Renesas Electronics

R5F10FMEDFB#V0 - 32MHz 64KB RL78/G1E MCU | Renesas

Артикул: R5F10FMEDFB#V0 ✗ Снят с производства
1.6 V to 5.5 V Vdss 80-LFQFP (12 x 12 mm) Package 32 MHz Speed 64 KB Memory
MOQ: 1 |

R5F10FMEDFB#V0 Обзор

Renesas Electronics R5F10FMEDFB#V0 is a 32 MHz, 16-bit RL78/G1E microcontroller with 64 KB of flash memory in an 80-pin LFQFP package measuring 12 mm by 12 mm. The device is designed for embedded control applications that require a compact microcontroller, low operating voltage, and integrated flash program memory.

A microcontroller is a programmable semiconductor device that combines a processor core, memory, peripherals, and input/output interfaces on one integrated circuit. The RL78 family is Renesas's low-power embedded MCU family, while the G1E group targets general-purpose industrial, consumer, and equipment-control designs. The R5F10FMEDFB#V0 provides 64 KB of flash for firmware and 8-bit and 12-bit conversion capabilities identified in the product listing.

The primary specifications include a 32 MHz operating frequency, 16-bit CPU architecture, 64 KB flash memory, a 1.6 V to 5.5 V operating-voltage range, and an 80-LFQFP 12 mm by 12 mm package. These attributes make the part suitable for applications where a moderate amount of on-chip program storage, compact board area, and low-voltage operation are important.

The RL78/G1E architecture is positioned for embedded systems that need straightforward control functions rather than high-performance application processing. Its flash-based program memory supports firmware storage without requiring an external memory device in many designs. The package provides a larger pin count than small-outline packages, allowing more peripheral and signal options to be exposed when the board design requires extensive I/O.

Typical uses include industrial equipment controllers, sensor-interface boards, compact consumer products, building and access equipment, and low-voltage embedded control modules. Designers should confirm peripheral availability, pin multiplexing, memory requirements, operating-temperature limits, and electrical characteristics against the manufacturer datasheet before releasing a PCB design.

For a new layout, place the decoupling capacitors close to the appropriate power pins, route the oscillator and reset-related nets away from noisy switching nodes, and preserve the package-specific land pattern. Because this is an 80-pin LFQFP device, the exact footprint must be checked against the package drawing rather than inferred from a generic LQFP footprint.

This page combines the available product specifications, package information, sourcing context, comparison fields, and practical integration guidance for engineers evaluating the R5F10FMEDFB#V0 in an RL78/G1E design.

Аналоги без доработки для R5F10FMEDFB#V0 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с R5F10FMEDFB#V0 (тот же форм-фактор и посадочное место) — отличается по Manufacturer, Product Type.

Renesas Electronics
Manufacturer: Renesas Electronics Corporation
Product Type: RL78/G1E 16-bit microcontroller
Сравнить с R5F10FMEDFB#V0 →

R5F10FMEDFB#YK1

✅ Прямая замена
📦 80-LFQFP (12 x 12 mm)
Same stated 32 MHz, 64 KB flash, and 80-LFQFP configuration; ordering suffix differs by 100% of the suffix value

📋 Справочный аналог (нет в каталоге)

R5F10FMEDFB

✅ Прямая замена ⚠️ Характеристики не проверены
📦 80-LFQFP (12 x 12 mm)
Same base device and package; exact production suffix and grade must be confirmed, with no verified headline difference

📋 Справочный аналог (нет в каталоге)

R5F10FMEDFB#U0

✅ Прямая замена ⚠️ Характеристики не проверены
📦 80-LFQFP (12 x 12 mm)
Same base device and package; production suffix may change grade or ordering code by 100% of the suffix

📋 Справочный аналог (нет в каталоге)

R5F10FMEDFB#X0

✅ Прямая замена ⚠️ Характеристики не проверены
Renesas Electronics
📦 80-LFQFP (12 x 12 mm)
RL78/G1E 16-bit microcontroller · 32 MHz · 16-bit · 64 KB · 64K x 8 bits · 80-pin LFQFP · 12 mm x 12 mm · Surface mount

