PIC32MZ2048EFM144-E/PL - 200MHz 32-bit MCU 2MB Flash | Microchip
Артикул: PIC32MZ2048EFM144-E/PL ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $18.45 | $18,45 |
| 10 | $17.1 | $171,00 |
| 100 | $15.2 | $1.520,00 |
| 500 | $13.85 | $6.925,00 |
| 1.000 | $12.4 | $12.400,00 |
PIC32MZ2048EFM144-E/PL Обзор
A 32-bit microcontroller (MCU) is a single-chip computer that integrates a high-performance CPU core, on-chip memory, and a rich set of peripherals such as ADC, PWM, USB, Ethernet, and CAN. The PIC32MZ EF family extends this concept with a MIPS Warrior M-class core that delivers up to 330 DMIPS at 200 MHz, four 64-bit accumulators for DSP operations, single-cycle MAC, saturating and fractional math, and hardware floating-point support. Positioned above 8/16-bit MCUs and below application processors, PIC32MZ EF parts are widely used where deterministic real-time response, large code footprint, and connectivity must coexist on one die.
Key features of the PIC32MZ2048EFM144-E/PL include 2 MB dual-panel Flash for live firmware updates without downtime, 512 KB SRAM, HS USB 2.0 with integrated PHY, 10/100 Ethernet MAC with hardware cryptography acceleration, multiple CAN modules, a 12-bit ADC up to 18 MSPS, and a graphics-friendly parallel interface for HMI panels. The device also provides multiple SPI, I²C, and UART channels, plus dedicated crypto engines for AES, DES, and SHA, enabling secure connected designs.
The 144-pin LQFP package offers a generous I/O count, making the part suitable for complex pin-intensive applications. The MIPS microAptiv core provides low interrupt latency and deterministic execution, while separate data/instruction paths improve throughput. Combined with a 1.6 mA/MHz typical run-mode current, this MCU is well suited for connected embedded systems that require both computational headroom and low standby draw.
Typical applications include industrial Ethernet gateways, automotive infotainment controllers, HMI panels with TFT displays, motor-control FOC drives, IoT edge nodes, and high-performance sensor hubs. The dual-panel Flash and Crypto engine also suit secure firmware-over-the-air (FOTA) updates in connected field equipment.
Designers should plan for adequate decoupling (100 nF plus 4.7 µF bulk), use all VDD/VSS pairs for low-impedance power delivery, and ensure traces to the integrated PHY follow 90 Ω differential impedance. Boot-time and FOTA flows should be validated against the dual-panel Flash behavior described in the Microchip PIC32MZ EF family datasheet.
This page synthesizes distributor pricing, drop-in Microchip same-package alternatives, and practical design notes that go beyond the manufacturer datasheet, helping engineers evaluate device components, family members, and replacements on a single screen.
Аналоги без доработки для PIC32MZ2048EFM144-E/PL — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC32MZ2048EFM144-E/PL (тот же форм-фактор и посадочное место) — отличается по Package, Crypto Engine, Ethernet, ADC, CAN.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC32MZ2048EFM144-I/PL
✅ Прямая замена✓ В наличии
$13.4 / шт.
Открыть даташит →PIC32MZ2048EFM144T-E/PL
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC32MZ2048EFM144-E/PH
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC32MZ1024EFM064-I/PT
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$8.88 / шт.
Открыть даташит →PIC32MZ2064DAS176-I/2J
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$22.61 / шт.
Открыть даташит →PIC32MZ2048EFH100-I/PF
✅ Прямая замена✓ В наличии
$11.88 / шт.
