |
| Контакт 56 | RF1 — GPIO RF1 |
| Контакт 57 | RF2 — GPIO RF2 / USB D- |
| Контакт 58 | RF3 — GPIO RF3 / USB D+ |
| Контакт 59 | RF4 — GPIO RF4 |
| Контакт 60 | RF5 — GPIO RF5 |
| Контакт 61 | RF6 — GPIO RF6 |
| Контакт 62 | RF7 — GPIO RF7 |
| Контакт 63 | RF8 — GPIO RF8 |
| Контакт 64 | VSS — Ground reference |
Типичное применение
PIC32MX230F128HT-I/PT подходит для 6 применениеs: USB HID / CDC Peripheral Devices, Consumer Audio Products (Soundbars / Headphones / MP3), Home Appliance Control Panels with Capacitive Touch, Industrial Sensor Hubs and Data Loggers, Medical Monitoring Devices (Non-Critical), USB Smart Home Hubs and Chargers.
USB HID / CDC Peripheral Devices
The PIC32MX230F128HT-I/PT is well suited to USB Human Interface Devices (HID) and Communication Device Class (CDC) peripherals thanks to its integrated USB 2.0 Full-Speed controller with on-chip PHY, which eliminates external transceiver components. The 128 KB Flash accommodates the Microchip MLA USB stack plus HID/CDC class drivers, while the 16 KB SRAM supports HID report buffers and CDC line-coding state. At 40 MHz the M4K core delivers 50 DMIPS, sufficient for parsing USB descriptors and servicing HID reports at 1000 Hz polling rates. The 51 GPIO enables direct connection to key matrices, encoders, LEDs, and feature switches. Industrial temperature grade permits deployment in office and light-industrial peripherals. Layout guidance: route D+/D- as a 90 ohm differential pair on the top layer with continuous reference ground, place the 4.7 kohm pull-up on D+ within 5 mm of the pin, and add 15 pF ESD diodes to USB connector shield.
Рекомендуется
Consumer Audio Products (Soundbars / Headphones / MP3)
The PIC32MX230F128HT-I/PT targets cost-sensitive audio appliances through its three SPI/I2S modules that interface directly to DACs, ADCs, and digital audio amplifiers without glue logic. The CTMU peripheral enables capacitive-touch volume sliders and play/pause controls on speaker enclosures, while the 10-bit 1 Msps ADC handles battery monitoring and audio level detection. The 16 KB SRAM supports 8 kHz/16 kHz audio sample buffering for playback effects, and the 128 KB Flash holds audio decoders such as MP3 or SBC. The 64-pin TQFP package fits inside compact headphone and soundbar enclosures. At 3.3 V operation the part is directly compatible with portable Li-ion battery rails. Design note: place the I2S MCLK within the same clock domain as the DAC to avoid jitter-induced audio artifacts, and use the DMA controller to move audio samples between I2S and SRAM without CPU intervention.
Рекомендуется
Home Appliance Control Panels with Capacitive Touch
Capacitive touch user interfaces on washing machines, induction cooktops, ovens, and dishwashers are a primary application for the PIC32MX230F128HT-I/PT because of its integrated CTMU peripheral, which measures sub-picofarad capacitance changes for reliable button and slider detection through 5 mm glass. The RTCC maintains time-of-day and schedule data with backup battery domain, while the 10-bit ADC reads NTC thermistors for temperature control feedback. The 51 GPIO drives seven-segment displays, LED indicators, and triac control signals, and the 128 KB Flash supports IEC 60730 Class B safety library for white goods certification. The industrial -40C to +85C temperature range covers all kitchen and laundry environments. PCB guideline: route touch electrodes as guarded traces with the CTMU, place a ground ring around each button electrode, and use the on-chip RTCC with a 32.768 kHz crystal for accurate scheduling.
Рекомендуется
Industrial Sensor Hubs and Data Loggers
Industrial sensor hubs and data loggers benefit from the PIC32MX230F128HT-I/PT's combination of 28-channel 10-bit ADC, 16 DMA channels, and USB connectivity for high-throughput multi-sensor acquisition. The 128 KB Flash supports Modbus RTU, CAN, and proprietary protocols, while the 16 KB SRAM buffers sensor samples before USB upload or local storage. The 5 x 16-bit timers generate precise PWM outputs for valve/actuator control, and the parallel master port (PMP) interfaces to external SRAM for extended logging buffer. The 64-pin TQFP and industrial temperature rating fit inside IP65 enclosures. Typical implementations log 4-8 sensor channels at 1 kHz sampling rate and stream results over USB CDC virtual COM port. Design tip: use the DMA to move ADC conversion results directly to SRAM, freeing the CPU to manage USB frame timing and protocol parsing.