Уточнить цену

Открыть даташит →

R5F10FMEDFB#YK0

✅ Прямая замена ⚠️ Характеристики не проверены
📦 80-LFQFP (12 x 12 mm)
Same base device and package; production suffix may change qualification or ordering information by 100% of the suffix

📋 Справочный аналог (нет в каталоге)

R5F10FMEDFB#V0 Максимальные параметры и электрические характеристики

Product Type 16-bit microcontroller
Series RL78/G1E
Maximum Operating Frequency 32 MHz
Flash Memory 64 KB
Flash Organization 64K x 8 bits
CPU Architecture 16-bit
Operating Voltage Range 1.6 V to 5.5 V
ADC Resolution 8-bit and 12-bit
Корпус 80-LFQFP (12 x 12 mm)
Package Pin Count 80 pins
Тип монтажа Surface mount
Manufacturer Renesas Electronics
Статус RoHS RoHS

Руководство по цоколевке R5F10FMEDFB#V0 в корпусе 80 pins

Цоколевка для R5F10FMEDFB#V0 (корпус 80 pins). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса 80 pins для R5F10FMEDFB#V0

Нет подробных данных о распиновке для R5F10FMEDFB#V0.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

R5F10FMEDFB#V0 подходит для 6 применениеs: Industrial Equipment Control, Sensor Interface Module, Low-Voltage Access Equipment, Compact Consumer Controller, Building and Automation Node, Battery-Powered Monitoring Device.

🏭

Industrial Equipment Control

The R5F10FMEDFB#V0 fits compact industrial equipment controllers that require deterministic embedded control, a 32 MHz operating frequency, and 64 KB of on-chip flash. Its 80-LFQFP 12 mm by 12 mm package exposes a broad set of I/O options for sensors, indicators, actuators, and communication interfaces. The 1.6 V to 5.5 V operating range supports low-voltage embedded rails. For production use, verify the exact peripheral mix, temperature grade, timing limits, and EMC layout guidance in the Renesas datasheet before schematic release.

🧩

Sensor Interface Module

The R5F10FMEDFB#V0 is appropriate for a multi-channel sensor interface module where a 16-bit RL78/G1E core can process measurements and manage local control functions. Its listed 8-bit and 12-bit conversion capability supports mixed-resolution acquisition requirements, while 64 KB of flash provides room for application firmware and calibration logic. The large 80-pin LFQFP package can simplify access to digital and analog-capable signals. Select external precision components and protection networks separately, and verify the exact converter channels and pin multiplexing in the manufacturer documentation.

🔒

Low-Voltage Access Equipment

The R5F10FMEDFB#V0 can serve as the central controller in low-voltage access equipment, where firmware must coordinate input readers, lock or relay outputs, indicators, communications, and diagnostic behavior. The 32 MHz RL78/G1E processing rate supports responsive control tasks, and 64 KB flash accommodates a substantial embedded application. Its 1.6 V to 5.5 V range permits integration with low-energy power designs. Before deployment, review voltage thresholds, timing margins, peripheral availability, environmental qualification, and cybersecurity requirements with the device documentation.

📱

Compact Consumer Controller

The R5F10FMEDFB#V0 is suitable for a compact consumer-control board that manages buttons, indicators, sensors, and a small state machine without a separate external flash device. The 64 KB embedded program memory and 32 MHz clock provide a practical balance of capability and integration, while the 80-LFQFP package offers generous I/O access. The 1.6 V to 5.5 V operating range supports low-voltage system rails. Final selection should account for standby behavior, available timers and communication interfaces, pin multiplexing, and the exact package drawing.

🏠

Building and Automation Node

The R5F10FMEDFB#V0 can implement a local building-automation node that reads environmental or occupancy inputs and controls outputs through a wired interface. Its 32 MHz 16-bit core and 64 KB flash are appropriate for protocol handling, debouncing, state management, and diagnostics, while the 80-pin package simplifies access to multiple I/O signals. The 1.6 V to 5.5 V operating range can simplify low-voltage rail design. Confirm peripheral availability, timing requirements, temperature range, and communication interfaces in the Renesas documentation before installation.