Открыть даташит →PIC32MZ2048EFM144-E/PL Максимальные параметры и электрические характеристики
| Core Architecture | MIPS32 M-Class (microAptiv) |
| Core Frequency | 200 MHz (330 DMIPS) |
| Program Flash | 2 MB (dual-panel, live-update) |
| SRAM | 512 KB |
| Operating Voltage | 2.3 V to 3.6 V |
| FPU | IEEE 754-compliant hardware FPU |
| Crypto Engine | AES, DES, 3DES, SHA-1/2, MD5 |
| USB | HS USB 2.0 with integrated PHY |
| Ethernet | 10/100 MAC (MII/RMII) |
| CAN | Multiple CAN modules |
| ADC | 12-bit, up to 18 MSPS |
| Корпус | 144-pin LQFP (20x20 mm) |
| Temperature Range | -40 C to +125 C (E = Enhanced) |
| AEC-Q100 | Qualified (automotive) |
Конфигурация выводов PIC32MZ2048EFM144-E/PL
| Контакт 1 | RG15 — General purpose I/O port RG bit 15 |
| Контакт 2 | RG0 — General purpose I/O port RG bit 0 |
| Контакт 3 | RG1 — General purpose I/O port RG bit 1 |
| Контакт 4 | RG2 — General purpose I/O port RG bit 2 |
| Контакт 5 | RG3 — General purpose I/O port RG bit 3 |
| Контакт 6 | VDD — Power supply (3.3 V typical) |
| Контакт 7 | VSS — Ground reference |
| Контакт 8 | RG4 — General purpose I/O port RG bit 4 |
| Контакт 9 | RG5 — General purpose I/O port RG bit 5 |
| Контакт 10 | RG6 — General purpose I/O port RG bit 6 |
| Контакт 11 | RG7 — General purpose I/O port RG bit 7 |
| Контакт 12 | RG8 — General purpose I/O port RG bit 8 |
| Контакт 13 | RG9 — General purpose I/O port RG bit 9 |
| Контакт 14 | VDD — Power supply (3.3 V typical) |
| Контакт 15 | VSS — Ground reference |
| Контакт 16 | RB5 — General purpose I/O port RB bit 5 |
| Контакт 17 | RB4 — General purpose I/O port RB bit 4 |
| Контакт 18 | RB3 — General purpose I/O port RB bit 3 |
| Контакт 19 | RB2 — General purpose I/O port RB bit 2 |
| Контакт 20 | RB1 — General purpose I/O port RB bit 1 |
| Контакт 21 | RB0 — General purpose I/O port RB bit 0 |
| Контакт 22 | RB6 — General purpose I/O port RB bit 6 |
| Контакт 23 | RB7 — General purpose I/O port RB bit 7 |
| Контакт 24 | RB8 — General purpose I/O port RB bit 8 |
| Контакт 25 | RB9 — General purpose I/O port RB bit 9 |
| Контакт 26 | RB10 — General purpose I/O port RB bit 10 |
| Контакт 27 | RB11 — General purpose I/O port RB bit 11 |
| Контакт 28 | RB12 — General purpose I/O port RB bit 12 |
| Контакт 29 | RB13 — General purpose I/O port RB bit 13 |
| Контакт 30 | RB14 — General purpose I/O port RB bit 14 |
| Контакт 31 | RB15 — General purpose I/O port RB bit 15 |
| Контакт 32 | VDD — Power supply (3.3 V typical) |
| Контакт 33 | VSS — Ground reference |
| Контакт 34 | RD0 — General purpose I/O port RD bit 0 |
| Контакт 35 | RD1 — General purpose I/O port RD bit 1 |
| Контакт 36 | RD2 — General purpose I/O port RD bit 2 |
| Контакт 37 | RD3 — General purpose I/O port RD bit 3 |
| Контакт 38 | RD4 — General purpose I/O port RD bit 4 |
| Контакт 39 | RD5 — General purpose I/O port RD bit 5 |
| Контакт 40 | RD6 — General purpose I/O port RD bit 6 |
| Контакт 41 | RD7 — General purpose I/O port RD bit 7 |
| Контакт 42 | RD8 — General purpose I/O port RD bit 8 |
| Контакт 43 | RD9 — General purpose I/O port RD bit 9 |
| Контакт 44 | RD10 — General purpose I/O port RD bit 10 |
| Контакт 45 | RD11 — General purpose I/O port RD bit 11 |
| Контакт 46 | RD12 — General purpose I/O port RD bit 12 |
| Контакт 47 | RD13 — General purpose I/O port RD bit 13 |
| Контакт 48 | RD14 — General purpose I/O port RD bit 14 |
| Контакт 49 | RD15 — General purpose I/O port RD bit 15 |
| Контакт 50 | VDD — Power supply (3.3 V typical) |
| Контакт 51 | VSS — Ground reference |
| Контакт 52 | RC0 — General purpose I/O port RC bit 0 |
| Контакт 53 | RC1 — General purpose I/O port RC bit 1 |
| Контакт 54 | RC2 — General purpose I/O port RC bit 2 |
| Контакт 55 | RC3 — General purpose I/O port RC bit 3 |