Рекомендуется
Medical Monitoring Devices (Non-Critical)
Non-critical medical monitoring devices such as pulse oximeters, blood pressure cuffs, and digital thermometers use the PIC32MX230F128HT-I/PT for its USB battery-charging-friendly 3.3 V operation, RTCC for time-stamped measurements, and ADC for analog sensor signal conditioning. The CTMU provides button and slider inputs on plastic enclosures, while the LCD parallel master port (PMP) drives alphanumeric segment displays. The 128 KB Flash accommodates reference design firmware with calibration routines, and the 16 KB SRAM stores measurement history. Note: this part is not FDA-approved for life-support or diagnostic applications; use only in fitness and wellness devices. For IEC 60601-1 compliance, add medical-grade isolation and redundant watchdog timers. PCB note: isolate analog AGND and digital DGND at a single point near the MCU, and add ferrite beads on analog supply lines.
Рекомендуется
USB Smart Home Hubs and Chargers
USB-charging smart-home hubs, smart power strips, and USB-controlled LED lighting controllers leverage the PIC32MX230F128HT-I/PT's USB device and OTG capability to receive commands from a host phone or hub, then drive relays, MOSFETs, and PWM LED outputs through the 51 GPIO. The I2C peripherals read temperature, current, and ambient-light sensors, while the RTCC schedules on/off events. The 128 KB Flash holds firmware for popular voice assistant integrations, and the industrial temperature range covers garage and outdoor cabinets with appropriate enclosure. Typical designs consume under 50 mA active at 40 MHz, making USB bus-powered operation practical. Design tip: use the USB VBUS sense pin to detect host connection and wake the MCU from sleep, then drive GPIO relay outputs only after USB enumeration confirms valid host.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC32MX230F128HT-I/PT — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC32MX230F128H-I/PT | PIC32MX230F128HT-50I/PT | PIC32MX130F128HT-I/PT | PIC32MX150F128HT-I/PT | PIC32MX170F256H-V/PT |
|---|---|---|---|---|---|---|
| Package | 64-TQFP (10x10) | 64-TQFP (10x10) - same | 64-TQFP (10x10) - same | 64-TQFP (10x10) - same | 64-TQFP (10x10) - same | 64-TQFP (10x10) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit |
| Max CPU Speed | 40 MHz | 40 MHz | 50 MHz | 40 MHz | 50 MHz | 50 MHz |
| Flash Memory | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB | 256 KB |
| SRAM | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB | 64 KB |
| USB | Yes (FS Device/Host/OTG) | Yes | Yes | Yes | Yes | Yes |
| Operating Temperature | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +105 C |
Ключевые отличия
- Integrated USB 2.0 Full-Speed PHY with on-chip transceiver (против PIC32MX170F256H-V/PT)
- Capacitive touch (CTMU) peripheral on-chip (против PIC32MX130F128HT-I/PT)
- Industrial temperature grade with USB and RTCC combination (против PIC32MX230F128H-I/PT)
Заметки по проектированию
Route the USB D+ (RF3) and D- (RF2) signals as a 90 ohm differential pair on the top layer with continuous ground reference plane beneath. Place the 4.7 kohm pull-up resistor on D+ within 5 mm of the RF3 pin, and add 15 pF ESD protection diodes (such as USBLC6-2SC6) within 3 mm of the USB connector. Keep the differential pair matched within 0.5 mm length and maintain 3x dielectric spacing to other signals to meet USB 2.0 Full-Speed signal integrity requirements.
Decouple each VDD pin (35 and 45) with a 100 nF X7R ceramic capacitor placed within 3 mm of the pin, plus a bulk 4.7 uF X5R capacitor on each VDD rail. Connect AGND (pin 36) and DGND (pin 46) at a single point near the MCU. Use a ferrite bead on the analog AVDD supply if driving the ADC, and keep the 3.3 V supply ripple below 50 mVpp to avoid ADC noise coupling. For USB bus-powered designs, add a 10 uF bulk capacitor on VBUS to handle inrush current.
Do not skip the 32.768 kHz crystal on SOSCO/SOSCI pins if RTCC functionality is required - the internal RC oscillator is not accurate enough for timekeeping. The PGED1/PGEC1 pins (RB0/RB1) are required for ICSP programming and debugging; do not repurpose them as outputs without considering the programming interface. Configure unused GPIO as digital inputs with internal pull-ups to minimize power consumption and avoid floating-pin oscillations. The CTMU peripheral requires calibration of the internal current source before touch measurements; refer to Microchip AN1250 for calibration procedures.
Place the 8 MHz primary crystal (POSC) within 5 mm of the OSC1/OSC2 pins with a ground guard ring around both crystal traces. For designs using USB, enable the Primary Oscillator with USB PLL mode (48 MHz required for USB clock). Route the JTAG signals TMS/TCK/TDO/TDI (shared with GPIO) with 50 ohm traces and avoid parallel routing near switching signals. The TQFP exposed thermal pad is not present on the 64-pin TQFP package - no thermal pad connection required, simplifying layout vs QFN variants.
Информация о соответствии
RoHS compliant per Microchip product page. Not AEC-Q100 qualified - the -V/PT variant may be required for automotive-grade applications. Lead-free and halogen-free per Microchip environmental certification.
