R5F10FMEDFB#V0 - 32MHz 64KB RL78/G1E MCU | Renesas
MPN: R5F10FMEDFB#V0 ✗ اختتامِ زندگیR5F10FMEDFB#V0 جائزہ
A microcontroller is a programmable semiconductor device that combines a processor core, memory, peripherals, and input/output interfaces on one integrated circuit. The RL78 family is Renesas's low-power embedded MCU family, while the G1E group targets general-purpose industrial, consumer, and equipment-control designs. The R5F10FMEDFB#V0 provides 64 KB of flash for firmware and 8-bit and 12-bit conversion capabilities identified in the product listing.
The primary specifications include a 32 MHz operating frequency, 16-bit CPU architecture, 64 KB flash memory, a 1.6 V to 5.5 V operating-voltage range, and an 80-LFQFP 12 mm by 12 mm package. These attributes make the part suitable for applications where a moderate amount of on-chip program storage, compact board area, and low-voltage operation are important.
The RL78/G1E architecture is positioned for embedded systems that need straightforward control functions rather than high-performance application processing. Its flash-based program memory supports firmware storage without requiring an external memory device in many designs. The package provides a larger pin count than small-outline packages, allowing more peripheral and signal options to be exposed when the board design requires extensive I/O.
Typical uses include industrial equipment controllers, sensor-interface boards, compact consumer products, building and access equipment, and low-voltage embedded control modules. Designers should confirm peripheral availability, pin multiplexing, memory requirements, operating-temperature limits, and electrical characteristics against the manufacturer datasheet before releasing a PCB design.
For a new layout, place the decoupling capacitors close to the appropriate power pins, route the oscillator and reset-related nets away from noisy switching nodes, and preserve the package-specific land pattern. Because this is an 80-pin LFQFP device, the exact footprint must be checked against the package drawing rather than inferred from a generic LQFP footprint.
This page combines the available product specifications, package information, sourcing context, comparison fields, and practical integration guidance for engineers evaluating the R5F10FMEDFB#V0 in an RL78/G1E design.
کے لیے ڈراپ اِن متبادل R5F10FMEDFB#V0 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں R5F10FMEDFB#V0 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Manufacturer, Product Type.
R5F10FMEDFB#YK1
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
R5F10FMEDFB
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
R5F10FMEDFB#U0
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
R5F10FMEDFB#X0
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →R5F10FMEDFB#YK0
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
R5F10FMEDFB#V0 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Type | 16-bit microcontroller |
| Series | RL78/G1E |
| Maximum Operating Frequency | 32 MHz |
| Flash Memory | 64 KB |
| Flash Organization | 64K x 8 bits |
| CPU Architecture | 16-bit |
| Operating Voltage Range | 1.6 V to 5.5 V |
| ADC Resolution | 8-bit and 12-bit |
| پیکیج | 80-LFQFP (12 x 12 mm) |
| Package Pin Count | 80 pins |
| ماؤنٹنگ ٹائپ | Surface mount |
| Manufacturer | Renesas Electronics |
| RoHS اسٹیٹس | RoHS |
R5F10FMEDFB#V0 80 pins پن کنفیگریشن گائیڈ
R5F10FMEDFB#V0 (80 pins پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں R5F10FMEDFB#V0.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
R5F10FMEDFB#V0 کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Equipment Control, Sensor Interface Module, Low-Voltage Access Equipment, Compact Consumer Controller, Building and Automation Node, Battery-Powered Monitoring Device.
Industrial Equipment Control
The R5F10FMEDFB#V0 fits compact industrial equipment controllers that require deterministic embedded control, a 32 MHz operating frequency, and 64 KB of on-chip flash. Its 80-LFQFP 12 mm by 12 mm package exposes a broad set of I/O options for sensors, indicators, actuators, and communication interfaces. The 1.6 V to 5.5 V operating range supports low-voltage embedded rails. For production use, verify the exact peripheral mix, temperature grade, timing limits, and EMC layout guidance in the Renesas datasheet before schematic release.
تجویز کردہ
Sensor Interface Module
The R5F10FMEDFB#V0 is appropriate for a multi-channel sensor interface module where a 16-bit RL78/G1E core can process measurements and manage local control functions. Its listed 8-bit and 12-bit conversion capability supports mixed-resolution acquisition requirements, while 64 KB of flash provides room for application firmware and calibration logic. The large 80-pin LFQFP package can simplify access to digital and analog-capable signals. Select external precision components and protection networks separately, and verify the exact converter channels and pin multiplexing in the manufacturer documentation.
تجویز کردہ
Low-Voltage Access Equipment
The R5F10FMEDFB#V0 can serve as the central controller in low-voltage access equipment, where firmware must coordinate input readers, lock or relay outputs, indicators, communications, and diagnostic behavior. The 32 MHz RL78/G1E processing rate supports responsive control tasks, and 64 KB flash accommodates a substantial embedded application. Its 1.6 V to 5.5 V range permits integration with low-energy power designs. Before deployment, review voltage thresholds, timing margins, peripheral availability, environmental qualification, and cybersecurity requirements with the device documentation.