| Контакт 56 | RC4 — General purpose I/O port RC bit 4 |
| Контакт 57 | RC5 — General purpose I/O port RC bit 5 |
| Контакт 58 | RC6 — General purpose I/O port RC bit 6 |
| Контакт 59 | RC7 — General purpose I/O port RC bit 7 |
| Контакт 60 | RC8 — General purpose I/O port RC bit 8 |
| Контакт 61 | RC9 — General purpose I/O port RC bit 9 |
| Контакт 62 | RC10 — General purpose I/O port RC bit 10 |
| Контакт 63 | RC11 — General purpose I/O port RC bit 11 |
| Контакт 64 | RC12 — General purpose I/O port RC bit 12 |
| Контакт 65 | RC13 — General purpose I/O port RC bit 13 |
| Контакт 66 | RC14 — General purpose I/O port RC bit 14 |
| Контакт 67 | RC15 — General purpose I/O port RC bit 15 |
| Контакт 68 | VDD — Power supply (3.3 V typical) |
| Контакт 69 | VSS — Ground reference |
| Контакт 70 | RA0 — General purpose I/O port RA bit 0 |
| Контакт 71 | RA1 — General purpose I/O port RA bit 1 |
| Контакт 72 | RA2 — General purpose I/O port RA bit 2 |
| Контакт 73 | RA3 — General purpose I/O port RA bit 3 |
| Контакт 74 | RA4 — General purpose I/O port RA bit 4 |
| Контакт 75 | RA5 — General purpose I/O port RA bit 5 |
| Контакт 76 | RA6 — General purpose I/O port RA bit 6 |
| Контакт 77 | RA7 — General purpose I/O port RA bit 7 |
| Контакт 78 | RA8 — General purpose I/O port RA bit 8 |
| Контакт 79 | RA9 — General purpose I/O port RA bit 9 |
| Контакт 80 | RA10 — General purpose I/O port RA bit 10 |
| Контакт 81 | RA11 — General purpose I/O port RA bit 11 |
| Контакт 82 | RA12 — General purpose I/O port RA bit 12 |
| Контакт 83 | RA13 — General purpose I/O port RA bit 13 |
| Контакт 84 | RA14 — General purpose I/O port RA bit 14 |
| Контакт 85 | RA15 — General purpose I/O port RA bit 15 |
| Контакт 86 | VDD — Power supply (3.3 V typical) |
| Контакт 87 | VSS — Ground reference |
| Контакт 88 | RF0 — General purpose I/O port RF bit 0 |
| Контакт 89 | RF1 — General purpose I/O port RF bit 1 |
| Контакт 90 | RF2 — General purpose I/O port RF bit 2 |
| Контакт 91 | RF3 — General purpose I/O port RF bit 3 |
| Контакт 92 | RF4 — General purpose I/O port RF bit 4 |
| Контакт 93 | RF5 — General purpose I/O port RF bit 5 |
| Контакт 94 | RF6 — General purpose I/O port RF bit 6 |
| Контакт 95 | RF7 — General purpose I/O port RF bit 7 |
| Контакт 96 | RF8 — General purpose I/O port RF bit 8 |
| Контакт 97 | RF9 — General purpose I/O port RF bit 9 |
| Контакт 98 | RF10 — General purpose I/O port RF bit 10 |
| Контакт 99 | RF11 — General purpose I/O port RF bit 11 |
| Контакт 100 | RF12 — General purpose I/O port RF bit 12 |
| Контакт 101 | RF13 — General purpose I/O port RF bit 13 |
| Контакт 102 | RF14 — General purpose I/O port RF bit 14 |
| Контакт 103 | RF15 — General purpose I/O port RF bit 15 |
| Контакт 104 | VDD — Power supply (3.3 V typical) |
| Контакт 105 | VSS — Ground reference |
| Контакт 106 | RE0 — General purpose I/O port RE bit 0 |
| Контакт 107 | RE1 — General purpose I/O port RE bit 1 |
| Контакт 108 | RE2 — General purpose I/O port RE bit 2 |
| Контакт 109 | RE3 — General purpose I/O port RE bit 3 |
| Контакт 110 | RE4 — General purpose I/O port RE bit 4 |
| Контакт 111 | RE5 — General purpose I/O port RE bit 5 |
| Контакт 112 | RE6 — General purpose I/O port RE bit 6 |
| Контакт 113 | RE7 — General purpose I/O port RE bit 7 |
| Контакт 114 | RE8 — General purpose I/O port RE bit 8 |
| Контакт 115 | RE9 — General purpose I/O port RE bit 9 |
| Контакт 116 | RE10 — General purpose I/O port RE bit 10 |
| Контакт 117 | RE11 — General purpose I/O port RE bit 11 |
| Контакт 118 | RE12 — General purpose I/O port RE bit 12 |
| Контакт 119 | RE13 — General purpose I/O port RE bit 13 |
| Контакт 120 | RE14 — General purpose I/O port RE bit 14 |
| Контакт 121 | RE15 — General purpose I/O port RE bit 15 |
| Контакт 122 | VDD — Power supply (3.3 V typical) |