🔋

Battery-Powered Monitoring Device

The R5F10FMEDFB#V0 can support a battery-powered monitoring device when its operating mode, analog functions, and power-consumption characteristics satisfy the design budget. The low-voltage 1.6 V to 5.5 V range aligns with many energy-harvesting and portable sensor architectures, and 64 KB flash permits integrated firmware without an external program-memory device. The 80-LFQFP package provides access to sensor and status-control signals. Verify standby and active current, regulator efficiency, ADC performance, and wake-up behavior before committing to a battery-life target.

What is the R5F10FMEDFB#V0?
The R5F10FMEDFB#V0 is a Renesas Electronics 16-bit RL78/G1E microcontroller operating at up to 32 MHz. It includes 64 KB of flash memory, identified in the manufacturer listing as 64K x 8 bits, and is packaged in an 80-LFQFP package measuring 12 mm by 12 mm. According to the Renesas product information, the device belongs to the RL78/G1E general-purpose microcontroller family.
What is the operating voltage of R5F10FMEDFB#V0?
The R5F10FMEDFB#V0 operates from 1.6 V to 5.5 V. According to the product specification shown by JLCPCB, this voltage range supports low-voltage embedded systems. The manufacturer datasheet should be used to confirm supply tolerances, internal operating modes, and any restrictions associated with specific peripherals before the device is placed in a production design.
How much flash memory does R5F10FMEDFB#V0 have?
The R5F10FMEDFB#V0 provides 64 KB of flash memory, arranged as 64K x 8 bits. The DigiKey and Renesas product descriptions identify this 64 KB flash configuration directly. This on-chip program memory is suitable for compact embedded firmware, and the datasheet should be consulted for code-protection, programming, erase, and write-cycle details.
What package does R5F10FMEDFB#V0 use?
The R5F10FMEDFB#V0 uses an 80-pin LFQFP package with a 12 mm by 12 mm body size. The package identification appears in the Renesas and distributor product listings. Because an 80-pin LFQFP is not interchangeable with every smaller LQFP footprint, use the package drawing in the manufacturer datasheet when creating the PCB land pattern and stencil.
What is the CPU frequency of R5F10FMEDFB#V0?
The R5F10FMEDFB#V0 runs at up to 32 MHz. This figure is listed in the Renesas product description and appears consistently across the distributor results. The operating frequency is the principal processing-performance indication for this microcontroller, while actual application throughput also depends on peripherals, memory configuration, bus activity, and code execution characteristics.
Where can I download the R5F10FMEDFB#V0 datasheet?
The R5F10FMEDFB#V0 datasheet is available through the datasheet link listed in the R5F10FMEDFB#V0 EEWorld results page and through the Renesas product documentation route. Use the manufacturer document for final pin assignments, electrical limits, timing, peripheral details, programming instructions, and package drawings because third-party listings may summarize only headline specifications.
Where can I find the R5F10FMEDFB#V0 pinout?
The R5F10FMEDFB#V0 pinout is identified in the manufacturer datasheet under the 80-LFQFP package information. Use that package-specific pin table when assigning power, ground, reset, oscillator, programming, and I/O signals. Do not rely on a generic 80-pin LQFP drawing without checking the Renesas pin-number diagram, exposed-pad treatment, and board-layout notes.
What is the best drop-in replacement for R5F10FMEDFB#V0?