تجویز کردہ
Compact Consumer Controller
The R5F10FMEDFB#V0 is suitable for a compact consumer-control board that manages buttons, indicators, sensors, and a small state machine without a separate external flash device. The 64 KB embedded program memory and 32 MHz clock provide a practical balance of capability and integration, while the 80-LFQFP package offers generous I/O access. The 1.6 V to 5.5 V operating range supports low-voltage system rails. Final selection should account for standby behavior, available timers and communication interfaces, pin multiplexing, and the exact package drawing.
تجویز کردہ
Building and Automation Node
The R5F10FMEDFB#V0 can implement a local building-automation node that reads environmental or occupancy inputs and controls outputs through a wired interface. Its 32 MHz 16-bit core and 64 KB flash are appropriate for protocol handling, debouncing, state management, and diagnostics, while the 80-pin package simplifies access to multiple I/O signals. The 1.6 V to 5.5 V operating range can simplify low-voltage rail design. Confirm peripheral availability, timing requirements, temperature range, and communication interfaces in the Renesas documentation before installation.
تجویز کردہ
Battery-Powered Monitoring Device
The R5F10FMEDFB#V0 can support a battery-powered monitoring device when its operating mode, analog functions, and power-consumption characteristics satisfy the design budget. The low-voltage 1.6 V to 5.5 V range aligns with many energy-harvesting and portable sensor architectures, and 64 KB flash permits integrated firmware without an external program-memory device. The 80-LFQFP package provides access to sensor and status-control signals. Verify standby and active current, regulator efficiency, ADC performance, and wake-up behavior before committing to a battery-life target.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا R5F10FMEDFB#V0 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | R5F10FMEDFB#YK1 | R5F10FMEDFB | R5F10FMEDFB#U0 | R5F10FMEDFB#X0 | R5F10FMEDFB#YK0 |
|---|---|---|---|---|---|---|
| Package | 80-LFQFP (12 x 12 mm) | 80-LFQFP (12 x 12 mm) | 80-LFQFP (12 x 12 mm) | 80-LFQFP (12 x 12 mm) | 80-LFQFP (12 x 12 mm) | 80-LFQFP (12 x 12 mm) |
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Maximum Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| CPU Architecture | 16-bit | 16-bit | 16-bit | 16-bit | 16-bit | 16-bit |
| Flash Memory | 64 KB | 64 KB | 64 KB | 64 KB | 64 KB | 64 KB |
| Operating Voltage | 1.6 V to 5.5 V | 1.6 V to 5.5 V | 1.6 V to 5.5 V | 1.6 V to 5.5 V | 1.6 V to 5.5 V | 1.6 V to 5.5 V |
| ADC Resolution | 8-bit and 12-bit | 8-bit and 12-bit | 8-bit and 12-bit | 8-bit and 12-bit | 8-bit and 12-bit | 8-bit and 12-bit |
| Series | RL78/G1E | RL78/G1E | RL78/G1E | RL78/G1E | RL78/G1E | RL78/G1E |
اہم امتیازی خصوصیات
- Combines 32 MHz processing with 64 KB flash in a general-purpose RL78/G1E device (بمقابلہR5F10FMEDFB#YK1)
- Uses a broad 80-LFQFP footprint for external I/O access (بمقابلہR5F10FMEDFB)
- Supports low-voltage embedded operation (بمقابلہR5F10FMEDFB#X0)
ڈیزائن نوٹس
Use the exact Renesas 80-LFQFP 12 mm by 12 mm land pattern rather than a generic 80-pin LQFP footprint. Confirm pin-1 orientation, exposed-pad treatment if applicable, solder-mask clearance, and recommended stencil dimensions from the package drawing. Place local decoupling capacitors adjacent to the associated supply pins and keep the ground return path short to reduce supply impedance during switching transitions.
Route oscillator, reset, programming, and sensitive analog inputs away from high-current switching nodes and connectors likely to inject transient noise. Keep sensor traces short where possible, provide a continuous ground reference beneath analog circuitry, and separate noisy return currents from quiet signal returns. The 32 MHz operating rate makes trace-length control and return-path continuity important even though this MCU is intended primarily for embedded control.
Do not treat every R5F10FMEDFB ordering suffix as automatically interchangeable. Before substitution, compare the exact pin table, temperature grade, qualification status, flash configuration, peripheral set, operating-voltage limits, and lifecycle designation. R5F10FMEDFB#YK1 appears in a verified listing with the same headline configuration, while the other listed family variants still require confirmation of their suffix-specific attributes.
تعمیل کی معلومات
The JLCPCB product result identifies the exact MPN as RoHS. No additional REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification statement was established in the retrieved product information.