| Контакт 123 | VSS — Ground reference |
| Контакт 124 | RH0 — General purpose I/O port RH bit 0 |
| Контакт 125 | RH1 — General purpose I/O port RH bit 1 |
| Контакт 126 | RH2 — General purpose I/O port RH bit 2 |
| Контакт 127 | RH3 — General purpose I/O port RH bit 3 |
| Контакт 128 | RH4 — General purpose I/O port RH bit 4 |
| Контакт 129 | RH5 — General purpose I/O port RH bit 5 |
| Контакт 130 | RH6 — General purpose I/O port RH bit 6 |
| Контакт 131 | RH7 — General purpose I/O port RH bit 7 |
| Контакт 132 | RH8 — General purpose I/O port RH bit 8 |
| Контакт 133 | RH9 — General purpose I/O port RH bit 9 |
| Контакт 134 | RH10 — General purpose I/O port RH bit 10 |
| Контакт 135 | RH11 — General purpose I/O port RH bit 11 |
| Контакт 136 | RH12 — General purpose I/O port RH bit 12 |
| Контакт 137 | RH13 — General purpose I/O port RH bit 13 |
| Контакт 138 | RH14 — General purpose I/O port RH bit 14 |
| Контакт 139 | RH15 — General purpose I/O port RH bit 15 |
| Контакт 140 | VDD — Power supply (3.3 V typical) |
| Контакт 141 | VSS — Ground reference |
| Контакт 142 | RJ0 — General purpose I/O port RJ bit 0 |
| Контакт 143 | RJ1 — General purpose I/O port RJ bit 1 |
| Контакт 144 | RJ2 — General purpose I/O port RJ bit 2 |
Типичное применение
PIC32MZ2048EFM144-E/PL подходит для 6 применениеs: Industrial Ethernet Gateway, Automotive Infotainment Controller, HMI / Graphics Panel, Motor-Control FOC Drive, IoT Edge Node / Sensor Hub, Secure Industrial Controller (FOTA).
Industrial Ethernet Gateway
The PIC32MZ2048EFM144-E/PL's integrated 10/100 Ethernet MAC, 2 MB dual-panel Flash, and 512 KB SRAM make it a strong fit for industrial Ethernet gateways that bridge Modbus TCP, EtherNet/IP, or PROFINET fieldbuses to cloud backhaul. The 200 MHz MIPS core runs lwIP, FreeRTOS, or Harmony TCP/IP stacks with TLS offload via the Crypto engine. The dual-panel Flash enables secure FOTA updates while the gateway stays online, critical for Industry 4.0 retrofits. AEC-Q100 qualification and -40 C to +125 C operation also suit cabinets adjacent to motors and drives.
Рекомендуется
Automotive Infotainment Controller
With AEC-Q100 qualification, hardware FPU, and a parallel graphics master port (PMP), the PIC32MZ2048EFM144-E/PL drives TFT HMI panels in automotive infotainment systems. The Crypto engine accelerates secure boot and content decryption, while dual-panel Flash supports non-disruptive map and firmware updates over the air. The 200 MHz / 330 DMIPS throughput renders vector graphics and H.264 frame buffer overlays without an external GPU. Up to 120 GPIO and multiple CAN-FD channels simplify body-controller integration.
Рекомендуется
HMI / Graphics Panel
The PIC32MZ2048EFM144-E/PL's PMP (Parallel Master Port), 2 MB Flash, and 200 MHz throughput enable direct driving of small-to-medium TFT panels up to WXGA for industrial HMI. The hardware FPU accelerates vector drawing and anti-aliased font rendering, while the Crypto engine secures OTA UI updates. A 12-bit ADC at 18 MSPS supports touch-screen sensing and analog front-end channels in the same design. The 144-LQFP footprint exposes enough GPIO for capacitive touch controllers and backlight PWM.
Рекомендуется
Motor-Control FOC Drive
The PIC32MZ2048EFM144-E/PL integrates DSP-extended instructions (four 64-bit accumulators, single-cycle MAC) that pair with the dsPIC-style peripherals in the PIC32 ecosystem to execute field-oriented control (FOC) loops at <1 µs step times for PMSM and BLDC motors. The 200 MHz core supports up to 8 kHz current loop rates with margin for sensorless observers. The hardware FPU simplifies parameter tuning maths, while the 12-bit 18 MSPS ADC samples phase currents synchronously to PWM edges. CAN-FD support enables integration into industrial drive networks.