The best drop-in replacement must use the same 80-LFQFP 12 mm by 12 mm footprint and provide pin-compatible RL78/G1E functions and compatible electrical characteristics. No independently verified cross-reference entries establish a qualified drop-in replacement for this exact MPN in the available search results. Request a manufacturer cross-reference or verify any candidate against the Renesas package and pin tables before using it as a replacement.
Can R5F10FMEDFB#YK1 replace R5F10FMEDFB#V0?
R5F10FMEDFB#YK1 is a related Renesas listing with the same stated 32 MHz RL78/G1E device, 64 KB flash configuration, and 80-LFQFP 12 mm by 12 mm package. However, the different ordering suffix may encode production, temperature, qualification, or packaging information. Confirm those attributes in the Renesas datasheet and purchasing records before treating it as a drop-in replacement.
Is R5F10FMEDFB#V0 suitable for industrial equipment control?
The R5F10FMEDFB#V0 is suitable for many low-voltage embedded-control applications because it combines a 32 MHz 16-bit RL78/G1E core with 64 KB flash and an 80-LFQFP package with numerous external connections. For industrial deployment, verify the temperature grade, EMC-related design guidance, peripheral set, availability, and any qualification requirements named in the manufacturer documentation.
How do I choose between R5F10FMEDFB#V0 and another RL78/G1E device?
Choose R5F10FMEDFB#V0 when the design specifically needs 64 KB flash, operation up to 32 MHz, a 1.6 V to 5.5 V supply range, and the exact 80-LFQFP 12 mm by 12 mm footprint. Compare alternatives by exact pin compatibility, memory, peripherals, operating-temperature grade, qualification, and supply status. A related family member is not automatically a drop-in replacement.
What is the price of R5F10FMEDFB#V0?
Current unit pricing and quantity-break prices for the exact R5F10FMEDFB#V0 should be requested through the Request a Quote form on this page. The available listings show marketplace or distributor inventory context but do not provide a consistent quantity-break table for this exact MPN in a single extractable record. The platform can therefore provide the most relevant quote without inserting a potentially stale price.
Is R5F10FMEDFB#V0 in stock?
Stock status for R5F10FMEDFB#V0 should be confirmed through the Request a Quote form on this page. The available product pages include inventory language, but those statements are dynamic and may represent different warehouses, quantities, or fulfillment dates. The quote request provides a current availability check for the exact ordering code.
What is the lead time for R5F10FMEDFB#V0?
The current lead time for R5F10FMEDFB#V0 should be confirmed through the Request a Quote form on this page. A listing that shows an estimated delivery window does not establish a manufacturer lead time and may vary with quantity, inventory location, packaging, and fulfillment method. Use the quote response for the committed schedule applicable to your order.
What are the key specifications of R5F10FMEDFB#V0 that engineers should know?
The key specifications are a 32 MHz maximum frequency, 16-bit RL78/G1E architecture, 64 KB flash organized as 64K x 8 bits, a 1.6 V to 5.5 V operating range, 8-bit and 12-bit conversion capability, and an 80-LFQFP 12 mm by 12 mm package. These facts support compact embedded-control designs, while RAM, EEPROM, temperature limits, peripheral details, and current consumption remain datasheet-selection items.
What can replace R5F10FMEDFB#V0?
R5F10FMEDFB#V0 can only be replaced without PCB changes by a device with the same 80-LFQFP 12 mm by 12 mm footprint, compatible pin functions, and suitable memory, voltage, timing, peripheral, and temperature characteristics. The available cross-reference results do not identify a verified alternative, so engineers should use the manufacturer cross-reference service or compare a candidate against the Renesas datasheet before substitution.