Рекомендуется
IoT Edge Node / Sensor Hub
The PIC32MZ2048EFM144-E/PL's Crypto engine, low 1.6 mA/MHz run current, and rich connectivity (HS USB, Ethernet, CAN, SPI, I²C, UART) suit secure IoT edge nodes that aggregate sensor data from multiple buses. The 2 MB dual-panel Flash fits TLS libraries, JSON parsers, and over-the-air update payloads without external memory. The -40 C to +125 C range supports outdoor and industrial enclosures. Hardware AES/SHA accelerates mutual-auth TLS handshakes at the edge, offloading cloud gateways.
Рекомендуется
Secure Industrial Controller (FOTA)
The PIC32MZ2048EFM144-E/PL's dual-panel Flash plus Crypto engine enable firmware-over-the-air (FOTA) updates with secure boot verification, ideal for remote industrial controllers such as PLCs, smart meters, and asset trackers. The 200 MHz MIPS core runs vendor firmware plus TLS 1.3 with hardware SHA-256 acceleration. Multiple UART/SPI/I²C channels interface to industrial sensors and Modbus slaves, while Ethernet connects to factory MES systems. The enhanced -40 C to +125 C temperature range supports outdoor cabinets and machine-side mounting.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC32MZ2048EFM144-E/PL — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC32MZ2048EFM144-I/PL | PIC32MZ2048EFM144T-E/PL | PIC32MZ2048EFH100-I/PF |
|---|---|---|---|---|
| Package | 144-LQFP (20x20 mm) | 144-LQFP (20x20 mm) - same | 144-LQFP (20x20 mm) - same | 100-TQFP - different |
| Brand | Microchip Technology | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same |
| Core Frequency | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Flash | 2 MB | 2 MB | 2 MB | 2 MB |
| SRAM | 512 KB | 512 KB | 512 KB | 512 KB |
| Temperature Range | -40 C to +125 C (Enhanced) | -40 C to +85 C (Industrial) | -40 C to +125 C (Enhanced) | -40 C to +85 C (Industrial) |
| FPU | Yes (IEEE 754) | Yes (IEEE 754) | Yes (IEEE 754) | Yes (IEEE 754) |
| Crypto Engine | AES/DES/SHA/MD5 | AES/DES/SHA/MD5 | AES/DES/SHA/MD5 | AES/DES/SHA/MD5 |
Ключевые отличия
- Enhanced -40 C to +125 C temperature range for underhood and outdoor enclosures (против PIC32MZ2048EFM144-I/PL)
- Same die as the E variant with tape-and-reel packaging for high-volume assembly (против PIC32MZ2048EFM144T-E/PL)
- Dual-panel Flash enables secure FOTA without downtime, unlike PIC32MX legacy (против PIC32MX675F512L-80I/PT)
Заметки по проектированию
Place a 100 nF ceramic decoupling capacitor as close as possible to every VDD/VSS pair (12 pairs on 144-LQFP). Add one 4.7 µF bulk capacitor per VDD domain. According to Microchip PIC32MZ EF datasheet, the on-chip voltage regulator requires a 10 µF capacitor on the VCAP pin for stable core 1.2 V generation. Inadequate decoupling can cause intermittent Ethernet PHY link drops at 100 Mbps and ADC sampling jitter.
The integrated 10/100 Ethernet PHY interfaces to an external MII/RMII transceiver such as LAN8742A via four 50 Ω controlled-impedance traces plus two 90 Ω differential pairs. Use a continuous reference ground plane beneath these signals. Route USB D+/D- as 90 Ω differential. Mount the 12 MHz crystal within 5 mm of the OSC1/OSC2 pins and guard it with a ground ring.
Do not skip configuring the peripheral pin-select (PPS) registers - PIC32MZ EF uses PPS to map peripherals to physical pins, unlike older PIC32MX parts. Failure to configure PPS will leave peripherals silent on reset. Also ensure the FPU is enabled in the initial startup code (set CP0.Cause.FPU bit) before any float operation, or hard faults will occur.
At 200 MHz with FPU active and both Flash panels busy, the die dissipates approximately 320 mW. The 144-LQFP package has a θJA of roughly 35 C/W, giving a 11 C temperature rise in still air. For automotive -40 C to +125 C operation, keep junction below +150 C. Provide a continuous ground pour beneath the chip and tie thermal vias to inner ground planes.
Информация о соответствии
AEC-Q100 qualified per Microchip product page. The E temperature suffix (-40 C to +125 C) supports automotive cabin and underhood environments. RoHS and REACH compliant per Microchip compliance database.