Справочные инженерные данные для R5F10FMEDFB#V0 — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose R5F10FMEDFB#V0 when the design specifically requires the listed RL78/G1E configuration of 64 KB flash, operation up to 32 MHz, a 1.6 V to 5.5 V supply range, and an 80-LFQFP 12 mm by 12 mm footprint. Consider R5F10FMEDFB#YK1 when its suffix-specific production and qualification attributes fit the product, but verify those details rather than assuming equivalence. The other listed R5F10FMEDFB variants use the same family and package naming pattern, so they are useful same-brand sourcing candidates when their temperature grade, qualification, and ordering codes are confirmed. No cross-brand drop-in alternative was established because the cross-reference results did not identify a candidate with a verified compatible pinout and electrical specification. If the 80-pin footprint, 64 KB memory, or voltage range is not fixed, evaluate other RL78 devices that better match peripheral needs rather than forcing a package-based substitution.

Сравнение с аналогами

Параметр Этот товар R5F10FMEDFB#YK1 R5F10FMEDFB R5F10FMEDFB#U0 R5F10FMEDFB#X0 R5F10FMEDFB#YK0
Package 80-LFQFP (12 x 12 mm) 80-LFQFP (12 x 12 mm) 80-LFQFP (12 x 12 mm) 80-LFQFP (12 x 12 mm) 80-LFQFP (12 x 12 mm) 80-LFQFP (12 x 12 mm)
Brand Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics
Maximum Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz
CPU Architecture 16-bit 16-bit 16-bit 16-bit 16-bit 16-bit
Flash Memory 64 KB 64 KB 64 KB 64 KB 64 KB 64 KB
Operating Voltage 1.6 V to 5.5 V 1.6 V to 5.5 V 1.6 V to 5.5 V 1.6 V to 5.5 V 1.6 V to 5.5 V 1.6 V to 5.5 V
ADC Resolution 8-bit and 12-bit 8-bit and 12-bit 8-bit and 12-bit 8-bit and 12-bit 8-bit and 12-bit 8-bit and 12-bit
Series RL78/G1E RL78/G1E RL78/G1E RL78/G1E RL78/G1E RL78/G1E

Ключевые отличия

  • Combines 32 MHz processing with 64 KB flash in a general-purpose RL78/G1E device (против R5F10FMEDFB#YK1)
  • Uses a broad 80-LFQFP footprint for external I/O access (против R5F10FMEDFB)
  • Supports low-voltage embedded operation (против R5F10FMEDFB#X0)

Заметки по проектированию

Use the exact Renesas 80-LFQFP 12 mm by 12 mm land pattern rather than a generic 80-pin LQFP footprint. Confirm pin-1 orientation, exposed-pad treatment if applicable, solder-mask clearance, and recommended stencil dimensions from the package drawing. Place local decoupling capacitors adjacent to the associated supply pins and keep the ground return path short to reduce supply impedance during switching transitions.

Route oscillator, reset, programming, and sensitive analog inputs away from high-current switching nodes and connectors likely to inject transient noise. Keep sensor traces short where possible, provide a continuous ground reference beneath analog circuitry, and separate noisy return currents from quiet signal returns. The 32 MHz operating rate makes trace-length control and return-path continuity important even though this MCU is intended primarily for embedded control.

Do not treat every R5F10FMEDFB ordering suffix as automatically interchangeable. Before substitution, compare the exact pin table, temperature grade, qualification status, flash configuration, peripheral set, operating-voltage limits, and lifecycle designation. R5F10FMEDFB#YK1 appears in a verified listing with the same headline configuration, while the other listed family variants still require confirmation of their suffix-specific attributes.

Информация о соответствии

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The JLCPCB product result identifies the exact MPN as RoHS. No additional REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification statement was established in the retrieved product information.

Данные проверены: 2026-11-10 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

R5F10FMEDFB#V0 R5F10FMEDFB#V0 datasheet R5F10FMEDFB#V0 pinout R5F10FMEDFB#V0 datasheet pdf R5F10FMEDFB#V0 equivalent R5F10FMEDFB#V0 replacement R5F10FMEDFB#V0 cross reference R5F10FMEDFB#V0 footprint R5F10FMEDFB#V0 price R5F10FMEDFB#V0 stock Renesas R5F10FMEDFB#V0 R5F10FMEDFB#V0 vs R5F10FMEDFB#YK1

Связанные компоненты & термины

Renesas Electronics R5F10FMEDFB#V0 R5F10FMEDFB#YK1 RL78 RL78/G1E 16-bit microcontroller embedded microcontroller flash memory 32 MHz 1.6 V to 5.5 V 8-bit ADC 12-bit ADC 80-LFQFP 12 mm by 12 mm package surface mount LQFP package family SMD industrial equipment control sensor interface module building automation node battery-powered monitoring RoHS embedded firmware semiconductor
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